Guys I need urgent Help
Recently I was running AOSP based ROM and tried to flash RR ROM based on Android 5.1.1.
I was not being flashed and was giving error so I dont remember which bootloader or file I flashed to make RR Rom flashing possible.
Then I flashed Gapps and wiped Cache and Delvik and restarted the cell.
After Restart, it was stuck on bootloop. One thing not to forget, It remains stuck on bootloop for several times and finally boots up, and the first screen comes is Android upgrade that works on 96 apps. As soon as upgrade completes, it reboots and remains stuck on bootloop.
If i try to enter into recovery, it takes me to fastboot mode where blackscreen with like commands stating fastboot is displayed.
If i press the volume button up and plug in the cable while connected to Laptop, Download mode starts but Laptop doesn't detect any device.
On the other hand, if started in fastboot mode, ADB device is detected.
I have tried to install LG Drivers, Verizon Drivers and also universal ADB drivers but nothing has worked so far.
The device is not detected at all.
I have windows 10, also tried on windows 8.1 but same issue.
Even tried disabling Driver Signature enforce or updating system but still same issue.
Anyone who could be able to help will highly be appreciated.
Related
Hi, I just bought an LG G2 D802 20B Model a couple days ago, yesterday I wanted to downgrade to 4.2.2 and I ended up bricking the phone.
The phone is non rooted, doesn't have any custom recovery, and not recognized by adb even though i installed all the drivers ( koush drivers, PdaNet, Lg drivers ...)
At first I flashed with .kdz file and it ended in bootloop, I tried to factory reset but it doesnt have any effects with the stock recovery it only shows the green android bot and blue progress bar and then restart in 3 seconds and reboots to lg logo and start looping.. After a restart the download mode didn't work anymore it showed me fastboot error, I searched for the tutorial that actually worked and I flashed with .tot method but there is still bootloop and the download mode is stuck at the image attached. The phone is not recognized by neither windows or ubuntu therefore I can't use adb to fix the partitions.
Can any body provide me with a solution? The phone is still new and it will be a shame if its transformed to a brick in 3 days :crying:
Hey..hmm i think thats how download mode it is...so did you tried to flash again a firmware?
raulx222 said:
Hey..hmm i think thats how download mode it is...so did you tried to flash again a firmware?
Click to expand...
Click to collapse
Actually the picture attached is stuck and it doesnt change , and the pc can't recognize the phone so I cant flash it with another firmware
BUMP! please help!!
This isn't download mode.
here
only aboot, boot, laf..
bender_007 said:
This isn't download mode.
here
only aboot, boot, laf..
Click to expand...
Click to collapse
Thanks for your reply, however the phone is not recognized on windows neither on ubuntu therefore this tutorial can't help ...
I am in the exact same situation.
Mine is a D802 32GB Hong Kong model. I stupidly ran AutoRec which soft-bricked my phone. Managed to get Download Mode working, then flashed 20C and 20B which bootlooped. Then I attempted to flash 10B, which got me into this exact state:
Download Mode not working (only shows "Download Mode", does not go to firmware recovery screen, not detected in Win/Linux)
Factory reset (Power + Vol Down) can go to factory reset screen, after factory reset, still bootloop.
Once in a while, I also get the Android icon which then disappears after a few seconds and goes to LG logo again.
If I plug the phone in and do a factory reset, Windows detects the LGE AndroidNet modem, and Linux will detect cdc_acm USB Abstract Control Model driver. Flash Tool and LG Mobile Support seems to detect the phone and attempt to flash, but the phone restarts after a short while.
I have no idea what else to do
Hi, I made a really big mess. After perusing through the threads, I read that you had to be on bootstack 39a to flash lollipop. I was on 24a, 4.4.2. I booted to recovery and backed up my system then flashed bootstack 39a and wiped cache. Sadly I am now getting secure booting error cause boot certification verify.
Update: I was able to get to recovery and was able to flash my backup file. However, while flashing the backup the screen suddenly died. I left it alone for a few minutes, now however it is unresponsive and wont event light up when plugged for charging. Help.. Thank you in advance.
Update: My device is not being recognized by adb. And the device manager is indicating the there are no drivers for the lg g2 vs980. Its marked with the yellow exclamation point. I think usb debugging got disabled when I flashed boot stack 39a. I've been trying to no avail to have it recognized constantly reinstalling lg drivers...
how about download mode ?
I just installed the Android 6.0.1/OxygenOS 3.0 Beta. Now after the Update was released I tried to boot into Recovery Mode to set my device back to Stock Rom to be able to update to OxygenOS without using the beta. I was not able to boot into Recovery Mode! As I tried to fix it with fastboot my Windows 10 pc's device manager told me I am using a Marshall London device. I Uninstalled the drivers, used usbdeview, used baconroot, used a Windows 8.1 pc, and so on. I also tried Setting it back on Factory Settings but nothing happend. It was stuck again at the OP2 Bootscreen. Please help me I am desperate! :crying:
That is not problem just follow the link https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
My phone is a6000 plus variant and was running on CM 12.1 update 19 prior to getting bricked. I have flashed the same ROM before, however, this time I ended up flashing it twice-the second flash without clearing cache, data and the like and on top of the same ROM.
The problem is that the phone is not booting into recovery (just showing the lenovo logo).
It is however booting into fast boot mode. (Hold power key for reboot).
Now, I would just use adb to flash the phone but with cyanogenmod 12.1 with no update, the device is not showing in adb. (The USB worked fine before this, however I had USB connected during flashing and noticed that CM 12.1 with no update would not be detected on my PC.)
The phone is alive and well just not being detected in adb. Every time I connect the device to my PC via USB, the drivers install but fail.
I tried updating the drivers with device manager but error 10 is showing.
If I remove the battery the phone shuts down, until I power it up again, which results in the lenovo android logo on the screen.
What are my options in such a case?
Timeline of events:
I boot my phone into twrp with adb and flash CM 12.1 no update.
I see that the PC adb is not working and drivers fail to install.
I boot the phone into recovery using advanced recovery and notice that in twrp recovery the adb devices detect my phone.
I flash a queue of CM 12.1, update 20 and super user zip.
I recall that I had forgotten to clear data, cache and the like and end up dirty flashing.
I reboot the phone thinking it will fix it but the device just boots up the android and lenovo logo.
Furthermore, the device is not being detected in adb and drivers fail to install.
AsCi1 said:
I boot my phone into twrp with adb and flash CM 12.1 no update.
I see that the PC adb is not working and drivers fail to install.
I boot the phone into recovery using advanced recovery and notice that in twrp recovery the adb devices detect my phone.
I flash a queue of CM 12.1, update 20 and super user zip.
I recall that I had forgotten to clear data, cache and the like and end up dirty flashing.
I reboot the phone thinking it will fix it but the device just boots up the android and lenovo logo.
Furthermore, the device is not being detected in adb and drivers fail to install.
Click to expand...
Click to collapse
First of all remove your sd card and use a sd card reader or put it in another phone.
Then on the other phone/PC download a stock CM12 or 13 ROM and Gapps.
Save the ROM on the sd card.
Put the sd card on your phone and go to recovery
Wipe everything except SD CARD and then flast the ROM and GApps
Hi guys
SO Ive tried a number of things.
Im currently stock in recovery or fastboot.
It happened after I applied a substratum theme on 8.1 Resurrection Remix and I restarted the phone because it froze on applying the theme.
No mater what I do I always end up in recovery.
Things tried so far:
Everything besides ext. Sd wiped numerous times before and after reinstall.
Full restore including everything (bootloader, recovery, cache, all the restore options you can use in TWRP aka the full monty. based on Fulmics 4.2 ive used to restore beforehand)
Full reinstall of Resurrection Remix
Full reinstall of Fulmics
Reinstall of TWRP
Reinstall of MElina TWRP
Each and every reinstall and restore takes me promptly to TWRP just after the LG logo..
My question is, how do I fix this?
I have full access to both fastboot and recovery
Lgup and uppercut clean flash
Thanks do you know how I get Windows 10 to detect it as a LG handset not just ADB or Bootloader interface? LG USB drivers are installed.
It does recognize it as portable device. (probably MTP mode as I have full access to)
Edit 2: I discovered as soon as I plug in USB on the PC the phone boots up and into TWRP even if I've turned it off prior to that
So I thought locking the bootlooker was a good idea.. Apprently not as I now can't get past "Your device is corrupt" screen.
I can almost boot into bootloader until the last confirmation "delete userdata screen" after where it goes back to "your device is corrept" screen..
Can get into iMEI display screen - Never seen that one before
Power off your phone and when the screen turns black press and hold vol up and plug in your usb cable. Your pc must find your G6. Then download a stock rom and flash it with lgup and uppercut.
MozezzFG said:
Power off your phone and when the screen turns black press and hold vol up and plug in your usb cable. Your pc must find your G6. Then download a stock rom and flash it with lgup and uppercut.
Click to expand...
Click to collapse
You're a godsent!!