Related
I was rooted, had xposed installed and realized that the fingerprint scanner is much slower and not as responsive as when i am on stock B27 or just stock and rooted.
Stock = less than a second to unlock
Stock + root = less than a second to unlock
Stock + root + xposed (without modules yet) = more than a second to unlock and device performance seems to take a hit. UI lags very often.
I have tried this on a clean setup as well same issue. anyone else with xposed having similar or better experience?
clementinox said:
I was rooted, had xposed installed and realized that the fingerprint scanner is much slower and not as responsive as when i am on stock B27 or just stock and rooted.
Stock = less than a second to unlock
Stock + root = less than a second to unlock
Stock + root + xposed (without modules yet) = more than a second to unlock and device performance seems to take a hit. UI lags very often.
I have tried this on a clean setup as well same issue. anyone else with xposed having similar or better experience?
Click to expand...
Click to collapse
I had the same issue on b20, but couldn't figure out what was causing it. Do you have gravitybox? Maybe some part of it is affecting how quickly the phone wakes up?
clementinox said:
[...] Stock + root + xposed (without modules yet) [...]
Click to expand...
Click to collapse
xxBrun0xx said:
[...] Do you have gravitybox? [...]
Click to expand...
Click to collapse
I guess not.
Loader009 said:
I guess not.
Click to expand...
Click to collapse
Sorry, wasn't fully awake when I read your post. I'll try installing Xposed and see if there's a noticeable delay.
xxBrun0xx said:
Sorry, wasn't fully awake when I read your post. I'll try installing Xposed and see if there's a noticeable delay.
Click to expand...
Click to collapse
I had modules before (xprivacy, xposed additions and Audio Stream Music Default). But on the clean install I had just xposed and still the same issue.
Looks to me that there might be some interfering between Mifavor UI and xposed.
They should really consider going stock when they release Nougat. Less hassle for them to maintain and easier for us to deal with.
clementinox said:
I had modules before (xprivacy, xposed additions and Audio Stream Music Default). But on the clean install I had just xposed and still the same issue.
Looks to me that there might be some interfering between Mifavor UI and xposed.
They should really consider going stock when they release Nougat. Less hassle for them to maintain and easier for us to deal with.
Click to expand...
Click to collapse
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
xxBrun0xx said:
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
Click to expand...
Click to collapse
I also on latest firmware no issues on finger print unlock... Using gravity box also
Sent from my ZTE A2017U using Tapatalk
Sorry this is off topic, but what kind of tweaks do you guys use Gravity Box for in regards to this phone?
xxBrun0xx said:
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
Click to expand...
Click to collapse
`SBR` said:
I also on latest firmware no issues on finger print unlock... Using gravity box also
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply guys!
I think I might have figured the root cause of the issue. I installed my modules one by one and realized that uninstalling xprivacy module fixed the issue. It's unfortunate since it was one of my favourite modules
my modules for whoever is interested:
-Audio Stream Music Default - pressing volume keys anytime changes media volume instead of ringtone volume
-xposed additions - cutomize volume keys with multiple taps, long presses for multiple use on lockscreen, screen on/off (i use it for long press volume up or down to switch tracks)
-xprivacy - to control what permissions apps use (but doesnt seem to work with MiFavor so i disabled it)
I had this problem while I was on b20, it went back to normal after I went and updated to b27 via @DrakenFX 's method.. When I came back up with b27, root, xposed, bl unlock, haven't had the slow fingerprint problem If it helps anyone else..
xxBrun0xx said:
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
Click to expand...
Click to collapse
`SBR` said:
I also on latest firmware no issues on finger print unlock... Using gravity box also
Click to expand...
Click to collapse
I'm having issues using Gravitybox. I get the "Gravitybox module not responding" message.
Other modules are ok.
How did you install it?
Odeen_c said:
I'm having issues using Gravitybox. I get the "Gravitybox module not responding" message.
Other modules are ok.
How did you install it?
Click to expand...
Click to collapse
are you in latest Xposed and Gravitybox for MM?
enable the gravity Box and do a complete reboot.. for safer side click give permission to Storage before opening the app. that's all i tried and it works no issues.
`SBR` said:
are you in latest Xposed and Gravitybox for MM?
enable the gravity Box and do a complete reboot.. for safer side click give permission to Storage before opening the app. that's all i tried and it works no issues.
Click to expand...
Click to collapse
Do I have to give permissions to xposed or gravitybox? How do du do that? In app info->permissions?
Odeen_c said:
Do I have to give permissions to xposed or gravitybox? How do du do that? In app info->permissions?
Click to expand...
Click to collapse
App info> permission for gravity box... By default it should ask when you open gravity box
Sent from my ZTE A2017U using Tapatalk
`SBR` said:
App info> permission for gravity box... By default it should ask when you open gravity box
Click to expand...
Click to collapse
Unfortunately it doesn't work. It doesn't ask me to grant permissions.
All I get is this...
Odeen_c said:
Unfortunately it doesn't work. It doesn't ask me to grant permissions.
All I get is this...
Click to expand...
Click to collapse
can you share the screenshots of Xposed, it's not recognize the Xposed installed or activated in your phone.
`SBR` said:
can you share the screenshots of Xposed, it's not recognize the Xposed installed or activated in your phone.
Click to expand...
Click to collapse
Here it is
Odeen_c said:
Here it is
Click to expand...
Click to collapse
Looks strange... Not sure what is creating the issue...
Here is mine
Sent from my ZTE A2017U using Tapatalk
Odeen_c said:
Here it is
Click to expand...
Click to collapse
Can you check if the module is activated under the modules tab in the xposed app
clementinox said:
Can you check if the module is activated under the modules tab in the xposed app
Click to expand...
Click to collapse
Currently it's not activated.
But 2 days ago, when I installed it firstly, after reboot I couldn't use the phone: it couldn't even get to the pin screen. It was continously doing a screen on and off.
I had to uninstall gravitybox via adb from my pc.
But it has to work (it says you have to activate it) even if it's not activated. At least, on my other device (Moto x style) it does.
I have tested this only on AOSP Extended(mido)
Everyone try and test on other roms and tell if its working.
Download/Source/Credit:
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
AOSP ROM v4.3 mido
only got a black screen.
edit
phone is working its just the screen is black cannot see anything except when I hold the power button it shows poweroff,restart,etc... menu
is there any requirements / process before flashing xposed?
langamer101 said:
AOSP ROM v4.3 mido
only got a black screen.
edit
phone is working its just the screen is black cannot see anything except when I hold the power button it shows poweroff,restart,etc... menu
is there any requirements / process before flashing xposed?
Click to expand...
Click to collapse
no.
try it on freshly flashed rom...
i tried it on aex 4.2 and it worked
Which xposed modules you tried are working??? @bad_request
ayush.gl said:
Which xposed modules you tried are working??? @bad_request
Click to expand...
Click to collapse
As far as I know, flat styled indicators (kinda) working
I kno the power of xposed but still is it required coz rom provude a lot of customisation already and app are also available to do its job
ayush.gl said:
Which xposed modules you tried are working??? @bad_request
Click to expand...
Click to collapse
I have tried minmingaurd xposed module and it's working properly.
prathu30 said:
I kno the power of xposed but still is it required coz rom provude a lot of customisation already and app are also available to do its job
Click to expand...
Click to collapse
if you have known the power of xposed you shouldn't have said that....
Will it work on rr latest build??
ayush.gl said:
Will it work on rr latest build??
Click to expand...
Click to collapse
gonna test it on rr rom today...
ayush.gl said:
Will it work on rr latest build??
Click to expand...
Click to collapse
I tried it on rr rom, rom boot and xposed framework installed, minmingaurd worked and also tried lucky patcher Xposed module... that didn't work out.
Youtube adway and networkmode enabler works?? Please try
bad_request said:
if you have known the power of xposed you shouldn't have said that....
Click to expand...
Click to collapse
Most features of Gravity box bootmanager privacy manager are inbuilt in most rom for ads thers adaway
And not to forget magisk module
Unable to flash framework on miui Android 7
prathu30 said:
Most features of Gravity box bootmanager privacy manager are inbuilt in most rom for ads thers adaway
And not to forget magisk module
Click to expand...
Click to collapse
I know that bro that we get most of the features inbuilt in roms and other can be added using apps and magisk....
but not all roms provides most of the features and also neither apps nor magisk can fulfill the needs of Xposed framework etc.
There are lots of Xposed modules whose alternative still not found...
For example adaway don't blocks all ads system wide as it only modifies the hostfile so thier still space left for ads even if it is blocked by the hostfile...
MinMinGuard removes the ad space which are left by Adaway.
There are lots of example but I can't explain them all to you.
Rnayar18 said:
Unable to flash framework on miui Android 7
Click to expand...
Click to collapse
bro MIUI rom for RN4 is 7.0(sdk24 )
xposed framework for nougat is only for 7.1.x(sdk25) for now
I'm facing so many force closes, it's not that stable i think.
langamer101 said:
AOSP ROM v4.3 mido
only got a black screen.
edit
phone is working its just the screen is black cannot see anything except when I hold the power button it shows poweroff,restart,etc... menu
is there any requirements / process before flashing xposed?
Click to expand...
Click to collapse
It's a substratum theme problem. Im almost 100% sure.
Several apps keeps force closed when xposed is on.
(YouTube, Nova Launcher, Greenify, etc)
Turned off xposed by Xposed Installer option then everything alright. I think i'll wait for the stable official one.
Current rom : latest RR
Greenify, adaway and background playback is not working
Flash at your own RISK!
Tested on T-Mobile,AT&T,Verizon & Sprint
How to install Xposed on your Snapdragon S8+
I want to thank the man @elliwigy for making root happen!
I also want to thank @ErnyTech for making Xposed happen also!
Now it's time to share how to install this bad boy on Snapdragon S8+
First, you will need is flash fire and root to make this work!
Make sure you download these files to get Xposed to work people it's an easy way to work
1.https://forum.xda-developers.com/devdb/project/dl/?id=25965
2.https://drive.google.com/uc?export=download&id=0B8N7MRg8VIZRMVN5eFVEdGdoaFU
Make sure you get the updated version for link number 1
Installed apk first then in flash fire make you put Android Nougat SDK24 7.0 into the flash zip or ota section
MAKE SURE! you dont check auto-mount and mount/system read/then just hit the check on the top right corner
After let it do its magic and hit flash and ones it boots back up Xposed should be working
List of modules that work as of 8/28/2017 7:32 pm north-west time
GravityBox (N) (https://forum.xda-developers.com/attachment.php?attachmentid=4236823&d=1502286810)
Ifont
Magisk App Only (Test) (https://www.apkmirror.com/apk/topjo...se/magisk-manager-5-2-0-android-apk-download/)
3C Toolbox Pro
All my...
Adblocker Reborn
AFWall+
App locale
App settings
AppOpsXposed
Awesome pop-up video
Better Battery Saver
Blurred SystemUI (LP)
Boot Manager
Call Blacklist Pro
Cool Tool
CrappaLinks
Device ID changer
Disable Flag Secure
Enhanced Toasts
Exi for Swiftkey
Fake Gapps
Fake Wifi Connection
Fingerprint enabler
Flat style bar indicator
ForceDoze
Force Immersive Mode
GNL App Hider
Google Search Bar Destroyer
GravityBox
HaveOwnOrientation
Hide Carrier
InstallerOpt
Lataclysm 1.32
Lightning Wall
Lockscreen tweakbox
MaxLock
MyAndroidToolsXposed
My Day Off Messenger Xposed
Native clipboard
No Device Check
No Lock Home for 5.x/6.0
No Lockscreen Wallpaper
NSFW GBoard
One-Hand Mode Xposed Mod
Obb on SD
Pixel Settings (Update for Nougat is released)
Play store changelog
PowerNap
Prevent Running
Qs X tiles per row
Receiver Stop
Re-Enable Screenshot
RootCloak
Screen off animation
Smart Network 1.7.1
Status bar cleanup
Statusbar Download Progress
Screenshot Delay Remover - Mod
Suggestions Toggle
Text Aide
Tumblr AdAway
Unique controls
Unrestrictedgettasks
XInsta
XinternalSd works
X Messenger Privacy Premium
Xposed edge
Xposed one tap for Facebook
Xposed one tap for YouTube
Xposed StatusBar Text
XPrivacy
XNotifications
Xtended Navbar
YouTube Adaway
YouTube background playback
XVolume30
Disable Samsung Gear Manager Notification
Lucky Patcher
Burnt Toast
ButteredToast
Copy Toast
Partially Working:
Amplify: convert in System App and change all files permission to 777, SELinux permisive
Flat style bar indicators: works with signal, wifi, clock, battery being themed
Lollistat: module works with some apps
Minminguard: Makes some apps Crash better not use it at the moment
Obb on Sd: works perfectly on SD650/SD820; Works partially on SD835).
Physical Button Music Control: Some Users reported its working, for some not
Snapprefs : SC randomly crash , most of the features don't work BUT saving is okay (via 'Autosave' , not 'save Button')
Use USB for marshmallow
I want to say thanks to these people for sharing their discoveries
@cameljockey1
@TheLastSidekick
@Interceptor777
@luderbeck1
HIT THE BIG THUMPS UP AND SHARE!
ALSO, Hit the 5 Stars PLEASE!
Sweet, thanks!
but is it stable
What modules have you tried that Work?
Sent from my SM-G955U1 using Tapatalk
MINTED7 said:
but is it stable
Click to expand...
Click to collapse
i had no issues with it so far been running it for a few days now
dogredwing1 said:
What modules have you tried that Work?
Sent from my SM-G955U1 using Tapatalk
Click to expand...
Click to collapse
t-mobile and AT&T s8+ i don't have other phones
3
walkerblue2023 said:
t-mobile and AT&T s8+ i don't have other phones
Click to expand...
Click to collapse
he meant what xposed apps work
---------- Post added at 04:26 AM ---------- Previous post was at 04:25 AM ----------
walkerblue2023 said:
t-mobile and AT&T s8+ i don't have other phones
Click to expand...
Click to collapse
he meant what xposed module apps work
---------- Post added at 04:27 AM ---------- Previous post was at 04:26 AM ----------
no idea why that double replied
MINTED7 said:
he meant what xposed apps work
Click to expand...
Click to collapse
I only have a few of them I use and they work so far
Any chancw this works on the s8?
wildermjs8 said:
Any chancw this works on the s8?
Click to expand...
Click to collapse
give it a try and let me know and if it does so we can let people know about it
Well, I'm officially getting old I guess...
Was hoping to see if root cloak works and I see that hasn't been supported for a while. So, I went ahead and uninstalled using the uninstaller.zip arm64 for sdk 24, most recent version.
Anyone wondering;
Uninstalling, for me, went just as easy as installing.
Sounds like everything, for 7.0+ is still in beta/testing by rovo so do all this at your own risk.
the1stSecond said:
Well, I'm officially getting old I guess...
Was hoping to see if root cloak works and I see that hasn't been supported for a while. So, I went ahead and uninstalled using the uninstaller.zip arm64 for sdk 24, most recent version.
Anyone wondering;
Uninstalling, for me, went just as easy as installing.
Sounds like everything, for 7.0+ is still in beta/testing by rovo so do all this at your own risk.
Click to expand...
Click to collapse
I don't see the point in uninstalling because root clock doesn't work though, eitherway you can't use Knox or SafetyNet so might as well have Xposed.
Also there is another module called No Device Check which lets you use simpler apps like Snapchat, Mario Run, Pokemon GO etc... no Android Pay though.
Interceptor777 said:
I don't see the point in uninstalling because root clock doesn't work though, eitherway you can't use Knox or SafetyNet so might as well have Xposed.
Also there is another module called No Device Check which lets you use simpler apps like Snapchat, Mario Run, Pokemon GO etc... no Android Pay though.
Click to expand...
Click to collapse
Good point, and I'm sure I'll reinstall at some point.
I'll try out the module you recommended as well, thanks!
Don't know if first link is down or if it's my phone but it doesn't let me click on it, I still found the apk but just fyi OP
Maurylucha said:
Don't know if first link is down or if it's my phone but it doesn't let me click on it, I still found the apk but just fyi OP
Click to expand...
Click to collapse
thanks for letting me know updated the link should be good to go
So just load then don't check anything and flash, your Instructions should be a bit clear
Sent from my SM-G955U1 using Tapatalk
@walkerblue2023 Did you make any changes to the source?
ErnyTech said:
@walkerblue2023 Did you make any changes to the source?
Click to expand...
Click to collapse
No I didn't do anything
thatotherguy.. said:
So just load then don't check anything and flash, your Instructions should be a bit clear
Click to expand...
Click to collapse
I think it's pretty clear on how too
Cool. Awesome dude ! This community is amazing ! I will install when a i get home ! and hey we should keep installing modules and then the OP should insert the ones that work into the main post. If you wanted to. Just a suggestion, because a lot of people will ask what works and what doesn't unless there is a list already. Thanks for the information. !
This threat will be for useful magisk modules for our great sagit. More helpful will be modules not present in magisk repo
I'm starting first:
1.Debloater v13.4 - Debloating MIUI Apps
2.Google Sans MOD Font v1 - Different Font
3.Mi 6 ALL in One Mod by Danilo v1.5 (dan3840) - Couple of mods specially for Mi6 (round corners, 1080p,120fps etc.)
4.YouTube Vanced black themed v13.18.54 - Best YouTube black (noAd) mod
1.Xposed systemless by rovo89 for Xposed framework
2.Enable camera2api by zanglang for enabling the GCam support
3.Icebox plugin for speedup the Ice box's freezing and defrosting
1. Enable camera2api (for google camera hdr+)
2.Dolby Atmos Classic (Better and louder sound)
pCloudsp said:
1.Xposed systemless by rovo89 for Xposed framework
2.Enable camera2api by zanglang for enabling the GCam support
3.Icebox plugin for speedup the Ice box's freezing and defrosting
Click to expand...
Click to collapse
Which sdk using are you for mi 6?
(When I Try install xposed, my mi 6 stuck bootloop)
Destiny97 said:
1. Enable camera2api
2.Dolby Atmos Classic
Which sdk using are you for mi 6?
(When I Try install xposed, my mi 6 stuck bootloop)
Click to expand...
Click to collapse
sdk25 xposed 89.2 systemless
disable resource hook first
pCloudsp said:
sdk25 xposed 89.2 systemless
disable resource hook first
Click to expand...
Click to collapse
How can I do that?
I found in xposed settings! Thank You!
Are you guys using Xposed on Oreo? If yes, what sdk version and settings? I get stuck on bootloop even when I disable resource hooks.
Sent from my MI 6 using Tapatalk
brwolfgang01 said:
Are you guys using Xposed on Oreo? If yes, what sdk version and settings? I get stuck on bootloop even when I disable resource hooks.
Click to expand...
Click to collapse
I use the sdk 27 90.0-beta1 i suppose beta 3 will work too but idk why i haven't updated it ?
You should disable resource hook before flashing the zip and use the compatible apk it was called xposed magisk apk easy to find
ArinAbdul said:
I use the sdk 27 90.0-beta1 i suppose beta 3 will work too but idk why i haven't updated it [emoji28]
You should disable resource hook before flashing the zip and use the compatible apk it was called xposed magisk apk easy to find
Click to expand...
Click to collapse
Oh you mean I need to flash Xposed via this app instead of Magisk?
Sent from my MI 6 using Tapatalk
brwolfgang01 said:
Oh you mean I need to flash Xposed via this app instead of Magisk?
Click to expand...
Click to collapse
No you need to install the apk then flash thr zip I flashed it in twrp do the same as mine worked fine also before booting i wiped dalvik cache
pCloudsp said:
sdk25 xposed 89.2 systemless
disable resource hook first
Click to expand...
Click to collapse
What Dobly module version are you using?
zeCosta said:
What Dobly module version are you using?
Click to expand...
Click to collapse
Is there even a difference apart from interface?
pi4a7a said:
Is there even a difference apart from interface?
Click to expand...
Click to collapse
I dont know. Im looking for a version that works on mi 6. I tryed couple ones and it didint work.
zeCosta said:
I dont know. Im looking for a version that works on mi 6. I tryed couple ones and it didint work.
Click to expand...
Click to collapse
try the classic one
zeCosta said:
What Dobly module version are you using?
Click to expand...
Click to collapse
Actually both le pro 3 and le max 2 are working. But if you want to install viper and dolby together, you will need to install old version of VIPER.
pCloudsp said:
Actually both le pro 3 and le max 2 are working. But if you want to install viper and dolby together, you will need to install old version of VIPER.
Click to expand...
Click to collapse
You can use arise so you can both have dolby and viper (yes the latest 2.5.0.5 one) plus the magisk compatibility module with the mod. Just configure install options in arise_customize.prop file then flash the zip. And you can try, add/delete other mods (included in arise) by creating other arise_customize.prop files and reflash the same zip to do it too.
I use FRONTCAM_PORTRAIT_FIX. It has officially turned my phone into a Pixel.
mahdif62 said:
I use FRONTCAM_PORTRAIT_FIX. It has officially turned my phone into a Pixel.
Click to expand...
Click to collapse
That a magisk module? Hand it over.
pi4a7a said:
That a magisk module? Hand it over.
Click to expand...
Click to collapse
Here you go: https://forum.xda-developers.com/mi-6/themes/support-gcam-hdr-mi6-t3758876/post75777225#post75777225
Anyone can tell me how can Google DNS module help us?
pi4a7a said:
Anyone can tell me how can Google DNS module help us?
Click to expand...
Click to collapse
i flashed this module today. its working ( at least for me ) but ping time become so bad about 400ms. my ping time with my internet provider is about 25ms.
Hi guys! Here is some guide how to get Android P appearance on our Nexus 5 devices.
You need to have:
1) Rootless Pixel 2 Launcher by paphonb
https://github.com/paphonb/PixelLauncherModV6/releases (download latest release)
better to install it like system app instead default launcher
2) Android P-ify module by paphonb
https://github.com/paphonb/AndroidP-ify/releases (download latest release)
It's a Xposed module, so firstly you have to install latest Xposed Framework V90-beta3 and Xposed Installer
3) Pi Light [substratum] by Christopher Kardas
https://play.google.com/store/apps/details?id=me.HarshV23.PiLight (for Light theme)
https://play.google.com/store/apps/details?id=me.HarshV23.PiDark (for Dark theme)
BE CAREFUL! This Substratum theme has some the same features like in Android P-ify, so you have enable only two features!
You need to enable:
- Android System (select Large StatusBar (Essential Ph1)) see screenshoot
- System UI (select Rounded Corners) see screenshoot
4) Navigation Bar. I use SmartBar with custom icons of buttons.
Go to Settings -> Extentions-> Navigation -> Navigation Bar;
then select SmartBar in Navigation mode and go to SmartBar settings;
after enable Edit Mode and change icons of navigation buttons using attachments below.
Also I've set navbar height to 80%.
ic_sysbar_home_dark.png + ic_sysbar_action_dark.png (for Light theme accent)
ic_sysbar_home_light.png + ic_sysbar_action_light.png (for Dark theme accent)
5) Google Product Sans font.
Install Magisk Manager and open it. Download "Google Product Sans" module, install it and reboot device.
If you want the clock widget like this - follow the post: https://forum.xda-developers.com/showpost.php?p=76743037&postcount=16
All of this actions I was doing on AOSP Extended ROM V5.5 (also works fine on 5.7)
but you can try it on any other Oreo 8.1 ROM
ENJOY IT! :fingers-crossed:
### SCREENSHOOTS ###
Thank you very much. I installed RR on my nexus 5 + Franco Kernel + Google Pixel Bootlogo+animation + this guide. My nexus 5 got new life
hey bro does this work with AOSP Extended Oreo rom? and btw which oreo rom were you using please?
driton.talinoci said:
hey bro does this work with AOSP Extended Oreo rom? and btw which oreo rom were you using please?
Click to expand...
Click to collapse
I'm just using AEX 5.5
I am having problems with PI Light substratum.
I enabled it but nothing happens
matusala said:
Thank you very much. I installed RR on my nexus 5 + Franco Kernel + Google Pixel Bootlogo+animation + this guide. My nexus 5 got new life
Click to expand...
Click to collapse
Care to share the link for:
Google Pixel Bootlogo + animation ?
lakija said:
I am having problems with PI Light substratum.
I enabled it but nothing happens
Click to expand...
Click to collapse
try to reboot or restart UI
daedric said:
Care to share the link for:
Google Pixel Bootlogo + animation ?
Click to expand...
Click to collapse
It's the first topic in "Nexus 5 Themes and Apps" https://forum.xda-developers.com/showthread.php?t=3792369
daedric said:
Care to share the link for:
Google Pixel Bootlogo + animation ?
Click to expand...
Click to collapse
I'm using this: http://rgho.st/6KgTP6vpl
First off, thank you OP for sharing this. However, some users have pointed out to me that an unofficial site was linked to share the Pi light Substratum theme I published. Could you kindly have the official Play Store link in your post, not a third party site? I don't endorse the use of APK Pure in any way. Cheers! :highfive:
Chris_Kardas said:
First off, thank you OP for sharing this. However, some users have pointed out to me that an unofficial site was linked to share the Pi light Substratum theme I published. Could you kindly have the official Play Store link in your post, not a third party site? I don't endorse the use of APK Pure in any way. Cheers! :highfive:
Click to expand...
Click to collapse
Yes, sure) I've updated link to official Play Store page.
0x7E1 said:
Yes, sure) I've updated link to official Play Store page.
Click to expand...
Click to collapse
Thanks! My name still refers to APK Pure, please remove the link or give me proper credits. Except that, you're all good! Great tutorial you published here.
Chris_Kardas said:
Thanks! My name still refers to APK Pure, please remove the link or give me proper credits. Except that, you're all good! Great tutorial you published here.
Click to expand...
Click to collapse
updated to your personal page) thanks for good feedback
0x7E1 said:
updated to your personal page) thanks for good feedback
Click to expand...
Click to collapse
my personal site works of course, thank you for your understanding and the quick reaction! Cheers. :highfive:
hey bro what clock did you use because yours seems very cool
driton.talinoci said:
hey bro what clock did you use because yours seems very cool
Click to expand...
Click to collapse
Hi!) I'm using Seven Time
Install it and choose > Seven < in clock Styles. Also you can try to resize the clock as you want and pick the color.
< see my settings in attachments >
0x7E1 said:
Hi!) I'm using Seven Time
Install it and choose > Seven < in clock Styles. Also you can try to resize the clock as you want and pick the color.
< see my settings in attachments >
Click to expand...
Click to collapse
thanks dude keep updating the post when new features are out ok, you're the best
Nice .. Thanks a lot
Installed p ify module then magisk manager safety net are go-to fail
Hello sir , when I install p ify xsposed module in my device then magisk manager safety net are go-to fail. So how to pass the magisk manager safety net and use p ify xsposed module in my device .. please tell me any solution and reply fast
Devendra Baviskar said:
Hello sir , when I install p ify xsposed module in my device then magisk manager safety net are go-to fail. So how to pass the magisk manager safety net and use p ify xsposed module in my device .. please tell me any solution and reply fast
Click to expand...
Click to collapse
Hi! You better to install firstly all libraries (it's Magisk Manager, Xposed Framework) and after all install all of modules/themes.