Guys I need urgent Help
Recently I was running AOSP based ROM and tried to flash RR ROM based on Android 5.1.1.
I was not being flashed and was giving error so I dont remember which bootloader or file I flashed to make RR Rom flashing possible.
Then I flashed Gapps and wiped Cache and Delvik and restarted the cell.
After Restart, it was stuck on bootloop. One thing not to forget, It remains stuck on bootloop for several times and finally boots up, and the first screen comes is Android upgrade that works on 96 apps. As soon as upgrade completes, it reboots and remains stuck on bootloop.
If i try to enter into recovery, it takes me to fastboot mode where blackscreen with like commands stating fastboot is displayed.
If i press the volume button up and plug in the cable while connected to Laptop, Download mode starts but Laptop doesn't detect any device.
On the other hand, if started in fastboot mode, ADB device is detected.
I have tried to install LG Drivers, Verizon Drivers and also universal ADB drivers but nothing has worked so far.
The device is not detected at all.
I have windows 10, also tried on windows 8.1 but same issue.
Even tried disabling Driver Signature enforce or updating system but still same issue.
Anyone who could be able to help will highly be appreciated.
Hi All
After updating to the new Oxygen os 3.x update my phone got stuck in the boot logo and occurring boot loop. I am not able to access the recovery but I am able to access fastboot. I tried the methods specified in different threads to restore the recovery. But it's not working. I followed this thread https://forums.oneplus.net/threads/updated-29-03-2016-mega-unbrick-guide-for-a-hard-bricked-oneplus-2.347607/ . When I am connecting my device to windows (8.1) its installing the driver automatically and which is not a qualcomm driver. Can anyone help on this?
Fixed the issue, to get the qualcomm driver we have to hold the volume up for 10 sec then connect the device to pc
I just installed the Android 6.0.1/OxygenOS 3.0 Beta. Now after the Update was released I tried to boot into Recovery Mode to set my device back to Stock Rom to be able to update to OxygenOS without using the beta. I was not able to boot into Recovery Mode! As I tried to fix it with fastboot my Windows 10 pc's device manager told me I am using a Marshall London device. I Uninstalled the drivers, used usbdeview, used baconroot, used a Windows 8.1 pc, and so on. I also tried Setting it back on Factory Settings but nothing happend. It was stuck again at the OP2 Bootscreen. Please help me I am desperate! :crying:
That is not problem just follow the link https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
Hello everyone,
I recently bought a Zuk z1 and I tried to install TWRP recovery with the TWRP manager.But when i tried Access the recovery mode my phone stuck on a dark screen..I turned it off by pressing the power off button.After that my phone boot without any problem, but now when I'm trying access the recovery mode my phone will reboot in normal mode...Any thoughts???
Sorry for any grammar mistake...btw i'm greek
Backup your data and try flashing via all in one tool kit. Worked for me.
Is there anything i can do without pc???
Thank you all for your "help", I'll figure it out myself
please make use of adb commands using pc itself .
it is the safest method of flashing recovery and unlocking boot loader.
and one information ,In ZUK Z1 to go to recovery from power off mode is by pressing both volume up and down + power button for 10 odd seconds
I did try to use a pc and the tool all in one ( http://forum.xda-developers.com/zuk-z1/orig-development/tool-toolzukz1eng0-0-3-mauronofrio-t3332563 ) but my pc doesn't seem too recognize my phone when i boot it at the bootloader, I installed the drivers from the tool all in one ( the lenovo usb drivers) but still nothing. Im using win7 starter 32 bit.
Hi all,
what happens until here?
A week ago i have bricked my Axon 7 (2017G). Complete dead, only red LED flashing. Search the Forum and found the instructions to disassemble the phone, shorten the Service Point and set the device into edl mode. Great, Works. Flashing the full EDL Rom via MiFlash and phone boots into Android. But then i was realizing that i have flashed the wrong linked Rom. ZTE_A2017V2.0.0B13. At this time i was not Aware that i Need 2017G Rom. Phone works, but wrong Rom.
When i tried to flash anew rom i get from miflash the message 'cannot receive hello packet. try to reset...'
I'm using Win10, several USB Ports and several MiFlash versions. When i Press Power + Vol Down i get into FTM Mode. When i press Power + Vol Up i come into 'Revoery Mode?'. Ist in Chinese.
Message from Fastboot:
'Your device Software cant be checked for corruption. Please lock the bootloader'.
What can id do, any Idea?
Regards
nukem007 said:
Hi all,
what happens until here?
A week ago i have bricked my Axon 7 (2017G). Complete dead, only red LED flashing. Search the Forum and found the instructions to disassemble the phone, shorten the Service Point and set the device into edl mode. Great, Works. Flashing the full EDL Rom via MiFlash and phone boots into Android. But then i was realizing that i have flashed the wrong linked Rom. ZTE_A2017V2.0.0B13. At this time i was not Aware that i Need 2017G Rom. Phone works, but wrong Rom.
When i tried to flash anew rom i get from miflash the message 'cannot receive hello packet. try to reset...'
I'm using Win10, several USB Ports and several MiFlash versions. When i Press Power + Vol Down i get into FTM Mode. When i press Power + Vol Up i come into 'Revoery Mode?'. Ist in Chinese.
Message from Fastboot:
'Your device Software cant be checked for corruption. Please lock the bootloader'.
What can id do, any Idea?
Regards
Click to expand...
Click to collapse
disassemble again, force EDL and flash the corresponding rom
bornlivedie said:
disassemble again, force EDL and flash the corresponding rom
Click to expand...
Click to collapse
Already done, same Story. I've disassemble again and tryed like the first time. But MiFlash says no hello package. Laptop was meanwhile rebooted to ensure that no Background processes are blocking MiFlash.
I can also force EDL Mode by 'adb reboot edl'. The Axon is then shown as 'Qualcomm HS-USB QD Loader 9008)' in the device manager. Or is there a difference?
nukem007 said:
Already done, same Story. I've disassemble again and tryed like the first time. But MiFlash says no hello package. Laptop was meanwhile rebooted to ensure that no Background processes are blocking MiFlash
Click to expand...
Click to collapse
In Windows 10, does the device manager detect the phone as Qualcomm 9008 inside the ports section? It is the way Windows detects a phone in EDL mode. You may have also some driver issue in Windows. If it is detected as BULK then you only need to install the latest Qualcomm drivers. You can find the details in this guide.
nukem007 said:
Already done, same Story. I've disassemble again and tryed like the first time. But MiFlash says no hello package. Laptop was meanwhile rebooted to ensure that no Background processes are blocking MiFlash.
I can also force EDL Mode by 'adb reboot edl'. The Axon is then shown as 'Qualcomm HS-USB QD Loader 9008)' in the device manager. Or is there a difference?
Click to expand...
Click to collapse
I had the no hello package message in Win10 with a A2017U, for me the solution was to setup to run MiFlash in Administrator mode (look for the check box under the compatibility tab), and then replugin the USB cable and restart EDL fresh.
There seem to be all kinds of cases of this occurring for various phones on the internet with various solutions, but this one worked for me this time.
It seems to be a YMMV thing.
BTW if you have an unlocked bootloader flashing the Recovery with the suitable version of Nfound's TWRP Exclusive allows a choice of rebooting into EDL(9800).
This makes getting back into EDL relatively convenient.
nukem007 said:
Hi all,
what happens until here?
A week ago i have bricked my Axon 7 (2017G). Complete dead, only red LED flashing. Search the Forum and found the instructions to disassemble the phone, shorten the Service Point and set the device into edl mode. Great, Works. Flashing the full EDL Rom via MiFlash and phone boots into Android. But then i was realizing that i have flashed the wrong linked Rom. ZTE_A2017V2.0.0B13. At this time i was not Aware that i Need 2017G Rom. Phone works, but wrong Rom.
When i tried to flash anew rom i get from miflash the message 'cannot receive hello packet. try to reset...'
I'm using Win10, several USB Ports and several MiFlash versions. When i Press Power + Vol Down i get into FTM Mode. When i press Power + Vol Up i come into 'Revoery Mode?'. Ist in Chinese.
Message from Fastboot:
'Your device Software cant be checked for corruption. Please lock the bootloader'.
What can id do, any Idea?
Regards
Click to expand...
Click to collapse
I have now used the Axon7Toolkit with Option 11 (Restore to stock) and after this flashed the 2017G with MiFlash. And it works. Don't know why.
But the Topic with the Bootloader is still open. So I'm not able to root and istall TWRP:
Message from Fastboot:
'Your device Software cant be checked for corruption. Please lock the bootloader'.
nukem007 said:
Already done, same Story. I've disassemble again and tryed like the first time. But MiFlash says no hello package. Laptop was meanwhile rebooted to ensure that no Background processes are blocking MiFlash.
I can also force EDL Mode by 'adb reboot edl'. The Axon is then shown as 'Qualcomm HS-USB QD Loader 9008)' in the device manager. Or is there a difference?
Click to expand...
Click to collapse
that's a bad connection, you must have let go of the contact too son
make sure it gets detected in your pc, hold it a couple of seconds more and then let go
Use the ADB command "adb reboot edl" instead as its the most sure fire way to ensure you are actually in EDL mode. The button combination method sometimes doesn't work as I've experienced this myself on more than one occasion.
I have the same issue. I cant flash using MiFlash. My phone stuck on black screen and no LED flash. This is what i tried to do:
1: I unlocked bootloader using MiFlash and fastboot.
2: Installed TWRP recovery.
3: Tried to install custom ROM and it installed but phone was not booting to system and it always went to fastboot mod.
4: Then i again lock the boatloader using fastboot oem lock.
5: Just after that the phone went to black screen and no LED and adb devices dont show phone listed and fastboot not working.
6: Tried Vol up and power for a minute but no LED and no logo just black screen. Tried Vol down and power plus vol up/down and power for a minute but nothing.
7: If i connect phone with PC its appearing in Device Manager as Qualcom HS-USB QDLoader 9008 (COM10)
8: adb and fastboot dont detect it. MiFlash detets but not flashing and gives No hello packet received error.
Anybody can help? Should i try flashing stock rom using MyFlash if it works for some reason? Other files are not flashing like recovery or unlock etc.
> 4: Then i again lock the boatloader using fastboot oem lock.
This is the fatal step that bricked your phone in EDL mode. Reason: To relock bootloader, your phone must be full stock first:
stock ROM, stock recovery. But you was with TWRP = custom recovery!
Fortunately, the Axon 7 is "unbrickable". And your phone is still in EDL mode, this is not the worst brick status (DFU mode).
Note: if ever your were in DFU mode, there is still DFU tool to unbrick your phone (search appropriate topic in forum).
To unbrick in EDL mode, try to EDL flash entire stock ROM corresponding to your model (A2017, A217U or A2017G), Nougat recommanded (not Oreo: not supported by many tools; not Marshmallow: too old).
Recommended tool to flash:
Axon 7 EDL tool (it has link to full stock ROM for different models)
https://forum.xda-developers.com/axon-7/development/axon-7-edl-tool-flash-backup-restore-t3750759
Note: I never get "No hello packet received error" when using Axon 7 EDL tool. Miflash is not necessary nor recommended for me (overkill, various versions).
Some advices:
- always launch Windows Device manager and monitor it to check phone connection status (COM HD-USB QDLoader 9008, or DFU, or Android device).
- try using latest stable Qualcomm HD-USB QDLoader Driver, if possible signed version. E.g. version 2.1.1.2.
- of course charge the phone fully if possible before flashing.
- check and use good USB connection cable.
- you may need to set Windows in "test mode" first (disable driver signing) to avoid "No hello packet received error"
https://answers.microsoft.com/en-us...est-mode/27b555ca-852a-44c7-b42f-c84b8eec06f2
I have a really similar issue. After updating to Oreo ROM B03, I tried to enter EDL to flash twrp (but I didn't get to this).
I couldn't boot to bootloader using the recovery options (the system was just normally starting). I tried with vol+, vol- and power at one time. After the red led blinks I released all buttons. I guess I got to EDL, but I can't quit it now.
The QDLoader 9008 (driver version is exactly 2.1.1.2) is visible COM4, but I can't do nothing with it. Same error with Miflash, Axon 7 EDL tool stopped on "Loading the programmer". I tried all combinations vol+, vol-, power to boot to the system again, but without luck. Black screen and no reaction.
After night, when I hold power the red led blinks and that's all. When I connect cable to laptop the red led starts blinking, no QDLoader 9008 visible now.
Anyone has an idea what to can I do?
I have the same issue. I cant flash using MiFlash. My phone stuck on black screen and no LED flash. This is what i tried to do:
1: I unlocked bootloader using MiFlash and fastboot.
2: Installed TWRP recovery.
3: Tried to install custom ROM and it installed but phone was not booting to system and it always went to fastboot mod.
4: Then i again lock the boatloader using fastboot oem lock.
5: Just after that the phone went to black screen and no LED and adb devices dont show phone listed and fastboot not working.
6: Tried Vol up and power for a minute but no LED and no logo just black screen. Tried Vol down and power plus vol up/down and power for a minute but nothing.
7: If i connect phone with PC its appearing in Device Manager as Qualcom HS-USB QDLoader 9008 (COM10)
8: adb and fastboot dont detect it. MiFlash detets but not flashing and gives No hello packet received error.
Anybody can help? Should i try flashing stock rom using MyFlash if it works for some reason? Other files are not flashing like recovery or unlock etc.
Click to expand...
Click to collapse
Hi,
same issue here. Using the Axon7_EDL_Tool doesn't work for me: While flashing A2017G_B03_OREO_FULL_EDL via "Flash FULL EDL" it stops with the output: Loading the programmer: prog_ufs_firehose_8996_ddr.elf
Does someone know the solution?
same thing happening today, anyone found the solution yet?