Hey everyone.
I recently got a TMO 6T and tried to convert it to the international ROM, but ran into some problems. The device would not show up in the Device Manager, even after installing the OP and Qualcomm drivers multiple times. I watched several videos just in case, and restarted both the phone and computer. The phone shows up normally for file transfer, but won't appear when in Fastboot Mode.
Thank you
FastAssassin101 said:
Hey everyone.
I recently got a TMO 6T for my birthday and tried to convert it to the international ROM, but ran into some problems. The device would not show up in the Device Manager, even after installing the OP and Qualcomm drivers multiple times. I watched several videos just in case, and restarted both the phone and computer. The phone shows up normally for file transfer, but won't appear when in Fastboot Mode.
Thank you
Click to expand...
Click to collapse
Have you tried this tool: https://forum.xda-developers.com/oneplus-6t/how-to/t-mobile-6t-to-international-t3888307/page109
Caltinpla said:
Have you tried this tool: https://forum.xda-developers.com/oneplus-6t/how-to/t-mobile-6t-to-international-t3888307/page109
Click to expand...
Click to collapse
That is what I am trying to do but the MSM tool won't recognize the phone is plugged in.
FastAssassin101 said:
That is what I am trying to do but the MSM tool won't recognize the phone is plugged in.
Click to expand...
Click to collapse
Turn off the phone, press and hold both volumes down then connect to your computer using the stock USB cable. You might need to turn your computer volume up so you can hear when they're connected then run the .exe app.
Caltinpla said:
Turn off the phone, press and hold both volumes down then connect to your computer using the stock USB cable. You might need to turn your computer volume up so you can hear when they're connected then run the .exe app.
Click to expand...
Click to collapse
I've done this exact procedure several times, and hear the sound of a device connecting, but it won't show in MSM. I tried our desktop instead of my laptop, and the phone appeared in Device Manager for a little bit, but then disappeared again.
I'll try once more when I get home tonight, thanks!
FastAssassin101 said:
That is what I am trying to do but the MSM tool won't recognize the phone is plugged in.
Click to expand...
Click to collapse
the one thing you can't do is expect your phone screen to be on when you're doing the conversion.all you have to do is hold the volume up and down button at the same time plug it in and when you hear it connect on the computer run the MSMdownload tool. Your phone screen will be black. You shouldn't be in fastboot mode
Flash1959 said:
the one thing you can't do is expect your phone screen to be on when you're doing the conversion.all you have to do is hold the volume up and down button at the same time plug it in and when you hear it connect on the computer run the MSMdownload tool. Your phone screen will be black. You shouldn't be in fastboot mode
Click to expand...
Click to collapse
Oh wow, this worked! Thanks so much. For some reason I thought it had to be in Fastboot https://cdn-cf-3.xda-developers.com/images/smilies/victory.gif
FastAssassin101 said:
Oh wow, this worked! Thanks so much. For some reason I thought it had to be in Fastboot https://cdn-cf-3.xda-developers.com/images/smilies/victory.gif
Click to expand...
Click to collapse
I thought the same thing too.? we don't learn anything if we don't make mistakes ???
Related
So, I've bricked my ATT G2, It will NOT go into anything but fastboot mode, and it will not turn off. When i attempt to turn it off it just reboots itself into fastboot. My computer will not recognize the device, either. Am I completely fu****?
jcmaddox1 said:
So, I've bricked my ATT G2, It will NOT go into anything but fastboot mode, and it will not turn off. When i attempt to turn it off it just reboots itself into fastboot. My computer will not recognize the device, either. Am I completely fu****?
Click to expand...
Click to collapse
http://androidforums.com/international-lg-g2-all-things-root/789119-stuck-fastboot.html
Google is your friend
sottey said:
http://androidforums.com/international-lg-g2-all-things-root/789119-stuck-fastboot.html
Google is your friend
Click to expand...
Click to collapse
Problem is it doesn't recognize fastboot commands.
Drivers are installed.
Sent from my Nexus 4 using Tapatalk
jcmaddox1 said:
So, I've bricked my ATT G2, It will NOT go into anything but fastboot mode, and it will not turn off. When i attempt to turn it off it just reboots itself into fastboot. My computer will not recognize the device, either. Am I completely fu****?
Click to expand...
Click to collapse
If you play around holding power button and vol button eventually you will be able to turn off the phone.. Lol I kno this because ithapoened to me.. Just keep playing with it until the phone goes off.. Then be careful and get it in download mode
jcmaddox1 said:
Problem is it doesn't recognize fastboot commands.
Drivers are installed.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
If the power button thing doesnt do it, and you aren't under warranty, you could pull the case and disconnect the battery.
Have you ever been able to connect with adb?
Also, maybe try different USB ports and computers.
HTH
sottey said:
If the power button thing doesnt do it, and you aren't under warranty, you could pull the case and disconnect the battery.
Have you ever been able to connect with adb?
Also, maybe try different USB ports and computers.
HTH
Click to expand...
Click to collapse
Fixed - Different computer worked. For some reason my Windows machine just didn't want to see it as a fastboot device, However my old macbook came in and saved the day, now i can put it safely back on it's shelf to never be used unless i brick the phone again. Woot.
When trying to download an OTA for my LG-D800, I flashed TWRP but then flashed Stock Recovery, but when I tried to update it, it powered down then stayed on the LG boot up screen, and stays there, there is no white text in the corner, no download mode, and of course no recovery. Also now my laptop can't see my phone. Please help me. Thank you!
bryantx24 said:
When trying to download an OTA for my LG-D800, I flashed TWRP but then flashed Stock Recovery, but when I tried to update it, it powered down then stayed on the LG boot up screen, and stays there, there is no white text in the corner, no download mode, and of course no recovery. Also now my laptop can't see my phone. Please help me. Thank you!
Click to expand...
Click to collapse
This thread should Help you
http://forum.xda-developers.com/showthread.php?t=2582142
with this procedure i revived my G2 after nearly he same problem
Skolotaie said:
This thread should Help you
http://forum.xda-developers.com/showthread.php?t=2582142
with this procedure i revived my G2 after nearly he same problem
Click to expand...
Click to collapse
I tried this already, but my computer does not show the phone at all.
bryantx24 said:
I tried this already, but my computer does not show the phone at all.
Click to expand...
Click to collapse
Do you tried different Usb Ports ?
If you have the Chance you should try it on a other Pc
+ I had to Use my Usb 2.0 Ports the Usb 3 ports never wanted to Recognize the phone
Its a Tricky Process and took me also a while but hey its worth it right
Skolotaie said:
Do you tried different Usb Ports ?
If you have the Chance you should try it on a other Pc
+ I had to Use my Usb 2.0 Ports the Usb 3 ports never wanted to Recognize the phone
Its a Tricky Process and took me also a while but hey its worth it right
Click to expand...
Click to collapse
I tried and I don't have another computer
bryantx24 said:
I tried and I don't have another computer
Click to expand...
Click to collapse
Aw Damn :c
Wish i could Help more but lets wait
I bet somone here can help you dont give up the Hope
Maybe the only thing wich keeps the Phone from beeing recognized is a Driver Problem
Skolotaie said:
Aw Damn :c
Wish i could Help more but lets wait
I bet somone here can help you dont give up the Hope
Maybe the only thing wich keeps the Phone from beeing recognized is a Driver Problem
Click to expand...
Click to collapse
I wonder why it won't show up at all? I am going to reinstall the drivers.
bryantx24 said:
I wonder why it won't show up at all? I am going to reinstall the drivers.
Click to expand...
Click to collapse
UPDATE:Nothing has worked yet.
I literally had to try 2-3 usb CORDS to get my cpu to see my lg g2
Danokan said:
I literally had to try 2-3 usb CORDS to get my cpu to see my lg g2
Click to expand...
Click to collapse
I used a couple none of the worked.
I was able to connect the device to the phone, but no ADB and its called: Unknown USB Device (Device Descriptor Failed), but it does not show up in Ubuntu.
bryantx24 said:
I was able to connect the device to the phone, but no ADB and its called: Unknown USB Device (Device Descriptor Failed), but it does not show up in Ubuntu.
Click to expand...
Click to collapse
I could never get my cpu to recognize my phone while in recovery.
I used two different computers and couldn't get anything.
When the ROM is working.. I can.
Are you positive you can't get it into download mode?
Try this.
Power off phone completely.
Attach usb cord WHILE holding the VOL up button.
See if that gets it into download mode.
If you can... then you can do the KDZ or TOT "unbrick back to stock" method.
I tried both of those.. but none worked for me.
This one worked for me though:
http://forum.xda-developers.com/showthread.php?t=2448960
Danokan said:
I could never get my cpu to recognize my phone while in recovery.
I used two different computers and couldn't get anything.
When the ROM is working.. I can.
Are you positive you can't get it into download mode?
Try this.
Power off phone completely.
Attach usb cord WHILE holding the VOL up button.
See if that gets it into download mode.
If you can... then you can do the KDZ or TOT "unbrick back to stock" method.
I tried both of those.. but none worked for me.
This one worked for me though:
http://forum.xda-developers.com/showthread.php?t=2448960
Click to expand...
Click to collapse
No, I can't get into download mode, I have no recovery and I have an ATT LG G2
Hey guys im trying to back to a fresh stock rom. (VS980)I downloaded all the necessary files, drivers, lgflash tools etc etc. however my computer still cannot recognize my phone. under ports there is not an ANDROID port for my phone. (since we need to change it to COM41)
any ideas or suggestions?
daimonmustdie said:
Hey guys im trying to back to a fresh stock rom. (VS980)I downloaded all the necessary files, drivers, lgflash tools etc etc. however my computer still cannot recognize my phone. under ports there is not an ANDROID port for my phone. (since we need to change it to COM41)
any ideas or suggestions?
Click to expand...
Click to collapse
what comp/ operating system are you on?
plug directly into the computer, not a hub.
Gabriel51 said:
what comp/ operating system are you on?
plug directly into the computer, not a hub.
Click to expand...
Click to collapse
its a pc, wins7 64 bit
daimonmustdie said:
its a pc, wins7 64 bit
Click to expand...
Click to collapse
Do you find it in the device manager?
Gabriel51 said:
Do you find it in the device manager?
Click to expand...
Click to collapse
it shows up when its showing the LG logo, but when its on download mode, its blank.
daimonmustdie said:
it shows up when its showing the LG logo, but when its on download mode, its blank.
Click to expand...
Click to collapse
When it's in the download mode it may show up in a different location in the device manager and be listed only as "android".
Do you hear any sound from the computer when you plug it in when in download mode?
What does your download screen look like?
Once these questions are answered, there may be a solution. Hopefully a CDMA device won't be different
Gabriel51 said:
When it's in the download mode it may show up in a different location in the device manager and be listed only as "android".
Do you hear any sound from the computer when you plug it in when in download mode?
What does your download screen look like?
Once these questions are answered, there may be a solution. Hopefully a CDMA device won't be different
Click to expand...
Click to collapse
Hi i just got my phone back from a cell phone repair shop, they had no luck either.
to answers your questions:
i hear no sound from the computer when i plug it in to turn on download mode.
my download screen says Firmware Update on top, "do not unplug the USB connecton...." 0%. in the bottom it says b17 and ROOTED in red.
daimonmustdie said:
Hi i just got my phone back from a cell phone repair shop, they had no luck either.
to answers your questions:
i hear no sound from the computer when i plug it in to turn on download mode.
my download screen says Firmware Update on top, "do not unplug the USB connecton...." 0%. in the bottom it says b17 and ROOTED in red.
Click to expand...
Click to collapse
there are two possibilities.. First, your phone is already hard bricked.. second is, your battery is absolutely dead with no power left...
Well, Have you tried to check the battery itself?
Rei Zazie said:
there are two possibilities.. First, your phone is already hard bricked.. second is, your battery is absolutely dead with no power left...
Well, Have you tried to check the battery itself?
Click to expand...
Click to collapse
hmmmm hardbricked? i can get into download mode and stock recovery. I messed around with adb sideload last night trying to flash a custom recovery but it kept saying installation aborted on the phone. i even tried adb push but it keeps saying error:closed in the cmd prompt.
how can i check the battery? its non removeable.
thanks for helping, any ideas is appreciated!
daimonmustdie said:
hmmmm hardbricked? i can get into download mode and stock recovery. I messed around with adb sideload last night trying to flash a custom recovery but it kept saying installation aborted on the phone. i even tried adb push but it keeps saying error:closed in the cmd prompt.
how can i check the battery? its non removeable.
thanks for helping, any ideas is appreciated!
Click to expand...
Click to collapse
ok, so have you tried it using different PC or laptop?
(last option if nothing else to try) if you want to check the battery :
DIY remove the case ( there are several tutorials in youtube, but of course, do it with your own risk)
daimonmustdie said:
Hi i just got my phone back from a cell phone repair shop, they had no luck either.
to answers your questions:
i hear no sound from the computer when i plug it in to turn on download mode.
my download screen says Firmware Update on top, "do not unplug the USB connecton...." 0%. in the bottom it says b17 and ROOTED in red.
Click to expand...
Click to collapse
It's not hard bricked/
Getting into download mode proves this.
You must get your computer to recognize your device in order to communicate with it. So I would not consider anything else until that is accomplished. PERIOD!
1. Are you using a USB 2.0 port? usb 3.0 will not work a lot of the time. (Important)
2. Have you tried another usb cable?
3. I think we discussed the drivers, I have them if needed
What operating system are you using?
If nothing here helps we can we can use "TeamViewer 9" which will give me control of your computer to help resolve this issue...
Gabriel51 said:
It's not hard bricked/
Getting into download mode proves this.
You must get your computer to recognize your device in order to communicate with it. So I would not consider anything else until that is accomplished. PERIOD!
1. Are you using a USB 2.0 port? usb 3.0 will not work a lot of the time. (Important)
2. Have you tried another usb cable?
3. I think we discussed the drivers, I have them if needed
What operating system are you using?
If nothing here helps we can we can use "TeamViewer 9" which will give me control of your computer to help resolve this issue...
Click to expand...
Click to collapse
when i turn on my phone, and the LG logo is on the screen, my computer recognizes the phone, it will say LGE androidnet...but when i go to download mode the computer will not recognize. its weird
1. 2.0 ports
2. ive been trying the original LG cable and a motorola cable. no success
3. as for drivers. installed as of now are the LG verizon united driver 2.14.1 and LG united mobile driver 3.12.3.0
4. win 7 64 bit
daimonmustdie said:
when i turn on my phone, and the LG logo is on the screen, my computer recognizes the phone, it will say LGE androidnet...but when i go to download mode the computer will not recognize. its weird
1. 2.0 ports
2. ive been trying the original LG cable and a motorola cable. no success
3. as for drivers. installed as of now are the LG verizon united driver 2.14.1 and LG united mobile driver 3.12.3.0
4. win 7 64 bit
Click to expand...
Click to collapse
That is weird
will it go into recovery?
Gabriel51 said:
That is weird
will it go into recovery?
Click to expand...
Click to collapse
stock recovery.
daimonmustdie said:
stock recovery.
Click to expand...
Click to collapse
Will it boot into recovery?
Gabriel51 said:
Will it boot into recovery?
Click to expand...
Click to collapse
yes it will
daimonmustdie said:
yes it will
Click to expand...
Click to collapse
can you do a factory reset from there? I sold my g2 so i can't check for myself
Gabriel51 said:
can you do a factory reset from there? I sold my g2 so i can't check for myself
Click to expand...
Click to collapse
yes i can
daimonmustdie said:
yes i can
Click to expand...
Click to collapse
what happens when you do a factory reset?
Gabriel51 said:
what happens when you do a factory reset?
Click to expand...
Click to collapse
nothing, it reboots and the LG logo appears and thats it..no O.S.
I was flashing a zip file to an SD for my raspberry pi using an app downloaded from the app store. Once I targeted the SD and hit flash, the status bar started going across the screen to show how much data has been written, and then the phone started acting really slow, froze and started playing the bootlogo for AEX-ROM. After that the screen went black. I tried plugging the phone into 3 different chargers but nothing would turn it on, not even the status light. I plugged the phone into my computer to see if I could fix it through ADB, but the phone is not showing. I get the sound from windows of the device being recognized. Does anyone know the special key combo to put the phone into EDL mode? Or the trick to get the phone to boot again?
ibphantom said:
I was flashing a zip file to an SD for my raspberry pi using an app downloaded from the app store. Once I targeted the SD and hit flash, the status bar started going across the screen to show how much data has been written, and then the phone started acting really slow, froze and started playing the bootlogo for AEX-ROM. After that the screen went black. I tried plugging the phone into 3 different chargers but nothing would turn it on, not even the status light. I plugged the phone into my computer to see if I could fix it through ADB, but the phone is not showing. I get the sound from windows of the device being recognized. Does anyone know the special key combo to put the phone into EDL mode? Or the trick to get the phone to boot again?
Click to expand...
Click to collapse
Last time i checked, edl mode was volume up and down and power button together. Then wait till light flashes three times and you're in edl mode.
Waancho said:
Last time i checked, edl mode was volume up and down and power button together. Then wait till light flashes three times and you're in edl mode.
Click to expand...
Click to collapse
I tried that, and I can hear it disconnect and reconnect again, but still can't get windows to see it in adb. Device manager shows it as Qualcomm HS-USB QDLoader 9008(COM6)
ibphantom said:
I tried that, and I can hear it disconnect and reconnect again, but still can't get windows to see it in adb. Device manager shows it as Qualcomm HS-USB QDLoader 9008(COM6)
Click to expand...
Click to collapse
If I'm not mistaken, that in fact means you're in edl mode. Edl and adb are two different modes.
Waancho said:
If I'm not mistaken, that in fact means you're in edl mode. Edl and adb are two different modes.
Click to expand...
Click to collapse
Okay, well even from there it's not showing up in XiaoMiFlash's device list
ibphantom said:
Okay, well even from there it's not showing up in XiaoMiFlash's device list
Click to expand...
Click to collapse
Did you try the edl tool AND different cables? I always test cables just to be sure.
Waancho said:
Did you try the edl tool AND different cables? I always test cables just to be sure.
Click to expand...
Click to collapse
I've tried 3 different cables. I'm stuck at the Axon7Toolkit option "#11 : RESTORE TO STOCK/RECOVER FROM HARDBRICK (EDL)"
I am able to select stock firmware, but then it tries to pass the flash off to XiaoMiFlash and that program cannot see my phone for some reason.
ibphantom said:
I've tried 3 different cables. I'm stuck at the Axon7Toolkit option "#11 : RESTORE TO STOCK/RECOVER FROM HARDBRICK (EDL)"
I am able to select stock firmware, but then it tries to pass the flash off to XiaoMiFlash and that program cannot see my phone for some reason.
Click to expand...
Click to collapse
Did you try flashing a full edl image for your phone?
Waancho said:
Did you try flashing a full edl image for your phone?
Click to expand...
Click to collapse
I've been trying to, but XiaoMiFlash tool doesn't see my device in edl
ibphantom said:
I've been trying to, but XiaoMiFlash tool doesn't see my device in edl
Click to expand...
Click to collapse
Have you tried using the EDL Tool?
ibphantom said:
I was flashing a zip file to an SD for my raspberry pi using an app downloaded from the app store. Once I targeted the SD and hit flash, the status bar started going across the screen to show how much data has been written, and then the phone started acting really slow, froze and started playing the bootlogo for AEX-ROM. After that the screen went black. I tried plugging the phone into 3 different chargers but nothing would turn it on, not even the status light. I plugged the phone into my computer to see if I could fix it through ADB, but the phone is not showing. I get the sound from windows of the device being recognized. Does anyone know the special key combo to put the phone into EDL mode? Or the trick to get the phone to boot again?
Click to expand...
Click to collapse
Stupid question, did you take the SD card out?
Hey there guys, so as the title suggests, i'm having a bootloop problem on my m30s sm-307f, i can't access recovery mode, and i'm unable to start the flashing process because i can't even install the usb driver, i've tried several drivers, using several cables, on several systems (windows 7 / windows 10 / windows 11), and i always get that infamous yellow triangle on the SAMSUNG Mobile USB CDC Composite Device in the Universal Serial Bus Controllers section in the device manager, the phone was operating normally one day, and the next day when i try to power it on, i get this, i'm absolutely certain that i did nothing to the phone, not even an update, and it most definitely didn't fall to the ground, please respond, i have really important data there, and it would devastating to lose it, and thanks a lot.
Can you access Download Mode?
UniX1803 said:
Can you access Download Mode?
Click to expand...
Click to collapse
Yes i can.
Ok. Can Odin detect your phone?
UniX1803 said:
Ok. Can Odin detect your phone?
Click to expand...
Click to collapse
No, unfortunately it can't, which is to be expected since windows itself can't detect it.
Is your USB Cable connected when you try to boot to Recovery Mode? when the screen goes black, press Vol+ & Power until Samsung Logo appears, Release Power, hold Vol+ until Recovery Mode appears.
UniX1803 said:
Is your USB Cable connected when you try to boot to Recovery Mode? when the screen goes black, press Vol+ & Power until Samsung Logo appears, Release Power, hold Vol+ until Recovery Mode appears.
Click to expand...
Click to collapse
I do know how to get to download mode, i did of course try, and although it does appear on the phone that it's working, the computer doesn't detect the latter as i explained, and as such, odin doesn't detect it as well.
I was talking about Recovery Mode.
UniX1803 said:
I was talking about Recovery Mode.
Click to expand...
Click to collapse
Sorry, i didn't notice that, i'm unable to access recovery mode either because the phone just keeps rebooting.
I had the same problem but following the mentioned steps did worked for me. It's that short moment when the screen turns black, where you have to push that buttons. USB Cable needs to be plugged in!
If this solution is not working for you, try searching the web. I found more than one potential solution. Good luck.
UniX1803 said:
I had the same problem but following the mentioned steps did worked for me. It's that short moment when the screen turns black, where you have to push that buttons. USB Cable needs to be plugged in!
If this solution is not working for you, try searching the web. I found more than one potential solution. Good luck.
Click to expand...
Click to collapse
Thanks a lot for the help, i really appreciate it, some people are saying that it's a motherboard problem, what do you think ?
Could be, but i'm not sure. I would try to find a software solution, until you are sure it's not to get fixed on this way.
UniX1803 said:
Could be, but i'm not sure. I would try to find a software solution, until you are sure it's not to get fixed on this way.
Click to expand...
Click to collapse
You're right, again, thanks a lot for your help.
Try uninstalling the device in device manager and try those before plugging it in again.
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
treety said:
Try uninstalling the device in device manager and try those before plugging it in again.
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
Click to expand...
Click to collapse
I've already tried them, they didn't work as intended unfortunately, thanks for the reply though.
Were you ever able to solve this? Is it a hardware issue? I think that may be the correct determination. I'm going to take this one apart and see if I find anything that would corroborate.
stoag said:
Were you ever able to solve this? Is it a hardware issue? I think that may be the correct determination. I'm going to take this one apart and see if I find anything that would corroborate.
Click to expand...
Click to collapse
Unfortunately, i wasn't able to, but i think it's most likely hardware related.