All ROM's here are X01BD and my phone shows model as X01BDA I wanna know about difference that i should be aware of
Work find
navtey said:
All ROM's here are X01BD and my phone shows model as X01BDA I wanna know about difference that i should be aware of
Click to expand...
Click to collapse
Different product model based on region & ram. I'm on X01BDA.. It should work
P/s: the thread are in wrong section
X01BDA is basically Indonesian model, it have no NFC as far as I know.
It's wrong section anyway.
X10MINISTER said:
Different product model based on region & ram. I'm on X01BDA.. It should work
P/s: the thread are in wrong section
Click to expand...
Click to collapse
Were there any special steps you had to take for installing recovery? Both TWRP and PBRP are not working for me.
EDIT: I fixed it, but I am a long-time lurker on XDA, so I have no idea ho to remove a post. So let's try to make this useful instead.
If anyone else encounters the same problem, it might be because once the stock ROM boots it replaces the flashed recovery with the stock recovery again.
So if booting into the recovery through fastboot doesn't work, reboot normally and immediately press power + volume down without giving it a chance to boot into the stock rom.
The last part is where I personally got stuck, not knowing that the stock rom would replace the recovery.
I have X01BDA, and official TWRP v3.3.1-0 of X01BD is released on 2nd June, I just wanted to know can I use official TWRP of X01BD on X01BDA?
nice_guy75 said:
I have X01BDA, and official TWRP v3.3.1-0 of X01BD is released on 2nd June, I just wanted to know can I use official TWRP of X01BD on X01BDA?
Click to expand...
Click to collapse
can
Related
Hi. I am new user of LG. I bought a Korean version of LG G2. Friend of mine flashed international version (as per his saying) of KK. Phone is rooted as well. Now phone's software/hardware specs are as follows: Android ver 4.4.2, Kernel 3.4.0 Build No. KOT40I.D80220b, software vers. Lightning v2.0. In hardware info section it is Model No. LG-F320L. It is now confusing for me either my phone is D802 or F320L.
I want to flash recovery in order to flash custom rom. Please guide me what my phone is now, D802 or F320L? Which phone version recovery is safe I should flash? Thanks for any help.
javedabbasi said:
Hi. I am new user of LG. I bought a Korean version of LG G2. Friend of mine flashed international version (as per his saying) of KK. Phone is rooted as well. Now phone's software/hardware specs are as follows: Android ver 4.4.2, Kernel 3.4.0 Build No. KOT40I.D80220b, software vers. Lightning v2.0. In hardware info section it is Model No. LG-F320L. It is now confusing for me either my phone is D802 or F320L.
I want to flash recovery in order to flash custom rom. Please guide me what my phone is now, D802 or F320L? Which phone version recovery is safe I should flash? Thanks for any help.
Click to expand...
Click to collapse
try typing 3845#*802# in dialer.. does it work ? If yes - it will answer your question
bender_007 said:
try typing 3845#*802# in dialer.. does it work ? If yes - it will answer your question
Click to expand...
Click to collapse
No. It does not work.
It's definitely a F320L then You can take back cover off, right? And there's place for a MicroSD? If yes, then it's a F320L
vPro97 said:
It's definitely a F320L then You can take back cover off, right? And there's place for a MicroSD? If yes, then it's a F320L
Click to expand...
Click to collapse
My friend, I know it is originally Korean Version (F320L) and I am using MicroSD as well but firmware flashed on this is not the original one. The software version is Lightning v2.0. Before this on original software(firmware) there were many Korean softwares and after flashing current firmware (which someone else flashed for me) there is no Korean thingy on phone and it is all English and rooted as well.The build no is also changed. My question is I still need recoveries prepared for F320L or recovery matching to build no. KOT49L.D80220b? Because all recoveries are for different variants and I don't know which is for my phone. Bottom line is I need a working recovery on my phone so I can try different custom roms.
javedabbasi said:
My friend, I know it is originally Korean Version (F320L) and I am using MicroSD as well but firmware flashed on this is not the original one. The software version is Lightning v2.0. Before this on original software(firmware) there were many Korean softwares and after flashing current firmware (which someone else flashed for me) there is no Korean thingy on phone and it is all English and rooted as well.The build no is also changed. My question is I still need recoveries prepared for F320L or recovery matching to build no. KOT49L.D80220b? Because all recoveries are for different variants and I don't know which is for my phone. Bottom line is I need a working recovery on my phone so I can try different custom roms.
Click to expand...
Click to collapse
You should most definitely flash a custom recovery for F320L then
There are many D802 Roms built on Korean firmwares but that doesn't make the core things of the phone Korean, and that's what you should look for when flashing.
Your ROM is just built around a D802 Firmware but everything is modified so it matches your F320L. I hope this helps!
vPro97 said:
You should most definitely flash a custom recovery for F320L then
There are many D802 Roms built on Korean firmwares but that doesn't make the core things of the phone Korean, and that's what you should look for when flashing.
Your ROM is just built around a D802 Firmware but everything is modified so it matches your F320L. I hope this helps!
Click to expand...
Click to collapse
Finally, someone understood my problem. Thanks for your answer. OK, Now if I flash F320L recovery and somehow it goes wrong than what will happen. Because I do not have any backup of current rom
javedabbasi said:
Finally, someone understood my problem. Thanks for your answer. OK, Now if I flash F320L recovery and somehow it goes wrong than what will happen. Because I do not have any backup of current rom
Click to expand...
Click to collapse
Honestly, since you're running a custom ROM already, I think you have a custom recovery installed for how would you otherwise have a custom rom :laugh:?
Please try turning your phone off, and try factory resetting your phone using the button combination - that should take you to the custom recovery
Be careful about the build.prop entries.
If there is wrong build info (d802 instead of some other let's say..) and you unroot, and you have no recovery and want to use download mode, the lg tool detects it's d802 and you can't flash your proper kdz..
It's most likely because of your current rom. If the rom cook provided variants in aroma then he didn't provide seperate build.prop's (or entries)..
vPro97 said:
Honestly, since you're running a custom ROM already, I think you have a custom recovery installed for how would you otherwise have a custom rom :laugh:?
Please try turning your phone off, and try factory resetting your phone using the button combination - that should take you to the custom recovery
Click to expand...
Click to collapse
Exactly same thought come to my mind and I tried to enter in recovery mode and found a full page in Korean language which is for sure is not recovery I used always.
Hello.
Right now, I can flash CWM recovery and CM12.1 Rom to my sm-n9006.
But, I want to flash aryamod and it requires either twrp or philz touch. But when I flash them, in my screen I see Samsung Note 3 SM-N9006 and
at the left up, I see
RECOVERY BOOTING. . . . .
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
and it sticks like that. Then, I have to power+ volume(down) to close the phone.
How can I flash philz or twrp??
Should I update bootloader or modem? And how?
My bootloader version: N9006ZCUDML1
My baseband version : N9006ZCUDML1
MaaYuu said:
Hello.
Right now, I can flash CWM recovery and CM12.1 Rom to my sm-n9006.
But, I want to flash aryamod and it requires either twrp or philz touch. But when I flash them, in my screen I see Samsung Note 3 SM-N9006 and
at the left up, I see
RECOVERY BOOTING. . . . .
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
and it sticks like that. Then, I have to power+ volume(down) to close the phone.
How can I flash philz or twrp??
Should I update bootloader or modem? And how?
My bootloader version: N9006ZCUDML1
My baseband version : N9006ZCUDML1
Click to expand...
Click to collapse
Your os is seriously outdated (4.3 JellyBean).
Update it to the latest available stock firmware then flash TWRP v2.8.7
Read the twrp's original thread for more infos.
zlazaar said:
Your os is seriously outdated (4.3 JellyBean).
Update it to the latest available stock firmware then flash TWRP v2.8.7
Read the twrp's original thread for more infos.
Click to expand...
Click to collapse
Many thanks, it's worked. :good:
MaaYuu said:
Many thanks, it's worked. :good:
Click to expand...
Click to collapse
Please I use n9006 (china/wcdma) too I want to flash philz touch like you. I'm on android 5.0 can you help? Please give the link where you found philz touch for our n9006 .thank
First page of SEARCH its not hard to find .
https://forum.xda-developers.com/search/forum/2496?query=Philz
st version can be found here:
Quote:
Galaxy Note 3 LTE International
Now: one common recovery for all: hlte
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
The below specific variants are no more updated, use hlte common variant
- hltexx
For older bootloader, use versions before 6.13.0
That fails stick with stock rom .
JJEgan said:
First page of SEARCH its not hard to find .
https://forum.xda-developers.com/search/forum/2496?query=Philz
st version can be found here:
Quote:
Galaxy Note 3 LTE International
Now: one common recovery for all: hlte
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
The below specific variants are no more updated, use hlte common variant
- hltexx
For older bootloader, use versions before 6.13.0
That fails stick with stock rom .
Click to expand...
Click to collapse
Thank you bro but The links in the screenshot is no longer working
Page 77 of that thread.
JJEgan said:
Page 77 of that thread.
Click to expand...
Click to collapse
This is the link that I found on page 77 of that thread can you confirm me that it is good for me ?
No as I don't have N9006.
Suggest you read the thread/post one.
JJEgan said:
No as I don't have N9006.
Suggest you read the thread/post one.
Click to expand...
Click to collapse
I read the thread but I don't found anything concerning n9006 .really I don't know what to do but I saw that on this link https://forum.xda-developers.com/ga...ecovery-twrp-materialized-dark-light-t3153843
Can you read and tell me what do you think about this costume recovery I see that it supported this screen resolution (1080 *1920) like my n9006
Thank
I have N9006 and never used Philz Recovery. Tried once, but didn't worked. As stated just 6 post before (but ppl don't read): "Update to the latest available stock firmware then flash TWRP v2.8.7". So, with Kies or whatever Samsung is using or calling it these days, update your stock firmware to the latest one that they'll serve. Or you can grab the latest stock firmware from SamMobile (to download you'll need an account) and flash it with Odin. Then, with the same Odin, flash TWRP v2.8.7. read more about Odin and flashing. It's not rocket surgery, but it's also very easy to brick your phone. I would atach the Odin and TWRP that I'm using to flash aroma installer roms, but I'm not sure I'm allowed to do that
Neguranegura said:
I have N9006 and never used Philz Recovery. Tried once, but didn't worked. As stated just 6 post before (but ppl don't read): "Update to the latest available stock firmware then flash TWRP v2.8.7". So, with Kies or whatever Samsung is using or calling it these days, update your stock firmware to the latest one that they'll serve. Or you can grab the latest stock firmware from SamMobile (to download you'll need an account) and flash it with Odin. Then, with the same Odin, flash TWRP v2.8.7. read more about Odin and flashing. It's not rocket surgery, but it's also very easy to brick your phone. I would atach the Odin and TWRP that I'm using to flash aroma installer roms, but I'm not sure I'm allowed to do that
Click to expand...
Click to collapse
Yes you can I need it please.
https://twrp.me/samsung/samsunggalaxynote3qualcomm.html
JJEgan said:
https://twrp.me/samsung/samsunggalaxynote3qualcomm.html
Click to expand...
Click to collapse
Bro There is twrp 3.2.1 for n9006 no twrp 2.8.7.0 for n9006 on twrp. me so I continue my research
I believe the sm-n9006 is a China version of the Note 3. Your link is for the sm-n9005 which has a different bootloader.
You should only flash a recovery that is made for the sm-n9006.
audit13 said:
I believe the sm-n9006 is a China version of the Note 3. Your link is for the sm-n9005 which has a different bootloader.
You should only flash a recovery that is made for the sm-n9006.
Click to expand...
Click to collapse
Poster has been told to use N9005 by Eleo in one of his 50 +multiple identical questions .
If you know of the correct recovery could you link for the poster please .
Quote:
Originally Posted by Eleo
It was already answered to you:
https://forum.xda-developers.com/gal...2/post76812620
Try twrp 2.8.7.0 for note3 N9005. Even if something goes wrong, you can flash twrp 3.2.1 for N9006 to correct it.
End Quote .
###
My suggestion would be to find a Chinese forum for N9006.As after 50+ posts you are in the same position as post one .
@JJEgan, I don't know for sure which recovery can be flashed since I don't have this particular phone. Also, Philz and CWM have not been updated for ages so I personally would not use either one.
I looked for twrp for the n9006, didn't find it, and would personally stop trying to flashing anything until I knew for sure that a recovery for another phone would work 100% on the n9006. I did some cursory searches and found no official recovery for the n9006.
Likewise .
Rom thread has a few who say they flashed on N9006.
Also that model is often faked MTK.
TWRP 2.8.3 is listed seperate for 9006 on twrp.me. devices Note 3
https://twrp.me/samsung/samsunggalaxynote3qualcomm.html
Thank
Hello,
I have a N9005 that I'm tryin to install a custom ROM (I have another one already with Norma v29 working perfectly). In this one I flashed the original 5.0 firware and then tried to root, isntall custom recover, custom rom, etc., as I normally do. With this phone I can root and install custom recovery but every custom ROM i tried I always have a bootloop on Galaxy Note 3 screen (tried Norma, Phonesis, etc.).
I can reflash to an original ROM but don't understand why it doesn't work with a custom ROM.
Can any one help me? I even tried to change bootloader on a specfific tutorial for Norma v29.
Thank you in advance!
Boot to download mode and check the model first .
Is this a used phone ??
Hello. Yes is a used phone. The model is a SM-9005. The roms I'm using are for this model. I tried again a Lolipop 5.0 stock rom, then root, then recovery (until here everything works). Then applied Norma V29 and i'm stuck again at the Galaxy Note 3 screen, the blue led starts to blink and then the phone restarts. Really can't understand. Even tried the same memory card from my Note. Well the only difference is that one is 16GB and this one is 32GB. Any stock rom work perfectly but didn't want to use them.
Can it be that the internal memory size is causing the issue? is the only difference....can someone help?
Well my original phone is a 32GB. Don't know why the hell I was thinking 16GB... so most weired. If someone could help will be great. It's working with the stock 5.0 and rooted with CM-AUTO.
before flashing custom firmware you should enter the recovey and make complete format for both cache and data partitions.
after the firmware install it might take the system up to 10 minutes to boot.
Thank you for the answer. i'm doing all the steps (I changed roms on Note 3 for some time now). This one startups on the Galaxy Note 3 Screen, the led starts to blink (like 4-5 times) and restarts himself. So is not waiting time. made factory resets, all the wipes, even a script I found for fixing EFS. When I flash a Android 4.4 or 5.0 stock from SamMobile just works.
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
adel alsayed said:
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
Click to expand...
Click to collapse
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Dan0v said:
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Click to expand...
Click to collapse
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
adel alsayed said:
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
Click to expand...
Click to collapse
Suggests you are using the wrong TWRP version .
Read the roms instructions/ search thread .
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
golalmo said:
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
Click to expand...
Click to collapse
i use it already but given faild my phone is n90005 32 gb I don't know what can I do for install ux 9.7 rom
Does any other rom install ??
JJEgan said:
Does any other rom install ??
Click to expand...
Click to collapse
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
adel alsayed said:
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
Click to expand...
Click to collapse
then check the md5 of magma nx9.7..!
read the how to install in tge magma rom.. sometimes something small will interrupt the flashing
fabio.teles said:
Hello,
I have a N9005...
Click to expand...
Click to collapse
I thought I'd clean up the phone.
I installed via ODIN official fw = Lollipop.
Then root + TWRP 3.1.1.
Next installing custom rom RR 7.1.
ERROR
I resolved as follows:
Installing "CP_N9005XXUGBPB1_MODEM.tar" + "BL_N9005XXUGBPB2_BOOTLOADER.tar"
Now RR installation is successful!
But "not SIM" (can not enter PIN)
Solution:
Override file "libsec-ril.so". Here is: Root / System / lib / libsec-ril.so
Done - it works!
Files here: https://ulozto.cz/!M6PZA7EKQHNe/xda-zip
It helped me. Will it help you too?
*******
Thanks @"Anon_Help_You" !!!
(https://forum.xda-developers.com/galaxy-note-3/help/solution-lineage-os-sim-t3640689)
Can anyone please help me on my Moto G5 plus 4gb 32gb Indian variant. XT1686
I was on Resurction Remix rom and now back to stock POTTER_RETAIL_7.0_NPNS25.137-35-5_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
But now everytime I flash TWRP, its flashes with signing status failure and boots up back to twrp only (not to rom).
Can anyone please let me know the exact stock firmware link for Indian variant as I want to go back to stock rom.
Also, I have flash the logo from bootloader but phone still shows the bad key logo.
Thanks in advance
jitensetia said:
Can anyone please help me on my Moto G5 plus 4gb 32gb Indian variant. XT1686
I was on Resurction Remix rom and now back to stock POTTER_RETAIL_7.0_NPNS25.137-35-5_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
But now everytime I flash TWRP, its flashes with signing status failure and boots up back to twrp only (not to rom).
Can anyone please let me know the exact stock firmware link for Indian variant as I want to go back to stock rom.
Also, I have flash the logo from bootloader but phone still shows the bad key logo.
Thanks in advance
Click to expand...
Click to collapse
How are you flashing back to stock? You should no longer have TWRP on your phone if you are doing it properly, the stock ROM must be flashed with fastboot and will over-write TWRP.
Anything more than that I can't answer unless you give us more details of what was done...
jitensetia said:
Can anyone please help me on my Moto G5 plus 4gb 32gb Indian variant. XT1686
I was on Resurction Remix rom and now back to stock POTTER_RETAIL_7.0_NPNS25.137-35-5_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
But now everytime I flash TWRP, its flashes with signing status failure and boots up back to twrp only (not to rom).
Can anyone please let me know the exact stock firmware link for Indian variant as I want to go back to stock rom.
Also, I have flash the logo from bootloader but phone still shows the bad key logo.
Thanks in advance
Click to expand...
Click to collapse
Same problem bro. But i tried many video and now I hardbricked my phone. It only shows fastboot mode. I cannot able to go into recovery even after flashing it. Whenever I flash rom and reboot, it shows that bad key or 5 sec window and that window keeps appearing again and again.. I don't know the exact problem. I think I flashed the wrong rom. Can anyone please give me the link of exact rom. My phone's model no is XT1686 indian variant
love7731 said:
Same problem bro. But i tried many video and now I hardbricked my phone. It only shows fastboot mode. I cannot able to go into recovery even after flashing it. Whenever I flash rom and reboot, it shows that bad key or 5 sec window and that window keeps appearing again and again.. I don't know the exact problem. I think I flashed the wrong rom. Can anyone please give me the link of exact rom. My phone's model no is XT1686 indian variant
Click to expand...
Click to collapse
Hi,
you can flash this stock rom with fastboot commands:- it will work definetely
POTTER_RETAIL_7.0_NPNS25.137-35-5_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
Mine is working with this ROM
jitensetia said:
Hi,
you can flash this stock rom with fastboot commands:- it will work definetely
POTTER_RETAIL_7.0_NPNS25.137-35-5_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
Mine is working with this ROM
Click to expand...
Click to collapse
Bro, i flash it with fastboot commands only. Is this the real rom? Are u sure? My model no is XT1686 Indian version. I think i tried almost 3 Roms but none of them is for my phone. Please help me bro. I m really thankful to u
love7731 said:
Same problem bro. But i tried many video and now I hardbricked my phone. It only shows fastboot mode. I cannot able to go into recovery even after flashing it. Whenever I flash rom and reboot, it shows that bad key or 5 sec window and that window keeps appearing again and again.. I don't know the exact problem. I think I flashed the wrong rom. Can anyone please give me the link of exact rom. My phone's model no is XT1686 indian variant
Click to expand...
Click to collapse
love7731 said:
Bro, i flash it with fastboot commands only. Is this the real rom? Are u sure? My model no is XT1686 Indian version. I think i tried almost 3 Roms but none of them is for my phone. Please help me bro. I m really thankful to u
Click to expand...
Click to collapse
yes, as soon as you like to be on Stock firmware... this is stock rom for your phone to work with...
you can PM me in case you have any questions... but as far as I know, you cannot flash to any other custom ROM after you flash the mentioned stock ROM....
I got this ROM link from somewhere on google and I'm currently on this stock rom in INDIA, Delhi....
jitensetia said:
yes, as soon as you like to be on Stock firmware... this is stock rom for your phone to work with...
you can PM me in case you have any questions... but as far as I know, you cannot flash to any other custom ROM after you flash the mentioned stock ROM....
I got this ROM link from somewhere on google and I'm currently on this stock rom in INDIA, Delhi....
Click to expand...
Click to collapse
Bro my bootloader is corrupted... I don't know what to do now. That's why i am not abke to flash this rom. Please help me. I am in Ghaziabad
love7731 said:
Bro my bootloader is corrupted... I don't know what to do now. That's why i am not abke to flash this rom. Please help me. I am in Ghaziabad
Click to expand...
Click to collapse
Can you post your bootloader screenshot by which you mean it is corrupt... bad key does not mean the bootloader is corrupt.
Bad key notification is normal, not an error actually
Also check your personal message.
jitensetia said:
Can you post your bootloader screenshot by which you mean it is corrupt... bad key does not mean the bootloader is corrupt.
Bad key notification is normal, not an error actually
Also check your personal message.
Click to expand...
Click to collapse
Some other dev told me after seeing my commands that my bootloader is corrupted. He told me various ways but nothing works. You please message me on WhatsApp..i wanna talk to u
hello
ladies and gentlemen I hope everyone is having a good day.
I have one question and hopefully I find an answer. I bought a used Galaxy s8 SM-G950FD (8.0.0) Exynos
last night I rooted it (magisk). The issue that i am facing when I restart my phone ( after rooting my phone) I got "only official released binaries are allowed to be flashed" and the phone freezes on that screen. I solved that by flashing another ROM that I downloaded from sammobile.com.
Now my phone is working fine and I rooted it again (magisk) but what should I do I am scared to get "only official released binaries are allowed to be flashed" if I restart the phone? is there any solution for that?
( i do not want to flash a ROM every time I restart my phone lol)
I hope my question is clear ( English is not my first language).
Go-to TWRP and flash this, or any custom kernel with the RMM state fixed so it won't change on you.
hbk.777 said:
hello
ladies and gentlemen I hope everyone is having a good day.
I have one question and hopefully I find an answer. I bought a used Galaxy s8 SM-G950FD (8.0.0) Exynos
last night I rooted it (magisk). The issue that i am facing when I restart my phone ( after rooting my phone) I got "only official released binaries are allowed to be flashed" and the phone freezes on that screen. I solved that by flashing another ROM that I downloaded from sammobile.com.
Now my phone is working fine and I rooted it again (magisk) but what should I do I am scared to get "only official released binaries are allowed to be flashed" if I restart the phone? is there any solution for that?
( i do not want to flash a ROM every time I restart my phone lol)
I hope my question is clear ( English is not my first language).
Click to expand...
Click to collapse
kratosjohn said:
Go-to TWRP and flash this, or any custom kernel with the RMM state fixed so it won't change on you.
Click to expand...
Click to collapse
thank you so much
kratosjohn said:
Go-to TWRP and flash this, or any custom kernel with the RMM state fixed so it won't change on you.
Click to expand...
Click to collapse
how to go to TWRP when my phone is stuck in boot loop and shows Only official released binaries are allowed to be flashed?
Thanks a lot.