Complete tutorial to boot oreo rom - K3 Note General

Hello friends
After reading many comments and reading many tutorials k3 note users face Oreo ROM do not boot and shows no os is installed or it gives bootloop.
If you are facing these problems then this tutorial help you to boot into Oreo rom successfully.
I know that there is no stable Oreo rom but people try to flash Oreo rom because it is new and having new features .
Firstly use ressurection remix Oreo rom because it is more stable then linage os also it hase endless customisation.
Always use latest twrp for flashing roms ( all links are given at bottom).
So,let's go
1.Firstly boot to your current installed twrp and flash the given twrp.
2.Boot to new recovery and wipe except internal storage I prefer clean install because it does not give any errors.
3.Flash the RR Oreo rom if it shows error again wipe and boot into recovery it does not show any error wait for the installation.
4.Flash latest Gapps nano&picco(arm64) I prefer nano
5.This part is important flash magisk or super su as your wish for root permission.
6.This is the most important part don't boot because we need to path the boot.flash the boot image when you flash the image it shows many options like nvram,recovery etc. choose boot and flash the image .
7.Now boot to system you don't see any error like is is not installed or bootloop.
NOTE:- the boot image I only tried in ressurection remix so try in another roms I don't now it will work or not.
I did not take any responsibility if your phones completely dead,blast or anything.
Please take full nandriod backup into twrp of anything goes wrong.
Download links
This is my second post so I can't add links.so comment in comment section I will give you rom link .
Note- all files are one place for easy downloading
Please comment below if you successful boot.
Inside download link microg and viper4andriod is also avalible if you like to use then download.
If you don't now rooting or flashing roms please don't waste your time
If you fail to boot don't blame me
IF DOWNLOAD LINK NOT WORK OR NOT PRESENT PLEASE SEE THE COMMENT SECTION I WILL GIVE
THANKS FOR YOUR SUPPORT
Credit
g i z d e v developers
Afleckcrimson

Afleckcrimson said:
Hello friends
After reading many comments and reading many tutorials k3 note users face Oreo ROM do not boot and shows no os is installed or it gives bootloop.
If you are facing these problems then this tutorial help you to boot into Oreo rom successfully.
I know that there is no stable Oreo rom but people try to flash Oreo rom because it is new and having new features .
Firstly use ressurection remix Oreo rom because it is more stable then linage os also it hase endless customisation.
Always use latest twrp for flashing roms ( all links are given at bottom).
So,let's go
1.Firstly boot to your current installed twrp and flash the given twrp.
2.Boot to new recovery and wipe except internal storage I prefer clean install because it does not give any errors.
3.Flash the RR Oreo rom if it shows error again wipe and boot into recovery it does not show any error wait for the installation.
4.Flash latest Gapps nano&picco(arm64) I prefer nano
5.This part is important flash magisk or super su as your wish for root permission.
6.This is the most important part don't boot because we need to path the boot.flash the boot image when you flash the image it shows many options like nvram,recovery etc. choose boot and flash the image .
7.Now boot to system you don't see any error like is is not installed or bootloop.
NOTE:- the boot image I only tried in ressurection remix so try in another roms I don't now it will work or not.
I did not take any responsibility if your phones completely dead,blast or anything.
Please take full nandriod backup into twrp of anything goes wrong.
Download links
This is my second post so I can't add links go
G I z d e v,here you find official and unofficial supported devices find k3 note and download all the required files .
Note- all files are one place for easy downloading
Please comment below if you successful boot.
Inside download link microg and viper4andriod is also avalible if you like to use then download.
If you don't now rooting or flashing roms please don't waste your time
If you fail to boot don't blame me
IF DOWNLOAD LINK NOT WORK OR NOT PRESENT PLEASE SEE THE COMMENT SECTION I WILL GIVE OT.
THANKS FOR YOUR SUPPORT
Credit
g i z d e v developers
Afleckcrimson
Click to expand...
Click to collapse
Download link?

No download link?
Heamnath said:
Download link?
Click to expand...
Click to collapse
Where can I find download link?

Were can i find the download link?

Related

ZTE Blade A2 Plus Rooting( SuperSU or Magisk),Recovery & Flashing Stock Rom

Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You
MIUI 9 For A610 Plus
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]
Rajevpmavoor said:
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]
Click to expand...
Click to collapse
Although the rom is bugless but, unfortunately VOLTE didn't work.
MIUI 9 For A610 Plus
Did you flash this new MIUI 9 ROM , I think it has volte and it is in Android M.
Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
does it boot into meta mode on pressing volume down+power button??( bcoz my fone boots into meta mode on doing so)
and how to go into bootloader?
while using sp flash tool i power off the fone and then connect it to sp flash tool via usb cable ...fone gets detected and but download for twrp doesnt occur ..it says PMT changed for the rom, select format all+ download ....
but i didnt do format all coz i dont have flashable stock rom...
I lost my IMEI after flash ROM, not able to retrieve IMEI
Issue in camera & Finger Lock
Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
I have checked both ROM, Miui ROM camera is look like .02MB, No VOLTE, Finger Print lock is not working
Thanks. I have messed up anyway...
Anybody have a complete Readback (Using SP-Flash Tools) copy of (volte) rom?
I lost Imei, From the given NVram.bin, Could not edit Imei using BPGL.... pull as Maui Meta and SN writer can not do this with present update.
I need to revert back. please help with ROM copy and NVRAM Edit.
Alfonso Osnofla said:
Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You
Click to expand...
Click to collapse
Just try http://www.ztedevice.com/support/detail?id=FE22BEF5C33D4A17BCDA20AAE2631951 ( http://download.ztedevice.com/support/product/569/201802111051594/sd/20180211105554767.zip )
sd card update using twrp.
But first remove the first line from update script file located inside the zip.
Just reply.
Need MIUI rom
Heyy plz gime me teh rom for zte blade A2 plus i really need a miui rom for zte blade A2 plus...
Help I'm confused.
Reading the comments i got to know that many people lost their IMEI and VOLTE , I want to root the device So can anyone tell me when does this problem occur (loosing volte and imei) during rooting or while flashing a custom rom?
kingksath said:
I lost my IMEI after flash ROM, not able to retrieve IMEI
Click to expand...
Click to collapse
Did you loose your IMEI on rooting or while flashing any custom Rom?
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
What is it for?
Is it for volte?
vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
Is this an update to the Stock Rom?
hi, can u help me please, iam tryin to update with twrp , i did remove first line from script but i have error.
Found a way to unlock bands on MTK based phones by flashing basebands from phones with the same chipset. Doing this by using SPFLASH and flashing md1 files. Still unable to connect to cell network on my Doogee bl12000. Flashed this phones MD1, was wondering if anybody could provide me with the nvdata and nvram from the ZTE blase a2 plus. Hoping by flashing those files can connect to a U.S. network.

am getting crazy because of my op5 please help

hi
my phone was running oos with an open bootloader and i have installed twrp 3.2.2.1 and tried to flash many roms inlcuding xos and nolimits and pixel experience and resurrection remix they all have problems like when i tried to reboot after flashing the system its give me a black screen with white led or it get me back to bootloader or it gets stuck at the logo the only rom that worked for me was lineage os i dont know why please help
and it gives me error 7 with some roms failed to update system image
If you can get in recovery copy youre stuff to PC (pictures, muzic, etc.).
Install in FASTBOOT latest twrp blu spark. Or directly from recovery.
Format data in recovery.
Instal what ever rom you want.
Max435 said:
hi
my phone was running oos with an open bootloader and i have installed twrp 3.2.2.1 and tried to flash many roms inlcuding xos and nolimits and pixel experience and resurrection remix they all have problems like when i tried to reboot after flashing the system its give me a black screen with white led or it get me back to bootloader or it gets stuck at the logo the only rom that worked for me was lineage os i dont know why please help
and it gives me error 7 with some roms failed to update system image
Click to expand...
Click to collapse
What were you coming from? Base version? Were you on nougat moving to Oreo?
Have you updated your firmware?
Use the newest version of TWRP.
Are you encrypted? Decrypted?
If you're on nougat, follow the now relatively up to date guide In my signature.
You'll need to back up first.

Updating Android on SM-T560

I got a brand new Samsung Tab E 9.6" (SM-T560). Shame on me, I didn't notice before it comes with Android 4.4.4
As many apps require newer OS, I'm wondering if I can upgrade it to Android 6.0.
Plase note:
1. I'm not an expert, so please explain me as easy as possible how to do it, if it can be done;
2. please tell me, in case,if it's 100% legal and/or if it can void warrant.
Thank you.
Samsung Tab E
Check again --- Just picked up the same thing this week at Walmart for $129.00 + $25 Google Play credits - it came with 7.1.1. - Take it back sounds like you got some real old stock..
They do come with Android 4.4, however if you go to Samsungs web page you can find a crispy 7.1.1 image you can flash with Odin. Then if you wish you can unlock bootloader and flash a custom recovery like CWM or TWRP and then chainfires systemless root. Cheers! Upgrading to just 7.1.1 with Odin will not void your warranty, anything else that involves unlocking the bootloader will and is will trip samsungs knox security feature. If warranty is important only flash the 7.1.1 image using Odin.
Hello,
I'm searching forsuch an update, too. But It seems, that it was only released for USA and CA. But I'm from Germany. @xSLAYERx do you have a link to the ROM?
xSLAYERx said:
They do come with Android 4.4, however if you go to Samsungs web page you can find a crispy 7.1.1 image you can flash with Odin. Then if you wish you can unlock bootloader and flash a custom recovery like CWM or TWRP and then chainfires systemless root. Cheers! Upgrading to just 7.1.1 with Odin will not void your warranty, anything else that involves unlocking the bootloader will and is will trip samsungs knox security feature. If warranty is important only flash the 7.1.1 image using Odin.
Click to expand...
Click to collapse
heya, could you please share a link of this 7.1.1 with me? or the image itself, I can't find it anywhere and I'm stuck with 4.4.4
thank you!
hurkagyurka123 said:
heya, could you please share a link of this 7.1.1 with me? or the image itself, I can't find it anywhere and I'm stuck with 4.4.4
thank you!
Click to expand...
Click to collapse
Hi, I was with the same problem, and I posted here in XDA, I'm from Brazil, i have the model SM-T560, and now i'm using nougt, from Lineageos 14.1, and this was only possible, because someone from Xda, gave me the following link:
http://www.gearappsnap.com/2018/03/14/how-to-install-android-nougat-on-the-galaxy-tab-e-sm-t561/
The rom is of the SM-T561 model, but also works on the SM-T560, read everything before doing anything. When installing TWRP, you can install the version of the SM-t560, which will not make any difference.
One more thing, I advise you to see some YouTube tutorials how to install TWRP. Just in case.
Thank You for your help!
hurkagyurka123 said:
Thank You for your help!
Click to expand...
Click to collapse
For nothing, follow step by step that will work perfectly. Except this will end your warranty, but it's the only way to install an update. If you need any help, just talk.
gearappsnap site is not really good made.. The download links behind text which look like a normal one and also that it says, flash boot.img only when the memory is wrong..
Well, CM14.1 did not work for me.. I had to flash boot.img before EVERYTHING else, then rebooted again to TWRP and THEN install cm14.1.
Um, did you follow step by step?
I followed what was written, and for me it worked normal, The boot.img file is to fit just the memory of the table because it had some problem with the rom, without installing it, has tablet that got locked in infinite loop. And the links were working normal for me.
Links that i download:
ROM: https://drive.google.com/file/d/1D0wrGM4XyZMo-t3ll4trvJ93Pl1KEZ1V/view
Boot.img: https://drive.google.com/file/d/1bqGmu4NTlEeKdsFPGjIY9lnPqujjazr4/view
softkeys: https://drive.google.com/file/d/1ddSB28g1xTd0J7sl8V6QmlPZA1aX77ot/view
Gaps: https://opengapps.org/
First the TWRP is installed, with the battery above 70%, then restarts the tablet.
Within the TWRP:
1) Wibe-> advanced wibe-> selects almost anything but not microSD and OTC. and Wibe.
2) Back to the home page-> Install-> select the external storage (the files must be saved on the SD card).
3) The first file to be installed is the rom.
4) Once installed, go back to the files and at the bottom of the page you will click install image and install boot.img.
5) After Boot.img is installed, switch back to Install Zip, and Install the Softkeys.
6) After installing the softkeys go back and install the Gaps. (I used the ARM-7.1-Pico) and restart the tablet.
In my case I did not install superSU. That's what I did. This rom has some flaws but better than Kitkat, that's what I think.
thE_29 said:
gearappsnap site is not really good made.. The download links behind text which look like a normal one and also that it says, flash boot.img only when the memory is wrong..
Well, CM14.1 did not work for me.. I had to flash boot.img before EVERYTHING else, then rebooted again to TWRP and THEN install cm14.1.
Click to expand...
Click to collapse
HEY!
download this: https://mega.nz/#!yEpjCITA!9EA101hYDOajDwmBHKxSZhv3QkV-RI61MkLn0JYNRZY
unzip and install and follow steps.
1-install TWRP 3.0.2-1 via odin
2- copy ALL files of .zip in one folder in storage (mem stick)
3- power off and then power on IN TWRP (vol + + home + power button)
4- make full wipes except externar storage
5- install zip (first choice lineage -14, then choice open gapps, next choice key.zip)
6- install img (choice boot.img)
7- WIPE (Dalvik, cache)
enjoy android 7.1 in your tab e T560
63or63 said:
HEY!
download this: https://mega.nz/#!yEpjCITA!9EA101hYDOajDwmBHKxSZhv3QkV-RI61MkLn0JYNRZY
unzip and install and follow steps.
1-install TWRP 3.0.2-1 via odin
2- copy ALL files of .zip in one folder in storage (mem stick)
3- power off and then power on IN TWRP (vol + + home + power button)
4- make full wipes except externar storage
5- install zip (first choice lineage -14, then choice open gapps, next choice key.zip)
6- install img (choice boot.img)
7- WIPE (Dalvik, cache)
enjoy android 7.1 in your tab e T560
Click to expand...
Click to collapse
In reality you have to install boot.img and softkeys before, the reason is because they are modified for the T56X, otherwise install themselves after the gaps will give error when to use. At least it is what was written on the site, and so far I have been using no defect at all.
marcelo010 said:
In reality you have to install boot.img and softkeys before, the reason is because they are modified for the T56X, otherwise install themselves after the gaps will give error when to use. At least it is what was written on the site, and so far I have been using no defect at all.
Click to expand...
Click to collapse
I do not think that is effective. if you come from 4.4.4 and install it before the lineage ROM (BASE 7.1 for example) it will be erased again because with the new base everything is overwritten.
63or63 said:
I do not think that is effective. if you come from 4.4.4 and install it before the lineage ROM (BASE 7.1 for example) it will be erased again because with the new base everything is overwritten.
Click to expand...
Click to collapse
Well that didnt work for me.. Was coming from Stock 4.4 ROM. Flashed the CM14.1 AND softkeys, but NOT the boot.img, because you cannot flash zip and img files at the same time. Then I booted it and it crashed 10-60secs after it booted. Sometimes it had a boot loop.
Then I tried CM 13 which worked fine and in a german board, someone wrote (based on the gearappsnap site) that the boot.img has to be the first thing to flash and even reboot into twrp again and then flash CM14.1 + softkeys + gapps.
If you could install it, that's what matters, in my case it worked the way it was on the site, there are some bug's, but it's a lot better than the stock rom, and I was already using a custom rom on the T560 before installing this LineageOS 14.1,and it was this link:
https://forum.xda-developers.com/galaxy-tab-e/development/rom-lightning-t3716039
Szia!
did the upgrade work for You For galaxy tab e?
Done this and it worked but.........
The tablet is really slow, not netflix compatible with this version, and so on....
I think I just might downgrade again
After I have tried step 3, it didnt open in twrp mode. My tab stucks in black screen with "Samsung galaxt tab e " text in background.Please let me know how to proceed.
[QUOTE = "63or63, Post: 78613279, Mitglied: 4438103"]
HI THERE!
Download this: https://mega.nz/#!yEpjCITA!9EA101hYDOajDwmBHKxSZhv3QkV-RI61MkLn0JYNRZY
unzip and install and follow the steps.
1-install TWRP 3.0.2-1 through odin
2- Copy ALL .zip files to a folder in memory (mem stick).
3- turn off and then turn on IN TWRP (vol + + home + power button)
4- Make full towels except for external storage
5- install zip (first choice line -14, then select open gaps, next choice key.zip)
6- install img (choose boot.img)
7- WIPE (Dalvik, Cache)
enjoy Android 7.1 in your Tab e T560
[/ZITAT]
1000 tanks BR
.
1000 x danke es hat funktioniert
Translation: 1000 x thank you it worked

All Aroma Fails to boot SMN-9500 LTEXX

my phone was running resurrection remix 7.1.2 with no issues i thinked of installing note 7 ported rom on my phone my phone has TWRP 2.8.7.0 installed with aroma support and my phone varriant is LTEXX i downloaded MAGMA NX and flashed it without any issue but after reboot it got in bootloop even it wont display boot logo i tried again wipping dalvik cache but still it wont boot up then i flashed phantom kernal and flshed magma again but no use, i also tried Note 7 port by Dark Lord having builtin kernel in rom it was also Aroma Supported it also installed without any error but after reboot from twrp it stuck in bootloop, kindly help me what can be the issue? how can this be solved
Usual reason .
User fails to read Op and fails to read the roms FAQS.
Especially the one regarding bootloop.
I Do Read Faqs & Requirement+ Tutorial
JJEgan said:
Usual reason .
User fails to read Op and fails to read the roms FAQS.
Especially the one regarding bootloop.
Click to expand...
Click to collapse
i always read faqs, requirments etc before flashing any rom, i downloaded rom which was for my phone and also flashed kernel given by developer of that rom but it stills fails to boot up after succesfull aroma installation i used twrp 2.8.7.0, i also followed tutorials on youtube which also failed.
Ripee & Lord Eko seniors members of xda told that i have a odd device when i was trying to flash twrp 3.0 it also wont boot up after flashing they said by device bootloader is stuck with LP bootloader and only way to flash newer android version is that you will have to flash modified version of twrp 3 by Ripee senior xda member which will only be able to flash Ressurection Remix OS 7.1.2 but will not be able to install or use newer version than Ressurection Remix.
then i thinked of installing MAGMA NX so i flashed twrp 2.8.7.0 from official twrp website as only this version supports aroma installation and was also suggested in tutorial but all what i got is after installation boot up fails and keep restarting.
Thanks for not posting that in OP.
kindly guide if i am doing wrong
JJEgan said:
Thanks for not posting that in OP.
Click to expand...
Click to collapse
i am not blaming developers or xda members i made a request to get help, kindly guide if i am doing wrong as i am not a developer but a normal user
That information in your original post was 100% missing is all i am saying .
help can only be given on the information provided .
<<which will only be able to flash Ressurection Remix OS 7.1.2 but will not be able to install or use newer version than Ressurection Remix.>>
Suggest you stick with that one or stock.
Alternative work through Magna faqs and instructions .
Even ask in the roms thread with full details .
etc etc
.** Keep current kernel option supported (Be sure Kernel installed before ROM installation)
After booting up in settings wizard, Be sure uncheck diagnostic data
FAQ 18
JJEgan said:
That information in your original post was 100% missing is all i am saying .
help can only be given on the information provided .
<<which will only be able to flash Ressurection Remix OS 7.1.2 but will not be able to install or use newer version than Ressurection Remix.>>
Suggest you stick with that one or stock.
Alternative work through Magna faqs and instructions .
Even ask in the roms thread with full details .
etc etc
.** Keep current kernel option supported (Be sure Kernel installed before ROM installation)
After booting up in settings wizard, Be sure uncheck diagnostic data
FAQ 18
Click to expand...
Click to collapse
1. Device Model (e.g. N900S)
Ans. SM-N9005
2. Bootloader and Baseband (whole code or last 3 characters: N9005XXSGBQA1 or QA1)
Ans. Bootloader: N9005XXSGBQD1
Baseband: N9005XXUGPQB1
3. Your recovery version (e.g. TWRP 2.8.7.0, philz 6.48.4,...)
Ans. TWRP 2.8.7.0
4. Wipes done in recovery before flashing.
Ans. Yes Dalvik, system, data, cache
5. Your choices in aroma installer:
a. Device model chosen
Ans: Samsung Note 3 International (SM-N9005/9006)
b. Kernel choice (or preinstalled)
Ans. guguodas R5
c. CSC choice
Ans. KSA
d. Debloatable apps
Ans. Default
e. SystemUI
ANs. Note 8/S8 Themed+Status Bar Hidden Button+Center Clock
f. UDS
Ans. UDS Uninstall
g. White/Green Battery
ANs. Green Battery
h. Launcher Choice
Ans. Default
i. Extra options (4G, dual stereo and etc)
Ans. Yes Checked All
j. Camera choice
Ans: Galaxy N7 Camera
k. Sound MOD
Ans. Xtreme|Viper|Dolby
l. NTP address
Ans. Pakistan
m. Root option
Ans. Magisk
n. Busybox option
Ans. Install
o. Xposed option
Ans. Uninstall all xposed
p. Wipe in aroma
4. Any other zips flashed?
Ans. NO
5. Any other modifications done?
Ans. No
That's not Faq. 18.

A Guide To Install Android 10 (With Fixes) on Redmi 7a

Hello,
I know that ROM developement on redmi 7a has been extreemly slow, but we all know that redmi 7a is a treble enabled device and therefore we can install every android GSI as long as it is ARM32-BINDER64-AB, yes and i wouldn't explain it here you can read it over here here.
So i thought that i should give you guys a little guide on how to install GSIs and custom ROMs and yeah with volte fix too
NOTE - I AM NOT RESPNSIBLE IF YOUR DEVICE GETS BRICKED OR THERMONUCLEAR WAR TAKES PLACE, YOUR WARRANTY IS VOID FROM THIS STEP ON, I AM NOT RESPONSIBLE IF YOUR DEVICE GETS BRICKED MAKE SURE YOU HAVE MOVED YOUR DOWNLOADED ROMS AND GAPPS TO A PC OR A SD CARD I AM NOT RESPONSIBLE FOR ANYTHING
1] The very important first step is to unlock your bootloader.
2]The second step is to patch your boot image (if you want to root it with magisk)
3] Install the custom recovery of your choice
Download the TWRP file from here
you also can install TWRP forks like
PICTHBLACK RECOVERY PROJECT or PBRP from here
SHRP RECOVERY from here (i wouldn't recommend this one if you are flashing this for the first time)
If you have your device drivers installed but you dont have adb installed then please download this file and extract it to a suitable folder where your downloaded recovery is extracted and run cmd-here and follow these steps given below
Code:
fastboot devices
this will show you if your device is connected or not.
Code:
fastboot flash recovery (your recovery name.img)
Code:
fastboot reboot
you have to keep pressing you volume increase button to reboot to recovery
4] You have to wipe DATA first then, reboot to recovery and go to mount select system (if it's unchecked)
5] Go to WIPE -> ADVANCED WIPE -> Select SYSTEM - DALVIK CACHE - CACHE - INTERNAL STORAGE
6] The list for the available GSIs or ROMs is ----
1) LineageOS thanks to ExpressLuke (GSI) (You might have to downgrade your miui to be able to boot)
2) HavocOS thanks to Skulshady (GSI) (Boots just fine with any version of miui volte patch is needed)
3) Mokee thanks to GuaiYiHu (ROM) (No worries about anything)
4) AOSP Special thanks to Phhusson (GSI) (Boots just fine without any hiccups volte patch is needed)
5) CAOS by Erenmitein (GSI) (Not tested)
6) CrDroid By Erenmitein (GSI) (tested needs the bolte fix patch. please follow the steps given below)
7] Move your GSI img (extract the .xz file) the extension is going to be .img and will not visible in TWRP or it's forks unless you select the INSTALL IMAGE option in the FLASH section and GAPPs
8] Flash your GSI as a System Image
9] Reboot to recovery again and flash your GAPPS ignore if it says no OS installed when rebooting to recovery
10] The fix for VOLTE is here thanks to Khushraj Rathod
you just have to flash it from TWRP or its forks
11] The first reboot will take some time and voila your GSI has been installed (flashed).
12] For Mokee, personaly i love Mokee rom with its boot animation, you can just flash your zip through twrp with gapps.
Thanks @Faithof_Eden for your detailed instructions. So far I always failed with the already existing manuals of other authors.
One question: What if I don't want to root the device at all, neither with Magisk nor otherwise?
You wrote: "2]The second step is to patch your boot image (if you want to root it with magisk)"
Is it then necessary to carry out step number 2 at all?
kra_ppo said:
Thanks @Faithof_Eden for your detailed instructions. So far I always failed with the already existing manuals of other authors.
One question: What if I don't want to root the device at all, neither with Magisk nor otherwise?
You wrote: "2]The second step is to patch your boot image (if you want to root it with magisk)"
Is it then necessary to carry out step number 2 at all?
Click to expand...
Click to collapse
No.
A problem has occurred during flashing:
After I flashed the AOSP image (system-quack-arm32_binder64-ab-vanilla.img) using TWRP and want to restart the recovery to install GAPPS, the Redmi 7a goes directly into fastboot-mode.
No chance to get into TWRP with the Volume-up button.
Even reflashing Recovery does not help. I've done all wiping in TWRP as indicated.
Havoc (an Mokee - but I dont like it) was finally successfull, but only by formating Data and not to wipe internal Storage....
kra_ppo said:
A problem has occurred during flashing:
After I flashed the AOSP image (system-quack-arm32_binder64-ab-vanilla.img) using TWRP and want to restart the recovery to install GAPPS, the Redmi 7a goes directly into fastboot-mode.
No chance to get into TWRP with the Volume-up button.
Even reflashing Recovery does not help. I've done all wiping in TWRP as indicated.
Click to expand...
Click to collapse
Flash vbmeta
Moke os not working speaker áudio
---------- Post added at 09:27 PM ---------- Previous post was at 09:26 PM ----------
Moke os calls not work
how to get back to stock ROM ?
idcamper said:
Moke os not working speaker áudio
---------- Post added at 09:27 PM ---------- Previous post was at 09:26 PM ----------
Moke os calls not work
Click to expand...
Click to collapse
You flashed floor miui 10.0.2.5.?
can't i do this with twrp? Tutorial ?
Flammenschwert1337 said:
Flash vbmeta
Click to expand...
Click to collapse
Did you find solution?
lslayer4231 said:
Did you find solution?
Click to expand...
Click to collapse
Start with miui 10.0.2.5.
Then go on.
My phone bootloops to redmi logo and recovery after flashing, any help from this?
After installing latest havoc 3.7 gsi the call recording feature not working though normal sound recording works... Any fix?
Hey, guys!
Havoc OS GSI is selinux permissive or enforced?
Is it possible to go back to stock rom by doing a backup using twrp?
I'm sorry if I'm being dumb, but as you already noticed, I'm newbie.
MEMO#22 said:
My phone bootloops to redmi logo and recovery after flashing, any help from this?
Click to expand...
Click to collapse
Switch back to miui 10 global version and install twrp
Has anyone else got media playout over bluetooth OK and if so, which GSI or ROM and which base firmware, please? It does not work for me with AOSP on latest EU firmware. Only calls go to BT.

Categories

Resources