Database Users

Custom binary blocked by frp lock

need urgent help really.
my phone has been rooted and has twrp installed for months now with no issues, all of a sudden my phone rebooted to the samsung logo screen with the mentioned error message. i have no idea how and why this error has occured but my phone wont boot to system. i really dont want flash stock firmware as i havent backed things up, is there a way to fix this issue with out doing a full wipe?

you might have accidentally disable oem unlock. so phone is bricked , and you need to flash stock firmware with odin , no other choices . and as you know knox counter will stay 0x1 , root or no root, once you break knox its permanent as knox is hardware, once you root it break an electronic fuse so once you flash stock firmware I really suggest you to install custom rom and twrp again as many things will be blocked if you stay on stock firmware as your device will stay marked as " rooted "

robhug said:
you might have accidentally disable oem unlock. so phone is bricked , and you need to flash stock firmware with odin , no other choices . and as you know knox counter will stay 0x1 , root or no root, once you break knox its permanent as knox is hardware, once you root it break an electronic fuse so once you flash stock firmware I really suggest you to install custom rom and twrp again as many things will be blocked if you stay on stock firmware as your device will stay marked as " rooted "
Click to expand...
Click to collapse
Yeah I had to do firmware install in the end. It's just crazy though. I very rarely go into dev options, I had noto kernel installed and everything on stock aqh3, rooted with magisk and everything worked great, so annoying as this happened at 3am and I have slow internet connection and took me 2 hours to download the 3.5gb firmware file. Urgh o was on the verge of installing a custom rom too, ah well good job I had a lot of stuff saved in Samsung cloud.

sofir786 said:
Yeah I had to do firmware install in the end. It's just crazy though. I very rarely go into dev options, I had noto kernel installed and everything on stock aqh3, rooted with magisk and everything worked great, so annoying as this happened at 3am and I have slow internet connection and took me 2 hours to download the 3.5gb firmware file. Urgh o was on the verge of installing a custom rom too, ah well good job I had a lot of stuff saved in Samsung cloud.
Click to expand...
Click to collapse
yes hopefully cloud is our new god ^^ yes its annoying I agree but its also a great feeling to begin with a clean phone like new after a reset , and I have also a crappy download speed so yes its a pain to download 4gb , and even better when its corrupted and need to download agin good luck with your device

Hey guys I need help.
My phone got bricked as you said (I accidentally turned off OEM unlock on my rooted phone) so I tried to flash stock firmware, but odin fails and on my phone it says (sw rev. check fail. device:3 binary:2). Plz help!
My phone: S8+
FIRMWARE: CRF7
FRP LOCK: ON
OEM LOCK: ON

Just had the very same problem meself ?
Thank god for Odin and https://updato.com/
Bt like previous posters says its like havin a new phone apart from samsung pay not working

Can someone help??
I got the "FRP lock" on my Samsung S8 (Exynos) and tried to flash Stock Oreo but Odin fails and the device shows "KERNEL REV. CHECK FAIL. DEVICE:3 BINARY:2".
This stock Samsung Rom worked earlier today so it should be the right Rom for my phone.
Also tried to flash TWRP recovery via AP in Odin which failed with "RFP lock" message showing on the device..
I tried to add a snapshot here but couldn't.
Anyone please, I'm helpless..

nattyniz said:
Can someone help??
I got the "FRP lock" on my Samsung S8 (Exynos) and tried to flash Stock Oreo but Odin fails and the device shows "KERNEL REV. CHECK FAIL. DEVICE:3 BINARY:2".
This stock Samsung Rom worked earlier today so it should be the right Rom for my phone.
Also tried to flash TWRP recovery via AP in Odin which failed with "RFP lock" message showing on the device..
I tried to add a snapshot here but couldn't.
Anyone please, I'm helpless..
Click to expand...
Click to collapse
Your issue is trying to flash older firmware than what is on your phone. You will need to download firmware with bootloader ver. 3 or higher ( bl ver no. is 5th number from right of firmware name )
Flashing twrp failed because of locked bootloader.

spawnlives said:
Your issue is trying to flash older firmware than what is on your phone. You will need to download firmware with bootloader ver. 3 or higher ( bl ver no. is 5th number from right of firmware name )
Flashing twrp failed because of locked bootloader.
Click to expand...
Click to collapse
That helped. Flashing the right version worked just fine.
Thanks!!

FRP lock
Hi people,
I got the "FRP lock" on my Samsung S8 SM-G950F(Exynos) and tried to flash Stock Oreo but when I press start Odin say PASS but recovery won't start.
please help

i flashed my S8 SM-G9500 variant however the phone has been locked and it is saying that i need to see the samsung service provider for the device has been locked. how can i solve this problem

Mark Nyombi said:
i flashed my S8 SM-G9500 variant however the phone has been locked and it is saying that i need to see the samsung service provider for the device has been locked. how can i solve this problem
Click to expand...
Click to collapse
can you get a pic of the screen youre talking about?

Hello guys i rooted my S8+ G-955F and i turned off usb debugging and ome lock
And i have android 9 installed on my device, i tried all the way but for nothink , any help please

S7 SM-G930P ~ Boot Loader Issues? SW REV CHECK FAIL : [ABOOT]FUSED 5 > BINARY 4

Hi All.
Thank you for any help you might give me in advance with this issue...
Last week, I tried to root the phone with the SM-G930P CF-Autoroot heroqltespr files with Odin found in this forum. I have rooted a few other phones but am no expert. The root after a few attempts failed (verified a few ways), however, some files must have been affected because the phone "identifies" as heroqltespr. Identifies as when I could plug into my PC heroqltespr would be the name. It was not set this way in the obvious name your device areas. I ended up doing a hard reset to clear the phone and other than the ghost naming everything was working fine.
A day or 2 ago Sprint rolled out a new OTA update which the phone installed. Since then the phone was draining battery life. After uninstalling and reinstalling the SD card today, it seems to have tripped a "Security Notice: Unauthorized Actions". That is when the trouble started. The phone started running hot, basically leaking battery power, and was all lagging. I'm assuming the CPU going Ludicrous speed.
Now, I am in a Samsung Splash screen loop, or or a recovery loop. The only thing it does is go into download mode.
I have tried flashing stock firmware, it fails. I've tried flashing with and without the SD or Sim card. Not really sure what I should be doing. The "P" version of my phone seems to be the bastard child of S7s. Any help you guys cold give me would be great. THANK YOU!
The Download Screen Reads:
Odin Mode (High Speed)
Current Binary: Samsung Official
System Status: Custom
FAP Lock: Off
Warranty Void: 8x8
Qualcomm Secure Boot: Enabled
AP SWREV: 85(2,1,1,1,1) K1 S4
I get this error when I try to flash back to stock SW REV CHECK FAIL : [ABOOT]FUSED 5 > BINARY 4

Stupid question but is your phone in a case?

Sw rev check fail : [aboot]fused 5 > binary 4
freakboysays said:
Stupid question but is your phone in a case?
Click to expand...
Click to collapse
No it isn't.
I get this error message on the download screen. SW REV CHECK FAIL : [ABOOT]FUSED 5 > BINARY 4

I fixed it.
5 > BINARY 4 error, has to do with a Version 5 bootloader Sprint came out with in 2018. The fact that this is only affected by the SM-G390P further complicates things for the average user. Users on version 5 bootloader will need to wait until/If a version 5 universal bootloader for the SM-G930U to get unbloated firmware. Information on restoring your S7 SM-G930P to where you left off before you started trying to root your phone can be found below. More info on Sprint F'n us and BL Version 5 can be found here
https://www.arencambre.com/blog/2018/01/01/fused-firmware-version-locks-samsung-s7/comment-page-1/. There was a post on XDA (which I can't find) which gave the idea that Sprint came out with this version 5 bootloader to prevent people from flashing the phones to the U version and going overseas with them.
The stock files for the first version of Sprint Version 5 bootloader firmware dated 1-1-18 can be found here:
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930P/SPR/download/G930PVPS5BRA1/206876/
Unzip. Only have auto reboot and Re-partition checked as options in Odin.

If you dont mind me asking, did you ever find a way to root the G930P with the 5th bootloader updates? Is it even possible at this point in time? Im new when it comes to rooting but with the amount of time Ive spent browsing the web it seems as if there is nothing. Thanks.

tonysak said:
I fixed it.
5 > BINARY 4 error, has to do with a Version 5 bootloader Sprint came out with in 2018. The fact that this is only affected by the SM-G390P further complicates things for the average user. Users on version 5 bootloader will need to wait until/If a version 5 universal bootloader for the SM-G930U to get unbloated firmware. Information on restoring your S7 SM-G930P to where you left off before you started trying to root your phone can be found below. More info on Sprint F'n us and BL Version 5 can be found here
https://www.arencambre.com/blog/2018/01/01/fused-firmware-version-locks-samsung-s7/comment-page-1/. There was a post on XDA (which I can't find) which gave the idea that Sprint came out with this version 5 bootloader to prevent people from flashing the phones to the U version and going overseas with them.
The stock files for the first version of Sprint Version 5 bootloader firmware dated 1-1-18 can be found here:
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930P/SPR/download/G930PVPS5BRA1/206876/
Unzip. Only have auto reboot and Re-partition checked as options in Odin.
Click to expand...
Click to collapse
I got screwed by this, I accidentally installed the P firmware, and now I cannot load U firmware because of this 5 > 4 error. I went to the blog you posted (arencambre), and I am only able to install the U firmware modem (CP package in Odin), everything else has to be P. And because of the P firmware, I am unable to edit APN settings to enable my native Hotspot. Is there anything I can do, besides wait for U firmware to come out with a Version 5 bootloader?

Chanman said:
I got screwed by this, I accidentally installed the P firmware, and now I cannot load U firmware because of this 5 > 4 error. I went to the blog you posted (arencambre), and I am only able to install the U firmware modem (CP package in Odin), everything else has to be P. And because of the P firmware, I am unable to edit APN settings to enable my native Hotspot. Is there anything I can do, besides wait for U firmware to come out with a Version 5 bootloader?
Click to expand...
Click to collapse
EDIT: Nevermind...sounds like you aren't on sprint.

lvpre said:
EDIT: Nevermind...sounds like you aren't on sprint.
Click to expand...
Click to collapse
Actually, I am on Sprint, and your directions were awesome, thank you so much! The only thing I had to do was change the line to:
settings put global tether_dun_apn "APNDUN,n.ispsn,,,,,,http://mms.sprintpcs.com,68.28.31.7,80,310,120,,default,dun,mms,supl"
I'm going to put a link to the thread so others can refer to it. https://forum.xda-developers.com/sprint-s7-edge/how-to/hotspot-bypass-nougat-ok-t3563446

Hi all,
EDIT: I posted this in another thread that was about two years old, where I followed the instructions that caused this: https://forum.xda-developers.com/sp...msung-galaxy-s7-sm-g930p-root-xposed-t3503599
That thread seems dead-ish and if you managed to fix this issue maybe you can help me also. Also what was lvpre's original post before he edited it, and would it apply here?
So the worst has happened - got a new (used) phone from Boost Mobile, tried this guide, and now I can only boot to the "An error has occured while updating the device software. Use the Emergency Recovery function in the Smart Switch PC software." screen. Sometimes it does take me to the original "Download mode" screen.
Now, I should be able to resolve this by flashing the original firmware correct? (As in, the firmware that was installed when it came)? Or does it just need to be firmware from the same date range that has the same bootloader? ODIN will still let me attempt flashing on this screen, but I still get the same error when I try again, which on the Download mode screen showed "SW REV CHECK FAIL : [system]Fused 4 > Binary 1"
Any advice here? My S6 bricked when somehow OEM unlock enabled itself and I can't get around the FRP lock, I will be VERY annoyed if the same thing happens with a NEW phone. If I can't fix this I am never buying Samsung again. Any advice on this is very welcome! I emailed Boost to ask them which firmware is installed (because I'm an idiot and didn't write it down but have never had flashing go this wrong before).
EDIT: Booting to recovery just shows a blue "RECOVERY BOOTING...." for a second in the corner and gives a recovery bootloop, just keeps flashing that.
EDIT: I apparently tried to flash an earlier bootloader/etc through ODIN according to the directions in the post I linked above, and after that I now have this problem. Nobody else in the thread seems to have had this problem, and your post is the closest to anything I can find on this issue. I would be in your eternal debt if you could help me out here.
PLEASE HELP!
EDIT: Theoretically if I can find the original firmware it was on I should be fine, right? Everywhere I read if flashing goes wrong you just flash the original stock on it. I guess worst case scenario I download gigs upon gigs of firmwares for Sprint 930P over the last year and find the one that sticks? Or is the fact my recovery is bootlooping and I can only go into download mode mean I'm bricked?

Hello all,
To follow up on my last post, I found success restoring to stock via this firmware:
G930PVPU4BQH1_G930PSPT4BQH1_SPR_7.0.zip
https://www.androidfilehost.com/?fid=817550096634799807
I left my original post just in case anyone messes this up the way I did. I still need root, but now I know how to reset to stock in the event this happens again.
For the record I bought a used Samsung Galaxy S7 off the Boost website.
IF YOU FOLLOW THIS GUIDE, OR ANY, MAKE SURE TO GO INTO "SETTINGS -> ABOUT PHONE" AND MARK DOWN WHAT FIRMWARE THE PHONE IS CURRENTLY ON AS STOCK. THIS WILL SAVE YOU A HEADACHE TRYING TO FIGURE OUT WHICH FIRMWARE YOU NEED TO DOWNLOAD IF THINGS GO WRONG. DO NOT PAY FOR A FIRMWARE DOWNLOAD OR USE FILESHARE SITES, GO HERE: https://simunlockremote.com/galaxy-s-series-firmware/ AND FIND THE VERSION YOU ARE ON AND IT WILL DIRECT YOU TO A FAST GOOGLE DRIVE LINK.
Thanks to all the hard work all the devs have done that have gotten use. I still need root soooooooooo if anyone knows how to do that let me know!
CHEERS! I am so happy right now

slvmecha said:
Hello all,
To follow up on my last post, I found success restoring to stock via this firmware:
G930PVPU4BQH1_G930PSPT4BQH1_SPR_7.0.zip
https://www.androidfilehost.com/?fid=817550096634799807
I left my original post just in case anyone messes this up the way I did. I still need root, but now I know how to reset to stock in the event this happens again.
For the record I bought a used Samsung Galaxy S7 off the Boost website.
IF YOU FOLLOW THIS GUIDE, OR ANY, MAKE SURE TO GO INTO "SETTINGS -> ABOUT PHONE" AND MARK DOWN WHAT FIRMWARE THE PHONE IS CURRENTLY ON AS STOCK. THIS WILL SAVE YOU A HEADACHE TRYING TO FIGURE OUT WHICH FIRMWARE YOU NEED TO DOWNLOAD IF THINGS GO WRONG. DO NOT PAY FOR A FIRMWARE DOWNLOAD OR USE FILESHARE SITES, GO HERE: https://simunlockremote.com/galaxy-s-series-firmware/ AND FIND THE VERSION YOU ARE ON AND IT WILL DIRECT YOU TO A FAST GOOGLE DRIVE LINK.
Thanks to all the hard work all the devs have done that have gotten use. I still need root soooooooooo if anyone knows how to do that let me know!
CHEERS! I am so happy right now
Click to expand...
Click to collapse
Don't take any updates. My edited post was on how to get hotspot working. There is a thread here about it, but I changed a line of code.

Switched from Sprint to T-Mobile. Am I out of luck?
lvpre said:
Don't take any updates. My edited post was on how to get hotspot working. There is a thread here about it, but I changed a line of code.
Click to expand...
Click to collapse
I've got a Galaxy S7 G930P from Sprint. I just switched to T-Mobile a couple months ago and brought my S7 phone with me. I was hoping to flash my rom to either the G930U or the G930T (T-Mobile) version, but both are still bootloader v4 and I hit the same error that everyone else on this thread was hitting.
My main problem is that my S7 phone can't send/receive MMS messages on T-Mobile, even after updating the APN settings, and, even worse for me personally - my phone gets below average reception everywhere I go, presumably because my Sprint G930P rom has locked down some of the bands that T-Mobile uses.
Aside from getting a new phone, do I have any options? Or am I stuck waiting for either a G930T or a G930U update based on bootloader 5?

jbuck2 said:
I've got a Galaxy S7 G930P from Sprint. I just switched to T-Mobile a couple months ago and brought my S7 phone with me. I was hoping to flash my rom to either the G930U or the G930T (T-Mobile) version, but both are still bootloader v4 and I hit the same error that everyone else on this thread was hitting.
My main problem is that my S7 phone can't send/receive MMS messages on T-Mobile, even after updating the APN settings, and, even worse for me personally - my phone gets below average reception everywhere I go, presumably because my Sprint G930P rom has locked down some of the bands that T-Mobile uses.
Aside from getting a new phone, do I have any options? Or am I stuck waiting for either a G930T or a G930U update based on bootloader 5?
Click to expand...
Click to collapse
If your phone is uicc [sim] unlocked from sprint... you can try the following.
1. Odin a dec/Jan firmware...like QJ3. But replace the cp slot with the file from the latest u firmware. This is the modem file.
2. When your phone starts, you will receive a pop up message, just hit cancel.
3. Install a package disabler like sabs, bk, adhell2. Disable securitylogagent . This should remove the annoying message. Sabs takes a little effort to setup, but you may need it for the disabler part. Restart after disabling.
4. Pop in sim. See if the additional bands are unlocked.
If you fail, you can always just odin back to a v5 sprint firmware. But don't try it unless you are stuck on the current firmware and your phone is doing nothing. It won't brick your phone.
While the firmware is not downloadable, modem files can downgrade one major update.
This worked for me, but I only have sprint and haven't tried it elsewhere.
Here is an article https://www.arencambre.com/blog/2018/01/01/fused-firmware-version-locks-samsung-s7/comment-page-1/

Is this triggers the knox counter ?

downgrading problem oreo to nougat s8

hello,
i managed to get the phone back to get in download mode. stock everything, no root whatsoever. my goal is to root my phone and i have experience doing so but i guess i was just unlucky this time.
i tried searching allover the internet for a fix, searching xda etc.
first off: my device is running oreo 8.0 and it's type is G950FX.
I want to downgrade to 7.0 because FRP lock is on, i did turn on oem lock before starting however i am unable to log in to my old google account connected to my phone.
when i try to flash any bootloader i get SW REV CHECK FAIL DEVICE 2, BINARY 1. i tried almost any trick in the book like downloading 7.0 from sammobile, flashing using odin.
the things i run into when flashing are:
1.can't flash the bootloader, probably because of frp lock.
2. when i don't flash the bootloader for 7.0 i get dm-verity error 0x2.
3. when i only flash 8.0 oreo pda & csc and then flash 7.0 pda on top i do get to boot but i get encryption interrupted error.
4. i am able to boot in 8.0 but can't get past the frp.
i'm out of answers, i really hope anyone can help me out of this situation as i want to use my phone.
Help is much appreciated!
edit: i tried flashing multiple versions of android 7.0 but i keep getting sw rev check fail bootloader device 2 binary 1
i basicly want to do this, a downgrade: https://forums.androidcentral.com/s...s8-plus/878062-how-downgrade-oreo-nougat.html
the problem is i didn't sign out of google or samsung accounts before resetting to factory

You can't. You have a new bootloader v2.
A simple search gives you this answer, if you have u2 and CRED bootloader installed you are stuck. No way to go back anymore.

i'm on u2 and CRED bootloader. i did search for this indeed but i didn't want to give up.
do you think there will be ever be a way to get back into my phone again?

If you have FRP lock good luck. I haven't seen a way yet.

I know it's been 5 months and you've probably either gotten rid of the phone or it's sitting in a dusty bin somewhere, but have you tried Galaxy Reaper? It's a pretty legit FRP bypass tool.
Edit: Scratch that. It's apparently been patched since I last knew it to work. Just wanted to double check, and sure enough..

Can't boot phone: Blue security error screen

Let me start off by saying , I don't really know what I'm doing anymore, I used to be pro at rooting and all this android shinanigans, but it has been a while , so please bear my ignorance.
So I received this phone from a buddy who was going dark for a year in Asia, and neither of us realized these phones now do the FRP thing...
No problem.. So I tried to follow * SOME GUIDE * on how to bypass it , and ended up with a the factory binary OS booting up... So from there I tried to flash stock rom, and now I'm stuck on the blue security error screen
I am using a SM-G950W ( Canadian Phone ) and am having ZERO luck finding any help.

tutchthesky7 said:
Let me start off by saying , I don't really know what I'm doing anymore, I used to be pro at rooting and all this android shinanigans, but it has been a while , so please bear my ignorance.
So I received this phone from a buddy who was going dark for a year in Asia, and neither of us realized these phones now do the FRP thing...
No problem.. So I tried to follow * SOME GUIDE * on how to bypass it , and ended up with a the factory binary OS booting up... So from there I tried to flash stock rom, and now I'm stuck on the blue security error screen
I am using a SM-G950W ( Canadian Phone ) and am having ZERO luck finding any help.
Click to expand...
Click to collapse
Not sure what screen you are at
does it say 'secure check fail" that means your bootloader is wrong, you are trying to flash an incompatible rom eg that has an older bootloader or different carrier, would be my guess but not sure from your description

IronRoo said:
Not sure what screen you are at
does it say 'secure check fail" that means your bootloader is wrong, you are trying to flash an incompatible rom eg that has an older bootloader or different carrier, would be my guess but not sure from your description
Click to expand...
Click to collapse
Yes it was, I finally got it working by flashing a verizon rom onto it , even though the verizon is a G950U .....every G950W firmware failed

Samsung S8-SM-G950F custom binary blocked by FRP lock

Samsung S8-SM-G950F custom binary blocked by FRP locked, i saw so many theards about this and i read them, and i still don't know what to do, so my question is if i download firmware with "SamFirm" and then use oddin will i get my phone unlocked from that ? As i had custom rom for year and half and today i got that error for the 1st time , also if the "SamFirm" is not good for that can someone give me link for firmware for my phone as updato and all other sites download soo slow at 15 kb/s and i can't use them it will take 20hours to download that (

Similar situation, I broke my S8 screen, so never got it fixed, and was recently without a laptop, so thought id use the S8 thru Dex, it all worked no probs, however, I used to unlock bootloaders to install custom firmware and os's but didnt think id done it on my S8 as it was still under warranty, so upon looking in the developer options, i saw that OEM Unlock was on, so i switched it off, not remembering rooting the phone, now i get same error it bootloops and says custom binary frp lock. Did u ever get yours sorted? I know my google account to login 2 it if i ever get the official rom back working, but trying odin and smartswitch restore im still stuck, just keeps failing, saying frp lock. Cant even get into recovefry mode to factory reset, didnt thiunk i had TWRP installed on it, but i must have. Anyway, if anyone can pls help me pls contact me here or at dcillusionz at proton dot me. Thanks.

PS - I tried downloading from SamFW and using Odin, but FAILED. Hoping u had some luck?