Magisk shows Cts Profile False, Basic Integrity False tries every solution available on the web also downloaded Magisk Hide Module, Turn On Magisk Hide in Magisk Manager, Turn Core Only Mode, Insalled Osmosis Busy Box, Changed Fingerprint of device etc all failed to pass safety net due to this i am unable to use Snapchat, Like Magic App, Netflix etc
Any resolution with this problem?
I can get root and the root hide from Magisk to work on the stock rom; but I've installed CyanogenMod 14.1 (android 7.1.1, rooted) and I have not found a way for the ctsProfile or Basic Integrity to pass. Magisk does continue to hide the root, but there are still apps that look for those two and I have found no resolution other than going back to stock rom with root (which is okay, but the custom mod is better).
Let me know.
Related
I followed the directions about rooting with Magisk 11.6 and everything went well, root privileges work, and in general no problems.
However, I noticed on Magisk Manager that SafetyNet fails with a CTS profile mismatch and running SafetyNet Test says that basic integrity fails. I wouldn't particularly care, except that I have one app (Samsung Pay) that is failing to start because it detects root. (Yes, I've hidden it with MagiskHide).
Do any other magisk rooters out there have the SafetyNet problem? Are there some log files I could look at and provide to help track it down?
I've been trying very hard to pass safety net on my axon 7, I first tried when I had LineageOS, Magisk and Xposed (not systemlessly installed) and a few other tweaks that appeared to modify the system partition, then after realising they may be affecting safety net I completely wiped my device (data,cache,system) to make sure I had a completely fresh start. Then proceeded to flash the MicroG version of LineageOS, and install Magisk and Xposed Systemlessly making sure nothing I did affected the system partition. So I thought I would be set, did safety net check andddd it failed. Then I did some searching and found safety net will check for bootloader unlocked status, so I found a kernel (HELLSGATE.V1) which tricks safety net (or is supposed to) into believing bootloader is still locked. And safety net still fails, this is really annoying I'm just wanting to use Android Pay yet I can't. Does anyone have any idea as to what would be tripping safety net in my case, or how they manage to pass on their device?
Spooderman46 said:
I've been trying very hard to pass safety net on my axon 7, I first tried when I had LineageOS, Magisk and Xposed (not systemlessly installed) and a few other tweaks that appeared to modify the system partition, then after realising they may be affecting safety net I completely wiped my device (data,cache,system) to make sure I had a completely fresh start. Then proceeded to flash the MicroG version of LineageOS, and install Magisk and Xposed Systemlessly making sure nothing I did affected the system partition. So I thought I would be set, did safety net check andddd it failed. Then I did some searching and found safety net will check for bootloader unlocked status, so I found a kernel (HELLSGATE.V1) which tricks safety net (or is supposed to) into believing bootloader is still locked. And safety net still fails, this is really annoying I'm just wanting to use Android Pay yet I can't. Does anyone have any idea as to what would be tripping safety net in my case, or how they manage to pass on their device?
Click to expand...
Click to collapse
Xposed is causing safetynet to fail. No matter how Xposed is installed, it will always trigger safetynet. But with systemless xposed, you can disable xposed in the xposed installer app by toggling it at the top and rebooting
Teet1 said:
Xposed is causing safetynet to fail. No matter how Xposed is installed, it will always trigger safetynet. But with systemless xposed, you can disable xposed in the xposed installer app by toggling it at the top and rebooting
Click to expand...
Click to collapse
Still get 'invalid response' through magisk manager even after disabling xposed
This is why mine stayed stock......
Normally I would at least unlock, install TWRP and root to de-bloat, install V4A and maybe Xposed. Had to wean myself off those mods on this phone but used to it now. Life is much simpler
Nougat is pretty good. Be nice to see Oreo official soon.
Spooderman46 said:
Still get 'invalid response' through magisk manager even after disabling xposed
Click to expand...
Click to collapse
Safetynet doesn't check the bootloader. Look I can even pass safetynet while dualbooting LOS. Just wipe system and install LOS, OpenGApps and Magisk, maybe some other mod like the AK4490 patch and Viper4ARISE. That definitely will pass safetynet.
After a long time using SuperSU, I switched to Magisk yesterday, for it's modules and of course Magisk Hide. So, starting with a full stock B414 rom, I unlocked my BL, installed OldDroid's TWRP and flashed Magisk 16.0 .
Everything went fine, I'm able to give root access to my apps. What I'm trying to do now is passing SafetyNet check.
I downloaded SafetyNet "attest" from the store and ran a test -> Basic integrity : false and CTS profile match -> false :crying:
Reading various tutorials, I enabled magisk hide, selected a few google apps to hide (store, services framework) , enabled Host systemless and magisk Core (rebooted my phone between these changes), cleared Store data. Regardless of what I've done, I keep failing at SafetyNet check. Did I miss something basic ? Did someone manage to pass safetynet on a P9 Lite with Nougat ?
EinderJam said:
After a long time using SuperSU, I switched to Magisk yesterday, for it's modules and of course Magisk Hide. So, starting with a full stock B414 rom, I unlocked my BL, installed OldDroid's TWRP and flashed Magisk 16.0 .
Everything went fine, I'm able to give root access to my apps. What I'm trying to do now is passing SafetyNet check.
I downloaded SafetyNet "attest" from the store and ran a test -> Basic integrity : false and CTS profile match -> false :crying:
Reading various tutorials, I enabled magisk hide, selected a few google apps to hide (store, services framework) , enabled Host systemless and magisk Core (rebooted my phone between these changes), cleared Store data. Regardless of what I've done, I keep failing at SafetyNet check. Did I miss something basic ? Did someone manage to pass safetynet on a P9 Lite with Nougat ?
Click to expand...
Click to collapse
Hello,
i used it some times ago...
Try to enable usb-debugging together with magisk/hide,
then reboot and see what happen.. ( this is what i done )
All the best
Thanks for your answer ! However, it didn't changed anything, safetynet check failed. Interesting fact, after rebooting, both magisk hide and usb debugging are disabled... Is this normal ?
EDIT : It's more than that, usb debugging gets disabled as soon as I quit settings
managed to fix this using another xda thread, but safetynet keeps failing and magisk hide is always disabled on startup
https://twitter.com/topjohnwu/status/1029239685338419200
Hi. I have a safety net issue after following the rooting tutorial on this post. (to be precise, safety net was fine, i got the issue when i tried to install edexposed)
I've got a "cts profile mismatch".
I tried to get rid of it, uninstall magisk, wipe system, but it's still there.
I would like to try to make a factory reset using an ota file, but i can't find my version of the system.
I was on SKYW1907110OS00MP3 and i updated to SKYW1911010OS00MP5. Does someone have a factory ota update.zip for one of this two version ?
There is the MagiskHide Props Config module ( https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228 ) for fixing this kind of issue, but there is no build-in fingerprint for the blackshark 2.
I tried to get one within an OTA file, but i can't find it.
I really don't know if i can do a << adb push stock_boot_b.img /dev/block/bootdevice/by-name/boot_b >> to restore the unpatched version of my rom or if that will brick my phone (or maybe do nothing to solve my issue)
If anyone have an idea, it would be great. Thanks.
Flashing the stock boot image of the ROM currently installed in your device will not cause bootloop. Tried and tested.
To pass Safetynet, you don't need to flash MagiskHide Props Config module. It doesn't really make your device pass Safetynet at all.
To pass Safetynet with EdXposed, follow these steps:
1. Make sure you enable Magisk Hide in the Magisk app.
2. Rename your Magisk package (optional - for banking apps).
3. Flash the latest EdXposed module from this repo: https://ci.appveyor.com/project/ElderDrivers/edxposed/history (the EdXposed in the Magisk app is outdated, and it breaks Safetynet), and the latest EdXposed Manager here: https://github.com/ElderDrivers/EdXposedManager
4. Go to EdXposed Manager's settings and enable App List mode and Pass SafetyNet options, then reboot your device.
Now, the trickiest part (sort of):
5. Clear Google Services Framework, Google Play services, and Google Play Store's data, then check for Safetynet. Sometimes, it still fails after your first attempt so just repeat this step until it passes Safetynet.
That's all. All of these worked 100% on my CN-converted-to-Global Black Shark 2 device. Hope it will work on yours, too.
Woot, thanks a lot, i will try that right away.
Hello fellas, i flashed my p10 lite with DarkJoker360 Rom (Lineage 17.10) and almost everything working fast without problems, actually phone is 2-3 times faster than original firmware.
About my problem now (SafetyNet):
DarkJoker360 suggest to root phone with Magisk 19.4 (phh) and this version of magisk works, i can use super user access on terminal, phone can pass safety net basic integrity but fails on CTS profile.
No matter if i spoof fingerprint with props editor or force basic check, the cts profile will always fail.
Last week tried every combination of SafetyNet fixer and props editor without success, basic integrity passes but CTS profile fails.
So...
I upgraded magisk to versions 20.4, 21 and to the latest version 23 and every version of magisk works as expected, root works, root based apps works, magisk hide works (root apps can't detect root when ticked on magisk hide) but with versions bigger that 19.4 cts fails among with basic integrity.
So with magisk 19,4 i can't pass CTS Profile test
...with magisk 20+ i can't pass Basic Integrity and CTS Profile test.
I tried 2-3 twrp builds, every signle version of SafetyFixer (even modded ones).
What i missing guys? Thanks.