Hi,
My mini's glass panel (digitizer) cracked. The HTC Customer Care is charging too much for it so I thought of replacing it myself. The problem is I googled and can't find any DIY instuctions. Does anyone know how to replace it?
Has anyone has bought the digitizer from ebay?... please share your experience ... how do you find it compared to the original?
Thanks!
javed_karim said:
Hi,
My mini's glass panel (digitizer) cracked. The HTC Customer Care is charging too much for it so I thought of replacing it myself. The problem is I googled and can't find any DIY instuctions. Does anyone know how to replace it?
Has anyone has bought the digitizer from ebay?... please share your experience ... how do you find it compared to the original?
Thanks!
Click to expand...
Click to collapse
See here
????://i-thinkbig.blogspot.com/2010/08/htc-hd-mini-changing-touch-screen.html[/url]
attention is glued!
ciao
I did this yesterday. Pretty easy if you're patient.
Just remember to not remove the black adhesive round the edge.
And don't touch the LCD... Use gloves!
Hello.
My LCD Screen broke and touch function doesn't work...
Does anyone know how to contact LG or Google to repair my phone?
There's any trust place were I can buy a screen? it's easy to change it?
PS: the LCD screen is very sensible, just fall from 30cm and broke...
Thank you.
I think it is lg and around $140. There is a thread a guy did on it.
Sent from my Nexus 4 using Tapatalk 2
Hi everyone, recently i bought from a friend a n4 with replaced front screen after cracked digitizer. The proximity sensor was not working causing the screen to stay black during making/receiving a call. I googled it and found out it is a pretty common issue after screen replacement and the only workaround was to put some very thin clear tape or a small piece from a screen protector, between the front glass and the proximity sensor. I tried that for a fair amount of time but with no luck. So i tried to put the small rubber piece that covers the light and proximity sensor the opposite way. Now the bigger hole of this rubber piece is on the small sensor (proximity) and the small hole is on the big sensor (light). It worked right away and still works great after a month, The light sensor seems to work fine as well. Confirmed working from another guy as well. So i hope this helps whoever facing same problem after screen replacement. :good:
Sp_Ark said:
Hi everyone, recently i bought from a friend a n4 with replaced front screen after cracked digitizer. The proximity sensor was not working causing the screen to stay black during making/receiving a call. I googled it and found out it is a pretty common issue after screen replacement and the only workaround was to put some very thin clear tape or a small piece from a screen protector, between the front glass and the proximity sensor. I tried that for a fair amount of time but with no luck. So i tried to put the small rubber piece that covers the light and proximity sensor the opposite way. Now the bigger hole of this rubber piece is on the small sensor (proximity) and the small hole is on the big sensor (light). It worked right away and still works great after a month, The light sensor seems to work fine as well. Confirmed working from another guy as well. So i hope this helps whoever facing same problem after screen replacement. :good:
Click to expand...
Click to collapse
This worked for me too, thank you very much for the tip! I would never come up with this solution by myself, really tried everything without success before finding your post! :good:
Sp_Ark said:
Hi everyone, recently i bought from a friend a n4 with replaced front screen after cracked digitizer. The proximity sensor was not working causing the screen to stay black during making/receiving a call. I googled it and found out it is a pretty common issue after screen replacement and the only workaround was to put some very thin clear tape or a small piece from a screen protector, between the front glass and the proximity sensor. I tried that for a fair amount of time but with no luck. So i tried to put the small rubber piece that covers the light and proximity sensor the opposite way. Now the bigger hole of this rubber piece is on the small sensor (proximity) and the small hole is on the big sensor (light). It worked right away and still works great after a month, The light sensor seems to work fine as well. Confirmed working from another guy as well. So i hope this helps whoever facing same problem after screen replacement. :good:
Click to expand...
Click to collapse
only one thing : 1.000.000 Thanks. It worked for me too .... I spent so many hours to fix that shi#&*.. with no success and your tip is WORKING in less than 5 secondes ... !!!
you made my day.... good job ...
I just wanted to give a quick thanks to the OP of this thread.
I just did a mass purchase of screens from HK to fix 4 phones.
3 Nexus 4's and 1 Optimus G lcd / digitizer / frames replaced and the proximity sensor would not work on any of them. After much assembly and disassemble I found this thread.
The quick fix of turning the rubber gasket to the wrong holes on the sensor fixed them all! I dont know why it works, but it does work!
They all now work perfectly.
I used: Proximity Sensor Finder for troubleshooting while trying to find a fix and verify the fix.
Worked for me too. Thanks OP!
i have this problem too can please someone post some photos?
effry said:
i have this problem too can please someone post some photos?
Click to expand...
Click to collapse
This is the video I followed, it shows it pretty clearly: https://www.youtube.com/watch?v=AZDAIgwbXk4#t=522
effry said:
i have this problem too can please someone post some photos?
Click to expand...
Click to collapse
maxwelldiamonds said:
This is the video I followed, it shows it pretty clearly: https://www.youtube.com/watch?v=AZDAIgwbXk4#t=522
Click to expand...
Click to collapse
That would be correct, if you follow the steps on that video with regards to the proximity sensor, it would be installed correctly and the holes would line up perfectly between the gasket and sensors. However, that doesnt seem to work, you want to now install with the tab facing the other way, you will now see that the holes do not line up correctly and the gasket is partially covering the sensors, dont panic, that is what you want it to look like. Now put it back together, download a proximity app and make sure it works.
This fix worked for me too.
Thank you so much!
It works! Fixed! Thanks
Hi guys,
sorry to OT in this thread, but seems related.
After changing the position of the rubber thing, the proximity sensor works fine, but the light sensor reports values between 0 and 80lux, and I think it's wrong since it goes up to 10000lux.
Is this a problem of -again- the rubber part, or maybe it's just my screen that comes with a faulty light sensor?
Thanks!
MajinJoko said:
Hi guys,
sorry to OT in this thread, but seems related.
After changing the position of the rubber thing, the proximity sensor works fine, but the light sensor reports values between 0 and 80lux, and I think it's wrong since it goes up to 10000lux.
Is this a problem of -again- the rubber part, or maybe it's just my screen that comes with a faulty light sensor?
Thanks!
Click to expand...
Click to collapse
Probably it's the rubber part. Just try without it to see what values you get. If it works then you might have to try make the hole a bit wider. My light sensor worked ok after this fix, but wasn't as sensitive as it should, played a bit with lux and auto brightness settings (any custom rom have such settings - there are some apps as well or xposed framework + gravity box) solved everything.
Sent from my LG-LS980 using Tapatalk
same issue
can someone please tell me where to buy this rubber part because it's missing on my n4, probably lost during screen replacement, i looked on line for supplier i couldn't find one, even on ebay. thanks.
Sp_Ark said:
Probably it's the rubber part. Just try without it to see what values you get. If it works then you might have to try make the hole a bit wider. My light sensor worked ok after this fix, but wasn't as sensitive as it should, played a bit with lux and auto brightness settings (any custom rom have such settings - there are some apps as well or xposed framework + gravity box) solved everything.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Thanks for the idea, man. As soon I will have some spare time I will try..
dihcar said:
can someone please tell me where to buy this rubber part because it's missing on my n4, probably lost during screen replacement, i looked on line for supplier i couldn't find one, even on ebay. thanks.
Click to expand...
Click to collapse
The only suggestion pops up in my mind is to buy a "very broken" nexus 4 on ebay, but it could cost you so much money that I am not sure it worth it..
It works! Thanks ! You are amazing !
dihcar said:
can someone please tell me where to buy this rubber part because it's missing on my n4, probably lost during screen replacement, i looked on line for supplier i couldn't find one, even on ebay. thanks.
Click to expand...
Click to collapse
To find only the rubber part as a listed product is impossible. You should search for n4 proximity sensor as a spare part and ask the seller if he can send only this rubber thing. If you plan to buy a proximity sensor you should double check that this rubber is included, cause usually is not, but iv seen listings that already have it at their photos.
Sp_Ark said:
To find only the rubber part as a listed product is impossible. You should search for n4 proximity sensor as a spare part and ask the seller if he can send only this rubber thing. If you plan to buy a proximity sensor you should double check that this rubber is included, cause usually is not, but iv seen listings that already have it at their photos.
Click to expand...
Click to collapse
Yeah I found out it cannot be bought anywhere. Right now I'm using proximity screen off app until I can do something about it.
dihcar said:
Yeah I found out it cannot be bought anywhere. Right now I'm using proximity screen off app until I can do something about it.
Click to expand...
Click to collapse
There is a proximity off xposed module
Sp_Ark said:
There is a proximity off xposed module
Click to expand...
Click to collapse
It's not working on my rooted n4, can't open it.
---------- Post added at 05:53 PM ---------- Previous post was at 05:50 PM ----------
Sp_Ark said:
There is a proximity off xposed module
Click to expand...
Click to collapse
It's not working on my rooted n4, can't open the app.
Have you ever used xposed before? You have to enable the module via xposed settings and then reboot. Then the app should start.
Hey everyone I need a few questions answered for a cracked screen. I slipped and dropped my phone and cracked the screen and the touchscreen doesnt work anymore. I was wondering would I need both a digitizer and lcd screen? Or can I just get one or the other. Please help me Im using a lg optimus now it sucks!! And normally where can you find the cheapest repair parts?
So my camera glass broke today. I have no idea how it happened. I have been looking all over the internet for a replacement but can't find one and don't even know where to look. Any suggestions?
Check the thread that already exists for this to see if there's an answer there.