Database Users

Solution for soft-bricked N9005 after flashing Hong Kong's TGY firmware

I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.

doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
Thanks buddy for helping me, got me up and running again :good:

You're welcome, mate!

Softbrick
Thank you thank you thank you thank you .
I always liked Hong Kong roms on note one and two and I thought I can continue the tradition .
Softbricked it , and no solution anywhere . I installed this and voila . Back in business . I also installed MJ7 on top now all is good .
Have I said thank you ?
Well thank you !

budalica said:
Thank you thank you thank you thank you .
Have I said thank you ?
Well thank you !
Click to expand...
Click to collapse
You're welcome. Did you press the "Thank you" button?

Thanks a lot. Without your post, my phone will still be bricked.

hh
That day! ! Me too

Useful info, I'm sure this will be of use in many situations.
Thankyou.
Sent from my GT-I9100 using Tapatalk 4

uscool said:
Thanks buddy for helping me, got me up and running again :good:
Click to expand...
Click to collapse
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.

lalahamid said:
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.
Click to expand...
Click to collapse
Here is the newer version from UK BTU: N9005XXUDMJ7_N9005OXADMJ4_BTU.zip
http://terafile.co/29f621508415

doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
my brick story in short is------ brought note 3 sm-n9005 from ebay from a Hong Kong based seller. pics of ap, cp and csc are attached. rooted with chainfire's and installed cwm6 by chenglu. A few days back, flashed bobcat rom version 2(mj7) and later 3( mk2 ) without problems. Was looking for different themes .yesterday flashed balckchrome from s4 forum that also went smooth. Unfortunatly flashed another theme for s4 which was not meant for andriod version 4.3. Pretty stupid .went into bootloop. Had nandroid backup tried to restore but couldn't.
Flashed another rom mk2 from cwm. again bootloop .took the odin route and flashed stock deodesk mj7 by Djembey from this thread.
http://forum.xda-developers.com/show....php?t=2461929
Failed again. Then downloaded latest mk2 from sammobile website. The same error (invalid ext4 img) in short failed on all ccounts. Have run out of options. The last thing in mind is to wait for some new bootloader after mk2 which might rescue me as mentioned in this thread that new bootloaders might help... Any guidance will be appreciated. Thanks

@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went

doclucas said:
@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went
Click to expand...
Click to collapse
Why did you suggest X-Note but not another ROM?

3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.

doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always
replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.

doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Nope, I didnt mean what is the best rom to use.
The problem is that how to bypass the bootloop issue.

pyarajaani said:
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.
Click to expand...
Click to collapse
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?

doclucas said:
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?
Click to expand...
Click to collapse
yes...I did that n installed X note rom from cwm. BUT I suspect that cwm is not fully functional. Why I m saying this is that I have a nandroid backup of bobcat mj7 rom...which cwm isn't able to detect even. ..nevertheless. .cwm is installed.

1) Which CWM version do you have installed?
2) Did you do a full wipe/factory-reset?
3) Did you try also advanced formatting (of system partition together with the full wipe) and then install the ROM?
4) Did you try all the above with the latest TWRP recovery instead of CWM?
http://forum.xda-developers.com/showthread.php?t=2467255

Try to flash this file by cwm first and then flash any rom after you want
https://www.dropbox.com/s/bibytggk2m8npw8/Brick_Loop_FIX_Fix.zip
Sent from my SM-N9005 using Tapatalk

TRLTE Note 4 - What Custom Roms Are Available?

TRLTE Note 4 Custom Roms
Hi Guys,
I just recently got Note 4 and got it rooted to start flashing cutom Roms but my phone is trlte
and so far i did not find any rom for my phone.
Can i some how change it to accept trltexx roms or do i need to sell it and get trltexx?
Thank you

tommyk999 said:
Hi Guys,
I just recently got Note 4 and got it rooted to start flashing cutom Roms but my phone is trlte
and so far i did not find any rom for my phone.
Can i some how change it to accept trltexx roms or do i need to sell it and get trltexx?
Thank you
Click to expand...
Click to collapse
Go into settings<about device and check for model number, it should be SM-N910C, that is the International Exynos version. If model number is SM-N910F, then it is the International Snapdragon version. Once you've confirmed your model goto their respective development threads and look for any ROM that has your model number attached in the topic title.

Hi,
It is N-910F i did checked that and tried download roms for this version from Zedomax website but when i tried to flash it in TWRP it says that rom is trltexx and my phone got trlte
and thats point where everything stops. Am i still dowloading wrong roms? or?
Thank you

tommyk999 said:
Hi,
It is N-910F i did checked that and tried download roms for this version from Zedomax website but when i tried to flash it in TWRP it says that rom is trltexx and my phone got trlte
and thats point where everything stops. Am i still dowloading wrong roms? or?
Thank you
Click to expand...
Click to collapse
Why are you downloading ROMs from Zedomax's website when there is a development section for snapdragon based note 4's right here? Download from the aforementioned thread and ask Questions there, where it will be easier to find a solution to your problem

Probably you have the wrong version of TWRP. Just flash via odin the right recovery..
If your Note4 is the N910F download "twrp-2.8.7.0-trltexx.img.tar" from this page, launch odin, put the downloaded .img.tar file in the AP/PDA button, reboot your phone in download mode, connect it to the pc via usb cable, let it be recognized from odin, click start and let it flash the recovery.
Now you'll be able to flash the right ROMs for your N910F.

Thank you guys it was wrong version of TWRP after flashing from your link i was able flash RR straight away THX

Thank you! I had the same problem, my mistake for not coming to the right place first.

N910g unresponsive after flashing Dr.Ketan ROM I N5 Port seandroid error

Hello,
I tried flashing my n910g with "Dr.Ketan ROM I N5 Port I Full Theme store support I S6 Edge features L12" ROM.
After flashing, I also flashed the bootloader and modem mentioned by Dr.Ketan. The phone is stuck at the bootscreen with an error seandroid.
RECOVERY BOOTING Recovery is NOT SEANDROID ENFORCING Set Warrenty Bit. I used cwm recovery before flashing my ROM and my phone was already rooted with cf autoroot before flashing this rom.
I wanted to try this rom in my phone and I'm a noob. Can somebody please help me with this ? It'd be a great favor.
I'm a noob, please help me with the appropriate files/instructions so that I can start using my phone. As of now, my phone is still stuck at the boot screen with that error.

Download Stock firmware from sammobile for your phone and flash it with ODIN.

dork997 said:
Download Stock firmware from sammobile for your phone and flash it with ODIN.
Click to expand...
Click to collapse
Does it mean I would not be able to use the N5 port rom?

I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.

Funny Sykes said:
I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.
Click to expand...
Click to collapse
i have no idea about note 5 port as i have never used it.

dork997 said:
i have no idea about note 5 port as i have never used it.
Click to expand...
Click to collapse
Alright, now that my n910g is stuck with that I tried installing some nameless rom and the screen doesn't really work. I need to use Spen always even to click on the dial button.
Can you suggest any good rom for Note 4 N910g?
I really need to give my phone a fresh start as this will be my first time to flash my phone.
Please help!!

Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.

Shane_Picardo said:
Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.
Click to expand...
Click to collapse
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.

Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
downloaded the mentioned stock rom and then tried flashing the dr.ketan rom.
It always kept saying android media stopped working and when i click ok, again the same pop up and nothing works.
No icons are displayed but the edge+ feature was showing.
What is the best way to have this rom ?

Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
Did you try my method? Did it work?

Used coh4 baseband which you said. But could not find the proper root file. Please help with the root and cwm files for 910g which work. Then i will try flashing dr.ketan rom

Yes I tried, now I am using the same baseband you have mentioned which is Australian, now the touch doesn't work well but with s pen it works fine. What to do ?>

Shane_Picardo said:
Did you try my method? Did it work?
Click to expand...
Click to collapse
"Shane_Picard"
Downloaded the stock from from sammobile and my phone was able to boot successfully. But the problem is that ever since, I tried flashing twrp recovery to flash dr.ketan rom which did not work. My phone's touch is really not working well. I have enabled touches in developer options and confirm that my s-pen works fine but when I touch the phone, it gets detected 1 cm below where I actually touch. This problem might have been created when I flashed twrp recovery because that was the first time I saw this issue.
Please help how to fix this ?

Need N900W8 Bootloader & Modem & ROOT?

Hi, I have a N900W8 (Canada) and I am in Lollipop. I am looking for the Marshmallow bootloader & modem for N900W8.
Also, im looking to root my phone other than the cf auto root method. Because after flashing the cf-autoroot for n900w8, my buttons stopped working.
Thank you.

There is no marshmallow bootloader or modem.
You can flash SuperSU from twrp.

What bootloader/modem can I use for a marshmallow rom?

Just use the latest LP bootloader and modem.

audit13 said:
Just use the latest LP bootloader and modem.
Click to expand...
Click to collapse
I thought it should be a marshmallow bl/cp for a marshmallow rom. Didnt know i can use a lollipop.
And for the supersu, i just need to flash twrp then flash supersu from chainfire website?
Thank you.

There is no MM bootloader and modem because Samsung never released a MM build for the Note 3.
Yes, just flash twrp and Chainfire's supersu.

@audit13 do you know how to get the modem and bootloader from a stock firmware (tar.md5) ?

Not sure if you can extract it from a stock rom but it may be easier to just flash the entire rom in Odin.

audit13 said:
Not sure if you can extract it from a stock rom but it may be easier to just flash the entire rom in Odin.
Click to expand...
Click to collapse
Okay, I'll do that. Also, do you know what custom kernel is compatible with stock rom N900W8VLU2DPG1 ?

AFAIK, there is no custom kernel that is compatible with the stock Samsung ROM because the Samsung Note 3 apps require a Samsung kernel.

Hi.
Hi, sorry to make it alive. I have a Canadian Samsung Note 3 with (bell mobility) carrier. And, I'm searching to root my phone for removing bloatware and pushing the power out. But and completely newb, and no idea where to start. I have try towelroot and Kings with no success.

https://forum.xda-developers.com/galaxy-note-3/general/samsung-galaxy-note-3-sticky-roll-t3237249
Suggest rooting with .
SR1-SuperSU-v2.78-SR1-20160915123031 .Its a zip file use Philz recovery or TWRP to flash .

audit13 said:
AFAIK, there is no custom kernel that is compatible with the stock Samsung ROM because the Samsung Note 3 apps require a Samsung kernel.
Click to expand...
Click to collapse
There is a custom kernel for stock note3 lolipop firmware which is called lean kernel, idel kernel, ater97 kernel and shinto kernel.... Do ur research before saying thinks u don't knw about ok bro.

@jgun007, I said "AFAIK", I never said there wasn't a kernel for the Canadian note 3 sm-n900w8 which is the model referred to in the subject line of this thread and discussed in this thread.
I see that lean kernel is for the n900t (T-mobile note 3) which is not the same model as the Canadian note 3: https://forum.xda-developers.com/showthread.php?t=2488233
I see idel kernel here but I don't see the Canadian note 3 model listed as being compatible: https://forum.xda-developers.com/ga...nt/kernel-idlekernel-leankernel-fork-t3241582
I see arter kernel here for the n9005 which is not the same model # as the Canadian note 3: https://forum.xda-developers.com/galaxy-note-3/development/arter97-kernel-galaxy-note-3-t3028148
I see the thread for the shinto kernel was closed and the last post was in January 2015, about 2 years ago and I didn't see any mention of compatibility with the n900w8: https://forum.xda-developers.com/galaxy-note-3/help/shinto-kernel-t2895089

Hi.
Anybody know why, I'm searching with my phone information... I found nothing.
Model number sm-n9000w8
Version 5.0
Band n900w8vlu2dpg1
Number version lrx21v.n900w8vlu2dpg1

What do you want to know about your phone? The model # is sm-n900w8. I noticed you had three zeros in your post.
Looks like your phone is running the latest stock ROM according to sammobile.com: https://www.sammobile.com/firmwares/database/SM-N900W8/

audit13 said:
What do you want to know about your phone? The model # is sm-n900w8. I noticed you had three zeros in your post.
Looks like your phone is running the latest stock ROM according to sammobile.com:
Click to expand...
Click to collapse
Yes, is a stock device. Never rooted. And it's a mess for the 0 in over.
I have all my information but when I'm searching for rooting... I found nothing and no procedure for someone who have a cellular like mine. N900W8VLU2DPG1.

What's wrong with using TWRP recovery ??

JJEgan said:
What's wrong with using TWRP recovery ??
Click to expand...
Click to collapse
Probably nothing, I don't know what is twrp.

You can root using cfautoroot and Odin.

N9005 doesn't work with custom roms?

Hello,
I have a N9005 that I'm tryin to install a custom ROM (I have another one already with Norma v29 working perfectly). In this one I flashed the original 5.0 firware and then tried to root, isntall custom recover, custom rom, etc., as I normally do. With this phone I can root and install custom recovery but every custom ROM i tried I always have a bootloop on Galaxy Note 3 screen (tried Norma, Phonesis, etc.).
I can reflash to an original ROM but don't understand why it doesn't work with a custom ROM.
Can any one help me? I even tried to change bootloader on a specfific tutorial for Norma v29.
Thank you in advance!

Boot to download mode and check the model first .
Is this a used phone ??

Hello. Yes is a used phone. The model is a SM-9005. The roms I'm using are for this model. I tried again a Lolipop 5.0 stock rom, then root, then recovery (until here everything works). Then applied Norma V29 and i'm stuck again at the Galaxy Note 3 screen, the blue led starts to blink and then the phone restarts. Really can't understand. Even tried the same memory card from my Note. Well the only difference is that one is 16GB and this one is 32GB. Any stock rom work perfectly but didn't want to use them.

Can it be that the internal memory size is causing the issue? is the only difference....can someone help?

Well my original phone is a 32GB. Don't know why the hell I was thinking 16GB... so most weired. If someone could help will be great. It's working with the stock 5.0 and rooted with CM-AUTO.

before flashing custom firmware you should enter the recovey and make complete format for both cache and data partitions.
after the firmware install it might take the system up to 10 minutes to boot.

Thank you for the answer. i'm doing all the steps (I changed roms on Note 3 for some time now). This one startups on the Galaxy Note 3 Screen, the led starts to blink (like 4-5 times) and restarts himself. So is not waiting time. made factory resets, all the wipes, even a script I found for fixing EFS. When I flash a Android 4.4 or 5.0 stock from SamMobile just works.

hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS

adel alsayed said:
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
Click to expand...
Click to collapse
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also

Dan0v said:
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Click to expand...
Click to collapse
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp

adel alsayed said:
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
Click to expand...
Click to collapse
Suggests you are using the wrong TWRP version .
Read the roms instructions/ search thread .

use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x

golalmo said:
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
Click to expand...
Click to collapse
i use it already but given faild my phone is n90005 32 gb I don't know what can I do for install ux 9.7 rom

Does any other rom install ??

JJEgan said:
Does any other rom install ??
Click to expand...
Click to collapse
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM

adel alsayed said:
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
Click to expand...
Click to collapse
then check the md5 of magma nx9.7..!
read the how to install in tge magma rom.. sometimes something small will interrupt the flashing

fabio.teles said:
Hello,
I have a N9005...
Click to expand...
Click to collapse
I thought I'd clean up the phone.
I installed via ODIN official fw = Lollipop.
Then root + TWRP 3.1.1.
Next installing custom rom RR 7.1.
ERROR
I resolved as follows:
Installing "CP_N9005XXUGBPB1_MODEM.tar" + "BL_N9005XXUGBPB2_BOOTLOADER.tar"
Now RR installation is successful!
But "not SIM" (can not enter PIN)
Solution:
Override file "libsec-ril.so". Here is: Root / System / lib / libsec-ril.so
Done - it works!
Files here: https://ulozto.cz/!M6PZA7EKQHNe/xda-zip
It helped me. Will it help you too?
*******
Thanks @"Anon_Help_You" !!!
(https://forum.xda-developers.com/galaxy-note-3/help/solution-lineage-os-sim-t3640689)