Hello guys, I have a tablet model SM-T560, and it has been presenting some problems, before I install a custom rom, it was already presenting the defect, which was to crash while I was using an application such as YouTube, video playback in applications, and only getting worse, decided to install a custom rom from kitkat, which i had found in the forum.
I installed it, it worked normal for almost a month, the bricked problem came back and it looked like it was the micro SD card, When i removed the microSD, the problem stopped, it went back to normal for another week, and it was bricked again.
Found another ROM, LineageOS 14.1 worked until yesterday afternoon when it started to reboot again, it could not open an application, which it rebooted non stoped, and the screen crashed and split in two and the colors matched.
[As a last resort I installed STOCK ROM, but the problem did not disappear. Now I have a paper weight in my hands, and I do not know what to do, if anyone knows anything, that I can do. Thanks in advance.
Professor Ding-Bot
marcelo010 said:
Hello guys, I have a tablet model SM-T560..... Now I have a paper weight in my hands, and I do not know what to do, if anyone knows anything, that I can do. Thanks in advance.
Click to expand...
Click to collapse
I have just bought one of these. Which means I'm going to find out everything about it very quickly. If you are still paying attention to your post I would like to know which exact liniage ROM did you use, As far as I know it's fairly impossible to brick Samsung devices these days. Let me know if you're still around and if you are still having difficulties.
Related
hello i'm not too sure if anyone has had this problem before(yes i did do a search), but the camera on my phone has stopped working all of a sudden, it's as if the phone doesn't recognize the camera since all the shortcuts for it are gone and when adding pictures to contacts the option to take a photo is gone too If anyone could help a newb with this problem it would be greatly appreciated. Also sadly i cannot return the phone to tmobile or even send back to htc since it was given to me as a gift and I have no paperwork to prove the purchase.
Are you running a stock ROM?
yes stock rom, the phone was working perfectly until a week ago I can't think of any apps that could've caused this since the only thing installed was resco file explorer. I did however try using one of the early ports of android on it but that shouldn't be the problem since everything was on the memory card
hard reset time.
I've done a hard reset at least 4 times by now to no avail even updated the rom using the latest one on t-mobile us web site
you can try contacting HTC support in the US directly, since all US HD2's are still less than a year old, they might be willing to help...I think you're at the point you need to replace it or get it repaired since it already hasn't cleared up with the hard-resets.
sanyokse3p said:
I've done a hard reset at least 4 times by now to no avail even updated the rom using the latest one on t-mobile us web site
Click to expand...
Click to collapse
hardware issue then. ie broken.
Same thing here
Hey everyone, help would be Greatly appreciated. I am having the exact same problem as the original poster. Can anyone help?
Have you guys maybe tried reinstallin the rom?
Edit:Neverming see you already tried that haha
hello uni guru's and such, im really hoping i can get some help with my Universal (orange version), ive had it a while now and its been sitting at the bottom of a drawer for a year because ive been messing around with my Kaisers', anyway the problem is that it crashes all the time, ive just done a DOC format and flashed orange stock rom and ive actually got it working now but its still crashing every so often. i was hoping someone had a miracle cure as i have done everything and it just white screens.
Thanks for listening and im really hoping to get my uni working as its a just a paper weight at the moment.
Alex
Welcome to forums,
Have you tried MTTY?
Have read on my signature, there are plenty of useful info.
Good luck,
well im not really that new as ive been flashing my kaiser for months, and yes i did the whole doc format through MTTY and it seemed to help but its still as unstable as a elephant on a washing line, im starting to think its not the software and its a just a dying board or something but i will keep trying new things till i get bored
Could it be an installed App or the ROM you are using? I would try a reliable ROM to rule out the software. (Make sure it's not overclocking).
i really doupt its the rom, it was what i tried first but its running the stock one it came with and it boots up, and it seems whenever i do anything the screen will just go blue, or green, or white. and im not running any installed apps.
it might poss be hardware struggling but i cant think what its struggling with.
I have a Viewsonic Viewpad 10s and some problems with the screen, I flashed at first the version Vegacomb 9n + Update 3. At the beginning it was wonderful but then the screen does not work properly. Even after a reboot did not care much. I went to ClockworkmodRecovery and flashes Honey Ice, it was back to normal. Some time later came the same problem, can someone tell me what it is?
The other question is, what ROM is to recommend the best? The tab is a Christmas present, I do not want to have again after 2 days because it is not reasonable ...
I am in a German forum, but there are not really someone who has the problem with the screen ...
Megamanwwh said:
I have a Viewsonic Viewpad 10s and some problems with the screen, I flashed at first the version Vegacomb 9n + Update 3. At the beginning it was wonderful but then the screen does not work properly. Even after a reboot did not care much. I went to ClockworkmodRecovery and flashes Honey Ice, it was back to normal. Some time later came the same problem, can someone tell me what it is?
The other question is, what ROM is to recommend the best? The tab is a Christmas present, I do not want to have again after 2 days because it is not reasonable ...
I am in a German forum, but there are not really someone who has the problem with the screen ...
Click to expand...
Click to collapse
I had the same problem with my Viewpad 10s with Vegacomb, HoneyIce and newer roms. One of the original issues was using it while it was plugged into the charger the screen became either unresponsive, or would randomly apply keystrokes that were not touched. Two people posted solutions, heating the outside of the tab with a hair dryer, and putting more pressure on the tab (squeezing the case) as you were touching the screen. I did find the extra pressure did help, but it was crazy trying to get the pressure just right. also noticed that screen worked differently in portrait and landscape mode. I often had to use portrait mode to slide the unlock across, while landscape would not allow the tab to unlock.
I decided to "downgrade" the rom to stock, it worked, then to modified stock, it worked but had some touchscreen inconsistencies, then to Corvus 5 rom, which I read somewhere solved other peeps touchscreen problems. Once I got Corvus 5 up and unlocked, I used his screen recalibration tool in apps and everything works perfect. I've been up and running for a month with no touchscreen problems. I even backed up Corvus 5, and tried Vegacomb and HoneyIce again. They worked for a couple of days, and then tab went back to touchscreen issues. I'm thinking it's a kernel sensitivity issue, but I'm know expert, and it's not happening on enough tabs for devs to take as a serious issue.
Hope this helps!!
you are one of the lucky ones man..i tried Corvus 5, true the method you described and still have the issues, well..actually i tried every single Rom and no luck.
I know it's mostly a hardware problem, the only differences in Rom's is the heating they produce, some more, some less..so depending on how bad your case is, you might find a balance and make it work for some time..or no time..
By the way, anyone knows if it's possible to disable the touchscreen inputs, from terminal, adb commands or maybe some app?
Hi XDA,
I've been playing around with my phone, all was fine until I downloaded SGS4Flasher from the play store and flashed something onto my phone. Since then, It's been mayhem to get back right again.
I installed a new PIT file, this seemed to fix the problem I had. I then installed OTA updates, which has changed my device Baseband version to i9505xxuemj7 from i9505xxubmga.
I used to be running android 4.2.2, but from simply installing Cyanogenmod through recovery, my phone could run Android 4.3.
Now my phone is running as normal again - Except every so often it'll crash and then get stuck in the bootloop, so I have to remove my battery and give it a few minutes before re-inserting and powering on my device for it to work properly. This means I cannot play games, tether my internet for too long etc. It's rather frustrating having such a nice phone yet not being able to use it.
Due to being new at this, I've kinda put up with the problem for a little while now - But its getting ridiculous now.
Can someone help me, I'm not good with all the terms of PDA, CSC etc - I'd like to be explain to taught what to do in plain black and white please, I know this can be daunting and frustrating, but so is this problem of mine that I've caused.
If you need any more information than what I have provided please just ask.
I'm from the UK and I'm using a pay monthly sim from Vodafone.
I am using the i9505 device with qualcomm processor - Jfltexx
If anything, I don't care about android 4.2.2 or android 4.3, they both seemed decent enough to me, but ROM wise, I absolutely loved Cyanogenmod. But anything that'll make my phone work without crashing, please help.
Do I need to find a new Kernel? PIT? I'm not sure what to call it? CSC? PDA?
All I'm used to is booting my phone into recovery mode, choosing install, and then choosing Cyanogenmod from my SD_CARD.
I've used ODIN before to do something with files, following tutorials from the internet - I think this was ROOTING Clockword Recovery Mod, or TeamWIN RP or something? I believe these are the files that make the RECOVERY mode on my phone that allows me to install Cyanogenmod through my SD Card.
Please simplify this as much as possible for me, even if it comes across as insulting ... an A B C guide would be appreciated highly.
Thanks,
So you do have this issues with Cyanogenmod and with the stock rom? I've had similair issues when my battery was malfunctioning. Can you check with a different battery?
Lennyz1988 said:
So you do have this issues with Cyanogenmod and with the stock rom? I've had similair issues when my battery was malfunctioning. Can you check with a different battery?
Click to expand...
Click to collapse
The phone is virtually brand new - I'll get another battery yes, but It wont be the exact same one that comes with the device - It'll probably be a cheap Chinese make from Ebay for about £5.
The battery has been acting strange, and I'm not sure if its just me or not, but the battery feels sorta swelled as opposed to being completely flat.
I'd have thought It'd be an issue with the software/firmware seeing as that was what I had been messing around with.
I never had the problem with cyanogenmod, but cyanogenmod was before I started playing with things I shouldn't have.
Yes, its a common problem with the S4 that the battery becomes damaged. I think that if you replace your battery your phone will be working again. Because a swollen battery is a damaged one.
You could also claim warranty for your battery. Samsung already stated that some S4 were shipped with faulty baterys and that they will replace them for free.
Lennyz1988 said:
Yes, its a common problem with the S4 that the battery becomes damaged. I think that if you replace your battery your phone will be working again. Because a swollen battery is a damaged one.
You could also claim warranty for your battery. Samsung already stated that some S4 were shipped with faulty baterys and that they will replace them for free.
Click to expand...
Click to collapse
Even though I've now voided my knox warranty?
Yes even then. I think you will only have to send the battery in to Samsung
And besides, I see you live in the UK. Under European Law the shop has to replace the battery for you and rooting etc does never void your rights.
Hi. I have a Samsung Galaxy 5s SM-900S. I discovered after buying it that it is a clone. Oh well!
I rooted it using Root Genius (Chinese) from Shuame download.
It was working great. Then I deleted some bloatware apps, and disabled others.
After that, all hell broke loose. I was stuck in a flash screen boot loop.
A techie friend put the phone in download mode, and it was able to open up, but no home page.
Then he downloaded Nova launcher, and I got my home page back.
But it was a slightly different home page.
The phone originally said 900T (under- about device), but I know it is G900S (from 3 apps that display the phone specs).
Now it says G900.
The problems now are:
1. my phone dialer disappeared. I downloaded another, but it wont ring when a call comes in
2. Every few minutes when doing anything, I get a message- Unfortunately, the process android process.acore has stopped.
I then must press the ok button to continue.
Can anyone help me? Do I need to flash a new ROM?
I don't wantto reset to factory settings if I can avoid it.
I am a newbie. But I learn fast.
Any help will be greatly appreciated!
Arnele
arnele said:
Hi. I have a Samsung Galaxy 5s SM-900S. I discovered after buying it that it is a clone. Oh well!
I rooted it using Root Genius (Chinese) from Shuame download.
It was working great. Then I deleted some bloatware apps, and disabled others.
After that, all hell broke loose. I was stuck in a flash screen boot loop.
A techie friend put the phone in download mode, and it was able to open up, but no home page.
Then he downloaded Nova launcher, and I got my home page back.
But it was a slightly different home page.
The phone originally said 900T (under- about device), but I know it is G900S (from 3 apps that display the phone specs).
Now it says G900.
The problems now are:
1. my phone dialer disappeared. I downloaded another, but it wont ring when a call comes in
2. Every few minutes when doing anything, I get a message- Unfortunately, the process android process.acore has stopped.
I then must press the ok button to continue.
Can anyone help me? Do I need to flash a new ROM?
I don't wantto reset to factory settings if I can avoid it.
I am a newbie. But I learn fast.
Any help will be greatly appreciated!
Arnele
Click to expand...
Click to collapse
I'm just going to let you know right now... You're not going to get support in an official device thread for a clone.
I`m sorry you got scammed mate, try to get your money back or file a police report for fraude if the device was advertised as a genuine Galaxy S5.
There is no support for this (also not by the manufacturer) device and even finding a working rom wil be very difficult.
Good luck and hope you learn from this, if it sounds to be too good to be true, it usualy is
Sad to say, but he's pretty much out of luck. Scammers know they're selling a phone that's not genuine, so chances of getting money back are slim to none. Police also don't care. If you bought it with cash just take this as a life lesson, because there's pretty much nothing else you can do.