Hello
I was trying to restore my rom to original yesterday, Odin did not see my S7 Edge in download mode using my Windows 10 laptop and it was the same with my desktop computer. I tried again on my spare laptop which runs Windows 7 and it saw it so i tried to flash the rom and it failed when on SYSTEM. I really don't know what to do and i need this phone as it is my main phone.
All drivers were installed.
By the way the S7 Edge now shows a message saying it wants me to plug it into the computer for an emergency repair or something.
SM-G935F
Any help appreciated thanks!
Did you try another USB?
Related
I lost recovery on my phone and when I try and boot my phone, it says "system software not authorized by att."
I'm trying to ODIN my phone back to stock but I can't see my phone when I open ODIN and put my phone in download mode. does anyone know of any fixes for this?
Try different USB port or different cable.
You might have to try a different computer. I can't for the life of me get my pc to recognize my device. But I have no problem on my laptop
Sent from my Nexus 5
Thanks guys. I found out that I had to restart my computer after installing the drivers and then it detected it with no problems!
I have the samsung USB drivers installed on my windows 10 cpu and every time I plug the phone in, I get the dreaded USB not reconized notification. The drivers have been uninstalled and re-installed with no luck...tried USB debugging in developer options and no luck. Tried installing kies and smart switch but get the dreaded application failed to start...side by side configuration message appears for both.
This is a stock non rooted Telus S7 Edge that was carrier unlocked so I could switch to Tmobile here in Canada. (Way cheaper plan).
Phone works except for being not reconized.
I am wanting to root, so I can use the bluetooth internet tethering option that is not available with a stock Telus rom.
Any help would be greatly appreciated..?
Go to C\Windows\INF
Look for wpdmtp and wpdmtphw files,right-click on them and click on install.
Thanks to Microsoft for making simple things difficult..........
Thank you....worked liked a charm!!?
Oops...spoke to soon..pulling my hair out here?? I get the same message still...even tries on another windows 10 cpu with different USB cable..same results??
today i made a very stupid mistake while i tried to root my S7 edge.
I put the phone to Download mode and installed twrp-3.0.2-4-hero2lte.img through Odin FIRST,
before installing CF-Auto-Root-hero2lte-hero2ltexx-smg935f.tar
It was a really careless mistake, really stupid..
what happens now is that the twrp is not installed (cant load into the twrp recovery). and it is stucked at the samsung s7 edge screen.
the phone can still boot into Download mode, but my computer cannot detect the device anymore.
it only recognises the phone as "unknown usb device (device descriptor request failed)"
- i tried with 3 computers (all running windows 10), 3 different cables, all wont work.
- battery has been fully dead and then re-powered on
can anyone help me with this please? i will donate to your paypal if you can help me fix this problem............
Have you tried to switch the cable / usb port and use the emergency recovery on the Smart Switch software?
angourakis said:
Have you tried to switch the cable / usb port and use the emergency recovery on the Smart Switch software?
Click to expand...
Click to collapse
yeah I have tried all that and nothing works
Hello
I was trying to restore my rom to original yesterday, Odin did not see my S7 Edge in download mode using my Windows 10 laptop and it was the same with my desktop computer. I tried again on my spare laptop which runs Windows 7 and it saw it so i tried to flash the rom and it failed when on SYSTEM. I really don't know what to do and i need this phone as it is my main phone.
All drivers were installed.
By the way the S7 Edge now shows a message saying it wants me to plug it into the computer for an emergency repair or something and the laptop gets stuck on Setup connection or Initialization
SM-G935F
Any help appreciated thanks!
Try using another USB cable !!
Personally, I solved that!
Good afternoon,
I am trying to root my Galaxy s7 edge: G935F or my Galaxy tab A 2016: T580 with odin, but both aren't being recognized by my Windows 10 computer. They do charge but don't seem to recognize my computer either. However my computer does recognize my Galaxy s5 neo and my Galaxy A5 2017. I've searched a lot and tried everything i found.
Which involves:
Different computers, ports, cables; and I consistantly get te same error.
Original cable
manualy install drivers, removing all usb drivers and reboot computer.
factory reset
Enabling developer options, usb debugging and usb configuration is set to Media Transfer Protocol.
I switched off selective usb interruption in my computers power management and dissabled quick boot.
Are there other things I could try, to make the computer recognize my S7 edge or Tab 2016. The only thing I could find, is that the ports of the devices itself are broken. Since both devices behave and charge normally I doubt this really is the case.
Since my main goal is to get one of the two rooted, maybe someone knows a way to do this without the use of a usb connection. I geuss one-click root methods don't work on these devices and I wasn't able to find something trough micro sd or a wireless option.
Thank you in advance
Jobiscky said:
Good afternoon,
I am trying to root my Galaxy s7 edge: G935F or my Galaxy tab A 2016: T580 with odin, but both aren't being recognized by my Windows 10 computer. They do charge but don't seem to recognize my computer either. However my computer does recognize my Galaxy s5 neo and my Galaxy A5 2017. I've searched a lot and tried everything i found.
Which involves:
Different computers, ports, cables; and I consistantly get te same error.
Original cable
manualy install drivers, removing all usb drivers and reboot computer.
factory reset
Enabling developer options, usb debugging and usb configuration is set to Media Transfer Protocol.
I switched off selective usb interruption in my computers power management and dissabled quick boot.
Are there other things I could try, to make the computer recognize my S7 edge or Tab 2016. The only thing I could find, is that the ports of the devices itself are broken. Since both devices behave and charge normally I doubt this really is the case.
Since my main goal is to get one of the two rooted, maybe someone knows a way to do this without the use of a usb connection. I geuss one-click root methods don't work on these devices and I wasn't able to find something trough micro sd or a wireless option.
Thank you in advance
Click to expand...
Click to collapse
Hi there, installation of samsung usb drivers is easy. Please remove existing installation files on pc and install from provided link while the device connected to the pc during install and good internet. You should have no problem. I've done it on several machines
https://www.mediafire.com/file/gyp6fdl1wqbs8dz/SAMSUNG_USB_Driver.exe/file
Thanks for your response. I've already tried that several times. Just to be totaly sure i've tried it again with the link you've provided and sadly it didn't work. The thing is that the samsung a5 2017 and the samsung s5 neo, do connect. But the samsung s7 edge doesn't. Not even on a different computer, with Win 7. Just now I did a factory reset, again. And also tried to boot in safe mode. But it just doesn't work. Do you have other idea's?
Jobiscky said:
Thanks for your response. I've already tried that several times. Just to be totaly sure i've tried it again with the link you've provided and sadly it didn't work. The thing is that the samsung a5 2017 and the samsung s5 neo, do connect. But the samsung s7 edge doesn't. Not even on a different computer, with Win 7. Just now I did a factory reset, again. And also tried to boot in safe mode. But it just doesn't work. Do you have other idea's?
Click to expand...
Click to collapse
It's not your computer obviously. Maybe the cable port on the s7e is broken or something. Or the drivers aren't getting properly installed on the machine. The com port used by odin doesn't require drivers to be installed separately for each device. So if other devices get recognized by Odin, it clearly means that your s7e requires some hardware replacement. You may try connecting another device of the same model
I have the same problem before. My s7 doesnt work fast charge and pc dont recognize and my phone charging 6 hours. Windows gives yellow error and doesnt recognize my phone. I try different cable and pc but doesnt work. I change my motherboard and it works
nereloyka13 said:
I have the same problem before. My s7 doesnt work fast charge and pc dont recognize and my phone charging 6 hours. Windows gives yellow error and doesnt recognize my phone. I try different cable and pc but doesnt work. I change my motherboard and it works
Click to expand...
Click to collapse
Whaaat?? Change the motherboard