Related
I used TheStrix recovery 3.0M4 for the entire procedure.
Apps that have to write alot to cache like google maps, google earth, are MUCH faster with F2FS.
Make a nandroid backup if you want to revert to your current rom (common sense, no?)
Short video showing all add-ons - https://youtu.be/p9Zyb3C4gQ4
1) First Step
a. install cm13 firmware or install marshmallow miui rom (when installing miui rom with miflash you must allow the rom to boot once to create a proper partition table then reboot to recovery and wipe)
b. wipe all except sd and internal storage
c. install rr or rr-fk rom
d. install gapps if desired (arm64 6.0)
e. reboot to system (this particular reboot can take up to five minutes, be patient)
f. allow setup screen to appear
g. reboot to recovery after 30 secs on setup screen
2) Second Step
a. clear ONLY dalvik
b. install xposed uninstaller (using the xposed uninstaller before installing the framework is the install method recommended by the xposed developers)
c. install xposed framework
d. reboot to system (this particular reboot can take up to five minutes, be patient)
e. allow setup screen to appear
f. reboot to recovery after 30 secs on setup screen
3) Third Step
a. install supersu
b. reboot to system
c. allow setup screen to appear
d. reboot to recovery after 30 secs on setup screen
e. install goodix fix if you have goodix fp
f. install radon or agni kernel ( if using radon 3.7 make sure to check permissive selinux for goodix, the default is now enforcing )
g. reboot to system
h. complete setup
h. install xposed apk
i. done!
4) Optional for ViPER4Android FX
a. install this version of busybox from play store - https://play.google.com/store/apps/details?id=stericson.busybox
b. open busybox app and allow smart settings to complete (takes 2-3 minutes)
c. click "install" button
d. open viper4android fx apk (link below) and install then open. when viper is installing the driver it may seem like it is hanging. it's not, be patient the driver takes about a minute to install
e. reboot
f. done
5) Optional for F2FS data and cache
a. reboot to recovery
b. install stock boot.img to boot partition
c. install radon or agni kernel ( if using radon 3.7 make sure to check permissive selinux for goodix, the default is now enforcing )
d. convert data and cache to f2fs
--- don't try to skip a step and install goodix patch here, you will get infinite boot logo ---
e. install radon or agni kernel again ( if using radon 3.7 make sure to check permissive selinux for goodix, the default is now enforcing )
f. reboot to system (this particular reboot can take up to five minutes, be patient)
g. allow setup screen to appear
h. for non-goodix (fpc) you are done. remember to install xposed apk when you complete setup and complete the steps below for viper4android fx if you installed it earlier.
i. for goodix reboot to recovery and continue to next step
j. install goodix_fp_8.zip
k. install radon or agni kernel ( if using radon 3.7 make sure to check permissive selinux for goodix, the default is now enforcing )
l. reboot to system
m. complete setup again
n. install xposed apk
o. done
---- only if you installed viper4android fx earlier ---
p. install this version of busybox from play store - https://play.google.com/store/apps/details?id=stericson.busybox
q. open busybox app and allow smart settings to complete (takes 2-3 minutes)
r. click "install" button
s. install viper4android fx apk
t. done!
NOTE: I'm not responsible for you breaking your phone, blah blah blah....
Caveats for F2FS users:
You won't be able to take nandroid backups with zcx, you will have to use a customized recovery like TheStrix M4 recovery that supports mounting f2fs partitions.
Caveats for Xposed:
Since RR has many customization features built in, don't expect all the customization features from modules to work. For example, xstana replaces all icons except the battery icon.
Working:
Everything except backlight duration controller in RR settings. Minimal considering the benefits....
Termux: You must use tsu in place of su to have a proper superuser shell. Just open termux and enter "apt-get update && apt-get install tsu" . After tsu package is installed always use tsu in place of su. tsu is a su wrapper for termux to give you a proper interactive shell. I found this out after su was no longer working correctly in termux. This is true for all CM13 based roms as far as I can tell. I am a happy person now. :victory:
LINKS:
TheStrix Recovery M4 - https://www.androidfilehost.com/?w=file-thanks&fid=24591000424943818&mid=130&download_id=38ii1lgrbetl9irha0pklm89s3&tid=1485389435&hc=62d9b8ba004f8a7fbdbd414846b06e9c60f15e12e6b940178fedf2ec4f4c373e
CM 13 Firmware Link - https://www.androidfilehost.com/?fid=24591000424951192
Unlocked emmc_appsboot.mbn - https://drive.google.com/file/d/0B2w-p-CP_G3FaXVFdWp1ODJOQm8/view?usp=sharing
RR 5.7.4 Final Link - https://basketbuild.com/devs/resurrectionremix/kenzo
RR-FK 5.7.4 Final Link - https://forum.xda-developers.com/showpost.php?p=69825653&postcount=376
OpenGapps Link - http://opengapps.org/
Xposed Uninstaller Link - http://dl-xda.xposed.info/framework/uninstaller/
Xposed Framework Link - http://dl-xda.xposed.info/framework/sdk23/arm64/
Xposed Apk Link - https://forum.xda-developers.com/attachment.php?attachmentid=3921508&d=1477916609
Supersu Link - https://download.chainfire.eu/1016
Radon Kernel Link - https://forum.xda-developers.com/redmi-note-3/development/kernel-t3414884
Agni Kernel Link - https://forum.xda-developers.com/redmi-note-3/development/kernel-25-09-2016-agni-purecm-mm-v1-6-t3469874
Goodix Patch Link - https://yadi.sk/d/YX644C9UvjMNj
ViPER4Android FX Link - https://drive.google.com/file/d/0B2w-p-CP_G3FdnItU2ZrNEZkcms/view?usp=sharing
pinned do it soon, thanks for guide
if i have flashed cm 14.1 firmware then flash again cm 13 firmware it wil locked bootloader or not ? what should i do ?
ozan6661 said:
pinned do it soon, thanks for guide
if i have flashed cm 14.1 firmware then flash again cm 13 firmware it wil locked bootloader or not ? what should i do ?
Click to expand...
Click to collapse
I would suggest flashing the latest global stable marshmallow miui fastboot rom via miflash. Make sure you replace emmc_appsboot.mbn with an unlocked version or else you will be with a locked bootloader and a bad attitude. Be careful with miflash as I have already soft and hard bricked my phone many times with it. If you aren't brave enough just wipe all partitions except internal storage and sdcard then flash cm13 firmware.
Kenzo fastboot global stable 8.1.1.0 link - http://en.miui.com/a-234.html
Choose the one that says "Redmi Note 3 Qualcomm Latest Global Stable Version Fastboot File Download"
Unlocked emmc_appsboot.mbn link - https://drive.google.com/file/d/0B2w-p-CP_G3FaXVFdWp1ODJOQm8/view?usp=sharing
Can you help me with https://forum.xda-developers.com/redmi-note-3/help/request-kenzo-alka-unofficial-bl-steps-t3541497
hyperorb said:
Can you help me with https://forum.xda-developers.com/redmi-note-3/help/request-kenzo-alka-unofficial-bl-steps-t3541497
Click to expand...
Click to collapse
replied just follow this tutorial will be great.
pabloa2 said:
I would suggest flashing the latest global stable marshmallow miui fastboot rom via miflash. Make sure you replace emmc_appsboot.mbn with an unlocked version or else you will be with a locked bootloader and a bad attitude. Be careful with miflash as I have already soft and hard bricked my phone many times with it. If you aren't brave enough just wipe all partitions except internal storage and sdcard then flash cm13 firmware.
Kenzo fastboot global stable 8.1.1.0 link - http://en.miui.com/a-234.html
Choose the one that says "Redmi Note 3 Qualcomm Latest Global Stable Version Fastboot File Download"
Unlocked emmc_appsboot.mbn link - https://drive.google.com/file/d/0B2w-p-CP_G3FaXVFdWp1ODJOQm8/view?usp=sharing
Click to expand...
Click to collapse
have full wipe and flashing recovery rom 8.1.1.0 with zcx and follow the instruction and the last thanks for the rom i use RR-FK work without problem.
Thanks for the guide but can you clarify this which is written in bold " Guide up for Resurrection Remix 5.7.4 + XPOSED + Supersu + F2FS + Goodix or FPC FP (Thoroughly Tested)
It's a little lengthy but now I just might have the most badass phone in the universe... Cheers!"
Can you post Benchmarks/ battery usage etc?
Is this even any good? What are the benefits
Dalbin Reji said:
Is this even any good? What are the benefits
Click to expand...
Click to collapse
Um.... Let's see.... RR with f2fs and xposed.... Lol... Look man if you can't take 30 minutes to try something yourself, I don't know what to tell you honestly....
hayabusa_ryu said:
Thanks for the guide but can you clarify this which is written in bold " Guide up for Resurrection Remix 5.7.4 + XPOSED + Supersu + F2FS + Goodix or FPC FP (Thoroughly Tested)
It's a little lengthy but now I just might have the most badass phone in the universe... Cheers!"
Can you post Benchmarks/ battery usage etc?
Click to expand...
Click to collapse
Here I'll clarify it for you. "Resurrection Remix 5.7.4 + XPOSED + Supersu + F2FS + Goodix or FPC FP"
You removed the fourth step? Also please post antutu benchmark and SOT. You should also post steps to return back to stock in case someone does not like this.
hayabusa_ryu said:
You removed the fourth step? Also please post antutu benchmark and SOT. You should also post steps to return back to stock in case someone does not like this.
Click to expand...
Click to collapse
i got 7h SOT with LTE and unstable signal, my antutu is 70k with radon 3.5 with all stock
I have gotten ~76000 with with stock kernel and rom. SOT, I never noticed but it is good in dual sim setting, LTE and 3g + data always on and WiFi Hotspot too.
hayabusa_ryu said:
You removed the fourth step? Also please post antutu benchmark and SOT. You should also post steps to return back to stock in case someone does not like this.
Click to expand...
Click to collapse
Post steps to return to stock? Ok... Make nandroid backup. Restore nandroid backup.......
ozan6661 said:
i got 7h SOT with LTE and unstable signal, my antutu is 70k with radon 3.5 with all stock
Click to expand...
Click to collapse
Thats kernel or, screen brightness is close to 100. I'm getting the same as always with radon kernel 3.6 stock balanced. 7 hrs with brightness at 100 and 10-11 hrs with screen at appx 50 percent. Antutu with stock balanced radon 3.6 and balanced battery profile, 76k.
ozan6661 said:
i got 7h SOT with LTE and unstable signal, my antutu is 70k with radon 3.5 with all stock
Click to expand...
Click to collapse
Make you are on latest miui firmware. I have LTE and signal is rock solid. As always, wipe all, followed by format data, followed by flashing latest miui firmware. Then flash your marshmallow roms.
hayabusa_ryu said:
You removed the fourth step? Also please post antutu benchmark and SOT. You should also post steps to return back to stock in case someone does not like this.
Click to expand...
Click to collapse
I removed a lot of steps because i didn't know about the strix recovery m4 version which solves many problems. I added a new fourth step just for you.
pabloa2 said:
Here I'll clarify it for you. "Resurrection Remix 5.7.4 + XPOSED + Supersu + F2FS + Goodix or FPC FP"
Click to expand...
Click to collapse
Av tried this before and it's not as complicated as you make it sound
Dalbin Reji said:
Av tried this before and it's not as complicated as you make it sound
Click to expand...
Click to collapse
It was complicated as hell until i found strix m4 recovery then things became a WHOLE lot easier. anyways if you don't want to try the rom and just want to say stupid things for no reason, go somewhere else. it took me almost a week pinning down the most direct, fastest way of accomplishing what i wanted. rr with xposed, supersu, f2fs, goodix fp, and viper audio. it's good there's lots of people out there that actually do things with their time instead of talking nonsense on some random xda thread. Now that I figured out all the steps through trial and error because RR never wants to boot if you do one little thing wrong of course it's easy. It took me around 10 hours of total time to figure out the exact steps so RR wouldn't freeze on the boot logo. Do you want to try another method? Be my guest, have fun looking at the RR logo for the next 10 hours. Oh, and don't forget to spend an hour writing a guide about how you did it too.... thanks.
When flasing the RR-fk waht should i do with the Device tree? Can u give the link for me to learn? Search in google and confuse which i should read first... Thx before
CalebWang said:
When flasing the RR-fk waht should i do with the Device tree? Can u give the link for me to learn? Search in google and confuse which i should read first... Thx before
Click to expand...
Click to collapse
The rr-fk rom is BUILT WITH an optimized device tree. before you ask the same question on two different threads read the answer carefully.
Dear Friends,
My sister has Asus Zenfone 5 t00j kitkat version.
I would to install a custom ROM. I am not familiar with this model. Please solve my doubts:
1. Need to upgrade kitkat firmware before install Android 7 based custom ROM?
2. Which custom ROM is stable for asus t00j ?
Please give me the link
vimal0212 said:
Dear Friends,
My sister has Asus Zenfone 5 t00j kitkat version.
I would to install a custom ROM. I am not familiar with this model. Please solve my doubts:
1. Need to upgrade kitkat firmware before install Android 7 based custom ROM?
2. Which custom ROM is stable for asus t00j ?
Please give me the link
Click to expand...
Click to collapse
I will recommend you to first upgrade your Android version to lollipop with latest firmware version ww-3.24.40.87 .
After upgrading, root your device and after that unlock your bootloader.
For rooting method, search in Asus zenfone 5 forum.
And for unlocking bootloader you can visit this link below-
https://forum.xda-developers.com/zenfone-5/general/guide-how-to-unlock-bootloader-safely-t3562640
After unlocking bootloader you need to flash the TWRP Recovery. You can unlock bootloader and install twrp together in just one click. For that just visit the above link provided.
Now I'm assuming that you have rooted your phone and also your bootloader is unlocked and latest twrp is installed. So now head over to "Android development" forum of zenfone 5 and search for Resurrection Remix 5.8.2 by tank0412. This ROM is stable and also the developer is providing weekly updates.
I hope that this will help you out.
juyel92 said:
I will recommend you to first upgrade your Android version to lollipop with latest firmware version ww-3.24.40.87 .
After upgrading, root your device and after that unlock your bootloader.
For rooting method, search in Asus zenfone 5 forum.
And for unlocking bootloader you can visit this link below-
https://forum.xda-developers.com/zenfone-5/general/guide-how-to-unlock-bootloader-safely-t3562640
After unlocking bootloader you need to flash the TWRP Recovery. You can unlock bootloader and install twrp together in just one click. For that just visit the above link provided.
Now I'm assuming that you have rooted your phone and also your bootloader is unlocked and latest twrp is installed. So now head over to "Android development" forum of zenfone 5 and search for Resurrection Remix 5.8.2 by tank0412. This ROM is stable and also the developer is providing weekly updates.
I hope that this will help you out.
Click to expand...
Click to collapse
Dear brother,
Thank you for the detailed direction.
Let me try.
vimal0212 said:
Dear brother,
Thank you for the detailed direction.
Let me try.
Click to expand...
Click to collapse
It's mine pleasure.?
And also download the latest lollipop firmware from Asus official website.
juyel92 said:
It's mine pleasure.?
And also download the latest lollipop firmware from Asus official website.
Click to expand...
Click to collapse
T00F files suitable for T00J?
vimal0212 said:
T00F files suitable for T00J?
Click to expand...
Click to collapse
Yes. T00F and T00J both are same.
Just download it from official Asus website.
Just remember your SKU which is ww, tw, or cn.
To check your SKU, go to settings - about phone - and there check which firmware you have officially.
If you have WW firmware then you have to download ww firmware from the Asus website.
Eg. WW > WW
TW > TW
CN > CN
I successfully rooted and unlock the phone.
I failed to update the firmware.
My phone build number (KitKat) is that ASUS_T00J_WW_user_2.22.40.54_2015......
I downloaded and tried to flash the firmware UL-ASUS_T00F-WW-3.24.40.87-user
While updating it shows an error message,
Please use the right SKU for updating.
Please guide me the firmware with right SKU for my phone.
Regards.
vimal0212 said:
I successfully rooted and unlock the phone.
I failed to update the firmware.
My phone build number (KitKat) is that ASUS_T00J_WW_user_2.22.40.54_2015......
I downloaded and tried to flash the firmware UL-ASUS_T00F-WW-3.24.40.87-user
While updating it shows an error message,
Please use the right SKU for updating.
Please guide me the firmware with right SKU for my phone.
Regards.
Click to expand...
Click to collapse
Did you rooted your phone and also did you successfully unlocked the bootloader ????
Did you intalled the TWRP recovery ???
juyel92 said:
Did you rooted your phone and also did you successfully unlocked the bootloader ????
Did you intalled the TWRP recovery ???
Click to expand...
Click to collapse
Phone rooted. I checked with root checker.
Boot loader unlocked using app.
TWRP installed successfully.
Anything else todo?
vimal0212 said:
Phone rooted. I checked with root checker.
Boot loader unlocked using app.
TWRP installed successfully.
Anything else todo?
Click to expand...
Click to collapse
Which app you used to unlock the bootloader ?
And which version of TWRP recovery you have installed/flashed?
juyel92 said:
Which app you used to unlock the bootloader ?
And which version of TWRP recovery you have installed/flashed?
Click to expand...
Click to collapse
I used following app to unlock the boot loader,
UnLock_A500CG_a500cg_platform_rel.apk
TWRP version TWRP-3.0.M2-0.img
vimal0212 said:
Phone rooted. I checked with root checker.
Boot loader unlocked using app.
TWRP installed successfully.
Anything else todo?
Click to expand...
Click to collapse
If your phone is rooted and you have successfully unlocked the bootloader with TWRP installed then now you are ready to install the custom nougat ROM. No need to upgrade your android version with stock firmware. Just proceed forward and follow what I'm saying -
Click here to download Ressurection Remix v5.8.2 nougat ROM
Visit the above link and download the RR ROM.
After downloading the RR ROM, now you have to download the GApps Pico 7.1 x86
Click here to download GApps
Put the downloaded ROM zip file and GApps zip file in your external memory card.
Now steps for flashing the ROM -
1. Reboot to recovery.
2. Go to Wipe section - Advanced Wipe, and then select the cache, dalvik cache, system, data, internal.
After selecting the above, now swipe to wipe.
3. After wiping, go back to wipe section again and tap on "Format Data", and type "yes" and press ok.
4. After formatting completed, go back to main screen and then go to Install section, and locate the ROM zip file. Select it and swipe to flash.
5. Now your ROM is flashed, so go back again and select the GApps zip file and swipe to flash.
6. Now flash the SU Addon (If you want the root access) (OPTIONAL) If you don't want then you can skip this step.
7. Now your ROM and GApps both are flashed, so now go back to main screen again and then go to reboot section,then select "REBOOT SYSTEM"
That's It. You have successfully flashed the new nougat ROM.
First boot will take approx. 5 - 10 mins.
juyel92 said:
If your phone is rooted and you have successfully unlocked the bootloader with TWRP installed then now you are ready to install the custom nougat ROM. No need to upgrade your android version with stock firmware. Just proceed forward and follow what I'm saying -
Click here to download Ressurection Remix v5.8.2 nougat ROM
Visit the above link and download the RR ROM.
After downloading the RR ROM, now you have to download the GApps Pico 7.1 x86
Click here to download GApps
Put the downloaded ROM zip file and GApps zip file in your external memory card.
Now steps for flashing the ROM -
1. Reboot to recovery.
2. Go to Wipe section - Advanced Wipe, and then select the cache, dalvik cache, system, data, internal.
After selecting the above, now swipe to wipe.
3. After wiping, go back to wipe section again and tap on "Format Data", and type "yes" and press ok.
4. After formatting completed, go back to main screen and then go to Install section, and locate the ROM zip file. Select it and swipe to flash.
5. Now your ROM is flashed, so go back again and select the GApps zip file and swipe to flash.
6. Now flash the SU Addon (If you want the root access) (OPTIONAL) If you don't want then you can skip this step.
7. Now your ROM and GApps both are flashed, so now go back to main screen again and then go to reboot section,then select "REBOOT SYSTEM"
That's It. You have successfully flashed the new nougat ROM.
First boot will take approx. 5 - 10 mins.
Click to expand...
Click to collapse
Thank you for the information brother.
Sunday I will try the above-mentioned method.
My cousin went to home with phone!!
Good night.
vimal0212 said:
Thank you for the information brother.
Sunday I will try the above-mentioned method.
My cousin went to home with phone!!
Good night.
Click to expand...
Click to collapse
It's mine pleasure.
If you get any problem then you can ask me anytime.
I would like to share my experience while install RR on Zenfone 5.
I wiped as per the instructions.
When install RR file, I got following error:
E: Failed to sysMapFile .................
Error flashing zip.
Another information is that recovery is Pinaslang version 2.8.6.0.
I think recovery based on TWRP.
I need quick help to overcome the trouble situation.
Regards,
vimal0212 said:
I would like to share my experience while install RR on Zenfone 5.
I wiped as per the instructions.
When install RR file, I got following error:
E: Failed to sysMapFile .................
Error flashing zip.
Another information is that recovery is Pinaslang version 2.8.6.0.
I think recovery based on TWRP.
I need quick help to overcome the trouble situation.
Regards,
Click to expand...
Click to collapse
You cannot flash nougat ROMs with twrp 2.8.6 ,.... As you will end up with several errors so better switch to latest twrp I.e twrp 3.0 xx versions by xanwar . after that you can follow juyels method of flashing the ROM .
Download the twrp version from below link .
1:If you downloading zip file then flash through your old recovery and reboot to recovery .
2: if you downloaded .IMG file then flash through fastboot using the below code
Code:
fastboot flash recovery <filename>.img
Link for latest twrp : here
Dear Friends,
Finally, I could successfully installed RR.
Your suggestions are very timely and helpful.
After installation of TWRP 3, RR installed without any problem.
Thank you again, brothers.
vimal0212 said:
I would like to share my experience while install RR on Zenfone 5.
I wiped as per the instructions.
When install RR file, I got following error:
E: Failed to sysMapFile .................
Error flashing zip.
Another information is that recovery is Pinaslang version 2.8.6.0.
I think recovery based on TWRP.
I need quick help to overcome the trouble situation.
Regards,
Click to expand...
Click to collapse
That's why I asked you before that which version of twrp you have flashed..and you told me that twrp 3.x.x.
That's why this type of problem you are facing. you should told me before that you are using twrp 2.8.6.0 then I will provide you the correct suggestions. Then this errors will never happened to you.
Anyway, @Boomshiva has already helped you out. And also you have flashed the nougat ROM successfully. So now enjoy your new nougat ROM. ?
juyel92 said:
That's why I asked you before that which version of twrp you have flashed..and you told me that twrp 3.x.x.
That's why this type of problem you are facing. you should told me before that you are using twrp 2.8.6.0 then I will provide you the correct suggestions. Then this errors will never happened to you.
Anyway, @Boomshiva has already helped you out. And also you have flashed the nougat ROM successfully. So now enjoy your new nougat ROM. ?
Click to expand...
Click to collapse
Thank you for the support brother. TWRP version was not visible. Now the phone owner very happy
vimal0212 said:
Thank you for the support brother. TWRP version was not visible. Now the phone owner very happy
Click to expand...
Click to collapse
That's great.
I'm glad to hear that from you.
Keep enjoying
What is this?
- sGSI of ZUI 10.0/ 5.0 from Lenovo Z5pro/Z5, based on Android 8.1.0, June 1,2018 security patch.
Since this was requested in some comments, I flashed it and found working for our device flawlessly, with some bugs.
Features?
-All features of ZUI 4 + Soft Charge, gestures, multi space ( dual apps ) etc. Split Screen is also available.
How to flash?
ZUI 10 :
1. Download the flashable zip from the links.
2. Boot to twrp, and wipe dalvik, cache, data, system and vendor.
3. Flash the zip.
4. Reboot.
ZUI 5:
Method 1 : (Recommended)
- 1. Download any treble based 8.1.x rom and ZUI5.0-sGSI.zip (link below).
[Please use MIUI 10 8.11.1 by Narshi Shukla as base ROM, as it seems it's Vendor is most compatible.]
2. Extract the zip in your storage. You will get three files ( two flashable zips and one folder "sGSI.....". [Folder name might differ, there will be only one folder, so no worries])
3. Boot into recovery and take a backup.
4. Clean flash treble based Oreo ROM that you downloaded.
5. From your twrp, use file manager to move " sGSI...." folder to backup folder of Twrp.
6. Mount system and vendor and wipe cache/delvik, data and system.
( Don't wipe firmware and Vendor )
7. Goto restore in your twrp and restore the system from "sGSI....." folder.
8. Flash the remaining two zips.
9. Flash magisk if needed.
10. Wipe cache/delvik and reboot. Done.
Method 2 : https://forum.xda-developers.com/showpost.php?p=78389810&postcount=320
(You need treble based twrp, search if you don't already have).
After following all these steps, if your phone is stuck in Lenovo powered by android screen for long, then force reboot the phone and it will boot up to system.
What works?
-Here:
Call,SMS, VOLTE, Data, play store, Utouch, Fingerprint , Navigation, Double touch to wake, GCAM, Face Unlock, Hotspot, Banking apps, nearly everything.
What doesn't work?
- ROM specific. Bugs depend upon the treble ROM that you used as base. In some ROM, system sounds does not work. In MiUI 10, video recording might not work. Game Mode has some issues with global apps.
*FOR VIDEO RECORDING - see this : https://forum.xda-developers.com/showpost.php?p=78219358&postcount=93 ****
*Update GPU drivers for VULKAN support. Link in the links section.***
Performance?
- Better than ZUI 4, smooth as butter, no stutter playing games like PUBG, notifications on time, decent SOT.
Can it be used as daily driver?
- Yes, if you can live with some Chinese texts in certain apps.
Any other thing?
- Because the ROM is ported from Z5 which has a notch, total area of the notification bar cannot be used. To see things like real time network speed and battery "percentage" you have to pull down the notification bar.
What should I do first after booting the device?
- Install play store from App center. Install magisk to remove bloat wares. Install any music app, since there is none. This will make the system optimal for us.
Also, Turn "True Full Screen Mode" ON in display settings for full screen in Apps.
Install Magisk and download and install "SafteyPatch V2" within Magisk to pass safetynet and hide banking apps in magisk hide to use them.
Open security app and give all important permissions to the apps you use, including system apps. Also include them in autorun/whitelist section.
Links?
-Here
ZUI 10
https://drive.google.com/open?id=17lyWnAl0Kjkv5S89wdtw7HglF2072zP5
ZUI 5
Mega link :
https://mega.nz/#!FyxSiI7Y!iZmmVufR6pipX3mwv_-I3HqI714YAMJN1a2zIysinmc
Gdrive link:
https://drive.google.com/open?id=1F_Ou6x2bj26hhdffw45uo4r9qlJuaDb5
MiUi 10 8.11.1 Narshi Shukla - Full Rom
https://androidfilehost.com/?fid=11410932744536996684
MIUI 10 8.11.1 Narshi Shukla - Vendor for twrp recovery: @(THIS VENDOR isnt compatible with all roms, if facing random reboots, use the complete MIUI 10 ROM for the Gsi)
https://drive.google.com/drive/u/0/folders/15QHEUfLMagMV9jZTmlUHa4hkhkNTF-RC
Working GCAM link :
https://www.celsoazevedo.com/files/android/google-camera/f/MGC_6.1.021_FINAL_V1a_A8.1+.apk
VULKAN enabled open GL 3.2 driver link :
https://drive.google.com/folderview?id=11_atz5CDK9bHG4K_ME2LSRFFnxxKqWw2
Credits:
Not my work, I am just sharing it since I found it working.
All credits goes to this Xiaomi thread and bugrevealingbme.
https://*************/threads/zui-5-0-a-only-treble-rom.226/
******************************** FLASHING ISSUE ******************
While flashing this ROM, try to follow the guide above as strictly as possible. Use the ROM that is recommended.
If you are facing bootloop, download the vendor that is provided and restore it in twrp and then flash patch 1 and 2.
Also remember, during each and every step, your TWRP should have system and Vendor mounted. Check after every step.
Your phone might reboot once or twice during first boot, which is not an issue.
How to know if you flashed it correctly?
-If your phone boots into the system with "Lenovo bootanimation" , you flashed it correctly.
If your phone is stuck in "Lenovo - powered by android" splash image for more than 5 minutes, you got something wrong.
*********************************************************************
Screenshots attached :
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
I have one question. If i install a sgsi rom can i back to trenle, non-treble rom just with a simple flash method?
muujeeb said:
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
Click to expand...
Click to collapse
gcamera is working on redmi note 5 pro. should work also here.
muujeeb said:
what about gcam nd notification bug? and one more doubt, can we flash it over treble pie ROM?
Click to expand...
Click to collapse
GCAM is working.
Notification bug is not there. Only sometimes, it seems that we get late notification.
You have to flash it over Oreo because the GSI is Oreo based. Flashing over pie should work as well, since treble ROM is required. Take a backup of your system so you can restore easily, if you face any issue.
nonamesry said:
I have one question. If i install a sgsi rom can i back to trenle, non-treble rom just with a simple flash method?
Click to expand...
Click to collapse
Yes, you can get back to the ROM you want with simple flash, no problem.
Custom kernel flashable?
ashwinonm said:
Custom kernel flashable?
Click to expand...
Click to collapse
Haven't tested, but should be flashable.
Edit : Custom kernel might brick the device. Will test and update.
Donot flash custom kernel, it causes self restart of device.
Note: Moxie kernels can be flashed, you should flash patch2 after flashing kernels. But, MIUI 10 comes with moxie R5.1 so no use flashing Moxie again.
link not working
Wow it's so beautiful!
I used Arrow OS 8.1 but it got stuck in bootloop and does'nt boot at all.. I followed all the steps accordingly but it did not boot up even after i kept my phone overnight to let it boot. I don't know where i did wrong.
muujeeb said:
I used Arrow OS 8.1 but it got stuck in bootloop and does'nt boot at all.. I followed all the steps accordingly but it did not boot up even after i kept my phone overnight to let it boot. I don't know where i did wrong.
Click to expand...
Click to collapse
Use MIUI 10 port of Narshi Shukla latest build. It works.
May be Arrow OS cannot be used.
You can also try using Vendor of MIUI 10 once. Restore this vendor and the system image of ZUI.
Here is the vendor:
https://drive.google.com/drive/mobile/folders/15QHEUfLMagMV9jZTmlUHa4hkhkNTF-RC?usp=drive_open
kany1 said:
link not working
Click to expand...
Click to collapse
Link is working fine.
jebish7 said:
Link is working fine.
Click to expand...
Click to collapse
yes it is working with mega app
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
---------- Post added at 01:19 PM ---------- Previous post was at 01:13 PM ----------
ok i try to flash it again and boot successflly
marclevine said:
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
Click to expand...
Click to collapse
I think only MIUI 10 rom works flawlessly for this GSI. I will update the main page details and ask to use MIUI 10 only.
You couldnot flash patch 2 because it requires vendor, and may be your vendor is now messed up.
So use MIUI 10 port, it works without any issue.
marclevine said:
I used crdroid 8.1 and got stuck in bootloop. then I try restored the vendor but could not flash the patch 2
---------- Post added at 01:19 PM ---------- Previous post was at 01:13 PM ----------
ok i try to flash it again and boot successflly
Click to expand...
Click to collapse
Glad To hear.
So in whatever rom I am in Oreo , I can use that firmware if I use vendor only from your backup? And shouldn't wipe it?
ashwinonm said:
So in whatever rom I am in Oreo , I can use that firmware if I use vendor only from your backup? And shouldn't wipe it?
Click to expand...
Click to collapse
Well, that's how some people got this working, so yes, it's working that way as well. ( Your ROM should be treble based though )
I will attach the "Vendor" file in the main post as well, so other members can use it too.
custom kernel possible,mine running in moxie
Hello friends
After reading many comments and reading many tutorials k3 note users face Oreo ROM do not boot and shows no os is installed or it gives bootloop.
If you are facing these problems then this tutorial help you to boot into Oreo rom successfully.
I know that there is no stable Oreo rom but people try to flash Oreo rom because it is new and having new features .
Firstly use ressurection remix Oreo rom because it is more stable then linage os also it hase endless customisation.
Always use latest twrp for flashing roms ( all links are given at bottom).
So,let's go
1.Firstly boot to your current installed twrp and flash the given twrp.
2.Boot to new recovery and wipe except internal storage I prefer clean install because it does not give any errors.
3.Flash the RR Oreo rom if it shows error again wipe and boot into recovery it does not show any error wait for the installation.
4.Flash latest Gapps nano&picco(arm64) I prefer nano
5.This part is important flash magisk or super su as your wish for root permission.
6.This is the most important part don't boot because we need to path the boot.flash the boot image when you flash the image it shows many options like nvram,recovery etc. choose boot and flash the image .
7.Now boot to system you don't see any error like is is not installed or bootloop.
NOTE:- the boot image I only tried in ressurection remix so try in another roms I don't now it will work or not.
I did not take any responsibility if your phones completely dead,blast or anything.
Please take full nandriod backup into twrp of anything goes wrong.
Download links
This is my second post so I can't add links.so comment in comment section I will give you rom link .
Note- all files are one place for easy downloading
Please comment below if you successful boot.
Inside download link microg and viper4andriod is also avalible if you like to use then download.
If you don't now rooting or flashing roms please don't waste your time
If you fail to boot don't blame me
IF DOWNLOAD LINK NOT WORK OR NOT PRESENT PLEASE SEE THE COMMENT SECTION I WILL GIVE
THANKS FOR YOUR SUPPORT
Credit
g i z d e v developers
Afleckcrimson
Afleckcrimson said:
Hello friends
After reading many comments and reading many tutorials k3 note users face Oreo ROM do not boot and shows no os is installed or it gives bootloop.
If you are facing these problems then this tutorial help you to boot into Oreo rom successfully.
I know that there is no stable Oreo rom but people try to flash Oreo rom because it is new and having new features .
Firstly use ressurection remix Oreo rom because it is more stable then linage os also it hase endless customisation.
Always use latest twrp for flashing roms ( all links are given at bottom).
So,let's go
1.Firstly boot to your current installed twrp and flash the given twrp.
2.Boot to new recovery and wipe except internal storage I prefer clean install because it does not give any errors.
3.Flash the RR Oreo rom if it shows error again wipe and boot into recovery it does not show any error wait for the installation.
4.Flash latest Gapps nano&picco(arm64) I prefer nano
5.This part is important flash magisk or super su as your wish for root permission.
6.This is the most important part don't boot because we need to path the boot.flash the boot image when you flash the image it shows many options like nvram,recovery etc. choose boot and flash the image .
7.Now boot to system you don't see any error like is is not installed or bootloop.
NOTE:- the boot image I only tried in ressurection remix so try in another roms I don't now it will work or not.
I did not take any responsibility if your phones completely dead,blast or anything.
Please take full nandriod backup into twrp of anything goes wrong.
Download links
This is my second post so I can't add links go
G I z d e v,here you find official and unofficial supported devices find k3 note and download all the required files .
Note- all files are one place for easy downloading
Please comment below if you successful boot.
Inside download link microg and viper4andriod is also avalible if you like to use then download.
If you don't now rooting or flashing roms please don't waste your time
If you fail to boot don't blame me
IF DOWNLOAD LINK NOT WORK OR NOT PRESENT PLEASE SEE THE COMMENT SECTION I WILL GIVE OT.
THANKS FOR YOUR SUPPORT
Credit
g i z d e v developers
Afleckcrimson
Click to expand...
Click to collapse
Download link?
No download link?
Heamnath said:
Download link?
Click to expand...
Click to collapse
Where can I find download link?
Were can i find the download link?
Utimate Q Rom
lots of under the hood tweaks great battery based off stock very debloated same as A20 A30 A40 and A50 now Ultimate Q for A10
Rom Download https://www.androidfilehost.com/?fid=4349826312261802134
Ultimate Q download https://www.androidfilehost.com/?fid=4349826312261811703 this is latest
Telegram https://t.me/ultimate_Pie2
Stock kernel from firmeare
Hi, how to setup or install ultimate Q rom in A10 device.
Thank you...
Shomu11 said:
Hi, how to setup or install ultimate Q rom in A10 device.
Thank you...
Click to expand...
Click to collapse
Come to telegram can help better from there
we load gapps yes or not ?
findukv22 said:
we load gapps yes or not ?
Click to expand...
Click to collapse
No
Does it have any bug, is it necesary to have Stock Q installed before Flashing this one?
How Long does the Rom take to boot up on the first boot?
Hi when does the rom boot into the OOBE setup
Betrayal92 said:
Does it have any bug, is it necesary to have Stock Q installed before Flashing this one?
Click to expand...
Click to collapse
I would yes
EdwardTCM said:
Hi when does the rom boot into the OOBE setup
Click to expand...
Click to collapse
Come to telegram link is in post 1 can help better from there
Can you ppst the full instructions on how to install this please
I've successfully installed this on a Samsung Galaxy A10 model SM-A105F. Here's the simple explanation how I did it:
1. Used Freija to download stock firmware in case of brickada or loopery.
2. Unlocked bootloader.
3. Used Odin to flash the file vbmeta_disabled.tar to USERDATA to prevent Android Verified boot.
4. Installed custom recovery TWRP 3.4.
5. Wiped System, Data, Cache, Dalvik.
6. Installed Ultimate Q zip through recovery.
7. Installed Magisk Manager 20.4 zip through recovery.
8. Installed Samsung multidisabler through recovery.
9. Factory Reset wipe through recovery.
10. Reboot & enjoy.
Each of these steps are explained in detail elsewhere in guides, and if this is your first time it may seem complicated but this is more or less how it's done.
Thank for the rom..master, its great rom.
Some day, i want stock rom back but i dont have'nt keep it. And now i find in this thread..good job master
Hello, I am having some trouble finding the "allow usb debugging from this computer" pop-up. Could anyone please help me with it, i think the problem was related to the rom. Any help would be appreciated. Thanks.