I got a brand new Samsung Tab E 9.6" (SM-T560). Shame on me, I didn't notice before it comes with Android 4.4.4
As many apps require newer OS, I'm wondering if I can upgrade it to Android 6.0.
Plase note:
1. I'm not an expert, so please explain me as easy as possible how to do it, if it can be done;
2. please tell me, in case,if it's 100% legal and/or if it can void warrant.
Thank you.
Samsung Tab E
Check again --- Just picked up the same thing this week at Walmart for $129.00 + $25 Google Play credits - it came with 7.1.1. - Take it back sounds like you got some real old stock..
They do come with Android 4.4, however if you go to Samsungs web page you can find a crispy 7.1.1 image you can flash with Odin. Then if you wish you can unlock bootloader and flash a custom recovery like CWM or TWRP and then chainfires systemless root. Cheers! Upgrading to just 7.1.1 with Odin will not void your warranty, anything else that involves unlocking the bootloader will and is will trip samsungs knox security feature. If warranty is important only flash the 7.1.1 image using Odin.
Hello,
I'm searching forsuch an update, too. But It seems, that it was only released for USA and CA. But I'm from Germany. @xSLAYERx do you have a link to the ROM?
xSLAYERx said:
They do come with Android 4.4, however if you go to Samsungs web page you can find a crispy 7.1.1 image you can flash with Odin. Then if you wish you can unlock bootloader and flash a custom recovery like CWM or TWRP and then chainfires systemless root. Cheers! Upgrading to just 7.1.1 with Odin will not void your warranty, anything else that involves unlocking the bootloader will and is will trip samsungs knox security feature. If warranty is important only flash the 7.1.1 image using Odin.
Click to expand...
Click to collapse
heya, could you please share a link of this 7.1.1 with me? or the image itself, I can't find it anywhere and I'm stuck with 4.4.4
thank you!
hurkagyurka123 said:
heya, could you please share a link of this 7.1.1 with me? or the image itself, I can't find it anywhere and I'm stuck with 4.4.4
thank you!
Click to expand...
Click to collapse
Hi, I was with the same problem, and I posted here in XDA, I'm from Brazil, i have the model SM-T560, and now i'm using nougt, from Lineageos 14.1, and this was only possible, because someone from Xda, gave me the following link:
http://www.gearappsnap.com/2018/03/14/how-to-install-android-nougat-on-the-galaxy-tab-e-sm-t561/
The rom is of the SM-T561 model, but also works on the SM-T560, read everything before doing anything. When installing TWRP, you can install the version of the SM-t560, which will not make any difference.
One more thing, I advise you to see some YouTube tutorials how to install TWRP. Just in case.
Thank You for your help!
hurkagyurka123 said:
Thank You for your help!
Click to expand...
Click to collapse
For nothing, follow step by step that will work perfectly. Except this will end your warranty, but it's the only way to install an update. If you need any help, just talk.
gearappsnap site is not really good made.. The download links behind text which look like a normal one and also that it says, flash boot.img only when the memory is wrong..
Well, CM14.1 did not work for me.. I had to flash boot.img before EVERYTHING else, then rebooted again to TWRP and THEN install cm14.1.
Um, did you follow step by step?
I followed what was written, and for me it worked normal, The boot.img file is to fit just the memory of the table because it had some problem with the rom, without installing it, has tablet that got locked in infinite loop. And the links were working normal for me.
Links that i download:
ROM: https://drive.google.com/file/d/1D0wrGM4XyZMo-t3ll4trvJ93Pl1KEZ1V/view
Boot.img: https://drive.google.com/file/d/1bqGmu4NTlEeKdsFPGjIY9lnPqujjazr4/view
softkeys: https://drive.google.com/file/d/1ddSB28g1xTd0J7sl8V6QmlPZA1aX77ot/view
Gaps: https://opengapps.org/
First the TWRP is installed, with the battery above 70%, then restarts the tablet.
Within the TWRP:
1) Wibe-> advanced wibe-> selects almost anything but not microSD and OTC. and Wibe.
2) Back to the home page-> Install-> select the external storage (the files must be saved on the SD card).
3) The first file to be installed is the rom.
4) Once installed, go back to the files and at the bottom of the page you will click install image and install boot.img.
5) After Boot.img is installed, switch back to Install Zip, and Install the Softkeys.
6) After installing the softkeys go back and install the Gaps. (I used the ARM-7.1-Pico) and restart the tablet.
In my case I did not install superSU. That's what I did. This rom has some flaws but better than Kitkat, that's what I think.
thE_29 said:
gearappsnap site is not really good made.. The download links behind text which look like a normal one and also that it says, flash boot.img only when the memory is wrong..
Well, CM14.1 did not work for me.. I had to flash boot.img before EVERYTHING else, then rebooted again to TWRP and THEN install cm14.1.
Click to expand...
Click to collapse
HEY!
download this: https://mega.nz/#!yEpjCITA!9EA101hYDOajDwmBHKxSZhv3QkV-RI61MkLn0JYNRZY
unzip and install and follow steps.
1-install TWRP 3.0.2-1 via odin
2- copy ALL files of .zip in one folder in storage (mem stick)
3- power off and then power on IN TWRP (vol + + home + power button)
4- make full wipes except externar storage
5- install zip (first choice lineage -14, then choice open gapps, next choice key.zip)
6- install img (choice boot.img)
7- WIPE (Dalvik, cache)
enjoy android 7.1 in your tab e T560
63or63 said:
HEY!
download this: https://mega.nz/#!yEpjCITA!9EA101hYDOajDwmBHKxSZhv3QkV-RI61MkLn0JYNRZY
unzip and install and follow steps.
1-install TWRP 3.0.2-1 via odin
2- copy ALL files of .zip in one folder in storage (mem stick)
3- power off and then power on IN TWRP (vol + + home + power button)
4- make full wipes except externar storage
5- install zip (first choice lineage -14, then choice open gapps, next choice key.zip)
6- install img (choice boot.img)
7- WIPE (Dalvik, cache)
enjoy android 7.1 in your tab e T560
Click to expand...
Click to collapse
In reality you have to install boot.img and softkeys before, the reason is because they are modified for the T56X, otherwise install themselves after the gaps will give error when to use. At least it is what was written on the site, and so far I have been using no defect at all.
marcelo010 said:
In reality you have to install boot.img and softkeys before, the reason is because they are modified for the T56X, otherwise install themselves after the gaps will give error when to use. At least it is what was written on the site, and so far I have been using no defect at all.
Click to expand...
Click to collapse
I do not think that is effective. if you come from 4.4.4 and install it before the lineage ROM (BASE 7.1 for example) it will be erased again because with the new base everything is overwritten.
63or63 said:
I do not think that is effective. if you come from 4.4.4 and install it before the lineage ROM (BASE 7.1 for example) it will be erased again because with the new base everything is overwritten.
Click to expand...
Click to collapse
Well that didnt work for me.. Was coming from Stock 4.4 ROM. Flashed the CM14.1 AND softkeys, but NOT the boot.img, because you cannot flash zip and img files at the same time. Then I booted it and it crashed 10-60secs after it booted. Sometimes it had a boot loop.
Then I tried CM 13 which worked fine and in a german board, someone wrote (based on the gearappsnap site) that the boot.img has to be the first thing to flash and even reboot into twrp again and then flash CM14.1 + softkeys + gapps.
If you could install it, that's what matters, in my case it worked the way it was on the site, there are some bug's, but it's a lot better than the stock rom, and I was already using a custom rom on the T560 before installing this LineageOS 14.1,and it was this link:
https://forum.xda-developers.com/galaxy-tab-e/development/rom-lightning-t3716039
Szia!
did the upgrade work for You For galaxy tab e?
Done this and it worked but.........
The tablet is really slow, not netflix compatible with this version, and so on....
I think I just might downgrade again
After I have tried step 3, it didnt open in twrp mode. My tab stucks in black screen with "Samsung galaxt tab e " text in background.Please let me know how to proceed.
[QUOTE = "63or63, Post: 78613279, Mitglied: 4438103"]
HI THERE!
Download this: https://mega.nz/#!yEpjCITA!9EA101hYDOajDwmBHKxSZhv3QkV-RI61MkLn0JYNRZY
unzip and install and follow the steps.
1-install TWRP 3.0.2-1 through odin
2- Copy ALL .zip files to a folder in memory (mem stick).
3- turn off and then turn on IN TWRP (vol + + home + power button)
4- Make full towels except for external storage
5- install zip (first choice line -14, then select open gaps, next choice key.zip)
6- install img (choose boot.img)
7- WIPE (Dalvik, Cache)
enjoy Android 7.1 in your Tab e T560
[/ZITAT]
1000 tanks BR
.
1000 x danke es hat funktioniert
Translation: 1000 x thank you it worked
Related
Method 1
Download KDZ: HERE
LG Driver: HERE
LG Flash Tool: HERE
1. Download Mode
You must switch off the device to start the process.
Then press and hold the “Volume Up” and connect the USB cable from phone to PC.
Use the original USB cable. Because, other device’s cable may not be detected in the Computer. So, only we recommend it to use the original one that you got it when you bought the phone.
Wait for the driver installation on PC.
Then you will get the download mode screen in your phone.
That’s it.
You can return to the normal mode by press and hold power button.
Don’t unplug the cable while the update process is running. Because, it will damage your phone.
2. Downgrade using KDZ Method: HERE
3. Root (PurpleDrake): HERE
4. BUMP:
Download TWRP 2.8.4.0: HERE
Flash it with Flashify : Tutorial
5. You are ready for CM12!
CM12: HERE
GApps: HERE
[Optional] SuperSU: HERE
Method 2 (thanks to ziggyboy)
If you want to do this really quickly, copy the following APK's before you flash the KK ROM to your SD card:
Stump
SuperSU
Flashify
TWRP
Latest CM12
GApps for LP
This saves you from having to download or copy the APK within the process.
Here's a detailed guide:
Copy the APK's listed above to your SD card.
Flash 10A-10D using the guide linked by the OP.
When setting up KK, just skip everything. No need to connect to wifi, 3G, or your PC.
Install the Stump APK from your SD card. Run it to root your device. You'll likely reboot.
Install the SuperSU APK from your SD card.
Install the Flashify APK from your SD card. Run it to flash TWRP. Make sure you select the 'recovery image 'option.
The installation process should reboot you to TWRP.
In TWRP: Wipe then flash CM12 and GApps.
Reboot and set up CM12!!
Does SuperSU not included in the CM12 official ROM ? I remember that it's embedded inside the ROM.
I flashed SuperSU because probably Superuser app isn't present as I think it got merged with Privacy Guard together but I can assure you an applet when an app requests SU permission is present but first you have to activate it in developers option. I think you can skip flashing it.
Sent from my LG-D855
Howcome I often see the 16 GB version of EUR and not the 32 GB?
I've got a 32GB version of EUR. Maybe because in europe 32gb version is lot more expensive of 16gb.
i_am_Flux said:
I've got a 32GB version of EUR. Maybe because in europe 32gb version is lot more expensive of 16gb.
Click to expand...
Click to collapse
The Bumped Recovery you link to in the OP is extremely old - this is the latest version and it is strongly suggested that you use this one instead:
Latest Bumped TWRP
LenAsh said:
The Bumped Recovery you link to in the OP is extremely old - this is the latest version and it is strongly suggested that you use this one instead:
Latest Bumped TWRP
Click to expand...
Click to collapse
Yea, you're right. I put the links of all the guides i'd followed so I'm 100% sure that's working. Thank you for the update.
I've got a slightly easier method (IMO) of doing this. Here's a summary. Detailed steps later on.
Flash an earlier ROM, preferably 10A-10D. Don't forget to wipe.
Use Stump to root (it's so much quicker and you can do it from your phone). See http://forum.xda-developers.com/lg-g3/orig-development/root-stump-root-lg-g3-sprint-verizon-t2850906
Install Flashify and use it to flash TWRP.
Reboot to TWRP, wipe and flash CM12 + GApps.
If you want to do this really quickly, copy the following APK's before you flash the KK ROM to your SD card:
Stump
SuperSU
Flashify
TWRP
Latest CM12
GApps for LP
This saves you from having to download or copy the APK within the process.
Here's a detailed guide:
Copy the APK's listed above to your SD card.
Flash 10A-10D using the guide linked by the OP.
When setting up KK, just skip everything. No need to connect to wifi, 3G, or your PC.
Install the Stump APK from your SD card. Run it to root your device. You'll likely reboot.
Install the SuperSU APK from your SD card.
Install the Flashify APK from your SD card. Run it to flash TWRP. Make sure you select the 'recovery image 'option.
The installation process should reboot you to TWRP.
In TWRP: Wipe then flash CM12 and GApps.
Reboot and set up CM12!!
I live in Spain, I guess this is the correct firmware for me, right?: 42 6UA/EUROPE COMMON_16G V10A
Hi GFXi0N, it's not important where the kdz was released. Flash any KK KDZ (in your case all 16GB version KDZ) then root and bump it.
Thanks Ziggyboy for the guide. Yea is slightly easier, I will update the thread and add yours
Awesome guide, thanks to both of ya (OP and the super-quick guide) =)
hammerholm said:
Awesome guide, thanks to both of ya (OP and the super-quick guide) =)
Click to expand...
Click to collapse
You're welcome, new TWRP released. Flash it with Flashify
hi,
»In TWRP: Wipe then flash CM12 and GApps»
wipe what exactly?
tks in advance
eddumota said:
hi,
»In TWRP: Wipe then flash CM12 and GApps»
wipe what exactly?
tks in advance
Click to expand...
Click to collapse
Full Wipe/Clean Flash/Clean Install [same].
When you change from one ROM type to another [from KK to Lollipop or even from the same variant but from different Developers/types of ROMS] always do the above term mentioned.
In TWRP go to wipe>advanced wipe. Then mark Cache, Dalvik Cache, Data and System.
Wipe.
Flash the ROM [don't reboot].
Flash Gapps.
Wipe Cache and Dalvik Cache after Gapps [recommended].
Reboot and enjoy!
This is what I do and never have a problem.
is it possible to flash a normal 5.0 rom ? i don't like the CM12
What do you mean by "normal" 5.0 ROM?
If you mean something like the Nexus 6 ROM the answer is no. CM12 is probably the closest you'll get to pure Android Lollipop.
Fck miekroesoft
I been googling whole day and I cant find even one guide for Linux. I would love to downgrade my lg g3 d855 to kitkat and then upgrade to lollipop 5.1.1 but I DON'T want to install freaking windows to do it.
Hello Guys,
At first a little background story:
I bought the Tablet 3 Month ago. I have got the Update to Android 6.0 in January and unfortunately, I applied it.
So If you don't want to apply a custom rom do not update to 6.0, because 5.1.1 is much better.
I am not responsible if anything goes wrong.
Ok, so let's get started:
At first you must install Minimal ADB and Fastboot on your PC/Laptop/Mac.
Windows: https://forum.xda-developers.com/showthread.php?t=2588979
Linux/Mac: http://rootmygalaxy.net/install-adb-and-fastboot-on-mac-or-linux/
Here is the link for all OSs: http://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378
Before you can Root or flash a Custom Rom you must flash the recovery:
You will need:
-Nvidia Family Drivers(Extract it in a folder of your choice): http://nvidiashieldzone.com/files/shieldtv/shieldfamilydriver.zip not working anymore, official link:
http://developer.download.nvidia.com/mobile/shield/SHIELD_Family_WHQL_USB_driver_201801.zip
-As many of you are experiencing problems with my previously mentioned TWRP 2.8.7.3 version I am replacing the link with the official TWRP Shield Tablet Download Site. Just take the newest stable version: https://dl.twrp.me/shieldtablet/ (Put the file into the ADB+Fastboot Folder)
-TWRP 2.8.7.3 Recovery(Put the file into the ADB+Fastboot Folder): Download URL: https://www.androidfilehost.com/?fid=24269982087009777
Developer Post: http://forum.xda-developers.com/shi...recovery-twrp-2-8-7-0-touch-recovery-t3257172
Install the Drivers
Connect your Tablet to your PC
Windows:
Open your Device Manager
If there Is a device with a yellow ! klick on it and update the Drivers Manually(select the Folder where you extracted the Family Divers)
Linux:
You don't need any drivers
(For every fastboot command in ADB+Fastboot you will need a "sudo" in front of it...)
Mac:
You also don't need any drivers
(For every fastboot command in ADB+Fastboot you will need a "./" in front of it...)
Flash Recovery
1. Open Minimal ADB and Fastboot
2. Type in
Code:
adb devices
if you get a long term of numbers and letters your drivers are correctly installed, If this command does not bring up a device, check your cable connection and/or update your drivers again.
3. Now you must enable developer options on your SHIELD Tablet K1
3.1 Go to your Setting, scroll all the way down and choose Info(or similar)
3.2 Tap seven times on the Build Number
3.3 Now go back and now there is a new menu point Developer Options
3.4 Open them and Enable USB Debugging
4. Now type
Code:
adb reboot bootloader
EDIT: 4.1 To enable the fastboot protocol, you must select "Fastboot mode" on the Tablet. After that type
Code:
fastboot devices
in order to check if fastboot is enabled.
5. Before you can do anything you must unlock the Bootloader
5.1 Type in
Code:
fastboot oem unlock
5.2 Follow the Instructions on the Terminal(On your tablet: press the volume down button and then the power button)
6. Now you are ready to flash the recovery
6.1 Type in
Code:
fastboot flash recovery twrp-x.x.x-x-shieldtablet.img
6.2 Wait until it is finished then navigate with the volume buttons through the Menu on your Tablet and choose the option recovery mod with you power button
7. You are now in a custom Recovery on this point you must decide what you want to do:
-Do you only want to root your Device
-Or do you want to install a custom rom
Custom Rom
If you want to be on the safe side you should consider wiping the /data partition (Troubleshoot section at the end of the Post)
1. You can access your tablet from your PC
2. Now move your Custom rom to your internal or SD Card Storage
2.1 Download your custom rom of your choice.
2.1.1 Cyanogenmod 12.1 (Android 5.1.1) and BlissPop v4.0.3 https://www.androidfilehost.com/?w=files&flid=150249
2.1.2 Cyanogenmod 13.0 (Android 6.0) https://androidfilehost.com/?w=files&flid=27600&sort_by=date&sort_dir=DESC
2.1.3 Nvidia Shield Tablet Resurrection ROM (Android 6.x) https://androidfilehost.com/?w=files&flid=60681&sort_by=date&sort_dir=DESC
2.1.4 BlissPop
2.2 Download Google Apps (Gapps) (ARM Device)
2.2.1 Android 5.1 http://opengapps.org/?api=5.1&variant=stock
2.2.2 Android 6.0 http://opengapps.org/?api=6.0&variant=nano
2.3 Download Nvidia Apps (You still need to install Nvidia Shield HUB from the Play Store)http://forum.xda-developers.com/shield-tablet/development/shield-apps-cyanogenmod-12-t3070116
3. In TWRP click on Backup and Swipe to Back Up
3.1 Now go to Wipe. For a dirty flash you will only need to wipe the Dalvik and Cache for a full wipe select Dalvik, System, Data, Cache
4. After it has finished Click on Install and choose the .zip of your Custom Rom
4.1 To install the Google Apps click on Add More Zips and select the GApps zip
4.2 And again click on Add More Zips and select nvsystemservices.zip
4.3 now you can Swipe to Confirm Flash
Root
Download the Latest Stabel SuperSU file: http://download.chainfire.eu/supersu-stable and copy it to the internal or SD Card Storage
For Android 7.0 (Nougat) the SuperSU r4 2.78 version is confirmed working.
1. Open Minimal ADB and Fastboot
2. Type in
Code:
adb reboot recovery
to enter the recovery mode
3. In TWRP click on Backup and Swipe to Back Up
4. After it has finished Click on Install and choose the UPDATE-SuperSU-v2.65-20151226141550.zip (or similar) and Swipe to Confirm Flash
5. Restart you Tablet and now a new App SuperSU is Installed
Xposed Framework
Download the Xposed Framework Zip file, take the newest version:
(The Shield Quad Core has a 32 bit arm architecture, so you need the framework for arm)
SDK21 for Android 5.0: http://dl-xda.xposed.info/framework/sdk21/arm/
SDK22 for Android 5.1: http://dl-xda.xposed.info/framework/sdk22/arm/
SDK23 for Android 6.0: http://dl-xda.xposed.info/framework/sdk23/arm/
and the apk: https://forum.xda-developers.com/attachment.php?attachmentid=3921508&d=1477916609
and move them to you Tablet.
Developer Thread (for the uninstaller): https://forum.xda-developers.com/showthread.php?t=3034811
Go to Recovery with Root
1. Now that you have root you don't need you PC anymore. Go to the Play store and download Quick Boot
2. Open Quick Boot and klick on Recovery
3. Allow Root rights and the Tablet should boot into recovery
Go to Recovery without Root
1. Shut down your Tablet
2. Press and hold the Vol down button and the Power button until the Bootloader screen appears
3. Navigate with the volume buttons through the Menu on your Tablet and choose the option recovery mod with you power button
Install Xposed Framework
1. In the TWRP Recovery (Optionally you can make a Backup) select Install and choose the xposed-v80-sdk22-arm.zip file
2. When you get an Error let me know
3. Now Restart you Tablet and install the .apk file normally
4. In the App Press Framework and now there should be a green writing saying: Xposed Framework version 80 is active
5. Here is a list of very useful programs for the Xposed Framework: http://forum.xda-developers.com/android/general/best-xposed-modules-android-t3103027
Please Leave a post if you are getting errors or something isn't clearly explained! And if I could help you, consider giving me a Thanks
Troubleshoot
If you are stuck in a Bootloop:
Without data loss(e.g. when you installed Xposed framework zip and its stuck in a bootloop)
1. flash the stock rom boot image BUT ONLY IF YOU DONT USE A CUSTOM ROM (it will probably loose root). go to https://developer.nvidia.com/gameworksdownload#?search=SHIELD Tablet K1&tx=$additional,shield and download the latest NVIDIA SHIELD Tablet K1 Recovery OS Image
2. Unpack the zip file and flash it to your Tablet
Code:
fastboot flash boot boot.img
If something went wrong while flashing a custom rom (after that you will need to flash the custom/stock rom again)
wipe the /data partition. It could be encrypted from the previous rom. Be aware that you need to reinstall the rom, therefore loose all your data. Troubleshot guide by agentbob123
-Toby
Credits:
@xsquid mac support
@agentbob123 suggestion to mention to wipe the /data partition as a solution for being stuck in a bootloop
@champs777 suggested the newest TWRP
@grävling mentioned importance of waiting until the recovery flash is finished
Toby9 said:
Hello Guys,
At first a litte background story:
I bought the Tablet 3 Month ago. I have got the Update to Android 6.0 in January and unfortunately i applied it.
So If you don't want to apply a custom rom do not update to 6.0, because 5.1.1 is much better.
Ok, so let's get started:
I am not responsible if anything goes wrong.
At first you must install Minimal ADB and Fastboot on your PC/Laptop/Mac.
Here is the link for all OSs: http://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378
Before you can Root or flash a Custom Rom you must flash the recovery:
You will need:
-Nvidia Family Drivers(Extract it in a folder of you choice): http://nvidiashieldzone.com/files/shieldtv/shieldfamilydriver.zip
-TWRP 2.8.7.3 Recovery(Put the file into the ADB+Fastboot Folder):
Download URL: https://www.androidfilehost.com/?fid=24269982087009777
Developer Post: http://forum.xda-developers.com/shi...recovery-twrp-2-8-7-0-touch-recovery-t3257172
Install the Drivers
Connect your Tablet to your PC
Windows:
Open your Device Manager
If there Is a device with a yellow ! klick on it and update the Drivers Manually(select the Folder where you extracted the Family Divers)
Linux:
You dont need any drivers
(For every fastboot command in ADB+Fastboot you will need a sudo in front of it...)
Mac:
2016/02/16 Please leave a post if you how to do this
1. Open Minimal ADB and Fastboot
2. Type in
Code:
adb devices
if you get a long term of numbers and letters your drivers are correctly installen, If this command does not bring up a device, check your cable connection and/or update your drivers again.
3. Now you must enable developer options on your SHIELD Tablet K1
3.1 Go to your Setting, scroll all the way down and choose Info(or similar)
3.2 Tap seven times on the Build Number
3.3 Now go back and now there is a new menu point Developer Options
3.4 Open them and Enable USB Debugging
4. Now type
Code:
adb reboot bootloader
5. Before you can do anyting you must unlock the Bootloader
5.1 Type in
Code:
fastboot oem unlock
5.2 Follow the Instructions on the Terminal(On your tablet: press the volume down button and then the power button)
6. No you are ready to flash the recovery
6.1 Type in
Code:
fastboot flash recovery twrp-2.8.7.3-shieldtablet.img
6.2 Wait until it is finished then move with the volume buttons through the Menu on your Tablet an choose the option recovery mod with you power button
7. You are now in a custom Recovery on this point you must decide what you want to do:
-Do you only want to root your Device
-Or do you want to install a cutom rom
Custom Rom
1. You can access your tablet on your pc
2. Now move your Custom rom to your internal or SD Card Storage
2.1 Download your custom rom of your choice. I decided to use Cyanogenmod 12.1 (Android 5.1.1) http://forum.xda-developers.com/shi...-cyanogenmod-12-shield-tablet-lte-na-t3055043
2.2 Download Google Apps (Gapps) (ARM Device) http://opengapps.org/?api=5.1&variant=stock
2.3 Download Nvidia Apps (You still need to install Nvidia Shield HUB from the Play Store)http://forum.xda-developers.com/shield-tablet/development/shield-apps-cyanogenmod-12-t3070116
3. In TWRP click on Backup and Swipe to Back Up
4. After it has finished Click on Install and choose the .zip of your Custom Rom
4.1 To install the Google Apps click on Add More Zips an select the GApps zip
4.2 And again click on Add More Zips and select nvsystemservices.zip
4.3 now you can Swipe to Confirm Flash
Root
Download the Latest Stabel SuperSU file: http://download.chainfire.eu/supersu-stable and copy it to the internal or SD Card Storage
1. Open Minimal ADB and Fastboot
2. Type in
Code:
adb reboot recovery
to enter the recovery mode
3. In TWRP click on Backup and Swipe to Back Up
4. After it has finished Click on Install and choose the UPDATE-SuperSU-v2.65-20151226141550.zip (or similar) and Swipe to Confirm Flash
5. Restart you Tablet and now a new App SuperSU is Installen
Please Leave a post if you are getting errors or someting isn't clearly explaned!
-Toby
Click to expand...
Click to collapse
My tablet just keeps rebooting to the lock screen whenever I try to go to recovery mode... Somehow twrp doesn't stick... It did when I was on Lollipop. I have already tried to flash the recovery, do a full reboot before trying to get in twrp but without success.
On mac
You dont need any drivers
(For every fastboot command in ADB+Fastboot you will need a ./ in front of it...)
example being ./fastboot oem unlock
xsquid said:
On mac
You dont need any drivers
(For every fastboot command in ADB+Fastboot you will need a ./ in front of it...)
example being ./fastboot oem unlock
Click to expand...
Click to collapse
Thank you I added this in guide
nielsscholte said:
My tablet just keeps rebooting to the lock screen whenever I try to go to recovery mode... Somehow twrp doesn't stick... It did when I was on Lollipop. I have already tried to flash the recovery, do a full reboot before trying to get in twrp but without success.
Click to expand...
Click to collapse
Try other TWRP versions like 2.8.7.0 or 2.8.7.1 i think the 3.0.0.0 is for Andoid 6.0 devices so if you are currently in the newest version of the Android OS try this one out
The 3.0 versionof TWRP was unstabel on my device so you should flash it wipe the storage and flash one of the older ones
nielsscholte said:
My tablet just keeps rebooting to the lock screen whenever I try to go to recovery mode... Somehow twrp doesn't stick... It did when I was on Lollipop. I have already tried to flash the recovery, do a full reboot before trying to get in twrp but without success.
Click to expand...
Click to collapse
3.0.0.0 wasn't out yet when I did mine but it was doing the same thing and this worked perfectly:
fards said:
Try deleting recoveryonboot.p in /system
Click to expand...
Click to collapse
Credit to fards.
xsquid said:
3.0.0.0 wasn't out yet when I did mine but it was doing the same thing and this worked perfectly:
Credit to fards.
Click to expand...
Click to collapse
How can I remove this file without root ?
SonicDBZFan07 said:
How can I remove this file without root ?
Click to expand...
Click to collapse
Try your normal command line for flashing recovery except change flash to boot. It doesn't flash it, just boots to it.
In other words, if you are using:
1. Fastboot Flash recovery recoveryname.img
Do instead:
2. Fastboot boot recovery recoveryname.img
While in recovery (make sure the supersu zip is on the sd card or wherever you normally flash files from first) flash supersu. You should now be rooted but without a recovery.
Go then to delete the file and then reboot, flash the recovery as normal (#1), reboot and then it should be good to go. It was for me.
rooted device no need to unlock bootloader it will unlock for ittself
just go to playstore and dowload twrp manager
choose the name of your device
and choose one of the two versions available
for shield tablet the version 3.0.0.0 doesnt work well it spilts the screen but wthe other version Works great
the link is twrpmanager on play.google
this way you dont need to connect your tablet to your pc
Great work!
Thank you for the awesome guide. Besides deleting the TegraOTA apk, is there any other app/service that I should disable to prevent OTA updates?
Followed the guide after screwing my device up with official firmware. Thanks for nothing Nvidia, why are you offering OTA that cause the device to stop working correctly.
Nothing happened other than appearing to boot itself to the "powered by android" (kernel) screen over and over.
Held down power + volume UP ...
And it factory reset itself.
Somehow.
Did I mention that Nvidia is a terrible company?
Edit: Fixed using TWRP v3.0.0 - this guide should be updated to reflect this particuarly as people who screw their device up after trusting Nvidia OTA MM will be using it.
diji1 said:
Followed the guide after screwing my device up with official firmware. Thanks for nothing Nvidia, why are you offering OTA that cause the device to stop working correctly.
Nothing happened other than appearing to boot itself to the "powered by android" (kernel) screen over and over.
Held down power + volume UP ...
And it factory reset itself.
Somehow.
Did I mention that Nvidia is a terrible company?
Edit: Fixed using TWRP v3.0.0 - this guide should be updated to reflect this particuarly as people who screw their device up after trusting Nvidia OTA MM will be using it.
Click to expand...
Click to collapse
I'm sorry that you had that problem but this guide is a general guide and not an screw nvidia (besides they are awesom giving us a really good tablet for 200 Buck, but jea?) guide. TWRP v3.0.0 has his bugs so generally when you have finished deleting the stock rom you should flash TWRP 2.8.7.3 works the most stabel.
Trafalgar Square said:
Great work!
Click to expand...
Click to collapse
Thanks, i appreciate that
Add TWRP to M image (Shield 1.1)
Folks,
Just received Nvidia Shield K1 and OTA immediately upgraded it to M (Shield 1.1) and I unlocked bootloader no problem. However when I go to flash or temp boot twrp 2.x or 3.x it flashes OK, but when I reboot (either via fastboot or hard off/start to recovery manually) it appears it is overwriting the recovery partition and it just boots normally.
Is there a limitation to flashing twrp bootloader in M, and do I have to downgrade to L to flash recovery partition?
I seem to be happy w/ stock (limited stick time), I just want to root at this point and install my favs. Once I get this running will supersu pro preserve root, or do I need to turn off nvidia OTA process.
Also I see optimization for chrome, does this do anything X1 optimizations)?
Thanks
psychic99 said:
Folks,
Just received Nvidia Shield K1 and OTA immediately upgraded it to M (Shield 1.1) and I unlocked bootloader no problem. However when I go to flash or temp boot twrp 2.x or 3.x it flashes OK, but when I reboot (either via fastboot or hard off/start to recovery manually) it appears it is overwriting the recovery partition and it just boots normally.
Is there a limitation to flashing twrp bootloader in M, and do I have to downgrade to L to flash recovery partition?
I seem to be happy w/ stock (limited stick time), I just want to root at this point and install my favs. Once I get this running will supersu pro preserve root, or do I need to turn off nvidia OTA process.
Also I see optimization for chrome, does this do anything X1 optimizations)?
Thanks
Click to expand...
Click to collapse
After you flash twrp reboot to recovery. I may be wrong, but I think the stock ROM overwrites the custom recovery at reboot. If you reboot to twrp first after flash, twrp will disable this.
Sent from my SHIELD Tablet K1 using Tapatalk
Rooting
Hi everyone,
Yesterday got my new Nvidia Shield Tegra K1 and upon using it I noticed it's a great tablet for it's price range and will do my job easier while flying my Phantom 4. To be honest it's seems very stable and solid but was thinking about rooting it. I have some questions regarding the process wince I haven't rooted anything since my HTC Fire, log time ago that was. What are the benefits of rooting this device ? Will I still be able to update the Shield with its official updates ? Will I be able to roll back to an unrooted tablet should I need too ? I wasn't planning on flashing a custom rom but if I'll do what are the pros and cons of doing so ? I know that maybe searching this forum I would find all the answers needed but since there is so much information and threads I'm lost as from were to start from.
Would be nice to guide me about how to properly root my device with all the necessary links. My tab is running on Android 6.0.
I thank you so much guys for the hard work you all do in providing such information. I know it takes a lot of time and patience.
I just got a Shield K1. I like it a lot but I wanted to root it. Then I saw how confusing it is to distinguish between it and the previous model. My guess is whatever is out there that says Shield Tablet means the old one not the K1. I also updated mine to MM cause I'm using and 128GB micro sd card for internal storage. I guess I'll just have to wait until more support comes out for this tablet such as a stable TWRP 3.0 Recovery and the ability to gain root access and custom ROMs like CM 13.
do you recommed to install all OTAs before install custom recovery and custom roms or is it better to install twrp-2.8.7.1 out of the box and then go for the custom stuff ?
I would install all updates to get the latest bootloader. Do not install twrp 2.8.7.1. Install the official 3.0.x from the official site.
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Brilliant! Thank you so much! Do you know any custom ROM what is better than the factory ROM?
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Adreno306™ said:
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Click to expand...
Click to collapse
Do you think it's easier/possible to adapt a ROM from a similar device like say, the Alcatel
Pop 2 (5) Premium ? I don't know if there's any ROM for that phone tho, but since it's branded as Alcatel you might get more support from the community here than by using Vodafone's name.
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Adreno306™ said:
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Click to expand...
Click to collapse
Hey, Andreno306
I don't know much about Rom's in that level of expertise I'm afraid :/ but I did some digging and came across this simple tutorial on XDA:
http://forum.xda-developers.com/showthread.php?t=2387941
I imagine it does not work for every single device out there, at least not with modifying stuff after, but it might be a good starting point I think, in fact I would try to actually make one myself had I a working PC currently at home. But even if I did I had no way of testing it because this is currently my daily driver phone.
Just wanted to say that I'm also very interested in getting a slim ROM for this device. I can't offer any expertise I'm afraid! Just wanted to show that there are people interested in your project.
:highfive:
Stock Kernel
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
vojta_horanek said:
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
Click to expand...
Click to collapse
I have one
https://mega.nz/#!tMJD3B4T!f6m2ELYCVupqGCcN2aGbkrNzEqijLu7au-7usEfeVL0
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Demonlord6 said:
I have one
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Click to expand...
Click to collapse
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
vojta_horanek said:
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
Click to expand...
Click to collapse
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Demonlord6 said:
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Click to expand...
Click to collapse
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
vojta_horanek said:
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
Click to expand...
Click to collapse
Yeap, that's not the same version as my ROM, mine is not 130FNN etc. Maybe that's why it didn't work
Enviado do meu GT-S5280 através de Tapatalk
Sorry for the stupid question but... does it works on Smart Prime 7 too?
Has anyone installed that linked ROM? It seems to be what we are looking for... a slim debloated rom.
I presume we need to be rooted, install this TWRP, then flash that ROM?
It mentions unlocking the bootloader, I dont think I've seen any info anywhere about unlocking the bootloader.
Can anyone give a quick lowdown on all the steps required to install that ROM please?
Hi everyone, I discovered that Elephone Trunk and Smart Prime 6 have (almost) identical specs: https://www.devicespecifications.com...ison/c584481c6
So it would be great to "port" (or build ?) the official Nougat-OmniROM for Trunk to VF-895N: http://dl.omnirom.org/trunk/
Last but not least, here's official Vodafone Smart Prime 6 sources: Vodafone_Smart_prime_6_20150413.tar.xz
TWRP for vodafone smart max 4 990N (coolpad 8890u).
I tried this recovery image for vodafone smart max 4 990N (coolpad 8890u).
The phone is in a bootloop state. I think i have usb debugging enabled already.
So, in fastboot mode i can see the device in my pc in adb fastboot cmd.
Im trying to ''fastboot boot recovery.img" but it stops in ''booting..''.
Dont know whats the problem but for sure i can not find a specific twrp image for this device.
If i enter fastboot oem device-info it says ''(bootloader) Device unlocked: true''.
Any ideas ?
hi i was wondering if you could share how you did this or if you can make one for the Vodafone smart n9 (VFD720) it would help a lot of people out looking for this
Needed to root a Vodafone Smart Prime 6 (VF 895N) (got it from a friend because it became unresponsive from all the updated google play stuff ) to get linux-deploy running. Just wanted to leave a big thank you here for Adreno306 for his TRWP 3.0.0-0. it did the job very well!
Only the procedure to get it installed differed quite a bit for me, since Flashify is no longer available.
I wanted to preserve boot and just flash trwp to recover, what worked quite well.
The first thing I did was to boot the phone manually in recovery mode (Power+Vol up) and reset it to factory settings from there. It takes a little while. Then follow the setup, go to phone settings, enable developer mode and set usb debugging. If "unlock oem" is not available there, reboot into recovery again, set unlock there and reboot into bootloader.
The prerequisites are adb and fastboot, both must work. Means adb devices and fastboot devices must show the phone. What can make problems under win10 as it sometimes does not detect the phone in bootloader mode. An actual google usb driver is needed, as provided by google.
For me adb worked well, but when rebooted into bootloader with adb reboot bootloader, fastboot didnt detect the phone. With the phone still connected, the windows device manager showed an unknown device with and exclamation mark (!). Right click, install driver, select driver manually, select driver from device list, mark all devices (first entry) and click "disk", then point to the usb driver director and select "ADB fastboot driver". ( A more comprehensive description is available here )
Once adb and fastboot detect the device, it is time to prepare it. Boot to system (normal operation) first. Make sure that the TRWP 3.0.0-0.img is renamed to trwp.img and then
adb reboot bootloader
fastboot devices
fastboot oem unlock
fastboot boot trwp.img
Now the phone should show the trwp menu, set it up to root the phone and install SuperSU. Reboot into bootloader and
fastboot flash recovery trwp.img
fastboot reboot
Verify with adb reboot recovery, you should see trwp now. Reboot to system.
Now finally go into the app selector, start SuperSU, and root the phone. SuperSu uses trwp recovery mode to install its image and root is done.
Again, big thanks for providing the TRWP image!
Adreno306™ said:
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Click to expand...
Click to collapse
Hi, I would like to try your tutorial but I can't root this phone (which is an important step in the tutorial), is there any way someone could help me??
Thanks
We have the first port and root for this highly unpopular BLU phone.
BLU DASH M 2 - Carliv Touch Recovery 6.6.1 aka CTRI have managed to replace the stock recovery and still keep the stock system since there are no customs roms at the moment. The recovery doesn't require you to be rooted but rooting is possible after flashing or booting this rom. Don't fall for the fake Dash files on youtube, I have downloaded them all and they are copies of similar phones and don't work.. This one is ported over from the D070Q by Carliv.
It will not flash a full custom rom but will flash ZIPs so you can root, recover, flash partitions and hopefully pave the way for a TWRP . I do have a TWRP ported over to the BLU Dash M 2 but the touch doesn't work so you can't pass the first swipe screen.
DOWNLOAD from uploadfiles.io @ https://ufile.io/8oc6k
Instructions
- Make sure to backup any important files, this will wipe your data pics, vids, etc..
- Enable OEM unlock under developer options and power down phone
- Boot to stock recovery by holding PWR + VOL UP
- In recovery choose "Reboot to Bootloader" ( aka fastboot )
- You should now be at a blank screen with Fastboot mode: at the bottom
Open your terminal and type the following code, obviously replacing your paths with the correct ones.
fasboot devices < --- will return a serial number or something to indicate connection is OK
fastboot oem unlock <--- will prompt your phone screen to accept unlock request, chose VOL Up to accept and make sure it says "Unlock pass" at the bottom
For testing only
fastboot -c "lge.kcal=0|0|0|x" boot CTR_6.6.1_BLU_DASH_M2_D090U.img
For permanent flash
fastboot flash recovery CTR_6.6.1_BLU_DASH_M2_D090U.img
Don't power down, instead boot in the same recovery
fastboot -c "lge.kcal=0|0|0|x" boot CTR_6.6.1_BLU_DASH_M2_D090U.img
Inside CTR select Wipe cache, Dalvik cache, Userdata / Data.
Select Reboot Phone from CTR menu and when asked to patch , Select " NO "
On first reboot it will reboot twice, then boot the stock system as if it was a factory reset.
This now paves the way for root with Magisk. See my post after this for rooting Blu Dash M2.
Enjoy !
RESERVED
Hey Thank you, got it working. Had to alter it a bit though. Had to select "Yes" for the fix as mine was restoring the old recovery.
Also when I followed your method, the system was not mounting the internal storage.
So I didn't wipe the data and used "Yes" when rebooting and the recovery is good.
I'll be looking out for the root constructions.
Great tutorial though.
73Hn said:
Hey Thank you, got it working. Had to alter it a bit though. Had to select "Yes" for the fix as mine was restoring the old recovery.
Also when I followed your method, the system was not mounting the internal storage.
So I didn't wipe the data and used "Yes" when rebooting and the recovery is good.
I'll be looking out for the root constructions.
Great tutorial though.
Click to expand...
Click to collapse
That will not work for root because Magisk needs the original boot rom. I'm sure it worked for you and that's a good start but wiping the partitions in order does work as well, I probably just left something out or got the order wrong. It's important we don't use CTR to patch because then Magisk complains about boot img being aleady patched and doesn't work.
Anyway you get the idea, it took me a few tries as well but in the end I managed to keep all 3 features intact, the stock rom + CTR + root. If you need to start again you don't need the full rom or sp flash, just flashing system.img to sytem partition works to restore everything.
I'm hoping to find the source code to the kernel and make a TWRP with touch working but the CTR is the only thing we have so far. It does flash zips just not full operating systems. It also flashes boot and recovery partitions.
Thanks, I can restore and try again. Do you have the tutorial for the magisk to root?
73Hn said:
Thanks, I can restore and try again. Do you have the tutorial for the magisk to root?
Click to expand...
Click to collapse
I think most can figure out Magisk from here, the real hurdle was the lack of a recovery because the stock rom doesn't allow Magisk to be flashed.
Thanks, I already started checking in on it... I'll update here once I get through.
How to Root Blu Dash M 2 with Magisk
I have managed to root the stock system using Magisk. The stock recovery will not let you do this, as usual ignore the garbage on youtube and personal blogs, they're giving false info and fake files. This method works and I'm the first user who ported CTR 6.6 to allow for this.
DOWNLOAD Magisk from developer https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
FOLLOW THE ABOVE POST to replace stock recovery with CTR 6.6
Instructions
- Follow first post to install CTR 6.6 recovery and reboot a couple of times to make sure it stuck.
- Enable OEM unlock under developer options and power down phone
- Boot to new CT 6.6 recovery by pressing PWR + VOL UP
- In recovery choose "Install Zip" and choose the "Magisk.zip" from your /SDCARD
Magisk installer will launch and if you did everything right, complete without errors.
- Select Reboot Phone from CTR menu and when asked to patch , Select " NO "
Phone should now reboot twice and have Magisk installed. I have verified root by deleting protected files like default.prop and gave Root Explorer permanent root access. If something doesn't work just find the right sequence. I believe it was flash system, flash recovery. wipe partitions. flash magisk
Enjoy !
The only thing left do now is find the Blu kernel source code for the M2 so a working TWRP can be compiled from scratch, then any MT6580 rom should be flashable.
Perfectly... Got it working using your same method after reinstalling the firmware... only difference was.
After installing recovery and booting into it, I then installed Magisk via adb sideload.
Confirmed root works.
Thank you very much for your patience and assistance
graciaaas
romish said:
How to Root Blu Dash M 2 with Magisk
I have managed to root the stock system using Magisk. The stock recovery will not let you do this, as usual ignore the garbage on youtube and personal blogs, they're giving false info and fake files. This method works and I'm the first user who ported CTR 6.6 to allow for this.
DOWNLOAD Magisk from developer https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
FOLLOW THE ABOVE POST to replace stock recovery with CTR 6.6
Instructions
- Follow first post to install CTR 6.6 recovery and reboot a couple of times to make sure it stuck.
- Enable OEM unlock under developer options and power down phone
- Boot to new CT 6.6 recovery by pressing PWR + VOL UP
- In recovery choose "Install Zip" and choose the "Magisk.zip" from your /SDCARD
Magisk installer will launch and if you did everything right, complete without errors.
- Select Reboot Phone from CTR menu and when asked to patch , Select " NO "
Phone should now reboot twice and have Magisk installed. I have verified root by deleting protected files like default.prop and gave Root Explorer permanent root access. If something doesn't work just find the right sequence. I believe it was flash system, flash recovery. wipe partitions. flash magisk
Enjoy !
Click to expand...
Click to collapse
Thank you very much! You do not know how much I needed to be root! I thought that this device was impossible to root. I really am very grateful. Friend was asking me if you could adapt the custom Slimrom rom for this device? because all the storage of this one takes the system, it would be of great help for all the users of this phone, I do not know if you can or are interested, but I thank you in advance
romish said:
We have the first port and root for this highly unpopular BLU phone.
DOWNLOAD from uploadfiles.io @ https://ufile.io/bj9kk
Enjoy !
Click to expand...
Click to collapse
Hi, can you provide a download link that doesn't require you to get a premium account to access the file. It's against XDA rules.
kirito9 said:
Hi, can you provide a download link that doesn't require you to get a premium account to access the file. It's against XDA rules.
Click to expand...
Click to collapse
It is not premium, the file just expired so the site will keep it on line for a fee. I'll upload it again.
romish said:
It is not premium, the file just expired so the site will keep it on line for a fee. I'll upload it again.
Click to expand...
Click to collapse
Try this one.. if the host tries to replace it with the original let us know and one of the others who have the file will re upload it to another host. I don't feel like signing up anywhere so that is why I use this host.
https://ufile.io/8oc6k
https://ufile.io/8oc6k
https://ufile.io/8oc6k
kevoncrush said:
Thank you very much! You do not know how much I needed to be root! I thought that this device was impossible to root. I really am very grateful. Friend was asking me if you could adapt the custom Slimrom rom for this device? because all the storage of this one takes the system, it would be of great help for all the users of this phone, I do not know if you can or are interested, but I thank you in advance
Click to expand...
Click to collapse
All 'ya 'all are welcome . Unfortunately I can't go any further because there is no source for the kernel so TWRP won't work because there is no touch to get past the first screen. Otherwise if it. did slim rom would flash without any problems, its just these older recoveries don't support a few things that TWRP has to make flashing full roms successful. If someone has source files for the BLU Dash M2 let me know.
I'll just let you guys know, I managed to make a pretty good custom rom with root only by deleteing everything but the core OS. I don't recommend this for everyone but I did get rid of just about everything and made this 6.0 more like 4.4 .. I got it to the point where even the phone and SMS didn't work and the google framework was deleted, then slowly began adding my approved versions of apps. Now its totally de googled but again I realize this isn't for everyone. I just wanted a small rom with camera ad GPS and those are working fine for me.
Custom recovery link taken down again
Could someone please upload the custom recovery again?
[Port] [Recovery] BLU DASH M 2
I tried to fast boot as peryour instructions but I get the error: cannot load ' ctr_6.6.1 etc. :crying:
Please try this link, if you have a better locarion to store it please do so and reshare as this link is only valid for 2 days.
ctr_6.6.1_blu_dash_m2_d090u.img
---------- Post added at 05:08 AM ---------- Previous post was at 05:01 AM ----------
If that recovery does not work, try this one. I have two of different sizes and can't remember which one i used.
recovery.img
Download link
Please repost the download link
Hey guys, this is my first post. I just bought a Samsung SM-T510 and would like to unlock all the features. I'm currently trying to follow multiple guides on how to do so. To my understanding, my best bet is lineageOs 16. I've been following https://forum.xda-developers.com/gal...-16-0-t3987317 alongside with https://forum.xda-developers.com/gal...howto-t3989361 and I'm pretty confused on the method order i need to follow. What I mean is do I install rom first, TWRP, Magisk etc.?
More guides ive been following:
https://forum.xda-developers.com/gal...-10-1-t3934805
https://forum.xda-developers.com/app...mless-t3473445
https://topjohnwu.github.io/Magisk/i...system-as-root
I see posts saying I need and don't need Multidisabler so I'm confused on what I actually need: https://forum.xda-developers.com/gal...ption-t3963020
Another one: https://forum.xda-developers.com/gal...ption-t3919714
https://forum.xda-developers.com/gal...eries-t3918699
I have so many tabs open currently; I know I'm missing a few important ones.
So given all that info, i think i have all the software to do this between kernels, rom, twrp, odin, magisk, multi disabler? and i think thats all.
My sm-t510 build number is T510XXU2ASK5, looking through the lineage rom guide, I click the link https://samfrew.com/model/SM-T510/ and i see different versions. I'm honestly completely confused about this file and how I'm going to use it. I understand it to be the stock rom? as in factory software? With TWRP too, the numbers don't match my current build number leaving me very confused.
Do I need to downgrade my build number (i don't know if it's even a thing just asking)?
I think i can do everything relatively easy once I have an understanding of what to do first (order of things) and the specific files for the specific steps. When I'm reading these guides, I honestly have no idea which download goes for what. For ex. going back to https://forum.xda-developers.com/gal...-16-0-t3987317 like what do I need to download, the build number listed in notes regarding kernel or go to the download section right below and use that? Or both and if both, how do I use them separately for there a specific purpose? I cannot find anything that makes me feel comfortable rooting/custom rom on my device. Not comfortable in terms of I don't know what I'm doing exactly. I have put days of reading into this and still, I cannot figure out how to do this. I would really appreciate it if someone could help me. This is stressing me out and I would like to get this done before Monday due to me having some serious surgery. The reason being; I won't be as fresh on everything I've read recently.
I'm sorry if this post is choppy and all over the place. I'm just exhausted and clueless at this point. If I left any info out in order for someone to help me please let me know so I can provide it.
EDIT: The TWRP file ends in build number SK1, the file lineage-16.0-20191019-UNOFFICIAL-T510XXU2ASI4.tar.md5 doesn't match the TWRP file as well as my current build number; which ends in SK5. So nothing is matching the 3 last characters in my build number across all guides besides the samfrew link.
Also, I keep seeing i need a .tar TWRP file for recovery (?) but when I unzip both files are .img (named boot/recovery)
You don’t unzip the .tar files. Keep them as is.
secretwolf98 said:
You don’t unzip the .tar files. Keep them as is.
Click to expand...
Click to collapse
I don't get a .tar file until I unzip the folder; I get a filed with .tar.md5
My recommendation would be to first upgrade to T510XXS2ASK1 of the OEM firmware, since that's the latest version for which Samsung has published kernel source. Use the latest release of Odin and install BL, AP and HOME_CSC. After this, unlock the bootloader and prevent VaultKeeper from relocking it by always enabling Debugger Options while connected to the Internet after a factory wipe.
From there, you could just install TWRP, install the latest MultiDisabler, and live with the Samsung firmware. You could even install Magisk to root. However, I prefer a clean Google OS without all the OEM bloatware, so I'd recommend installing the latest Nexus Stock (which includes TWRP and the custom kernel that disables Knox boot security features). Again, use Odin and install it to AP and do a factory wipe in TWRP because file-based encryption is still unsupported on these custom ROMs.
You could install LineageOS instead, but I haven't yet updated that for T510XXS2ASK1. I've just been busy and Andy hasn't been releasing any new LineageOS 16 GSIs. We're also pretty close to releasing a LineageOS 17 build.
fountainb234 said:
I don't get a .tar file until I unzip the folder; I get a filed with .tar.md5
Click to expand...
Click to collapse
Just rename the file cutting off the .md5.
is it possible to downgrade from sk5 to sk1? you cannot upgrade to a later version, and I know downgrading can have reverse effects on the tablet. I have same tablet I would like to know. if I flash sk1 is there a way to fix it if it bricks?
Magendanz said:
My recommendation would be to first upgrade to T510XXS2ASK1 of the OEM firmware, since that's the latest version for which Samsung has published kernel source. Use the latest release of Odin and install BL, AP and HOME_CSC. After this, unlock the bootloader and prevent VaultKeeper from relocking it by always enabling Debugger Options while connected to the Internet after a factory wipe.
From there, you could just install TWRP, install the latest MultiDisabler, and live with the Samsung firmware. You could even install Magisk to root. However, I prefer a clean Google OS without all the OEM bloatware, so I'd recommend installing the latest Nexus Stock (which includes TWRP and the custom kernel that disables Knox boot security features). Again, use Odin and install it to AP and do a factory wipe in TWRP because file-based encryption is still unsupported on these custom ROMs.
You could install LineageOS instead, but I haven't yet updated that for T510XXS2ASK1. I've just been busy and Andy hasn't been releasing any new LineageOS 16 GSIs. We're also pretty close to releasing a LineageOS 17 build.
Click to expand...
Click to collapse
fountainb234 said:
Hey guys, this is my first post. I just bought a Samsung SM-T510 and would like to unlock all the features. I'm currently trying to follow multiple guides on how to do so. To my understanding, my best bet is lineageOs 16. I've been following https://forum.xda-developers.com/gal...-16-0-t3987317 alongside with https://forum.xda-developers.com/gal...howto-t3989361 and I'm pretty confused on the method order i need to follow. What I mean is do I install rom first, TWRP, Magisk etc.?
More guides ive been following:
https://forum.xda-developers.com/gal...-10-1-t3934805
https://forum.xda-developers.com/app...mless-t3473445
https://topjohnwu.github.io/Magisk/i...system-as-root
I see posts saying I need and don't need Multidisabler so I'm confused on what I actually need: https://forum.xda-developers.com/gal...ption-t3963020
Another one: https://forum.xda-developers.com/gal...ption-t3919714
https://forum.xda-developers.com/gal...eries-t3918699
I have so many tabs open currently; I know I'm missing a few important ones.
So given all that info, i think i have all the software to do this between kernels, rom, twrp, odin, magisk, multi disabler? and i think thats all.
My sm-t510 build number is T510XXU2ASK5, looking through the lineage rom guide, I click the link https://samfrew.com/model/SM-T510/ and i see different versions. I'm honestly completely confused about this file and how I'm going to use it. I understand it to be the stock rom? as in factory software? With TWRP too, the numbers don't match my current build number leaving me very confused.
Do I need to downgrade my build number (i don't know if it's even a thing just asking)?
I think i can do everything relatively easy once I have an understanding of what to do first (order of things) and the specific files for the specific steps. When I'm reading these guides, I honestly have no idea which download goes for what. For ex. going back to https://forum.xda-developers.com/gal...-16-0-t3987317 like what do I need to download, the build number listed in notes regarding kernel or go to the download section right below and use that? Or both and if both, how do I use them separately for there a specific purpose? I cannot find anything that makes me feel comfortable rooting/custom rom on my device. Not comfortable in terms of I don't know what I'm doing exactly. I have put days of reading into this and still, I cannot figure out how to do this. I would really appreciate it if someone could help me. This is stressing me out and I would like to get this done before Monday due to me having some serious surgery. The reason being; I won't be as fresh on everything I've read recently.
I'm sorry if this post is choppy and all over the place. I'm just exhausted and clueless at this point. If I left any info out in order for someone to help me please let me know so I can provide it.
EDIT: The TWRP file ends in build number SK1, the file lineage-16.0-20191019-UNOFFICIAL-T510XXU2ASI4.tar.md5 doesn't match the TWRP file as well as my current build number; which ends in SK5. So nothing is matching the 3 last characters in my build number across all guides besides the samfrew link.
Also, I keep seeing i need a .tar TWRP file for recovery (?) but when I unzip both files are .img (named boot/recovery)
Click to expand...
Click to collapse
without reading answers i can say that im with YOU! Im almost 3 days to root my T510! We must RAMDISK YES in Magisk but to do that we need to extract recovery.img (https://www.droidwin.com/install-magisk-in-recovery-root-android/) from stock original ROM T510OXM5CUJ1 and Im stucked at the part NORAMDISK trying to patch recovery.img with Magisk Manager (with recovery mode checked) but i only get the "waiting for device in ADB" and I conect disconect USB C and nothing...Still NO RAMDISK...
I used 3 different ROMS but no lucky and tried with firmware CUJ1 but no lucky again. Without "NORAMDISK: YES" no root...stucked. But i saw a T510 with OrangeFOX!
framC0 said:
without reading answers i can say that im with YOU! Im almost 3 days to root my T510! We must RAMDISK YES in Magisk but to do that we need to extract recovery.img (https://www.droidwin.com/install-magisk-in-recovery-root-android/) from stock original ROM T510OXM5CUJ1 and Im stucked at the part NORAMDISK trying to patch recovery.img with Magisk Manager (with recovery mode checked) but i only get the "waiting for device in ADB" and I conect disconect USB C and nothing...Still NO RAMDISK...
I used 3 different ROMS but no lucky and tried with firmware CUJ1 but no lucky again. Without "NORAMDISK: YES" no root...stucked. But i saw a T510 with OrangeFOX!
Click to expand...
Click to collapse
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file. You can flash the Nexus ROM without first flashing anything else but the latest CUL1 (not CUJ1) stock ROM. Nexus includes both TWRP and gapps. The only time you have to patch things to get Magisk installed is when you are trying to root a stock ROM instead of a custom ROM. Custom ROMs always to the patching for you.
lewmur said:
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file. You can flash the Nexus ROM without first flashing anything else but the latest CUL1 (not CUJ1) stock ROM. Nexus includes both TWRP and gapps. The only time you have to patch things to get Magisk installed is when you are trying to root a stock ROM instead of a custom ROM. Custom ROMs always to the patching for you.
Click to expand...
Click to collapse
Wow i will try this today and will post feedback. Are you on Android 11? Thank You!
UPDATE: So...flashed with T510XXU5CUL1...
From OEM stock firmware:
Unlock bootloader -> done
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin --> twrp-3.6.0_11-2-T510XXU5CUL1-20220218.tar ---> this put the tablet into emergency mode... had to do again "Hold Vol Up & Vol Down buttons during restart to enter Download mode" and reflash it again. stucked at this point. cant flash TWRP with that! Maybe this TWRP file its for Android 11.2 and im on 11?
framC0 said:
Wow i will try this today and will post feedback. Are you on Android 11? Thank You!
UPDATE: So...flashed with T510XXU5CUL1...
From OEM stock firmware:
Unlock bootloader -> done
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin --> twrp-3.6.0_11-2-T510XXU5CUL1-20220218.tar ---> this put the tablet into emergency mode... had to do again "Hold Vol Up & Vol Down buttons during restart to enter Download mode" and reflash it again. stucked at this point. cant flash TWRP with that! Maybe this TWRP file its for Android 11.2 and im on 11?
Click to expand...
Click to collapse
You don't need to flash TWRP if you flash https://forum.xda-developers.com/t/...k-for-2019-galaxy-tab-a-10-1-sm-t510.4234889/ TWRP is built into this ROM. After installing stock CUL1, did you boot it, connect to wifi, skip the rest of setup and then enable Dev mode before rebooting to download and flashing from Odin?
edit: Don't attempt to download from the regular download link. Use the link under Build archives that says Android File Host and scroll down till you find the CUL1 md5 file.
lewmur said:
You don't need to flash TWRP if you flash https://forum.xda-developers.com/t/...k-for-2019-galaxy-tab-a-10-1-sm-t510.4234889/ TWRP is built into this ROM. After installing stock CUL1, did you boot it, connect to wifi, skip the rest of setup and then enable Dev mode before rebooting to download and flashing from Odin?
edit: Don't attempt to download from the regular download link. Use the link under Build archives that says Android File Host and scroll down till you find the CUL1 md5 file.
Click to expand...
Click to collapse
AH! So donwloaded Nexus_Stock_CR_T510XXU5CUL1-20220219.tar and put into AP in Odin... and FAIL. Error: "Only official released binaries are allowed". Before i flashed with T510XXU5CUL1 didnt conect wifi and enabled usb debug.
EDIT: i dont have OEM unlock option in DEV but its unlocked, i checked when in downloaded mode it says "lock device and..." so its unlocked.
framC0 said:
AH! So donwloaded Nexus_Stock_CR_T510XXU5CUL1-20220219.tar and put into AP in Odin... and FAIL. Error: "Only official released binaries are allowed". Before i flashed with T510XXU5CUL1 didnt conect wifi and enabled usb debug.
Click to expand...
Click to collapse
You must connect wifi and enable Dev mode before flashing. If, after flashing CUL1, you went through the regular setup routine and put in a Google Account, you must also enable OEM in Dev options.
lewmur said:
You must connect wifi and enable Dev mode before flashing. If, after flashing CUL1, you went through the regular setup routine and put in a Google Account, you must also enable OEM in Dev options.
Click to expand...
Click to collapse
YES!!!!!! YOU ARE THE BEST!!!! Done! It booted directly to TWRP!!! THANK YOU!!!! So now will flash Magisk with twrp right? Alawys rooted my devices but this 510 wow...never saw a thing like this
Edit: The fight continues - So i did wipe and format data in TWRP and reboot system and im IN. Installed Magisk 23.0.apk and noticed that im still with "RAMDISK: no"... Searching how to do next to root! Im very near of the goal!!!! Finally! Big thanks to lewmur!
lewmur said:
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file. You can flash the Nexus ROM without first flashing anything else but the latest CUL1 (not CUJ1) stock ROM. Nexus includes both TWRP and gapps. The only time you have to patch things to get Magisk installed is when you are trying to root a stock ROM instead of a custom ROM. Custom ROMs always to the patching for you.
Click to expand...
Click to collapse
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file.
Click to expand...
Click to collapse
Sorry just one more question im very near. I will flash this Magisk (magisk_patched-24300_tkk90.img) in TWRP or Odin? And is this file from https://forum.xda-developers.com/t/...019-galaxy-tab-a-10-1-sm-t510.4234889/page-18 ?
My brain will explode few days in a row to get it rooted
EDIT: Since an older version dont know witch, Magisk Manager and Magisk are joined in apk so i just flashed Magisk 23.0.apk in TWRP...rooted!!! DONE!!!! FINALLY
framC0 said:
Sorry just one more question im very near. I will flash this Magisk (magisk_patched-24300_tkk90.img) in TWRP or Odin? And is this file from https://forum.xda-developers.com/t/...019-galaxy-tab-a-10-1-sm-t510.4234889/page-18 ?
My brain will explode few days in a row to get it rooted
Click to expand...
Click to collapse
Download latest Magisk from https://magiskapp.com/zip/ and flash with TWRP.
lewmur said:
Download latest Magisk from https://magiskapp.com/zip/ and flash with TWRP.
Click to expand...
Click to collapse
Thank you!! Im facing a problem when connect USB to PC...sometime tablet restarts and sometimes dont appear on PC even in device manager. Did you got this also? Not very important because i will access via FTP. Just to learn...thanks!
framC0 said:
Thank you!! Im facing a problem when connect USB to PC...sometime tablet restarts and sometimes dont appear on PC even in device manager. Did you got this also? Not very important because i will access via FTP. Just to learn...thanks!
Click to expand...
Click to collapse
USB cables are notorious for being flaky. Sometimes it helps to just turn the cable over and plug it back in. I always keep several on hand so that if I have connection problems I can try another cable.