Friends, I did the rom exchange of an A9, but now it does not start and it displays the image message below, can any one help me?
sorry my english I'm using the translator
Log Odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 6807 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> xbl.elf
<ID:0/004> tz.mbn
<ID:0/004> hyp.mbn
<ID:0/004> devcfg.mbn
<ID:0/004> pmic.elf
<ID:0/004> rpm.mbn
<ID:0/004> cmnlib.mbn
<ID:0/004> cmnlib64.mbn
<ID:0/004> keymaster.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> apdp.mbn
<ID:0/004> msadp.mbn
<ID:0/004> bksecapp.mbn
<ID:0/004> storsec.mbn
<ID:0/004> sec.dat
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> vendor.img.ext4
<ID:0/004> persist.img.ext4
<ID:0/004> userdata.img.ext4
<ID:0/004> dqmdbg.img.ext4
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> dspso.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> cache.img.ext4
<ID:0/004> odm.img.ext4
<ID:0/004> omr.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Print Erro
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hi.
i have same problam. i could not solve yet.
my a920 is live demo unit.
yours is a920f or a920x?
Is live demo, a920x
X ain't a phone
You realise that any X device will never be a phone, don't you? There's missing hardware, crucially, no modem - so communicating with POTS. No software mods will ever fix that problem. The best use for any X demo unit that I can figure out is as the display in a Gear VR headset.
1024kb said:
You realise that any X device will never be a phone, don't you? There's missing hardware, crucially, no modem - so communicating with POTS. No software mods will ever fix that problem. The best use for any X demo unit that I can figure out is as the display in a Gear VR headset.
Click to expand...
Click to collapse
we know that. our problem is not that.
first read . dont send messagge like rubish
---------- Post added at 09:47 PM ---------- Previous post was at 09:44 PM ----------
renedias12 said:
Is live demo, a920x
Click to expand...
Click to collapse
yes my phone is 920x too.
i can solve problema about all live demo but a920x i could not
if you solve problema please write me
So far I could not solve it. If I could, I'd warn you.
I think you have to flash the modem of the live demo unit
---------- Post added at 09:26 PM ---------- Previous post was at 09:02 PM ----------
I'm buying the solution I'm missing 1 dollar
A920x secure check fail : modem
I bought the solution but no use still the same
Please someone help
I will pay
---------- Post added at 02:05 PM ---------- Previous post was at 02:04 PM ----------
SebastianSNRL said:
I think you have to flash the modem of the live demo unit
---------- Post added at 09:26 PM ---------- Previous post was at 09:02 PM ----------
I'm buying the solution I'm missing 1 dollar
Click to expand...
Click to collapse
I bought the solution from 2 3 sites
But no use
can you put your phone in to download mode ?
Regards
renedias12 said:
So far I could not solve it. If I could, I'd warn you.
Click to expand...
Click to collapse
Olá Rene. Sou brasileiro também e estou com esse problema. Você conseguiu resolver???
Se sim e puder ajudar me mandar uma msg via whatsapp 21 96940-0829.
Muito obrigado!
Did someone knows where or how can I get the PIT file for SM-A920F?
that X indicates that it the Demo version of that phone. it only availible in the Samsung showroom ( so you can test drive it ) if you want to flash it. you need to somehow change the PIT firmware in to the one that has correct model for it..
( wrong PIT file also makes the phone unable to boot up too ) at least it's my experience...
Regards
edgarlance said:
Did someone knows where or how can I get the PIT file for SM-A920F?
Click to expand...
Click to collapse
You can get the PIT file from the stock firmware ( the 4 files ones ) it's in the CSC file that you need to extract it from.
Regards
hi. good day. have you solved the problem?
Rattanak said:
that X indicates that it the Demo version of that phone. it only availible in the Samsung showroom ( so you can test drive it ) if you want to flash it. you need to somehow change the PIT firmware in to the one that has correct model for it..
( wrong PIT file also makes the phone unable to boot up too ) at least it's my experience...
Regards
Click to expand...
Click to collapse
Related
Shoot guys I'm really sorry for multi posting but so far the answers aren't helping I promise this is my last post of this.
OK first off I going to express my deepest apologies for starting a thread with an issue that has probably been answered 100 times... My problem is that I have tried every possible phrase that I know for search term pertaining to my particular issue and I am still stuck. SO I will be as details as possible and I hope and pray that at LEAST if I get kicked for starting this and the thread being shutdown, that someone will have posted "heres the link numb nuts be more careful next time".
OK so on with my issue. I have a Rogers Samsung Galaxy S4 I337M on 4.3, I tried to use chainfire's latest cf-Autoroot to root my phone and it just failed. Here is the log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
As you can see when odin could not find the PIT I downloaded one and retried.
Anyway now I'm stuck on this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and the top left may be important so here is the clearest shot of that:
Now I have tried to flash stock firmware that I downloaded from sammobile AND samsung update and no matter how many times I try to flash its the same thing over and over again (log):
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
I then thought about trying Kies. First problem, Emergency firmware did not list my device. Then I tried firmware upgrade and initialize and even though the start button wouldn't show unless I plugged the phone in as download mode, once the firmware was finished downloading and ready to flash it would give me an error saying it couldn't not detect my device.
I am not sure is this is EVERYTHING I could have tried but to MY knowledge it is. Please help
And my deepest gratitude to anyway and all who point me to the right direction. I hope I have been as detailed as I possibly can be.
CF-Auto Root
Some basic questions.... can you still get to download mode? Most importantly... did you use the Canadian file for cf auto root found here? http://forum.xda-developers.com/showthread.php?t=2293800 the I337 is not the same as the Canadian I337M so if you used the wrong file that would cause it to fail... does it boot at all if you try? also did you check the md5 to ensure your download was complete if you did use the right file??
i was put this officials roms for n910H
N910HXXU1ANK5_N910HPSP1ANK6_N910HXXU1ANK5_HOME.tar.md5 android 4.4
N910HXXU1AOB1_N910HOJV1ANL2_N910HXXU1ANL3_HOME.tar.md5 android 4.4
N910HXXU1BOC5_N910HOXE1BOC5_N910HXXU1BOC5_HOME.tar.md5 android 5.0.1
and the odin put this error
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910HXXU1BOC5_N910HOXE1BOC5_N910HXXU1BOC5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.img
<ID:0/011> recovery.img
<ID:0/011> system.img
<ID:0/011> modem.bin
<ID:0/011> cache.img
<ID:0/011> hidden.img
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i used odin x v3.09 , 3.10 and 1.85 the same in all
what is wrong? i read something of PIT but a i dont know . sorry for my english
I had the same error before.
You have to reflash your phone with the previous version of firmware you had on the phone.
Enviado desde mi SM-N910C usando Tapatalk 2
Cim6 said:
I had the same error before.
You have to reflash your phone with the previous version of firmware you had on the phone.
Enviado desde mi SM-N910C usando Tapatalk 2
Click to expand...
Click to collapse
well, how upgrade the android?
Try to disable reactivation lock in the security settings
i have a big problem i dont know what is my previous version of firmware are alot of in sammobil e and i dont know what is my CSC
here I leave these pictures
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
el kiris said:
well, how upgrade the android?
Click to expand...
Click to collapse
Flash te old firmware, do all wipes and finally flash the phone with the new version.
Enviado desde mi SM-N910C usando Tapatalk 2
Cim6 said:
Flash te old firmware, do all wipes and finally flash the phone with the new version.
Enviado desde mi SM-N910C usando Tapatalk 2
Click to expand...
Click to collapse
i dont know what is my previous version neither my CSC
with kies 3 , i put S/N and its say this
View attachment 3233239
TTT is Trinidad y Tobago but in sammobile not be
i found the firm is
PDA N910HXXU1ANIF
CSC N910HUUB1ANIF
ok you say me that for update , need i make the wipes? and later update?
the only firm for model H is this
Model SM-N910H
Model name GALAXY Note 4
Country Uzbekistan
Version Android 5.0.1
Changelist 4461737
Build date Fri, 20 Mar 2015 10:32:45 +0000
Product code CAC
PDA N910HXXU1BOC5
CSC N910HOXE1BOC5
but is not the same CSC , no problem? or what i do ? regards
I am having the exact same issue. however BOB4 roms are working fine im just having issues with BOC3 roms.
i was make th wipes for update 4.4 - 5.0.1 and odin say same
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910HXXU1BOC5_N910HOXE1BOC5_N910HXXU1BOC5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> SingleDownload.
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> boot.img
<ID:0/011> recovery.img
<ID:0/011> system.img
<ID:0/011> modem.bin
<ID:0/011> cache.img
<ID:0/011> hidden.img
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
how i upgrade? i make the wipes and no work , what happen ? its same modelo n910h , help
http://forum.xda-developers.com/note-4/general/solution-hiden-img-error-lollipop-910h-t3067208
Someone put a solution, but I couldn't make the recoveyr image I don't know why. If someone manages to do it I will gladly appreciate it.
I am not an expert at installing ROMs on Android devices. I hope someone can help.
I have a Sprint Galaxy S4, SPH-L720. I have installed CM12 but now I would like to return to a stock ROM. I downloaded several from Sammobile. Now, I cannot install them.
I have tried several versions of ODIN. Attached is the message I get when trying to flash with ODIN 3.09. I have also tried to install from an SD card using CWM and TWRP with similar failure.
Any help will be greatly appreciated.
Code:
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNG2_L720SPTFNG2_L720VPUFNG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
laserman2431 said:
I am not an expert at installing ROMs on Android devices. I hope someone can help.
I have a Sprint Galaxy S4, SPH-L720. I have installed CM12 but now I would like to return to a stock ROM. I downloaded several from Sammobile. Now, I cannot install them.
I have tried several versions of ODIN. Attached is the message I get when trying to flash with ODIN 3.09. I have also tried to install from an SD card using CWM and TWRP with similar failure.
Any help will be greatly appreciated.
Code:
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNG2_L720SPTFNG2_L720VPUFNG2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Click to expand...
Click to collapse
You have a bad download
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for your response. I tried 5 different ROMs from Sammobile, all with the same results. I guess they could all be bad. Does anyone know of a good source for download?
laserman2431 said:
Thanks for your response. I tried 5 different ROMs from Sammobile, all with the same results. I guess they could all be bad. Does anyone know of a good source for download?
Click to expand...
Click to collapse
I've tried to install many different stock packages with pretty much the same results. Also, an image of my current settings attached. Is it a problem that I have 5.0.2 but MDL modem? Do I need to wipe everything before I run ODIN?
The only way that I can restore the phone is to ODIN install the recovery image shown below, then reinstall the CM12 ROM from the SD. When I try to install other zip packages through recovery/SD, they always fail. When I try to install other packages through ODIN, they always fail.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-jfltespr.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
laserman2431 said:
I've tried to install many different stock packages with pretty much the same results. Also, an image of my current settings attached. Is it a problem that I have 5.0.2 but MDL modem? Do I need to wipe everything before I run ODIN?
The only way that I can restore the phone is to ODIN install the recovery image shown below, then reinstall the CM12 ROM from the SD. When I try to install other zip packages through recovery/SD, they always fail. When I try to install other packages through ODIN, they always fail.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.08.9-jfltespr.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Since you installed Lollipop you need to wipe the internal sd. Also the stock images are here on XDA and have a much better download speed. Just look for Odin or TAR in the title. I recommend NG2. That's the latest one.
Solved.
Well. This is embarrassing. It turns out the problem was either with my USB port or my drivers. I had installed drivers and tried the other port already. Maybe it was just a bad combination.
I hope this might be helpful to other people having the same problem.
Thanks for the help!
laserman2431 said:
Well. This is embarrassing. It turns out the problem was either with my USB port or my drivers. I had installed drivers and tried the other port already. Maybe it was just a bad combination.
I hope this might be helpful to other people having the same problem.
Thanks for the help!
Click to expand...
Click to collapse
it's actually the most common problem with Odin.
Hi guy's i have a sprint s4 . While I was using custom rom it deleted my imei and now it show 00000000 how do I write it
---------- Post added at 02:54 AM ---------- Previous post was at 02:54 AM ----------
Need help
---------- Post added at 02:55 AM ---------- Previous post was at 02:54 AM ----------
I was trying to root phone and install custom rom
jaybhatia999 said:
Hi guy's i have a sprint s4 . While I was using custom rom it deleted my imei and now it show 00000000 how do I write it
---------- Post added at 02:54 AM ---------- Previous post was at 02:54 AM ----------
Need help
---------- Post added at 02:55 AM ---------- Previous post was at 02:54 AM ----------
I was trying to root phone and install custom rom
Click to expand...
Click to collapse
Just Odin stock ROM. That is the easiest way to get out back. This will restore you're phone to the state in which you received it.
But it will lock my phone back to sprint.. It's unlocked now
jaybhatia999 said:
But it will lock my phone back to sprint.. It's unlocked now
Click to expand...
Click to collapse
Sorry, I have no experience with that. But you definitely should have started with that bit of information.
Buongiorno sperando che qualcuno qui parli italiano volevo delle informazioni nel mio asus trasformers pad tf700t è stata cambiata la rom e vorrei portarla come era in origine per poi resettare il tablet
jaybhatia999 said:
But it will lock my phone back to sprint.. It's unlocked now
Click to expand...
Click to collapse
When did you install a ROM stock to an unlocked phone, the phone keeps it
I did the upgrade, MDC NG2 and kep it
available on samfirmware
I've seen it but there isn't the one my phone needs (ITV).
Maybe it'll be present on sammobile.com in few days but if that doesn't happen I should flash another carrier firmware, is that possible or could I have problems?
Mirror for VD2 (Vodafone Germany) : https://www.androidfilehost.com/?fid=24369303960685030
It's Multi-CSC : AFV, CNX, CYV, MOB, MTL, OMN, SIM, SWC, TCL, VD2, VDF, VDH, VGR, VIP, VOD, XFV
How to root?
Installation failed
When installing 5.1.1 through ODIN, installation aborts at writting hidden.img. I've tried two different files (VDF and CYV). Anyone tips?
ODIN:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
erwinr said:
When installing 5.1.1 through ODIN, installation aborts at writting hidden.img. I've tried two different files (VDF and CYV). Anyone tips?
ODIN:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
what firrmware have you yoused?
winsmith said:
what firrmware have you yoused?
Click to expand...
Click to collapse
Model SM-G800F
Model name GALAXY S5 mini
Country Netherlands (Vodafone)
Version Android 5.1.1
Changelist 5886751
Build date Fri, 11 Dec 2015 06:35:28 +0000
Product code VDF
PDA G800FXXU1BOL4
CSC G800FVFG1BOL1
and:
Model SM-G800F
Model name GALAXY S5 mini
Country Cyprus
Version Android 5.1.1
Changelist 5886751
Build date Fri, 11 Dec 2015 06:35:28 +0000
Product code CYV
PDA G800FXXU1BOL4
CSC G800FVFG1BOL1
Back to 4.4.2 is no problem!
i've fixed that error with a pit file that has a larger hidden partition.
fuqi said:
i've fixed that error with a pit file that has a larger hidden partition.
Click to expand...
Click to collapse
Can you send a link to that PIT-file?
https://www.androidfilehost.com/?fid=24369303960685133
be sure u use this on a "SM-G800F"
Thanks! I will try it right now and give you the result.
---------- Post added at 10:52 PM ---------- Previous post was at 10:43 PM ----------
Yes! This works for me.
First boot take a long time, now installing lollipop on my G800F! Thanks!
in case you get bootloop (which i did have!) you have to do a factory reset in recovery.
otherwise i'm glad it worked. have fun
Can I also install it on a s5 mini with t-mobile branding?
How much RAM is available after the update?
My phone is reporting 1.23 GB
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fuqi said:
i've fixed that error with a pit file that has a larger hidden partition.
Click to expand...
Click to collapse
i'm not so smart to do that
could you explain step by step how to ?
I used Odin v3.07
Just select the .pit file using the PIT button within Odin
Great ! It's work fine with this files and Odin v3.09, with my G800F. THX a lot for this good method.
erwinr said:
When installing 5.1.1 through ODIN, installation aborts at writting hidden.img. I've tried two different files (VDF and CYV). Anyone tips?
ODIN:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I had same issue. when it arrive, remove batery from phone, it will reboot in recovery. Extract the hidden.img from the rom (remove .md5 extension and open it with 7zip), then rename that file to hidden.bin.tar then flash as pda.
I have found it from:
https://www.reddit.com/r/GalaxyS6/comments/35zshn/howto_fix_a_failed_odin_flash_softbrick_hiddenimg/
Worked perfeclty for me.
What I have understood it is becauase my phone is a branded one (Orange France) and I flashed the unbranded rom ( cyprus) from sammobile
---------- Post added at 02:57 PM ---------- Previous post was at 02:21 PM ----------
S3bl said:
Can I also install it on a s5 mini with t-mobile branding?
Click to expand...
Click to collapse
yes, mine was from Orange branding and I used the Cyprus Rom (unbranded). be sure that your s5 mini is a g800f from the about screen. See my previous post, I had to reflash separately the hidden partition...
Thank you so much!! So simple and working! I do it a little bit other:
1. Put from your firmware file hidden.img an rename it to hidden.img.tar
2. Flash the firmware in Odin as usual with AP. Wait for it to the fail/complete moment.
3. Press your volume down, home button again at the same time and hold it for CA 8 seconds. You came back in Odin load
4. Flash hidden.img.tar that your renamed yet with the AP option in Odin.
5. Your phone should now reboot. It takes a long time!
I'm very happy that i can finally use Android 5.1 on my SM-G800F. Hope that the unbranded versions arrive quickly
Hi everyone,
Today I turned off my phone to save some battery for later.
Too bad cause it wouldn't do anything anymore.
So, no lights, no viberating nothing.
I manged to get it in download mode about 2 hours ago.
But it kept turning off so I charged it for a hour or so.
Right now it doesnt do anything, I've tried to hold the volume down + power button but also no response.
Are there any solutions to fix this? and if I do get it in download mode again should I install twrp and a custom rom if possible?
Hope someone have some good advice before I buy a new one haha
Thanks in advance!
Ronv18 said:
Hi everyone,
Today I turned off my phone to save some battery for later.
Too bad cause it wouldn't do anything anymore.
So, no lights, no viberating nothing.
I manged to get it in download mode about 2 hours ago.
But it kept turning off so I charged it for a hour or so.
Right now it doesnt do anything, I've tried to hold the volume down + power button but also no response.
Are there any solutions to fix this? and if I do get it in download mode again should I install twrp and a custom rom if possible?
Hope someone have some good advice before I buy a new one haha
Thanks in advance!
Click to expand...
Click to collapse
After 30 minutes of trying I manged to get into download modus and tried to install TWRP this way.
Now phone back on black screen trying to boot into twrp.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi everyone,
I managed to sucessfully flash my galaxy S8 according to odin.
Altho I still cant boot up only to download modus.
Is there another solution om how to fix this?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5916 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> up_param.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> userdata.img
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> modem_debug.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response from boot-loader
<ID:0/004> cache.img
<ID:0/004> omr.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse