Related
Hey there. So today I found out that on S7 is FRP (Factory Reset Protection). My phone is ok, I am just asking.
Can it be removed by flashing clean FW via Odin?
Thanks for any response.
Hey Kubas, to answer your question...yes flash new firmware via Odin.
Kubas_inko_CZ said:
Hey there. So today I found out that on S7 is FRP (Factory Reset Protection). My phone is ok, I am just asking.
Can it be removed by flashing clean FW via Odin?
Thanks for any response.
Click to expand...
Click to collapse
As far as I am aware, it won't be removed. In Odin it will fail the flashing process. I know this from the Galaxy Note 3 where if FRP/activation lock is active, it won't be able to do anything in Odin. Will be a straight 'FAIL'.
I'm sure the same applies to new Samsung models too
-sohail said:
As far as I am aware, it won't be removed. In Odin it will fail the flashing process. I know this from the Galaxy Note 3 where if FRP/activation lock is active, it won't be able to do anything in Odin. Will be a straight 'FAIL'.
I'm sure the same applies to new Samsung models too
Click to expand...
Click to collapse
And do you know about any other way?
-sohail said:
As far as I am aware, it won't be removed. In Odin it will fail the flashing process. I know this from the Galaxy Note 3 where if FRP/activation lock is active, it won't be able to do anything in Odin. Will be a straight 'FAIL'.
I'm sure the same applies to new Samsung models too
Click to expand...
Click to collapse
Well last week I was un-checking stuff in Dev Mode, I and accidentally hit oem unlock then rebooted my phone (as I had installed a new rom), then all I got was the FRP message, so I reflashed stock firmware and it worked for me...albeit VERY slowly, then had to re-root my phone etc.
Hugo.
BTW...if you haven't backed up your phone, you'll have to start the whole process of setting up your phone as if it were brand new, I on the other hand had backed up my phone so I was lucky, but I do know of people who haven't.
Hi,
I did a search here for anything to do with (SM-G950W) and saw 10 threads about this model but I am unable to find a thread that has a solution to my problem. I have read posts about using Odin v3.12.7 and putting the phone into download mode then flash the PDA (now called AP) with a combination .MD5 file that is compatible for (SM-G950W). I tried flashing with a stock AP, one from a stock SM-G950U and several others that I have found from Google search and all I get from Odin is "SW REV CHECK FAIL : [abl]Fused 2 > Binary 1". I made sure I had the latest version (as of writing this post) of the Samsung USB Driver with version 1.5.63.0 so does anyone know how I can bypass the FRP (factory reset protection)? I see lots of Youtube videos about using a bluetooth device and calling emergency but I will avoid this method. I should also mention that the "download" screen does show FRP lock enabled if that matters (is this KNOX?).
I am trying to help my friend fix this problem because he locked himself out of his phone so I am out of ideas and for whatever reason he does not remember the last Google account that was synced with his phone. We tried all the emails that "he" thinks it is and when we put in his cell phone # the recovery said it will send us the verification code but it fails.
Any help would be appreciated and thanks to those who replied.
EDIT:
I got Odin to flash the phone now. I had to use Canada (Rogers), version 7.0, PDA - (G950WVLU2AQK7), CSC - (G950WOYA2AQK7), date 2017-12-10 from SamMobile website. I wanted to flash the XAC version to remove Rogers branding but I kept getting the "SW REV CHECK FAIL : [abl]Fused 2 > Binary 1" error. Anyway, the phone rebooted back to FRP (factory reset protection) screen to enter a Google account. So back to square one unless someone knows which file I need to flash in order to bypass or unlock FRP.
Thanks,
htcraspy said:
Hi,
I did a search here for anything to do with (SM-G950W) and saw 10 threads about this model but I am unable to find a thread that has a solution to my problem. I have read posts about using Odin v3.12.7 and putting the phone into download mode then flash the PDA (now called AP) with a combination .MD5 file that is compatible for (SM-G950W). I tried flashing with a stock AP, one from a stock SM-G950U and several others that I have found from Google search and all I get from Odin is "SW REV CHECK FAIL : [abl]Fused 2 > Binary 1". I made sure I had the latest version (as of writing this post) of the Samsung USB Driver with version 1.5.63.0 so does anyone know how I can bypass the FRP (factory reset protection)? I see lots of Youtube videos about using a bluetooth device and calling emergency but I will avoid this method. I should also mention that the "download" screen does show FRP lock enabled if that matters (is this KNOX?).
I am trying to help my friend fix this problem because he locked himself out of his phone so I am out of ideas and for whatever reason he does not remember the last Google account that was synced with his phone. We tried all the emails that "he" thinks it is and when we put in his cell phone # the recovery said it will send us the verification code but it fails.
Any help would be appreciated and thanks to those who replied.
EDIT:
I got Odin to flash the phone now. I had to use Canada (Rogers), version 7.0, PDA - (G950WVLU2AQK7), CSC - (G950WOYA2AQK7), date 2017-12-10 from SamMobile website. I wanted to flash the XAC version to remove Rogers branding but I kept getting the "SW REV CHECK FAIL : [abl]Fused 2 > Binary 1" error. Anyway, the phone rebooted back to FRP (factory reset protection) screen to enter a Google account. So back to square one unless someone knows which file I need to flash in order to bypass or unlock FRP.
Thanks,
Click to expand...
Click to collapse
Use a tool like chimera tool you'll be able to get past that no problem. Should be able to anyway. 99% of people on these forums will automatically brand you a thief because nobody here apparently forgets their login account info and are otherwise perfect citizens
Try this guide http://www.techoxygen.com/samsung-frp-tool-2017-reset-frp-lock-free/
thatsupnow said:
Use a tool like chimera tool you'll be able to get past that no problem. Should be able to anyway. 99% of people on these forums will automatically brand you a thief because nobody here apparently forgets their login account info and are otherwise perfect citizens
Try this guide http://www.techoxygen.com/samsung-frp-tool-2017-reset-frp-lock-free/
Click to expand...
Click to collapse
First off, thank you for being helpful. I even invited myself to the telegram group "Galaxy S8/S8+ (XDA Group)" to ask for help there too and some people was not as helpful by telling us that it would be impossible to forget the login. Seriously, I could have laughed at my friend and call him dumb but I didn't because he came to me for help. I searched and read so many forums and downloaded so many different files from legal websites to understand what to do but I couldn't get it resolved.
I will try the "chimera" tool that you suggested and if that doesn't work then we will just give up and bring the phone to a repair shop. I spoke to someone at Google today who said gmail password resets may take up to 24 hours for the phone to recognize. So we will try again with the 3 gmail accounts that we think was synced with the phone tomorrow because the passwords was just reset today however the representative said Samsung might be able to help so he transferred us to the Samsung in the U.S. (by mistake?) and the girl from Samsung transferred us to Samsung Canada. What a run around; anyway the last person said we may need to bring it to a repair shop. The person asked us for our postal code and gave us a few shops in our area.
Crossing our fingers that the "chimera" tool works otherwise we're probably looking at $50-$60 CAD for the phone repair shop to fix this issue.
Thanks again!
thatsupnow said:
Use a tool like chimera tool you'll be able to get past that no problem. Should be able to anyway. 99% of people on these forums will automatically brand you a thief because nobody here apparently forgets their login account info and are otherwise perfect citizens
Try this guide http://www.techoxygen.com/samsung-frp-tool-2017-reset-frp-lock-free/
Click to expand...
Click to collapse
So I installed chimera and it doesn't list SM-G950W as an available model to reset the FRP. Do I need an update or do I need to buy something to get more supported models? Also I looked at "http://www.techoxygen.com/samsung-fr...frp-lock-free/" and downloaded the "Octoplus Samsung Tool" the download file came with a trojan virus which got removed by antivirus program. Now when I try to open the Octoplus tool it is saying that the "Card is not found". What does that mean? Sorry I never done this before so I am not familiar with these terms.
htcraspy said:
So I installed chimera and it doesn't list SM-G950W as an available model to reset the FRP. Do I need an update or do I need to buy something to get more supported models? Also I looked at "http://www.techoxygen.com/samsung-fr...frp-lock-free/" and downloaded the "Octoplus Samsung Tool" the download file came with a trojan virus which got removed by antivirus program. Now when I try to open the Octoplus tool it is saying that the "Card is not found". What does that mean? Sorry I never done this before so I am not familiar with these terms.
Click to expand...
Click to collapse
Give this a shot
If that doesn't work go to YouTube and search bypass frp lock SM-G950W. You'll get it eventually
thatsupnow said:
Give this a shot
If that doesn't work go to YouTube and search bypass frp lock SM-G950W. You'll get it eventually
Click to expand...
Click to collapse
Thanks for your help. We tried watching the videos but our Samsung S8 does not have a home button. Anyway, we decided to go to a local phone repair shop and they charged us $80 to reset the lock. We had to wait a bit because the Samsung server was down but at least we got our phone working again.
Also if anyone is wondering about the chimera tool and support for Samsung S8 this is the response I got from their support team:
Dear User,
Yes, currently it is not supported. The FRP reset is not added for the S8 models.Of course we will add it, in the near future. When? right now i can not tell you exact date, but i am sure that we can handle it soon.
Best regards,
Chimera team
htcraspy said:
Thanks for your help. We tried watching the videos but our Samsung S8 does not have a home button. Anyway, we decided to go to a local phone repair shop and they charged us $80 to reset the lock. We had to wait a bit because the Samsung server was down but at least we got our phone working again.
Also if anyone is wondering about the chimera tool and support for Samsung S8 this is the response I got from their support team:
Dear User,
Yes, currently it is not supported. The FRP reset is not added for the S8 models.Of course we will add it, in the near future. When? right now i can not tell you exact date, but i am sure that we can handle it soon.
Best regards,
Chimera team
Click to expand...
Click to collapse
Right on at least you got it going again. I just kinda assumed chimera tool supported that cause I've been using it for years on my other galaxy phones and was unlocking a whole bunch of other phones for $10 a pop.
I have same problem with my sm-g950w and don't want to pay 80$ at phone repair shop
hopefully if I wait a little, more option will become available for the frp reset
if anyone has any more options, please let me know
thatsupnow said:
Use a tool like chimera tool you'll be able to get past that no problem. Should be able to anyway. 99% of people on these forums will automatically brand you a thief because nobody here apparently forgets their login account info and are otherwise perfect citizens
Try this guide http://www.techoxygen.com/samsung-frp-tool-2017-reset-frp-lock-free/
Click to expand...
Click to collapse
It's not that everyone thinks that, it's that there is no way to tell from a forum post, and rather than risk making xda complicit in a felony it's safer and fairer to just not answer any of them on the board where there is an official record. Just wait until some judge subpones all of xdas servers because they hold official records in an ongoing criminal case
htcraspy said:
Hi,
I did a search here for anything to do with (SM-G950W) and saw 10 threads about this model but I am unable to find a thread that has a solution to my problem. I have read posts about using Odin v3.12.7 and putting the phone into download mode then flash the PDA (now called AP) with a combination .MD5 file that is compatible for (SM-G950W). I tried flashing with a stock AP, one from a stock SM-G950U and several others that I have found from Google search and all I get from Odin is "SW REV CHECK FAIL : [abl]Fused 2 > Binary 1". I made sure I had the latest version (as of writing this post) of the Samsung USB Driver with version 1.5.63.0 so does anyone know how I can bypass the FRP (factory reset protection)? I see lots of Youtube videos about using a bluetooth device and calling emergency but I will avoid this method. I should also mention that the "download" screen does show FRP lock enabled if that matters (is this KNOX?).
I am trying to help my friend fix this problem because he locked himself out of his phone so I am out of ideas and for whatever reason he does not remember the last Google account that was synced with his phone. We tried all the emails that "he" thinks it is and when we put in his cell phone # the recovery said it will send us the verification code but it fails.
Any help would be appreciated and thanks to those who replied.
EDIT:
I got Odin to flash the phone now. I had to use Canada (Rogers), version 7.0, PDA - (G950WVLU2AQK7), CSC - (G950WOYA2AQK7), date 2017-12-10 from SamMobile website. I wanted to flash the XAC version to remove Rogers branding but I kept getting the "SW REV CHECK FAIL : [abl]Fused 2 > Binary 1" error. Anyway, the phone rebooted back to FRP (factory reset protection) screen to enter a Google account. So back to square one unless someone knows which file I need to flash in order to bypass or unlock FRP.
Thanks,
Click to expand...
Click to collapse
Ok trying to help here, if you already flashed the phone with version 7 its means will get easy to bypass the G account, just there are a lot of videos on you tube but the easiest one is in spanish.. (freedom phone) the name of the you tuber, if not there are more in english..
Android 7 allow you to update the keyboard which is necessary in order to complete the task, it will take just 10 minutes I did one T mobile but it will work with the canadian one as long as the phone has the version 7.. btw i am downloading the rogers firmware to flash my canadian one.. thanks for the tip..
XDA never encourages this "fishy" applications for some really really desperate people that needs help.
Samsung repair centre can fix your FRP Locked phone. Just present your Proof of purchase/receipt/ warranty card and of course your phone
So you can use your phone again.
FRP security is implemented to prevent unauthorized access on your phone.
So make sure you don't forget your main google account logged in on your phone.
It is really recommended that you have "MULTIPLE WAYS" of retrieving your Google account
Make sure your G Account has
(
1. phone number
2. recovery email
3. provided security
4. Q&A
5. Google recovery page ( you need to answer personal info/identity you can remember)
)
htcraspy said:
Hi,
I did a search here for anything to do with (SM-G950W) and saw 10 threads about this model but I am unable to find a thread that has a solution to my problem. I have read posts about using Odin v3.12.7 and putting the phone into download mode then flash the PDA (now called AP) with a combination .MD5 file that is compatible for (SM-G950W). I tried flashing with a stock AP, one from a stock SM-G950U and several others that I have found from Google search and all I get from Odin is "SW REV CHECK FAIL : [abl]Fused 2 > Binary 1". I made sure I had the latest version (as of writing this post) of the Samsung USB Driver with version 1.5.63.0 so does anyone know how I can bypass the FRP (factory reset protection)? I see lots of Youtube videos about using a bluetooth device and calling emergency but I will avoid this method. I should also mention that the "download" screen does show FRP lock enabled if that matters (is this KNOX?).
I am trying to help my friend fix this problem because he locked himself out of his phone so I am out of ideas and for whatever reason he does not remember the last Google account that was synced with his phone. We tried all the emails that "he" thinks it is and when we put in his cell phone # the recovery said it will send us the verification code but it fails.
Any help would be appreciated and thanks to those who replied.
EDIT:
I got Odin to flash the phone now. I had to use Canada (Rogers), version 7.0, PDA - (G950WVLU2AQK7), CSC - (G950WOYA2AQK7), date 2017-12-10 from SamMobile website. I wanted to flash the XAC version to remove Rogers branding but I kept getting the "SW REV CHECK FAIL : [abl]Fused 2 > Binary 1" error. Anyway, the phone rebooted back to FRP (factory reset protection) screen to enter a Google account. So back to square one unless someone knows which file I need to flash in order to bypass or unlock FRP.
Thanks,
Click to expand...
Click to collapse
If this helps you i have the SM-G950W (G950WVLS3BRE1) and i made it work by flashing the COMBINATION_FA70_G950USQU3ARD1 first then i flashed the firmware 4 file G950USQU3CRD4 using BL+AP+CP+HOME_CSC+USERDATA and it worked beautifully. Maybe it will help your issue.
Flashing SMG950W
Hi,
I am new to this forum and need some help please.
I have a Samsung S8 (G950WVLU5BRG4) with Android Version 8.0. The phone is unlocked and from Rogers in Canada but has a Google FRP.
Although I followed the step by step instructions with the combination file and so on Odin keeps showing me an error and is unable to bypass the Google account lock. The error message I am getting within log of the combination file is:
FAIL! (Auth)
Complete (Write) operation failed
All threads completed. (succeed 0/ failed 1)
Any idea of how to solve this problem? I am sure it got solved already by someone in the forum but I can't find the right entry.
ThorbenJa said:
Hi,
I am new to this forum and need some help please.
I have a Samsung S8 (G950WVLU5BRG4) with Android Version 8.0. The phone is unlocked and from Rogers in Canada but has a Google FRP.
Although I followed the step by step instructions with the combination file and so on Odin keeps showing me an error and is unable to bypass the Google account lock. The error message I am getting within log of the combination file is:
FAIL! (Auth)
Complete (Write) operation failed
All threads completed. (succeed 0/ failed 1)
Any idea of how to solve this problem? I am sure it got solved already by someone in the forum but I can't find the right entry.
Click to expand...
Click to collapse
Sounds like your flashing something older than what's the device
TheMadScientist said:
Sounds like your flashing something older than what's the device
Click to expand...
Click to collapse
As far as I know canadian S8 variant cannot be downgraded, i had tried everything with them with no avail,
there is a site(server bypassing the google account any model) for 22 usa dollars!! search it.. 22 dollars is nothing if your phone is an xpensive one!!
Virtualisimo said:
As far as I know canadian S8 variant cannot be downgraded, i had tried everything with them with no avail,
there is a site(server bypassing the google account any model) for 22 usa dollars!! search it.. 22 dollars is nothing if your phone is an xpensive one!!
Click to expand...
Click to collapse
No so you need a 950 U combo equal to that of what is on your device
hello,
i managed to get the phone back to get in download mode. stock everything, no root whatsoever. my goal is to root my phone and i have experience doing so but i guess i was just unlucky this time.
i tried searching allover the internet for a fix, searching xda etc.
first off: my device is running oreo 8.0 and it's type is G950FX.
I want to downgrade to 7.0 because FRP lock is on, i did turn on oem lock before starting however i am unable to log in to my old google account connected to my phone.
when i try to flash any bootloader i get SW REV CHECK FAIL DEVICE 2, BINARY 1. i tried almost any trick in the book like downloading 7.0 from sammobile, flashing using odin.
the things i run into when flashing are:
1.can't flash the bootloader, probably because of frp lock.
2. when i don't flash the bootloader for 7.0 i get dm-verity error 0x2.
3. when i only flash 8.0 oreo pda & csc and then flash 7.0 pda on top i do get to boot but i get encryption interrupted error.
4. i am able to boot in 8.0 but can't get past the frp.
i'm out of answers, i really hope anyone can help me out of this situation as i want to use my phone.
Help is much appreciated!
edit: i tried flashing multiple versions of android 7.0 but i keep getting sw rev check fail bootloader device 2 binary 1
i basicly want to do this, a downgrade: https://forums.androidcentral.com/s...s8-plus/878062-how-downgrade-oreo-nougat.html
the problem is i didn't sign out of google or samsung accounts before resetting to factory
You can't. You have a new bootloader v2.
A simple search gives you this answer, if you have u2 and CRED bootloader installed you are stuck. No way to go back anymore.
i'm on u2 and CRED bootloader. i did search for this indeed but i didn't want to give up.
do you think there will be ever be a way to get back into my phone again?
If you have FRP lock good luck. I haven't seen a way yet.
I know it's been 5 months and you've probably either gotten rid of the phone or it's sitting in a dusty bin somewhere, but have you tried Galaxy Reaper? It's a pretty legit FRP bypass tool.
Edit: Scratch that. It's apparently been patched since I last knew it to work. Just wanted to double check, and sure enough..
Hey i couldnt find anything else so i hope this isnt a duplicate,
im somewhat of a noob when it comes to rooting but i know a little bit
Today i rooted my Galaxy s8 , everything whet smooth and without a problem,
but then for some reason i deactivated the OEM unlock and rebooted my phone.
Obviously that locked me out of my phone, after trying to flash my phone with the stock firmware that i downloded through samfirm
i got the error sw rev check fail bootloader device 5 binary 4 and i couldnt get that to work.
My next step was to try the Samsung smart switch emergency recovery, which failed.
I got the error that my device was not supported.
After that my S8 also stared showing me a blueish screen with the message : "An error has occurred while updating the device software....",
i can still access downlod mode tho
At this point i really dont know what to do and i should really be in bed because its 2 in the morning .
I really hope someone can help me out here, thanks in advance and a good night for now.
Hirnvitamin said:
Hey i couldnt find anything else so i hope this isnt a duplicate,
im somewhat of a noob when it comes to rooting but i know a little bit
Today i rooted my Galaxy s8 , everything whet smooth and without a problem,
but then for some reason i deactivated the OEM unlock and rebooted my phone.
Obviously that locked me out of my phone, after trying to flash my phone with the stock firmware that i downloded through samfirm
i got the error sw rev check fail bootloader device 5 binary 4 and i couldnt get that to work.
My next step was to try the Samsung smart switch emergency recovery, which failed.
I got the error that my device was not supported.
After that my S8 also stared showing me a blueish screen with the message : "An error has occurred while updating the device software....",
i can still access downlod mode tho
At this point i really dont know what to do and i should really be in bed because its 2 in the morning .
I really hope someone can help me out here, thanks in advance and a good night for now.
Click to expand...
Click to collapse
Device 5 binary 4 means you are flashing lower version of firmware than what is on your phone. Samsung will let you downgrade ( bootloader ) versions numbers.
You will need to flash a bootloader 5 or higher to fix.
Note: Don't relock oem in developer option.
spawnlives said:
Device 5 binary 4 means you are flashing lower version of firmware than what is on your phone. Samsung will let you downgrade ( bootloader ) versions numbers.
You will need to flash a bootloader 5 or higher to fix.
Note: Don't relock oem in developer option.
Click to expand...
Click to collapse
Thanks for your reply!
That's what I found out too but I couldn't find a "higher" bootloader, I would have thought that if I download it through SamFirm it should have the proper BL
Do you have any recommendations on where to download the proper bootloader?
Yea that was a big f**k up haha
I just tried to get Poke Go to run but it wouldn't let me login because it detected that the Device was rooted I guess and after changing my device fingerprint and adding PokeGo to MagiskHide and still not being able to login I followed some FAQ blindly Wich recommended to turn off OEM unlock, and other things to hide the hardware site or the root, thinking about it again it should have been super obvious that this is a stupid idea, but you are always smarter afterwards right? Haha
spawnlives said:
Device 5 binary 4 means you are flashing lower version of firmware than what is on your phone. Samsung will let you downgrade ( bootloader ) versions numbers.
You will need to flash a bootloader 5 or higher to fix.
Note: Don't relock oem in developer option.
Click to expand...
Click to collapse
Wow I feel stupid, I'm flashing the stock through Odin right now as I type this, I've downloaded 2 firmwares first one was a random one from online second one was the SamFirm , after realizing the first didnt work I must have deleted the samfirm variant by accident, I redownloaded it and now it's working , but thanks for replying!
Hello Everyone,
First of all I am a newbie when it comes to Android, so forgive me for asking such a noob question.
So here is the story, my girlfriend's dad passed away few months ago. He used an old Samsung S8, sadly we do not know what the login pattern is or his Google account password (We did try recovery options but to no avail)
As there was no other option, I went ahead and had the phone factory reset, and from what I learned the phone is now FRP locked.
After a reading a few more guides I downloaded a tool called Odin and some 'Stock ROM' and flashed it hoping that would resolve the issue (Oh boy, how wrong I was) and the phone is now stuck on a screen saying "Error occurred while updating the device software, use the emergency recovery function"
My girlfriend just wanted to be able to use it for some time, and now I feel really bad for screwing it up.
Just wondering what my options are and if the phone is salvageable at all?
Hey, are you sure you downloaded the right ROM for this S8? Since there are two models of this phone, each with a different chipset (Exynos / Qualcomm Snapdragon). I feel like this error could come from a bad firmware? Does Odin still see the phone when you connect it to the PC?
Edit: Apparently people solved this problem using Samsung's Smart Switch on PC.
Yes, I think I downloaded the correct one. The phone is from Telstra Australia and so downloaded the ROM from Samfrew that was listed as Telstra, I typed in the model number which is SM-G950F it is this firmware that came up.
Yes when I put the phone into Recovery mode and connect to PC, Odin detects it, but the flash gets stuck halfway. I've loaded the BL, AP, CP and CSC that came within the ZIP file from Samfrew and under options only ticked 'Auto Reboot' and 'F.Reset Time'
Also tried just with the BL and AP but same deal.
blackslash said:
Also tried just with the BL and AP but same deal.
Click to expand...
Click to collapse
Have you tried Samsung's Smart Switch app on PC? Apparently people successfuly fixed this error with it.
blackslash said:
Also tried just with the BL and AP but same deal.
Click to expand...
Click to collapse
I've never had to deal with a Samsung that has a FRP lock, that could just be the reason why the flashing fails, i wouldn't know. I hope you can get the Factory Reset to work :/
Also tried the Smart Switch app but it would recognize the phone. Thank you for looking into this.
You could send a message to this user "makeyourself" : https://forum.xda-developers.com/t/i-think-i-screwed-the-pooch-on-this-one.3939572/post-79729654 , he seems aware about the FRP locks / flashing issues.
Good luck with your S8.
@Derbi75 thanks heaps, will message makeyourself now.
Ideas? Anyone?
blackslash said:
Ideas? Anyone?
Click to expand...
Click to collapse
From what I know, the error only appears if the phone was interrupted during flashing. Such as, Odin was writing into phone but you probably removed the USB or stuff. The screen you see is actually download mode. It is just renamed. Try plugging in your device when it's on the error screen then re-flash it.