Database Users

[q] samsung galaxy s4 (i337m) rogers root fail! Possible brick!

Shoot guys I'm really sorry for multi posting but so far the answers aren't helping I promise this is my last post of this.
OK first off I going to express my deepest apologies for starting a thread with an issue that has probably been answered 100 times... My problem is that I have tried every possible phrase that I know for search term pertaining to my particular issue and I am still stuck. SO I will be as details as possible and I hope and pray that at LEAST if I get kicked for starting this and the thread being shutdown, that someone will have posted "heres the link numb nuts be more careful next time".
OK so on with my issue. I have a Rogers Samsung Galaxy S4 I337M on 4.3, I tried to use chainfire's latest cf-Autoroot to root my phone and it just failed. Here is the log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
As you can see when odin could not find the PIT I downloaded one and retried.
Anyway now I'm stuck on this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and the top left may be important so here is the clearest shot of that:
Now I have tried to flash stock firmware that I downloaded from sammobile AND samsung update and no matter how many times I try to flash its the same thing over and over again (log):
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUEMK6_I337MOYAEMK6_I337MVLUEMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
I then thought about trying Kies. First problem, Emergency firmware did not list my device. Then I tried firmware upgrade and initialize and even though the start button wouldn't show unless I plugged the phone in as download mode, once the firmware was finished downloading and ready to flash it would give me an error saying it couldn't not detect my device.
I am not sure is this is EVERYTHING I could have tried but to MY knowledge it is. Please help
And my deepest gratitude to anyway and all who point me to the right direction. I hope I have been as detailed as I possibly can be.

CF-Auto Root
Some basic questions.... can you still get to download mode? Most importantly... did you use the Canadian file for cf auto root found here? http://forum.xda-developers.com/showthread.php?t=2293800 the I337 is not the same as the Canadian I337M so if you used the wrong file that would cause it to fail... does it boot at all if you try? also did you check the md5 to ensure your download was complete if you did use the right file??

[Q] Removing Root - Odin Failing.

Hello
I'm not sure if I'm doing this right so any help would be grateful. I currently have stock firmware installed and I'm trying to remove root from my phone. I searched around and it was suggested to reinstall stock firmware.
So I downloaded a stock rom from this thread, (UK_20H3G_20G900FXXU1ANE2_G900FH3G1AND4_H3G.zip - 1411.3 Mb - (because I'm on Three)) downloaded Odin, ran Odin, stuck my phone into download mode, loaded the firmware into Odin by clicking the PDA button, checked Auto Reboot and then hit start.
Here are the results;
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANE2_G900FH3G1AND4_G900FXXU1ANE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm tried this about 3-4 times and I'm getting the same result each time.
What am I doing wrong?
Thanks.
Possible useful info?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

_McShane_ said:
Hello
I'm not sure if I'm doing this right so any help would be grateful. I currently have stock firmware installed and I'm trying to remove root from my phone. I searched around and it was suggested to reinstall stock firmware.
So I downloaded a stock rom from this thread, (UK_20H3G_20G900FXXU1ANE2_G900FH3G1AND4_H3G.zip - 1411.3 Mb - (because I'm on Three)) downloaded Odin, ran Odin, stuck my phone into download mode, loaded the firmware into Odin by clicking the PDA button, checked Auto Reboot and then hit start.
Here are the results;
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1ANE2_G900FH3G1AND4_G900FXXU1ANE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm tried this about 3-4 times and I'm getting the same result each time.
What am I doing wrong?
Thanks.
Possible useful info?
Click to expand...
Click to collapse
my friend, im sure if you created the thread in Q&A forum
you will got the answer, next time questions can be ask in Q&A 's forum , you will probably have the answer of your problem

Anyone?

S8 SM-G950F I can't flash it

Hello guys.
My s8 sm-g950f was brought to me by my customer whom bought d phone, d customer told me, he mistakenly hard reset his device...Now the device is Requesting for Gmail, he said he had tried the email he think he sign in on d device. now device was now stuck in Activation screen...So i taught of bypass it by flashing combination file and stock rom... so i discovered d device was running lastest update BINARY 2 ...so i download COMBINATION FILE from Z3x server with my z3x box, i downloaded the combination file named(COMBINATION_FA70_G950FXXU2ARE1)
And i also downloaded the Stock Rom i needed from UPDATO named(G950FXXU2CRED)
Now after downloading the two files i needed, i flash the combination file as usual, d device boot and work fine with combination file, then i decided to flash my stock rom back to remove the FRP(how i flash the stock rom to remove d frp was == (i was flashing with z3x) Bl; i deselect some img file. Ap ;i select and flash Boot, recovery, system.. I didnt select Cp, but CSC(i use normal csc not home csc and i selected and flash only cache).
After doing of all this my device boot normal and told my data partition was corrupted , i should reset it, i reseted and i know d frp was still there and have not been removed
Then i started flashing combination and stock rom randomly trying to bypass the frp, trying different things, selecting and deselect when flashing combination and stock rom...all of a sudden was unable to flash anything, when i flash either stock rom/combination it fails instant in INITIALIZATION...
this is an image i took when trying to flash with Z3x lasted vs 33.2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i also tried using lastest Odin version but same error failing in INITIALIZATION...(i don have image for that, sorry)
Now the state of my device in Download mode
Now the state of my device is When i put it in download mode(note ;i can only boot to download only, i cant boot to recovery) and try to flash it either with Odin or Z3x box, it fails at INITIALIZATION... and device will start to reboot till battey drains
Here is a video of how it behaves
https://m.youtube.com/watch?v=maswhPWFnko
Guys i did some research and find out that Is OEM and RMM that is d cause why i cant flash anything... I believe Issue has given hard time working, i cant take off my eyes from it, it so challenging that why am asking for help cos is why pass my intellects...
Guys how do i Fix this Problem, any required information needed, am here to provide
Thanks friends for your Reply

sorry i posted d wrong video of how d device is acting...this is d right video
https://m.youtube.com/watch?v=7wO-UG_VzPM
Thanks Guys for your Reply

successnbd said:
sorry i posted d wrong video of how d device is acting...this is d right video
https://m.youtube.com/watch?v=7wO-UG_VzPM
Thanks Guys for your Reply
Click to expand...
Click to collapse
damn,
I have same problem with you.
keep failing on Odin even with the trick click start and 3 bottom at same time.

https://forum.xda-developers.com/galaxy-s8+/help/help-potential-softbrick-g955f-t3747425 read this carefully

Frp bypass fail
S8 SMg950f frp bypass
Successful flashed combination File
Problem in flashing stock rom
Odin log -home csc not work ing
<ID:0/015> Added!!
<ID:0/015> Removed!!
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin engine v(ID:3.1301)..
<ID:0/012> File analysis..
<ID:0/012> skip file list for home binary
<ID:0/012> param.bin
<ID:0/012> userdata.img
<ID:0/012> Home Binary Download
<ID:0/012> Total Binary size: 3800 M
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> NAND Write Start!!
<ID:0/012> SingleDownload.
<ID:0/012> sboot.bin
<ID:0/012> up_param.bin
<ID:0/012> cm.bin
<ID:0/012> boot.img
<ID:0/012> recovery.img
<ID:0/012> system.img
<ID:0/012> modem.bin
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response from boot-loader
<ID:0/012> modem_debug.bin
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012> Receive Response from boot-loader
<ID:0/012> cache.img
<ID:0/012> hidden.img
<ID:0/012> RQT_CLOSE !!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Try to use patched odin

Phone started boot looping - Can I fix a VZW Galaxy S7 on latest OTA update?

I used to flash phones a lot but our carrier is VZW so our phones have been locked for years and my skills are rusty
The phone is my wife's. It's stock on:
Release date: 04/03/2020
Android™ Security Patch Level: December 2019
Software Version: R16NW.G930VVRSBCTC1
The phone is bootlooping (I've already replaced it with a Pixel 4a) and I'm hoping to rescue it to use as a backup phone.
I downloaded this from Updato:
GALAXY S7 / SM-G930V
8.0.0 Oreo(Android ) /
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
February 25, 19
I see this on the phone:
SW REV CHECK FAIL : [aboot] Fused 11 > Binary 9
[1]eMMC write fail : aboot
In Odin I see this in the log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5238 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> xbl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks for any advice - just trying to get the phone up and running stock

You're trying to flash firmware with Bootloader 9, but your current Bootloader is 11 (means you got last software upgrade and there's no chance to downgrade Bootloader)... This topic is discussed already several times. Wait for new exploit (if this someday will appear) for root for Bootloader 11

lim-popo said:
You're trying to flash firmware with Bootloader 9, but your current Bootloader is 11 (means you got last software upgrade and there's no chance to downgrade Bootloader)... This topic is discussed already several times. Wait for new exploit (if this someday will appear) for root for Bootloader 11
Click to expand...
Click to collapse
Hi - thanks for the reply - now I know what to read up on and that this phone is probably not going to see action again.
My hunch is that if it suddenly started doing this when nothing new has been installed for over a year that it's a hardware issue anyway.

dsteinschneider said:
Hi - thanks for the reply - now I know what to read up on and that this phone is probably not going to see action again.
My hunch is that if it suddenly started doing this when nothing new has been installed for over a year that it's a hardware issue anyway.
Click to expand...
Click to collapse
Then seems that your phone was arrived to you with latest firmware pre installed... But it's definitely an firmware issue, I have the same now in my hands , so I'm also waiting for the root.
P.S.
What's your issue??? I mean, why you want to downgrade???

Flashing stock ROM using Odin fails at param.bin

Hi,
I know this has been asked a lot but I have looked at countless threads trying to rectify this issue.
I have an S7 Edge (SM-G935F) that at some point black screened itself. After numerous attempts at revival, I have managed to get it to at least display something. From what I'm guessing, something at some point has become corrupted and the phone is now soft-bricked. So what I have been attempting to do is flash stock firmware via odin.
Here is a screen showing it is soft bricked ->
https://imgur.com/a/GLUv8Il
Here is a screen showing its download mode stats ->
https://imgur.com/a/XXp2ut8
On the soft brick screen I have used the FRP hijacker tool to both "fix" softbrick as well as remove FRP. I don't think either were sucessful. However, the S7 did boot into the "Galaxy S7" splash screen and then to an "erasing" and an "installing update" screen. Both processes failed and boot loop with a message describing the failure ("dm-verity verification failed" and "fail to open recovery_cause"), but it seems like progress.
Erasing screen ->
https://imgur.com/a/AUX7ITi
Installing update screen ->
https://imgur.com/a/BNdMd6u
Fail screens ->
https://imgur.com/a/3DBV6lC
Also, the phone refuses to boot into the recovery menu, as if its not even there somehow. Instead, the phone boots into the "Galaxy S7" splash screen then the blue screens linked above. Sometimes it boots into the soft brick screen and sometimes into the splash screen. Its difficult to even get it into download mode as it takes a long time (hence the rubber bands to hold the buttons down) and I think the battery is toast.
I have been using Odin 3.14.4 (and 3.13.1) to try and flash stock firmware. What I have been doing is using Frija to download the latest firmware by entering the model number (SM-G935F) and then the country code. However, I do not know which one the phone is. I have done numerous (free) imei checks and one site stated that it was a United Kingdom/Ireland carrier (XEU) (it is a UK phone) but I have tried XEU, BTC, BTU, VIR and VOD and all firmwares fail to flash at the param.bin part. I have also got the PIT file from the XEU CSC_ which sucesssfully flashed, but it made no difference. I've even tried to flash the BL_ by itself to try and get the recovery menu but it still fails at param.bin. I have ruled out that I am using firmware with an older binary as the phone does not display the red text that it normally does when this is attempted. Something to note is that FRP is on, but I do not know if this makes a difference. I should also mention I have tried some firmware from Sammobile which havent worked either.
Here is a screenshot of the param.bin fail using the VIR firmware (after uninstalling the Samsung USB driver just to rule it out)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Odin log:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1401)..
<ID:0/008> File analysis..
<ID:0/008> Total Binary size: 4000 M
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> param.bin
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Im completely stumped now and am in need of advice. I think I have a basic understadning of how Odin works but most of my knowledge has come from attempting to fix this S7. Does the carrier/region even need to match in order for the flash to be sucessful? Does flashing the PIT or BL_ bring back the recovery menu? What are the next steps to fix/flash this S7. Does it seem like there's actually a hardware fault?
I apologise if I dont respond immediately and for the wall of text (I have tried to be thorough). Any help is greatly appreciated, thanks.

I just wanted to add that trying to flash without attatching BL_ causes it to fail at boot.img
Odin log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1401)..
<ID:0/008> File analysis..
<ID:0/008> Total Binary size: 3958 M
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> boot.img
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I am having same problem with you. I tried to flash 4-5 firmware but no way. have you found any solution?

Does it show any sign of charging? What happens if you try to flash only CP or CSC? If it consistently fails after a certain number of bytes was transferred, your device could have a broken RAM chip or some other logic board issue, perhaps the flash storage itself is failing.