Useful info : Latest Lineage Os version for Pie
pico gapps
Magisk 18.0
I do not have Xposed
Basically I can't get the safety net to pass for the cts profile even though I'm still able to use snapchat and Netflix I cannot get Google pay to work as it comes up with a you are rooted error and magisk hide doesn't work on it. Any help?
Related
Trying to pass safetynet to use my banks app and pokemon go, using the latest LOS14.1
I tried going the Magisk way, but it still fails CTS.
Is there anyway to make it happen with root and passing safetynet?
You have to use Magisk for root. SuperSU and LineageOS's versions of root will not pass safetynet from my experience. I don't know if it helps but I also have the Play Store and Nintendo's games enabled on Magisk Hide.
eMadman said:
You have to use Magisk for root. SuperSU and LineageOS's versions of root will not pass safetynet from my experience. I don't know if it helps but I also have the Play Store and Nintendo's games enabled on Magisk Hide.
Click to expand...
Click to collapse
I used this guide and it didn't work. Is there another MagiskSU that I'm missing?
EDIT: I got it to work! In the guide above, it says to flash SU in Systemless mode. I just flashed Magisk without SU and it worked! Thanks!
You need Magisk v12 and kernel that includes bootloader status patch. I'm using old version of AX7Kernel, but Beastmode also has it. Not sure about other ones. I'm running relatively recent build and using Android Pay pretty frequently.
@edit And make sure to enable Magisk Hide
I'm currently running stock rom with Blu_spark kernel. I've been using magisk, lately updated to 14.3 version.
My problem is I can not pass SafetyNet check. Both ctsProfile and basicIntegrity are false.
I tried Universal SaftyNet Fix but it didn't help at all.
Is there any hope to pass it on stock rom?
Do you have Xposed installed?
Thanks, I completely forgot about it
The other safety net problem people are currently having with Magisk is that if you update Magisk within Magisk Manager some scripts needed to pass safety net are no longer installed by default. If you flash Magisk instead through TWRP it seems to install like normal and you don't need to perform additional steps to pass safety net.
Hi All,
I have been running Lineage OS since it became available for OnePlus 5 with the Safety Net successfully being passed using Magisk and using firmware and modems from jamal2367.
That was up until Lineage required an updated firmware/modem to 5.1.4 and I found jamal2367 has stopped doing the firmware and modem for the OnePlus 5. I installed the firmware from shadowstep the new firmware provider and now I fail the safety net checks.
I have tired the following:
Flashing multiple weekly releases of Lineage OS
Flashing new version of TWRP
Flashing new version of TWRP blu_spark
Flashing new version of TWRP codeworkx
Flashing the ElementalX-OP5-3.10.zip
Flashing Boeffla-Kernel-2.0
Flashing blu_spark_r132
Flashing OSS 5.1.4
Flashing OSS 5.1.5
all with Magisk 17.1 installed
All with full wipes including the sdcard
The only thing that worked was installing OSS 5.1.5 with and relocking the bootloader.
Does anybody know what I have missed and how I can get the Safety Net to pass the ctsProfile.
Thanks in advance.
alrighte_then said:
Does anybody know what I have missed and how I can get the Safety Net to pass the ctsProfile.
Thanks in advance.
Click to expand...
Click to collapse
Relocking the Bootloader will of course work but you didn't need to do that.
What you missed:
That version of Magisk is clearly not working well with your setup and not hiding your Bootloader state properly. (Providing you set it up correctly).
Had you done all those steps without Magisk it would have passed. The custom Kernels alone would have gotten you a Pass due to them ignoring the Verified Boot state.
So, LOS+Kernel = Pass. If you need Magisk, try to find a version that is working properly with your setup. With Magisk working properly the custom Kernel is then optional.
Also, TWRP has nothing to do with it. Just use the latest Codeworkx.
Hi Dirk,
Thanks for your response, I have just tied to install it in the order you suggested
I install TWRP (twrp-3.2.3-0-20180822-codeworkx-cheeseburger.img)
I wiped everything including sdcard
I installed Element Kernel (ElementalX-OP5-3.10.zip)
I installed Lineage OS (lineage-15.1-20180903-nightly-cheeseburger-signed.zip)
I installed Gapps (MindTheGapps-8.1.0-arm64-20180808_153856.zip)
I installed a safety net tester called safetyNet 'attest'
When I run the safetynet test I am still getting CTS profile match: false.
Any ideas what I can do next to make this work?
Thanks for any help
alrighte_then said:
Hi Dirk,
Thanks for your response, I have just tied to install it in the order you suggested
I install TWRP (twrp-3.2.3-0-20180822-codeworkx-cheeseburger.img)
I wiped everything including sdcard
I installed Element Kernel (ElementalX-OP5-3.10.zip)
I installed Lineage OS (lineage-15.1-20180903-nightly-cheeseburger-signed.zip)
I installed Gapps (MindTheGapps-8.1.0-arm64-20180808_153856.zip)
I installed a safety net tester called safetyNet 'attest'
When I run the safetynet test I am still getting CTS profile match: false.
Any ideas what I can do next to make this work?
Thanks for any help
Click to expand...
Click to collapse
You flashed the Kernel before the ROM, so you overwrote that Kernel with the LOS one. Flash LOS then the custom Kernel.
On Magisk.. i've seen many people complain that they can't get the latest version to pass Safetynet. Again, it could just be people not configuring it correctly, or it might be better to try the previous version. Just to make sure you should tell us what you do to set it up.
You need to Hide Play Store, Banking Apps etc, and Magisk Manager too i believe. If you install Magisk and set it up when your current state is 'Uncertified', you will need to clear Data/Cache on Play Store for it to change to 'Certified'.
Also, don't rely on 'Safetynet Checker' apps. If the Play Store settings say 'Certified' try an app like Google Pay. It should work fine.
If you get cts profile mismatch. Download CTS props config from magisk modules and you will pass
Download magisk 17.1
Hi All,
Just to give you an update one where I got to with this.....
You where right the newer builds of Lineage OS do not pass safety net but the older ones do.
So after much playing around I and many flashes and wipes I found it impossible to boot a Lineage with a custom kernel, I believe this is probably down to the forced encryption.
The thing that worked for me in the end was installing "MagiskHide Props Config" and changing the figure print, I am it is very similar to the module Jamie suggested.
So I now have Lineage OS working fully with root, magisk and passing SafetyNet
Thanks everyone for you help.
The thing that worked for me in the end was installing "MagiskHide Props Config" and changing the figure print, I am it is very similar to the module Jamie suggested.
So I now have Lineage OS working fully with root, magisk and passing SafetyNet
Thanks everyone for you help.[/QUOTE]
Hello; can you explain to me in detail, step by step, how to do it? Thanks in advance.
" changing the figure print"
Magisk shows Cts Profile False, Basic Integrity False tries every solution available on the web also downloaded Magisk Hide Module, Turn On Magisk Hide in Magisk Manager, Turn Core Only Mode, Insalled Osmosis Busy Box, Changed Fingerprint of device etc all failed to pass safety net due to this i am unable to use Snapchat, Like Magic App, Netflix etc
Any resolution with this problem?
I can get root and the root hide from Magisk to work on the stock rom; but I've installed CyanogenMod 14.1 (android 7.1.1, rooted) and I have not found a way for the ctsProfile or Basic Integrity to pass. Magisk does continue to hide the root, but there are still apps that look for those two and I have found no resolution other than going back to stock rom with root (which is okay, but the custom mod is better).
Let me know.
For some reason I can't by bypass the safetynet the error is cts profile match = fail.
I installed the magisk 24.1, activate zygist and listed all the apps I don't want to know I have root + play services and play store then I activate the module universal safetynet fiz the I reboot but still I can't bypass the safetynet. I missed something? Or is a rom thing?
Ps I downloaded the rom from the lineageOS web site.
batata312 said:
For some reason I can't by bypass the safetynet the error is cts profile match = fail.
I installed the magisk 24.1, activate zygist and listed all the apps I don't want to know I have root + play services and play store then I activate the module universal safetynet fiz the I reboot but still I can't bypass the safetynet. I missed something? Or is a rom thing?
Ps I downloaded the rom from the lineageOS web site.
Click to expand...
Click to collapse
Try the Universal SafetyNet Fix module.
You can also refer to this thread for more assistance with Magisk.