Related
******************Root Recovery Doogee X5 max pro*******************
Your waiting Time IS Now Finished Here is Complete Guide to Root Doogee X5 Max Pro install twrp And More,
Hit :good:
ADB & Fastboot
Before doing most things mentioned below you will need "adb" and "fastboot" installed. Two of your options are to install the Android SDK Tools or the Minimal ADB and Fastboot tool. If you are somewhat new to this I highly recommend the second one. Go here, download the latest version (1.3.1 as of this writing), and install it. When setup is complete you should have an icon for the Minimal ADB and Fastboot tool.
Note: I highly recommend you add "C:\Program Files (x86)\Minimal ADB and Fastboot" to your PATH variable in Windows. This way you can open a Command Prompt anywhere and use adb or fastboot.
1) Unlock Bootloader
Power on the phone and skip through all of the setup options
Go to Settings -> About device
Tap Build number five times to enable Developer options
Go to Settings -> Developer options
Enable OEM unlocking
Enable USB debugging
Plug the phone in to your PC and authorize it
Open a Command Prompt
Type adb reboot-bootloader
The phone should reboot and in a very tiny font at the bottom you should see => FASTBOOT mode
Type fastboot devices to verify that your PC sees it correctly
Type fastboot oem unlock
Press Volume Up to say Yes and wait for this to finish
Type fastboot getvar all and look for (bootloader) unlocked: yes
Type fastboot reboot
You should see your phone reboot a couple times as it erases the phone
Install twrp-
Power on the phone
You can configure your phone now or just skip through all of the setup options and do that later
Go to Settings -> About device
Tap Build number five times to enable Developer options
Go to Settings -> Developer options
Enable OEM unlocking
Enable USB debugging
Plug the phone in to your PC and authorize it
Open a Command Prompt to wherever you extracted the .img file
Type adb reboot-bootloader
The phone should reboot and in a very tiny font at the bottom you should see => FASTBOOT mode
Type fastboot devices to verify that your PC sees it correctly, rename twrp to recovery.img
type fastboot flash recovery recovery.img to flash recovery
Type fastboot reboot
Rooting-
Download BETA-SuperSU.zip and save it to the phone's internal memory or an inserted microSD card
Plug the phone in to your PC
Open a Command Prompt
Type adb reboot recovery
You should now be in twrp. Go to Install zip, find SuperSU.zip, and install it
When it finishes go to Go Back -> Reboot Phone -> No
Once the phone boots up launch SuperSU and configure it as you like
Other Solutions-
i have doogee x5 max-s (i geuss limited editon in algeria ) with mtk6735 . i do evrything and all steps but when i reboot to recovery mode i have ( no command ) in the screen .... how to fix that ? sorry for my ****ty english XD
I had the same Issue but i have found a solution!
After you have flashed the twrp recovery, dont reboot the phone! the "recovery.sh" will replace the twrp on every boot!
Just pull off the battery after flashing, disconnect usb and put the battery back in to the phone.
Now get in to the recovery by pressing volume up and power button together until the select bootmode menue appears.
select recovery with the volume up button and enter with the volume down button.
and now you should be in the twrp main menue.
i hope it works for you too!
greetz from the lizard
It does not work from step 12, all the drives are correctly installed and windows recognizes the cell, the recovery image is in the internal memory and also in the sd but of the error "can not load Recovery.img". I tried all the tutorials on the net to do root and nothing worked.The flash does not recognize to pass the recovery also the installed drivers because windows recognizes the cell phone.
pitro1 said:
It does not work from step 12, all the drives are correctly installed and windows recognizes the cell, the recovery image is in the internal memory and also in the sd but of the error "can not load Recovery.img". I tried all the tutorials on the net to do root and nothing worked.The flash does not recognize to pass the recovery also the installed drivers because windows recognizes the cell phone.
Click to expand...
Click to collapse
use sp flash tools to flash recovery, scatter also added with twrp
Flash does not pass the file in the download only option, the process does not start. I reinstalled ROM by firmware mode all ok, but the process of passing recovery on command 12 and 13 of the error message. I manually copied the recovery to the sd and internal memory but also from the error. Does not find the file speaks that it is not a command found.
pitro1 said:
It does not work from step 12, "can not load Recovery.img".
Click to expand...
Click to collapse
Don't use Capital R's
fastboot flash Recovery Recovery.img
Code:
fastboot flash recovery recovery.img
Doogee X5 Max Pro - Update 01/16/2017 + TWRP-3-0-2 & SuperSU-v2.79
Working root for Update 01/16/2017
Title: Doogee X5 Max Pro
Listed: 01/19/2017 11:21 pm
ROM Version: ROM Android 6.0
Doogee X5 Max Pro - Update 01/16/2017
TWRP-3-0-2 + SuperSU-v2.79
Use This Version Flashtool
SP_Flash_Tool_v5.1620.00.000
XN Logos said:
use sp flash tools to flash recovery, scatter also added with twrp
Click to expand...
Click to collapse
Until today I could not do root on x5 max pro. In the method below even downloading the twrp when starting with the power + volume down button start with a menu in Chinese and if you start with volume up + power goes in the default recovery mode.
Same as Pitro1 I am on 16.01 update and I cannot install twrp no matter what I try.
I tried x32 and x64. I tried rebooting directly on recovery or first load system and then adb reboot recovery. I tried to format all first (now I lost my Imei and so on lol). I downgraded and updated again. Downgrading works only with 26.12 version. All others are giving me Colorado lines on the screen and nothing else...
OEM unlock, file transfer, adb, fastboot, drivers detection, are all working good. Only I cannot install twrp...
Also I cannot write nvram nor with SN Writer 2.1504 nor with Imei & SN Writer 1.7.2, MetaAP mode fails all the time...
I'm just about to send it back...
How i rooted my Doogee X5 Max Pro
How i rooted my Doogee X5 Max Pro
- Unlock Bootloader tutorial in the first post By XN Logos.
- Updated ROM to Android 6 with SP FLASH TOOLS V.5.16.20
- boot phone for 1st start and activate Developer and USB debugging
- Installed TWRP-32x + SuperSu with SP FLASH TOOLS V.5.16.20
i returned the phone as i had no imei anymore.
i got a new one, i did not put any sim or whatsoever, i just unlocked bootloader, and updated to 16.01 version
then i tried to install twrp via fastboot and it did not work, i did it with sp flash tools as advised and removing the battery prior (don't forget to!). it worked !
Stripe_nl said:
How i rooted my Doogee X5 Max Pro
- Unlock Bootloader tutorial in the first post By XN Logos.
- Updated ROM to Android 6 with SP FLASH TOOLS V.5.16.20
- boot phone for 1st start and activate Developer and USB debugging
- Installed TWRP-32x + SuperSu with SP FLASH TOOLS V.5.16.20
Click to expand...
Click to collapse
How old is your phone and what build version was it at before you started? Because this doesn't work on mine. Which of the "Android 6" ROMs did you flash to start with as I've tried flashing mine back to an earlier one in case it's something with the later stuff that my phone has come with but they either don't make a difference or they won't even boot.
I tried the method in the first post here and the phone wouldn't even boot (switch on and you get the Doogee logo in silver for a few seconds then it reboots and does the same again). I had to flash the stock ROM from NeedROM to get it working again.
I've tried flashing TWRPx32 and x64 available NeedROM both with SPFlash tools and with ADB. Generally flashing it with ADB from the command line leaves the phone in that boot-loop. If I flash it with SPFlash when you try to boot into Bootloader afterwards you get the Doogee logo in silver for a few seconds then it seems to reboot again on it's own and boot normally - you don't even get the menu to choose Fastboot, Recovery or Normal. From then on trying to boot to the Bootloader gives you the menu but choosing Recovery gives you the standard recovery.
It's almost as if something is overwriting the recovery partition with the original after I flash TWRP onto it.
Anyone got any suggestions about where I might be going wrong or a way around whatever additional security they might have put in there?
Hi. I have tried to root my x5 max pro with flash tools to load TWRP, but it always restarts normally and the TWRP does not come out. I found you and I started to try this method to load the TWRP. Does everything good, unload bootloader and load recovery, but loading the TWRP gives me error .:
Device unauthorized.
This adb's $ ADB_VENDOR_KEYS is nor set; Try adb kil-server if that seems wrong
what I do?
rooting X5 Max pro in Ubuntu 16.04
Hi all, this is my first china phone and I basically bought it only to experiment, I'm a linux power user but this is the first time I 'play' with an android OS.
thanks to multiple guides and posts on this and other forums I'm getting somewhere and learning a lot about how to manage an android OS, I'm sharing a bit of info I unovered about doing this under ubuntu but I'm also stuck and in need of guidance, please help me.
Linux specific issues:
I'm running ubuntu 16.04 LTS, installed fastboot and adb tools from ubuntu repos, with these tools and no other modification to my system I could follow the tutorial on how to unlock the OEM bootloader with adb and fastboot.
accordingly to this post about SP flash tool in linux you might need to blacklist a modem manager module in order for SP flash tool to connect to the phone, you also need to install usb development tools (package libusb-dev) and check through dmesg that your linux OS can actually properly read mediatek usb devices.
After following the above mentioned instructions (both the linux sp flash tool tutorial and the bootloader unlocking howto) I could get SP flash tool linux (multiple version) to see the phone after you connect it while SP flash is downloading the new recovery image and flash it with an ok message.
If you get stuck with a BROM error 1013 remember to start sp flash tool with root privileges.
Phone specific issues:
I can get SP flash tool to flash my phone recovery with an ok message confirmation but the phone keeps rebooting with doogee recovery and not twrp. I'm on the newest stock ROM update (20170116) as of current post date. I've been using 32 bit TWRP images from multiple sources and linux version 5.1620 of spflash tool from their website
so my questions are as following:
1) after reading other posts I think I might have to play with different versions of SP flash tool and TWRP until I get the right combination, I think I might be using 64bit spflash tool for linux to flash a 32bit rom or something like that, can anybody confirm precise version number of the stock rom, TWRP and SP flash tool that worked out for you?
2) should I try to install the whole stock ROM posted in this chinadevices thread before trying to flash only TWRP recovery? please also check the linked thread for multiple custom ROM being ported to this phone, please also note that the full stock rom this poster uploaded (it's in the "all firmware" link) contains another flashing tools with chinese instruction called MultiDownloadTool.
www.china-devices.com/forum/index.php?threads/doogee-x5-max-pro-mt6737-custom-roms.20527/
3) I don't have access to a windows installation right now, but I do have a Win10 VM under Vmware workstation 12 pro, so I could try windows version of sp flash tool, do you guys think that USB passthrough would work?
ibrooks said:
How old is your phone and what build version was it at before you started? Because this doesn't work on mine. Which of the "Android 6" ROMs did you flash to start with as I've tried flashing mine back to an earlier one in case it's something with the later stuff that my phone has come with but they either don't make a difference or they won't even boot.
I tried the method in the first post here and the phone wouldn't even boot (switch on and you get the Doogee logo in silver for a few seconds then it reboots and does the same again). I had to flash the stock ROM from NeedROM to get it working again.
I've tried flashing TWRPx32 and x64 available NeedROM both with SPFlash tools and with ADB. Generally flashing it with ADB from the command line leaves the phone in that boot-loop. If I flash it with SPFlash when you try to boot into Bootloader afterwards you get the Doogee logo in silver for a few seconds then it seems to reboot again on it's own and boot normally - you don't even get the menu to choose Fastboot, Recovery or Normal. From then on trying to boot to the Bootloader gives you the menu but choosing Recovery gives you the standard recovery.
It's almost as if something is overwriting the recovery partition with the original after I flash TWRP onto it.
Anyone got any suggestions about where I might be going wrong or a way around whatever additional security they might have put in there?
Click to expand...
Click to collapse
Same here. May a work around would be finding out the oem commands in fastboot. I have seen a tutorial to get them, but you have to be root: https://www.xda-developers.com/how-to-discover-hidden-fastboot-commands/
I search a simple method
Why all so complicate? I am searching for a simple way to root.
For my old Doogee X5, I discovered just
update-ROOT-DOOGEE_X5.zip
Copy the zip to the micro-SD-card
Settings -> Phone info -> Update -> menu "update local" -> choose zip from micro-SD-card.
Start update.
That's all!
Now I search for such a simple solution for my new Doogee X5 MAX pro.
I do not want any methods with "volume down power", because my X5 MAX pro has the menus after "Volume down power" start in Chinese language.
Recovery TWRP x32
http://www.needrom.com/download/twrp-x32-rom/
http://www.needrom.com/category/doogee/serial-x-doogee/x5-max-pro/
This version finally works ! Thank you
Neaw said:
Recovery TWRP x32
http://www.needrom.com/download/twrp-x32-rom/
http://www.needrom.com/category/doogee/serial-x-doogee/x5-max-pro/
Click to expand...
Click to collapse
Hi there,
I just tried the first file you posted, (twrp-x32-rom), and this one works for me after all previous attempts to boot up TWRP failed. Thanks for the link !
What I had tried before:
I have a relatively new X5 Max Pro, which I ordered a week ago. I updated the firmware to the newest version (20170116) using the OTA update function.
Then I tried to flash TWRP using the files from "needrom.com" which seem to have worked on older versions of the phone/firmware, but did not work for the newer versions.
I tried 32bit and 64bit TWRP versions and flashed them with SP flash tool, but when pressing Vol+/Power the phone would not boot into TWRP recovery. Insted, when selecting "Recovery" from the boot menu, the phone would show the Doogee logo in silver, then blink once, then boot up normally. When repeating this process, then phone boots into Stock recovery, indicating that the TWRP I flashed was replaced by stock recovery.
However, I just flashed the recovery.img from "TWRP LATEST" (the first file posted by Neaw) with SP flash tools and was finally able to boot into TWRP. I installed the superSU-zip 2.79 included in the link, and I am now rooted. Once again, thanks for posting this :good:
Greetz, Ollek74
Doogee X5 MAX! SERIUS PROBLEM......
Hello Guys i have a serious problem with my phone.....i have Malware on it and i cant uninstall it or anything alse.....the worst thing is that my phone not responding in any connection except that charging.....i can't have access on my storage cause this is not allowed or gives the choice! i tried everything but nothing nor the usb debugging or anything else please give me your help!!!!
Hello, I messed up on my device P9 Lite, it is unlocked, bootload unlocked, FRP Unlocked and TWRP is installed ( or i guess it was):
I wanted to install a stock firmware and formatting SD card, I went to TWRP and i wipe everything but i did something wrong because my device can go only in "Huawei eRecovery" and "Fastboot mode".
Furthermore my PC doesn't recognize the mobile so i'm unable to use ADB or other toolkit and for a beautiful ending i can't access to twrp anymore.
I don't know what to do, i jsut tried to change usb porta and usb cable.
Thank you very much
m0rix93 said:
Hello, I messed up on my device P9 Lite, it is unlocked, bootload unlocked, FRP Unlocked and TWRP is installed ( or i guess it was):
I wanted to install a stock firmware and formatting SD card, I went to TWRP and i wipe everything but i did something wrong because my device can go only in "Huawei eRecovery" and "Fastboot mode".
Furthermore my PC doesn't recognize the mobile so i'm unable to use ADB or other toolkit and for a beautiful ending i can't access to twrp anymore.
I don't know what to do, i jsut tried to change usb porta and usb cable.
Thank you very much
Click to expand...
Click to collapse
try unlocking your bootloader with fastboot, and then flash twrp through fastboot, then try booting into recovery while your phone is not connected to your pc, it should work.
I'm using SRK Tool i'm trying to unlock bootloader (i got yet the number) and i plug my device in fastboot but the tool is "waitinf for device" and doesn't see it
Did you install the drivers? Just install Hisuite, that should do it. Then flash TWRP via fastboot flash recovery xxxxxx.img
In TWRP there's an option to activate ADB. It's in Advanced. Shouldn't need it at this point though. The device should be visible in Explorer once it's in recovery.
Download and install ADB and fastboot minimal driver. Then go to the folder where they are installed and open a cmd there, boot your phone to fastboot and type "fastboot devices"
You should be able to see your device detected, then flash the recovery image with the command "fastboot flash recovery twrp.img" and replace twrp with whatever the recovery image is called.
The easiest way should be transferring stock ROM (update.app) to dload folder on external sd card. You can use card reader, for example. Then just use 3 buttons combo and flashing should soon begin.
m0rix93 said:
I'm using SRK Tool i'm trying to unlock bootloader (i got yet the number) and i plug my device in fastboot but the tool is "waitinf for device" and doesn't see it
Click to expand...
Click to collapse
srktool uses adb, but that only works if android is booted. try fastboot oem unlock (unlock code), and then fastboot flash recovery (path to recovery image)
Guys, thank you very much for your replays and patience.
I solved the problem, my 64 GB SD Card was damaged :crying: so yesterday I buyed a new memory and I used the "dload method" and everything went right!
Furthermore I update from EMUI 4.1 to 4.1.1 :fingers-crossed:
Thanky you!
Hi,
Today I wanted change my recovery. I had the Lineage OS recovery, but i was trying to install the twrp recovery.
So, the guide of twrp says that you should boot the twrp via fastboot boot twrp.img and install via the booted twrp. But I mistaken the command and I wrote fastboot flash boot twrp.img, I tried to reboot and the device booted himself in fastboot with the enter reason "error boot prepare" and I can't boot into the system or recovery.
I tried to flash the official image downloaded from the Google Developers website, but when i run ./flash-all.sh, console get stuck. I waited for about 15 minutes but nothing. I tried even the official Android Flash Tool but after 10 seconds it says "Your device stopped responding. You may have to select restart in the bootloader menu in order for it to be recognised again."
Does anyone know how to help me? Thanks in advance.
GioPan_ said:
Hi,
Today I wanted change my recovery. I had the Lineage OS recovery, but i was trying to install the twrp recovery.
So, the guide of twrp says that you should boot the twrp via fastboot boot twrp.img and install via the booted twrp. But I mistaken the command and I wrote fastboot flash boot twrp.img, I tried to reboot and the device booted himself in fastboot with the enter reason "error boot prepare" and I can't boot into the system or recovery.
I tried to flash the official image downloaded from the Google Developers website, but when i run ./flash-all.sh, console get stuck. I waited for about 15 minutes but nothing. I tried even the official Android Flash Tool but after 10 seconds it says "Your device stopped responding. You may have to select restart in the bootloader menu in order for it to be recognised again."
Does anyone know how to help me? Thanks in advance.
Click to expand...
Click to collapse
Do you have tryied to run the official google tool in Windows to try to rescue it?
Estebiu said:
Do you have tryied to run the official google tool in Windows to try to rescue it?
Click to expand...
Click to collapse
Yes, I wrote in the post, I tried both the command line tool and the chrome version. Btw i'm on linux
Okay so, I fixed.
For anyone who will have this problem you just need to flash official Android 9 and next Android 10. Only with Android 10 you can use fastboot flash boot recovery.img (you can't use twrp in android 10 with the Pixel 3a)
GioPan_ said:
Okay so, I fixed.
For anyone who will have this problem you just need to flash official Android 9 and next Android 10. Only with Android 10 you can use fastboot flash boot recovery.img (you can't use twrp in android 10 with the Pixel 3a)
Click to expand...
Click to collapse
I'll try this...
GioPan_ said:
Okay so, I fixed.
For anyone who will have this problem you just need to flash official Android 9 and next Android 10. Only with Android 10 you can use fastboot flash boot recovery.img (you can't use twrp in android 10 with the Pixel 3a)
Click to expand...
Click to collapse
Does this work if adb not working? I only have fastboot.
WriteLovey said:
Does this work if adb not working? I only have fastboot.
Click to expand...
Click to collapse
It depends if your pc were authorized, if it was, you can use fastboot to flash the stock version of Android 9, just running the flash-all(.bat) script.
GioPan_ said:
It depends if your pc were authorized, if it was, you can use fastboot to flash the stock version of Android 9, just running the flash-all(.bat) script.
Click to expand...
Click to collapse
I'm not certain I understand what you mean by PC authorized? I'm using a Windows 10 tablet. When the phone is attached to the computer it sees it as a device that can be disconnected through USB.
WriteLovey said:
I'm not certain I understand what you mean by PC authorized? I'm using a Windows 10 tablet. When the phone is attached to the computer it sees it as a device that can be disconnected through USB.
Click to expand...
Click to collapse
All is well. I'm back on my Pixel, yeah!
GioPan_ said:
It depends if your pc were authorized, if it was, you can use fastboot to flash the stock version of Android 9, just running the flash-all(.bat) script.
Click to expand...
Click to collapse
I just had an encounter with this. I was rooting my device (Pixel 3A) and messed up my partitions through accidentally attempting a downgrade which broke all my ****. I was unable to easily reset this device to factory, so it took me several days to figure out and root. I'm getting better though as a hacker, because a year ago this would have taken me a month.
I was able to enter recovery mode (lying down Android, NO COMMAND). From this recovery mode, adb devices -l recognized my device, although I was unable to get a shell.
At first, ADB was telling me the device was authorized, but I messed with a bunch of other stuff (tried to flash a bunch of different partitions and monkey around in general trying to install Magisk) and then ADB started telling me it wasn't authorized when I used devices -l.
Once it said unauthorized, I was unable to issue the device any commands with ADB, so I just used hardware keys to get into recovery mode. From there, I selected OTA update, and it got into sideload mode. At that point, I used adb sideload with the OTA package that I downloaded here https://developers.google.com/android/ota
^^^ That operation did successfully restore my device to factory
This following guide here describes the details of how to use hard keys to enter recovery on this phone (don't download anything from there tho, and make sure your adblock is on)
How to Hard Reset your new Google Pixel 3a [Tutorial]
In this article, you will learn how to start your Google Pixel 3a up into the Recovery Mode and perform the Hard Reset to make it work perfectly again.
thedroidguy.com
I just wanted to say, I've been wrestling this hardbrick for a couple of days with my Pixel 3a.
I've finally overcome it by sideloading the most recent OTA update after using a hard key combo to get into recovery mode. The hard key combo is hold Power Button, tap Volume Up, then release both. Then, all you need is to use the command:
adb sideload <OTA.zip>
^^^OTA wasn't the actual filename though, you can download OTA packages for Pixel 3A here: https://developers.google.com/android/ota
the OTA binaries are NOT the same as the factory images, which is here
Factory Images for Nexus and Pixel Devices | Google Play services | Google for Developers
developers.google.com
Sideloading the OTA package brought my phone back from only having fastboot and recovery mode, even when flash-all.sh from the official downloaded firmware failed. Now I know how to undo damage that I cause by rooting this thing. Since I sideloaded newest firmware, it was also like applying an update. I easily got root after that, and I've logged the process. I'll make it into a guide soon
I'll just note that if you accidentally flashed the TWRP boot image instead of simply booting into it, I believe all you have to do is flash the stock boot.img to fix the problem. Obviously you can sideload the entire rom image, but that shouldn't be necessary.
Using the Windows computer (or whatever computer you are sending ADB commands from), download the full stock image directly from Google. Unzip it and then upzip the folder inside. You should find the boot.img file inside that folder. Take that file and then flash it to the phone using the normal ADB command: fastboot flash boot boot.img
While I haven't tried this myself recently, it should work in theory. The command "fastboot flash boot twrp.img" flashes the boot partition with a non-working twrp image, so replacing the faulty image with the stock boot.img should fix the problem.
If I did the same I would first attempt to manually put device in bootloader/aka fastboot mode then fastboot flash the stock boot.img , sudo fastboot flash boot boot.img --slot all
I only read the op (first post here);but I betcha that would have worked. Then sudo ./flash-all.sh and let it do it's thing.
Greetings everybody,
please I need help.
Some days ago I rooted my lenovo tb-x606f and then I installed twrp recovery but Yesterday I uninstalled some preinstalled apps about games, browser and other little things and after this during rebooting the tablet it go in bootloader mode and now i'm not able to boot the system.
I tried to reflash the firmware with SP flash tool and the guide said to shutdown the lenovo tab during flasihng but nothing suceeded.
So I discovered the TWRP recovery was already working and I tried to format the tablet for cleaning it before a new flash but the twrp was unable to mount vendor and i tried to manually mount it in mount section without success.
So during a research i discovered that I need to proceed in fastboot mode flashing manually recovery.img; system.img; boot.img and userdata.img
I did this but the bootloop persists and TWRP recovery was deleted!
I tried the last command in command prompt adb fastboot in the folder of stock firmware: fastboot flashall but the reply is: fastboot: error: could not read android-info.txt
Thank you in advance and have a good day.
Use lenovo rescue smart assistant. download here
It will recognize the device model automatically and flash the latest firmware for it. 5 mins or so and it should be good as new. Unfortunately you'll have to flash twrp again and reroot.
Thank you,
i updated Lenovo Rescue Smart Assistant finding my tb-x606f that before was not present.
I downloaded the firmware in Lenovo Smart Assistant and via SP Flash Tool I flashed it, formatting data and browsing auth.key ; android scatter.txt; and update.bin (the first file)
$ fastboot set_active a
I have a Grand Prime Duos (SM-G530H), currently running an Android version 4.4.4 and I wanted to install a custom ROM to have a higher version of Android. (Tried installing LineageOS 17.1 from itexpert.120, but any custom ROM with a higher version of Android would do)
Problem 1: No custom recovery seems to work.
I installed the TWRP app and tried to flash 4 different versions of their recovery images (from twrp-3.7.0_9-0-fortuna3g.img to twrp-3.4.0-0-fortuna3g.img) and all of them resulted in a unless glitched gray recovery screen.
I also tried the CWM app but it fails to download a recovery image for the device, tried looking online for a image file but didn't find one either.
In the end I reverted the recovery to the default one that I had backed up.
Problem 2: ADB works but fastboot doesn't.
I downloaded the ADB tools to try and flash the ROM from my computer instead. The ADB commands work, but when the device enters recovery mode the fastboot commands don't work. ("fastboot devices" doesn't even list the device)
Went to check the drivers. Most tutorials say to open the device manager and look for the phone device with an exclamation mark and update the driver with ones downloaded from the official site. To my surprise the device doesn't show up at all in the device manager (not even with an exclamation mark). Trying to install the drivers anyway says it's already installed.
The Odin software showed the same problems, detects the device when it's on, but doesn't detect it when in recovery mode.
Problem 3: Error when installing directly through the recovery mode options.
This probably wouldn't work for technical reason I'm not aware of, but I went and tried anyway. On the default recovery mode there are 2 options, apply update from ADB and apply update from external storage. Tried both, the first using the command "adb sideload <lineage rom file>" and the second using the ROM file in a SD card. Both begin to unpack and install the file but after a while throw an error "E: failed to verify whole-file signature", then the device boots to the usual OS.
So, is there anything else I can try? any other recovery images or hacks that won't give me the glitched recovery that TWRP had? Or another method to install a ROM without fastboot? Maybe using another file format in problem 3?
OBS: the device is rooted and has no "OEM unlock" options in its settings
delete the samsung usb drivers and install an older version. only way you can flash custom recovery is with odin. only way to flash custom rom is with custom recovery. fastboot and sideload wont work, this isnt a nexus
You think the reason why the custom recovery was glitched is because it was flashed through the TWRP app and not Odin? Seems unlikely. Is there any non-TWRP recovery image for my model you can point me to?