Hello. I have an Erisin ANDROID 8.1 with MTCE_LM_V2.94_1
I wanted to upgrade to the latest system (in particular not to see that annoying volume bar in the middle of the display).
I know the procedure for upgrading well, but I can't find the correct dmcu.img file anywhere.
Thanks to those who will be able to help me
Related
I had this unit for some 2, 3 weeks now, and while it worked great initially, all of a sudden the radio app started acting up.
It starts with some garbage displayed (e.g. 'jV!fxcj') instead of radio station name, and it is not responsive at all. If I manage to get to home screen or to anywhere else, it will just pop back up to the front, and it keeps happening constantly, Sometimes, after doing who knows what, I manage to kill it, and I can use the rest of the head unit, but that happens rarely. I also tried going to the settings -> apps, and killing the app from there, but it doesn't help.
I hard reset the unit, and the radio worked fine for about five minutes, and then it started happening again. Is there a way to at least disable the Radio app somehow, so the unit is usable in some capacity?
I have exactly the same issue on my TR771L. I got an MCU update link to load onto an SD card but haven't been able to get it to install on the unit.
The looping is really annoying especially at night.
EDIT:
Android version 8.1.0
MCU version T8.3.19-36-10-E53201-180726
System version V9.3.1_2018082.102205_MLT5
I had that problem too and did an firmware update and it seems to be ok now
This might be a stupid question, but where do you get the firmware update from? Is there a custom ROM to be installed on it as well?
I was always confused by many similar but different headunits, and was never sure if something would work on mine or not. Is it PX5? Is it MTCE? Is it none of these? Sigh.
On a positive note, it seems to work better now. I uninstalled the automate car dashboard and know it happens rarely if ever, and even when it does, a hard reset with a pen solves it.
Well, I contacted xtrons with a request for the update file, and they provided a link - https://1drv.ms/u/s!AjrY0uqbW_kBk36dRnJD4d_aaej8
This is a system update file, and after I went through the versions I have are:
Android version 8.1.0
MCU version T8.3.19-36-10-E53201-180502
System version V9.3.1_20181012.103419_MLT5
4x4Rob said:
I have exactly the same issue on my TR771L. I got an MCU update link to load onto an SD card but haven't been able to get it to install on the unit.
The looping is really annoying especially at night.
EDIT:
Android version 8.1.0
MCU version T8.3.19-36-10-E53201-180726
System version V9.3.1_2018082.102205_MLT5
Click to expand...
Click to collapse
You need to extract the files from the RAR file, put them on the SD card or USB, connect it to the head unit, go to Settings -> Car settings and then scroll down and choose MCU update or System update. Depending on the file you got, it should detect the update files and ask you if you want to reset the sd card/usb (I choose no just to be safe) and it took a bit of time to update, and the start loading animation (xtrons) took a bit more time than usual, so don't worry about it.
Hello
I have just bought a new car that had an after market android system, however it is in recovery system v4.4.24, and runs Kitkat. I’m unable to use the system as the SD card provides doesn’t have the correct firmware on it to update the system. Does anyone know where i can download the correct firmware? apologies for lack on specific information; this is all I have to work with! thanks
Hello all, i have tryied to update my headunit to android 8 using PhoenixSuit, the upgrade process had gone right, but the headunit locks on the android start screen. And i am struggling with it for some months now.
I am unable to make it be recognized by phoenix suit again, nor make it boot to an USB or Mem card made by phoenixcard.
the only thing i could get was it to start in recovery mode, so it read files like:
51eb6df0-cad7-11e8-bf31-afdca4ac0826
52c7b3fa-cad7-11e8-8188-57adc8d05072.0
52c7b3fa-cad7-11e8-8188-57adc8d05072.1
etc.. the name of the files vary according to the "uboot" file i load on the headunit.
I have tryied lots of files gotten from russian foruns, etc to no sucess, even the original files that i got from the maker fails to start the unit.
If i had to guess the problem that make me unable to restore the original android 7.1 i got from the makers, it would be the partitions number and size, i think phoenixsuit had recreated the partitions in the upgrade process and that recovery mode does not change it... so any android that is not the version 8 (that seens to not work on my unit) does not get even to the start screen.
If someone can give me some tips on how to solve this, i had alread tried anything i could understand from the russian foruns and from here to no sucess
Thanks in advance.
So nobody knows how i can get into a "command prompt" mod where i can remake the system partitions or how i can get the headunit to boot from a phoenixcard created USB?
Hi, i need mcu for my android 1din car player, can someone help, i ask many peoples and they dont have it, if someone can help. My car audio player is cyclon 7101a
Hi All,
I have a 1280x480 8227l headunit.
It was running android 8.1 and I had a few problems. I found a junsun upgrade on here I thought great!
It didn’t use the ‘update android’ button in settings as the instructions were to put the bin and upd file on a flash drive and reboot.
I did all this however the resolution is all wrong I’m missing a chunk off the bottom and the side is blank. I can’t find anyway to fix this.
A bit more google provided me a couple for 8227l firmwares for 1280x480 unit.
The problem is they are just zip files and the option is no long there for update android in settings? Is there a way to manually do this or something?
I'm opening up thread for this unit (S5 model) with the latest MCU and Android firmware i got from the seller. If someone can make use of it.
MCU
ANDROID
android 12?
Can you get the firmware?
localos said:
android 12?
Can you get the firmware?
Click to expand...
Click to collapse
I think it's faked as 12, but in reality it's probably 10, juding by the securty patches date. Very sneaky of them, they advertise those units as 12.
Attached are both MCU firmware and android firmware. I don't think this unit has any other software besides that.
Can you provide firmware?
Thanks for the firmware. Did the seller also disclose how to flash it?
Can one get to the recovery?
bloke_vlado said:
Thanks for the firmware. Did the seller also disclose how to flash it?
Can one get to the recovery?
Click to expand...
Click to collapse
1.Download the two firmware from the two link in your computer, they are <update.zip> and <MCU.bin> , please do not unzip them.
2.Copy the <update.zip> document into your Udisk root path. And copy the <MCU> document into your Udisk root path.
3.Connect your Udisk to our player, and then follow settings-general-system upgrade, and then it will upgrade itself, please do not cut the power during the upgrade. And the player will reboot itself. This step will take about 6 minutes.
4.When you finish upgrading the system, then follow settings-General-MCU Upgrade- select the upgrade file -Confirm, and it will upgrade itself. This step will take about 1 minute.
5.After upgrade all, we also need to activate the weather APK, please set your cellphone WiFi hotspot name as FYQP5QRG, and connect the player WiFi to your cellphone hotspot, and then it will activate the weather APK. When you are using an iPhone, please do not connect your iPhone Bluetooth to our player before you activate the weather APK, it is very important. After you activate the weather APK, you can connect your iPhone Bluetooth normally.
6.The MCU upgrade may lead to the touch screen and touch panel not working correctly, please use your five fingers to long touch the screen and go to calibration mode to adjust the touch screen. And about the touch panel please follow the steps settings-factory-8888-ok-touch learning button, in this way you can set it correctly.
7.After the upgrade, you need to set the correct CANBUS type if your car has CANBUS system ,please follow the steps settings-factory-8888 ok-car model
8.The firmware upgrade may lead to the Carletter APK not activated, please take the picture of QR code and send to us, we will activate it for you.
Hi fellow, can you share please the firmware ?
mariodantas said:
Hi fellow, can you share please the firmware ?
Click to expand...
Click to collapse
Hi Mario, you can find different firmware versions for the QF001 here: https://forum.xda-developers.com/t/...2s-not-fyt-based.4541261/page-3#post-88260499