Hi,
Today I wanted change my recovery. I had the Lineage OS recovery, but i was trying to install the twrp recovery.
So, the guide of twrp says that you should boot the twrp via fastboot boot twrp.img and install via the booted twrp. But I mistaken the command and I wrote fastboot flash boot twrp.img, I tried to reboot and the device booted himself in fastboot with the enter reason "error boot prepare" and I can't boot into the system or recovery.
I tried to flash the official image downloaded from the Google Developers website, but when i run ./flash-all.sh, console get stuck. I waited for about 15 minutes but nothing. I tried even the official Android Flash Tool but after 10 seconds it says "Your device stopped responding. You may have to select restart in the bootloader menu in order for it to be recognised again."
Does anyone know how to help me? Thanks in advance.
GioPan_ said:
Hi,
Today I wanted change my recovery. I had the Lineage OS recovery, but i was trying to install the twrp recovery.
So, the guide of twrp says that you should boot the twrp via fastboot boot twrp.img and install via the booted twrp. But I mistaken the command and I wrote fastboot flash boot twrp.img, I tried to reboot and the device booted himself in fastboot with the enter reason "error boot prepare" and I can't boot into the system or recovery.
I tried to flash the official image downloaded from the Google Developers website, but when i run ./flash-all.sh, console get stuck. I waited for about 15 minutes but nothing. I tried even the official Android Flash Tool but after 10 seconds it says "Your device stopped responding. You may have to select restart in the bootloader menu in order for it to be recognised again."
Does anyone know how to help me? Thanks in advance.
Click to expand...
Click to collapse
Do you have tryied to run the official google tool in Windows to try to rescue it?
Estebiu said:
Do you have tryied to run the official google tool in Windows to try to rescue it?
Click to expand...
Click to collapse
Yes, I wrote in the post, I tried both the command line tool and the chrome version. Btw i'm on linux
Okay so, I fixed.
For anyone who will have this problem you just need to flash official Android 9 and next Android 10. Only with Android 10 you can use fastboot flash boot recovery.img (you can't use twrp in android 10 with the Pixel 3a)
GioPan_ said:
Okay so, I fixed.
For anyone who will have this problem you just need to flash official Android 9 and next Android 10. Only with Android 10 you can use fastboot flash boot recovery.img (you can't use twrp in android 10 with the Pixel 3a)
Click to expand...
Click to collapse
I'll try this...
GioPan_ said:
Okay so, I fixed.
For anyone who will have this problem you just need to flash official Android 9 and next Android 10. Only with Android 10 you can use fastboot flash boot recovery.img (you can't use twrp in android 10 with the Pixel 3a)
Click to expand...
Click to collapse
Does this work if adb not working? I only have fastboot.
WriteLovey said:
Does this work if adb not working? I only have fastboot.
Click to expand...
Click to collapse
It depends if your pc were authorized, if it was, you can use fastboot to flash the stock version of Android 9, just running the flash-all(.bat) script.
GioPan_ said:
It depends if your pc were authorized, if it was, you can use fastboot to flash the stock version of Android 9, just running the flash-all(.bat) script.
Click to expand...
Click to collapse
I'm not certain I understand what you mean by PC authorized? I'm using a Windows 10 tablet. When the phone is attached to the computer it sees it as a device that can be disconnected through USB.
WriteLovey said:
I'm not certain I understand what you mean by PC authorized? I'm using a Windows 10 tablet. When the phone is attached to the computer it sees it as a device that can be disconnected through USB.
Click to expand...
Click to collapse
All is well. I'm back on my Pixel, yeah!
GioPan_ said:
It depends if your pc were authorized, if it was, you can use fastboot to flash the stock version of Android 9, just running the flash-all(.bat) script.
Click to expand...
Click to collapse
I just had an encounter with this. I was rooting my device (Pixel 3A) and messed up my partitions through accidentally attempting a downgrade which broke all my ****. I was unable to easily reset this device to factory, so it took me several days to figure out and root. I'm getting better though as a hacker, because a year ago this would have taken me a month.
I was able to enter recovery mode (lying down Android, NO COMMAND). From this recovery mode, adb devices -l recognized my device, although I was unable to get a shell.
At first, ADB was telling me the device was authorized, but I messed with a bunch of other stuff (tried to flash a bunch of different partitions and monkey around in general trying to install Magisk) and then ADB started telling me it wasn't authorized when I used devices -l.
Once it said unauthorized, I was unable to issue the device any commands with ADB, so I just used hardware keys to get into recovery mode. From there, I selected OTA update, and it got into sideload mode. At that point, I used adb sideload with the OTA package that I downloaded here https://developers.google.com/android/ota
^^^ That operation did successfully restore my device to factory
This following guide here describes the details of how to use hard keys to enter recovery on this phone (don't download anything from there tho, and make sure your adblock is on)
How to Hard Reset your new Google Pixel 3a [Tutorial]
In this article, you will learn how to start your Google Pixel 3a up into the Recovery Mode and perform the Hard Reset to make it work perfectly again.
thedroidguy.com
I just wanted to say, I've been wrestling this hardbrick for a couple of days with my Pixel 3a.
I've finally overcome it by sideloading the most recent OTA update after using a hard key combo to get into recovery mode. The hard key combo is hold Power Button, tap Volume Up, then release both. Then, all you need is to use the command:
adb sideload <OTA.zip>
^^^OTA wasn't the actual filename though, you can download OTA packages for Pixel 3A here: https://developers.google.com/android/ota
the OTA binaries are NOT the same as the factory images, which is here
Factory Images for Nexus and Pixel Devices | Google Play services | Google for Developers
developers.google.com
Sideloading the OTA package brought my phone back from only having fastboot and recovery mode, even when flash-all.sh from the official downloaded firmware failed. Now I know how to undo damage that I cause by rooting this thing. Since I sideloaded newest firmware, it was also like applying an update. I easily got root after that, and I've logged the process. I'll make it into a guide soon
I'll just note that if you accidentally flashed the TWRP boot image instead of simply booting into it, I believe all you have to do is flash the stock boot.img to fix the problem. Obviously you can sideload the entire rom image, but that shouldn't be necessary.
Using the Windows computer (or whatever computer you are sending ADB commands from), download the full stock image directly from Google. Unzip it and then upzip the folder inside. You should find the boot.img file inside that folder. Take that file and then flash it to the phone using the normal ADB command: fastboot flash boot boot.img
While I haven't tried this myself recently, it should work in theory. The command "fastboot flash boot twrp.img" flashes the boot partition with a non-working twrp image, so replacing the faulty image with the stock boot.img should fix the problem.
If I did the same I would first attempt to manually put device in bootloader/aka fastboot mode then fastboot flash the stock boot.img , sudo fastboot flash boot boot.img --slot all
I only read the op (first post here);but I betcha that would have worked. Then sudo ./flash-all.sh and let it do it's thing.
Related
so there I was in my car, my phone plugged in via aux cable and playing some music
suddenly I notice the music stops and my phone goes into a reboot,
I was using a pure nexus rom on marshmallow ( the latest marshmallow one i believe) and had xposed, and sometimes my phone would randomly reboot,
it was annoying but I could live with it
so i thought it was having another one of it's moment
but now it doesn't actually reboot,
my phone is stuck in a reboot loop and I can't even get into recovery mode, (I had TWRP installed and could boot into it numerous times before this)
anyone have any ideas?
I've installed twrp via fastboot
but I can't use the adb command to boot into recovery since device is not found,
when i try
adb devices
the list is empty,
and yes I've installed the latest google drivers via android studio
I've installed hi-suite
someome please help
jay0514 said:
so there I was in my car, my phone plugged in via aux cable and playing some music
suddenly I notice the music stops and my phone goes into a reboot,
I was using a pure nexus rom on marshmallow ( the latest marshmallow one i believe) and had xposed, and sometimes my phone would randomly reboot,
it was annoying but I could live with it
so i thought it was having another one of it's moment
but now it doesn't actually reboot,
my phone is stuck in a reboot loop and I can't even get into recovery mode, (I had TWRP installed and could boot into it numerous times before this)
anyone have any ideas?
I've installed twrp via fastboot
but I can't use the adb command to boot into recovery since device is not found,
when i try
adb devices
the list is empty,
and yes I've installed the latest google drivers via android studio
I've installed hi-suite
someome please help
Click to expand...
Click to collapse
Hi... You can't use adb commands while in bootloader... Only fastboot commands. Use the volume rocker till you see recovery mode displayed and press power button. If it still bootloop, try formatting cache and data with fastboot in bootloader and reboot in recovery again. If it still bootloop. Finally try fastboot flash a stock Google image. If none of these steps work, your phone is probably dead and you'll have to try to RMA your N6P.
Check this thread for further infos: https://forum.xda-developers.com/nexus-6p/help/boot-loop-death-nexus-6p-t3533528/page21
5.1 said:
Hi... You can't use adb commands while in bootloader... Only fastboot commands. Use the volume rocker till you see recovery mode displayed and press power button. If it still bootloop, try formatting cache and data with fastboot in bootloader and reboot in recovery again. If it still bootloop. Finally try fastboot flash a stock Google image. If none of these steps work, your phone is probably dead and you'll have to try to RMA your N6P.
Check this thread for further infos: https://forum.xda-developers.com/nexus-6p/help/boot-loop-death-nexus-6p-t3533528/page21
Click to expand...
Click to collapse
ohhh i see
yeh I dones't let me get to the recovery mode in the options from bootloader
and what are the commands to format cache and data in fastboot??
5.1 said:
Hi... You can't use adb commands while in bootloader... Only fastboot commands. Use the volume rocker till you see recovery mode displayed and press power button. If it still bootloop, try formatting cache and data with fastboot in bootloader and reboot in recovery again. If it still bootloop. Finally try fastboot flash a stock Google image. If none of these steps work, your phone is probably dead and you'll have to try to RMA your N6P.
Check this thread for further infos: https://forum.xda-developers.com/nexus-6p/help/boot-loop-death-nexus-6p-t3533528/page21
Click to expand...
Click to collapse
and im trying to flash a stock google image
im following steps from the official android page
but how do I execute a .sh file?
the instruction is to go to the folder with files and execute 'flash-all.sh'
jay0514 said:
and im trying to flash a stock google image
im following steps from the official android page
but how do I execute a .sh file?
the instruction is to go to the folder with files and execute 'flash-all.sh'
Click to expand...
Click to collapse
First try:
fastboot format cache
fastboot format userdata
If the above doesn't solve your issue it's probably dead...
Check this thread for factory image flashing tutorial: https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928/page552
Good luck...
5.1 said:
First try:
fastboot format cache
fastboot format userdata
If the above doesn't solve your issue it's probably dead...
Check this thread for factory image flashing tutorial: https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928/page552
Good luck...
Click to expand...
Click to collapse
followed the guide to install stock rom,
still in reboot loop
how can a fine phone just die suddenly? :S
jay0514 said:
followed the guide to install stock rom,
still in reboot loop
how can a fine phone just die suddenly? :S
Click to expand...
Click to collapse
Sorry... Known issue with the N6P... Have you checked the tread I linked you in my first answer?
Good luck...
jay0514 said:
and im trying to flash a stock google image
im following steps from the official android page
but how do I execute a .sh file?
the instruction is to go to the folder with files and execute 'flash-all.sh'
Click to expand...
Click to collapse
Fastboot flash-all.sh is for Mac computers so presumably you have a Mac. Flash-all.bat is for windows. You need to unzip the Google image and move everything into the same folder where you have the fastboot program. Just open a command prompt window inside that folder and type the command. That's how I do it in Windows. Presumably the process is similar with a Mac. You will still have a zipped archive after you unzip the Google image but you want to leave that one as is. So far flashing flash-all.bat has gotten me out of every boot loop I've gotten into on my 6P but my phone never spontaneously bootlooped. I was always doing something (updating a rom, trying to restore a nandroid backup) that resulted in a bootloop. The fact that your phone boot looped without warning is probably a bad sign. If you still have warranty I would try to flash stock and see if you can RMA phone. If that isn't possible you might want to try staying on stock or using a different rom and seeing if the random reboots still occur. Good luck.
Well that really sucks. Sorry for your loss but it is a long running phone failure problem. I'm on my second 6P because this. Even worse to me is the fact your were running almost the exact same setup I am now. I refrained from running 7.x.x to try and minimize my chances of another BLOD so now w4on knows what to do. Lol
Sent from my Nexus 6P using XDA-Developers Legacy app
I've had my Essential two weeks i was on 8.1 beta.Today i unlocked the boot loader.Then installed twrp while in twrp i side loaded magisk.I went back to fastboot then hit start .The phone just went into a bootloop.I Was able to go back to twrp 2 times but now i can't get back to any type of recovery.I Can get back to fastboot mode ishow all the info and secure boot says yes and device state unlocked.My pc see essential phone fastboot in the device manager but i can't get adb to see it .Can anyone help me ?
forgot something
looks like i skipped this part . Once you're in TWRP, install the stock boot image and then the Magisk/SuperSU zip.Is there anything i can do?
videodave1 said:
I've had my Essential two weeks i was on 8.1 beta.Today i unlocked the boot loader.Then installed twrp while in twrp i side loaded magisk.I went back to fastboot then hit start .The phone just went into a bootloop.I Was able to go back to twrp 2 times but now i can't get back to any type of recovery.I Can get back to fastboot mode ishow all the info and secure boot says yes and device state unlocked.My pc see essential phone fastboot in the device manager but i can't get adb to see it .Can anyone help me ?
Click to expand...
Click to collapse
adb only works while phone is booted into system so nothing wrong there. If you're in the bootloader menu where you see that the status of your device is unlocked then you're already in fastboot mode. Just flash twrp again and the sideload stock 8.1 beta boot image (you can probably find it on xda), sideload magisk too. Go into install and press flash image file and find the stock boot image and then go into install again and change to flash .zip and flash magisk. After that, reboot into system.
WOW thank you so much'
Arju said:
adb only works while phone is booted into system so nothing wrong there. If you're in the bootloader menu where you see that the status of your device is unlocked then you're already in fastboot mode. Just flash twrp again and the sideload stock 8.1 beta boot image (you can probably find it on xda), sideload magisk too. Go into install and press flash image file and find the stock boot image and then go into install again and change to flash .zip and flash magisk. After that, reboot into system.
Click to expand...
Click to collapse
I was able to flash twrp i'll try the rest when i get home from work
sideloading stock img
videodave1 said:
I was able to flash twrp i'll try the rest when i get home from work
Click to expand...
Click to collapse
Do i need it to be zipped I've tried it as image that i downloaded from xda and I've tried a zip i got from Essential neither are working?
zip file
videodave1 said:
Do i need it to be zipped I've tried it as image that i downloaded from xda and I've tried a zip i got from Essential neither are working?
Click to expand...
Click to collapse
When i try i get invalid file format. This is using a zip i got from Essential.
Stuck twrp says no os installed . But i did learn how to push files.
just trying to get back to stock now
videodave1 said:
just trying to get back to stock now
Click to expand...
Click to collapse
https://forum.xda-developers.com/essential-phone/development/stock-7-1-1-nmj20d-t3701681
thanks been there tried the Oreo beta that is what i was on when i started and tried the 1st build before the betas i get an error on both i'll try to download them on another pc my phone does show up when i type fastboot devices now just need an os now .
Okay got back to 8.1 bootloader still unlocked twrp not install and i don't have root.I may just wait until P comes out.I'll try and learn more about adb. Thanks for your help Arju.
thanks everyone.
videodave1 said:
Okay got back to 8.1 bootloader still unlocked twrp not install and i don't have root.I may just wait until P comes out.I'll try and learn more about adb. Thanks for your help Arju.
Click to expand...
Click to collapse
No problem. Thank you very much for the donation, that was really kind of you. Hey I'm sure you'll get the hang of it before android P drops. you did figure out what went wrong all by yourself so get a hold of the right boot.img and the rest is exactly as how you did it in the first place but flash the boot.img before magisk. Let me know if you want to give it a dive again.
I'm on 8.1 boot loader unlocked and ready to try to root again .Thanks for the help
This is the closest thread i could find to what is happening to my PH-1.
Like videodave1 I 'was' running the latest stock 8.1 and have my bootloader unlocked. In trying to root the phone I did this:
flash boot flash boot twrp.img
adb shell twrp sideload
adb sideload magisk.zip
All installations went well, but when trying to reboot from twrp it forced me to install the app. After that the phone went into boot loop.
* Note how I didn't sideloaded the Oreo 8.1 image before magisk.
By pressing all 3 buttons I can get the phone to reboot and releasing the volume up I can get to Fastboot. Just volume down and power doesn't work.
The problem now is that adb and fastboot no longer recognise the phone. adb devices just gives an empty list and fastboot only shows < waiting for device >
Trying to go into Recovery mode doesn't work either. Power off doesn't work and Restart bootloader, well, restarts the bootloader.
It might be relevant to mention that I'm running adb and fastboot from Terminal in a Mac and that this is my very first and frustrated attempt to root any phone.
For reference this is what the FastBoot Mode brings:
PRODUCT_NAME - Mata
VARIANT - OPENUS
BOOTLOADER VERSION - mata-aad8ac4
BASEBAND VERSION - 2.0.C4-M1.3.1
SECURE BOOT - yes
DEVICE STATE - unlocked
I might have to just resign myself to the ordinary land of unlocked full stock phones
Thanks very much
avocom said:
This is the closest thread i could find to what is happening to my PH-1.
Like videodave1 I 'was' running the latest stock 8.1 and have my bootloader unlocked. In trying to root the phone I did this:
flash boot flash boot twrp.img
adb shell twrp sideload
adb sideload magisk.zip
All installations went well, but when trying to reboot from twrp it forced me to install the app. After that the phone went into boot loop.
* Note how I didn't sideloaded the Oreo 8.1 image before magisk.
By pressing all 3 buttons I can get the phone to reboot and releasing the volume up I can get to Fastboot. Just volume down and power doesn't work.
The problem now is that adb and fastboot no longer recognise the phone. adb devices just gives an empty list and fastboot only shows < waiting for device >
Trying to go into Recovery mode doesn't work either. Power off doesn't work and Restart bootloader, well, restarts the bootloader.
It might be relevant to mention that I'm running adb and fastboot from Terminal in a Mac and that this is my very first and frustrated attempt to root any phone.
For reference this is what the FastBoot Mode brings:
PRODUCT_NAME - Mata
VARIANT - OPENUS
BOOTLOADER VERSION - mata-aad8ac4
BASEBAND VERSION - 2.0.C4-M1.3.1
SECURE BOOT - yes
DEVICE STATE - unlocked
I might have to just resign myself to the ordinary land of unlocked full stock phones
Thanks very much
Click to expand...
Click to collapse
Even though your phone does not show up its there wipe everything.Fallow what Arju said in his post.I got back to stock then took the 8.1 update i'm not rooted but my bootloader is still unlocked.Oh make sure you unlock critical
videodave1 said:
Fallow what Arju said in his post.
Click to expand...
Click to collapse
Thanks for coming back to me. I really appreciate it.
Arju said:
Just flash twrp again and the sideload stock 8.1 beta boot image (you can probably find it on xda), sideload magisk too.
Click to expand...
Click to collapse
I might be missing something hopefully obvious here. How can I flash twrp again if I my computer can't see the phone. With the USB phone plugged in and in the FastBoot screen I enter into Terminal:
fastboot flash boot twrp.img
and I get:
< waiting for any device >
How do I flash it from the FastBoot screen? BTW, going to Recovery mode just hangs at the Essential logo.
Thanks
avocom said:
Thanks for coming back to me. I really appreciate it.
I might be missing something hopefully obvious here. How can I flash twrp again if I my computer can't see the phone. With the USB phone plugged in and in the FastBoot screen I enter into Terminal:
fastboot flash boot twrp.img
and I get:
< waiting for any device >
How do I flash it from the FastBoot screen? BTW, going to Recovery mode just hangs at the Essential logo.
Thanks
Click to expand...
Click to collapse
are you able to get to the bootloader menu? where it says start on the top.
Arju said:
are you able to get to the bootloader menu? where it says start on the top.
Click to expand...
Click to collapse
Thanks Arju. If you are referring to the FastBoot menu where you can use the up and down volume keys to select Start, Restart Bootloader, Recovery mode and Power off Yes, but not much else unfortunately.
If I select Recovery mode I don't go to the screen with the blue buttons from twrp.
Thanks
avocom said:
Thanks Arju. If you are referring to the FastBoot menu where you can use the up and down volume keys to select Start, Restart Bootloader, Recovery mode and Power off Yes, but not much else unfortunately.
If I select Recovery mode I don't go to the screen with the blue buttons from twrp.
Thanks
Click to expand...
Click to collapse
What you need to understand is that twrp will not stick after you flash it. This device does not have a recovery partition and that's why you replace the boot partition with twrp and while you're in twrp you need to flash the boot.img back and whatever mods on top of that such as kernel etc.. If you flash a rom then it will replace the twrp with the boot.img found in the rom zip.
So now we need the computer to recognize you device. Could you unplug the cable and change the usb port on you computer. connect your phone while you're in the bootloader menu where it says start on the top.
The use use fastboot command: fastboot devices
See if the computer recognizes you device.
Note: I am no expert at this. I used this to get TWRP and root, but it there is no guarentee it won't brick your phone. Only do this if you know what your doing. Before you start you must have an unlocked bootloader, which will delete all your data. Here's the instructions (If you need help, feel free to post a comment):
Download Magisk's installer zip on your phone from https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 (Google Pay only works with Magisk v19.0+)
Download arter97's kernel .img to your PC. This kernel currently is the only reliable way to get TWRP. https://forum.xda-developers.com/razer-phone-2/development/arter97-kernel-razer-phone-2-t3914996
Reboot your phone into bootloader mode (Turn off then back on while holding vol down).
Make sure your phone is recognized by Windows before proceeding. Follow this guide to setup the proper drivers and fastboot.
Flash arter97's kernel by running
Code:
fastboot flash boot arter97-kernel-*.img
If you run into any issues, then you will probably need to specify the slot to flash. Reboot back into your system.
Turn on Android Debugging and run
Code:
adb shell getprop ro.boot.slot_suffix
and make note if the output is _a or _b
Reboot back into bootloader
If _a use
Code:
fastboot flash boot_a arter97-kernel-*.img
if _b use
Code:
fastboot flash boot_b arter97-kernel-*.img
Reboot to recovery (either through bootloader mode or hold vol up while rebooting).
Install the Magisk .zip from TWRP.
Be amazed by the possibilities.
Old instructions (Should always work to get root):
Download the factory image from here: https://developer.razer.com/razer-phone-dev-tools/
Extract and copy the boot.img file to your device
Download and install Magisk Manager. If you have an SD card make sure it's installed on your internal storage, not the SD card.
Tap install, select Patch Boot Image File, and select the boot.img (If using the default file manager click the overflow menu and show internal storage)
Copy the patched_boot.img back over to your PC
Flash the patched_boot.img to your device via fastboot (Turn off then back on while holding vol down) and run
Code:
fastboot flash boot patched_boot.img
.
If you run into any issues, then you will need to specify the slot to flash.
Turn on Android Debugging and run
Code:
adb shell getprop ro.boot.slot_suffix
and make note if the output is _a or _b
Reboot back into bootloader
If _a use
Code:
fastboot flash boot_a patched_boot.img
if _b use
Code:
fastboot flash boot_b patched_boot.img
Reboot, and open up magisk manager to confirm everything is working. After an OTA update you may have to re-apply due to it using a different slot.
Note: the phone wasn't properly recognized by my computer when in bootloader mode so I had to install the Google adb drivers and manually set the driver used to Google Bootloader Interface (or something like that)
I found you needed to specify boot_a or boot_b specifically as the bootloader tended to mess up the suffix(it tried "bootb_b"????). So I had to first run "fastboot getvar all" to check the current slot.
I also found the commands are executed much more reliably if you enter the command first and press enter so fastboot goes into the "waiting for device" state and then boot into the bootloader and afterwards plug in the cable so fastboot executes the command as soon as it connects.
figured itd be as easy as that. this will be my first up to date device in years, att sending it to me in the mail. should get it by the 6th . but glad to see theres root! hopefully lineage to follow <3
Twiggy000b said:
figured itd be as easy as that. this will be my first up to date device in years, att sending it to me in the mail. should get it by the 6th . but glad to see theres root! hopefully lineage to follow <3
Click to expand...
Click to collapse
I know the feeling, my last device was the Nexus 5
my last "decent" device was the essential phone. then i went to the xperia xa2 ultra, then the iphone 6 then.... zte quest. -.-
CurtisMJ said:
I found you needed to specify boot_a or boot_b specifically as the bootloader tended to mess up the suffix(it tried "bootb_b"????). So I had to first run "fastboot getvar all" to check the current slot.
I also found the commands are executed much more reliably if you enter the command first and press enter so fastboot goes into the "waiting for device" state and then boot into the bootloader and afterwards plug in the cable so fastboot executes the command as soon as it connects.
Click to expand...
Click to collapse
Lol, bootb_b:laugh:. For me at least it worked fine without specifying the slot, though I may change the instructions to specify the slot
CalebQ42 said:
With the release of the factory images we can achieve root via Magisk boot image patching. Note: I am no expert at this. I used this to achieve root, but it there is no guarentee it won't brick your phone. Only do this if you know what your doing. Before you start you must have an unlocked bootloader. Here's the instructions (If you need help, feel free to post a comment):
Download the factory image from here: https://developer.razer.com/razer-phone-dev-tools/
Extract and copy the boot.img file to your device
Download and install Magisk Manager. If you have an SD card make sure it's installed on your internal storage, not the SD card.
Tap install, select Patch Boot Image File, and select the boot.img (If using the default file manager click the overflow menu and show internal storage)
Copy the patched_boot.img back over to your PC
Flash the patched_boot.img to your device via fastboot (Turn off then back on while holding vol down and run `fastboot flash boot patched_boot.img`.
Reboot, and open up magisk manager to confirm everything is working.
Note: the phone wasn't properly recognized by my computer so I had to install the Google adb drivers and manually set the driver to Google Bootloader interface (or something like that)
I also tried to install some Android Pie GSIs, but none of them worked.
Click to expand...
Click to collapse
Does this destroy all data? Do I need to unlock bootloader? Does it matter where I place the boot.img on my device?
CalebQ42 said:
Lol, bootb_b:laugh:. For me at least it worked fine without specifying the slot, though I may change the instructions to specify the slot
Click to expand...
Click to collapse
Interesting. The bootloader isn't exactly what I'd call a masterpiece of coding (weird cause I still maintain the ROM is excellent) so it might have just been a momentary glitch.
---------- Post added at 10:54 PM ---------- Previous post was at 10:53 PM ----------
ctakah27 said:
Does this destroy all data? Do I need to unlock bootloader? Does it matter where I place the boot.img on my device?
Click to expand...
Click to collapse
Yes, yes and not really (you get a file chooser so you just need to locate it)
I updated the post a bit with instructions on how to flash to a specific slot.
Tonight I'm going to try compiling TWRP for the first time ever (unless someone beats me to in). Wish me luck!
CalebQ42 said:
I updated the post a bit with instructions on how to flash to a specific slot.
Tonight I'm going to try compiling TWRP for the first time ever (unless someone beats me to in). Wish me luck!
Click to expand...
Click to collapse
Good luck it's a easier process compare to years ago. I would do it but I have no need for root or custom recovery. If you fail on the TWRP I will do it in time for people.
Is this working on the AT&T version of this phone? Or would you need to flash the global firmware in order for this to work? Looking to upgrade to this phone and I want to be sure I can get root. The rest looks to be coming fairly quickly.
CalebQ42 said:
I updated the post a bit with instructions on how to flash to a specific slot.
Tonight I'm going to try compiling TWRP for the first time ever (unless someone beats me to in). Wish me luck!
Click to expand...
Click to collapse
jonchance_84 said:
Is this working on the AT&T version of this phone? Or would you need to flash the global firmware in order for this to work? Looking to upgrade to this phone and I want to be sure I can get root. The rest looks to be coming fairly quickly.
Click to expand...
Click to collapse
They have the image for AT&T
EAIaIQobChMIwYzbk7j_3gIVRZRpCh0RMwdoEAEYASAAEgLPifD_BwE
Warrior1988 said:
They have the image for AT&T
EAIaIQobChMIwYzbk7j_3gIVRZRpCh0RMwdoEAEYASAAEgLPifD_BwE
Click to expand...
Click to collapse
I see the separate firmware. I'm only asking because of past shadyness from AT&T trying to tell manufacturers what to do. Years ago on my Xperia x10, if on AT&T firmware, you needed to flash the global generic firmware to get around their crap.
CalebQ42 said:
With the release of the factory images we can achieve root via Magisk boot image patching. Note: I am no expert at this. I used this to achieve root, but it there is no guarentee it won't brick your phone. Only do this if you know what your doing. Before you start you must have an unlocked bootloader, which will delete all your data. Here's the instructions (If you need help, feel free to post a comment):
Download the factory image from here: https://developer.razer.com/razer-phone-dev-tools/
Extract and copy the boot.img file to your device
Download and install Magisk Manager. If you have an SD card make sure it's installed on your internal storage, not the SD card.
Tap install, select Patch Boot Image File, and select the boot.img (If using the default file manager click the overflow menu and show internal storage)
Copy the patched_boot.img back over to your PC
Flash the patched_boot.img to your device via fastboot (Turn off then back on while holding vol down) and run
Code:
fastboot flash boot patched_boot.img
.
If you run into any issues, then you will need to specify the slot to flash.
Turn on Android Debugging and run
Code:
adb shell getprop ro.boot.slot_suffix
and make note if the output is _a or _b
Reboot back into bootloader
If _a use
Code:
fastboot flash boot_a patched_boot.img
if _b use
Code:
fastboot flash boot_b patched_boot.img
Reboot, and open up magisk manager to confirm everything is working. After an OTA update you may have to re-apply due to it using a different slot.
Note: the phone wasn't properly recognized by my computer so I had to install the Google adb drivers and manually set the driver to Google Bootloader interface (or something like that)
I also tried to install some Android Pie GSIs, but none of them worked.
Click to expand...
Click to collapse
Would this procedure be the same as far as mac/win?
I understand all of that, I am simply asking if someone has tried this with the AT&T variant yet. I want to know before I go order this phone.
I love a rooted phone, but as far as I know, if you unlock the bootloader, Netflix will no longer work in HD mode. To me, this is a deal-breaker. If anyone knows about a work-around, I'd love to know.
Razer phone 2 root
so im kinda new to rooting this type of phone and to the android boot scheme in general. i have a razer phone 2 and have attempted (febaly) to root it using this meathod. after installing the google adb drivers i was unable to see the device from my pc when it was in fastboot and unable to send commands, after installing the drivers again with windows update it ran even though no device was detected with this message
">fastboot flash boot patched_boot.img
Sending 'boot_b' (19268 KB) OKAY [ 0.523s]
Writing 'boot_b' OKAY [ 0.179s]
Finished. Total time: 0.718s"
it then blackscreened, i then tried a factory reset from recovery, and it is now in a bootloop... any advice?
update: no longer in boot loop but now is full blackscreen after a glitchy install screen
andy1011 said:
so im kinda new to rooting this type of phone and to the android boot scheme in general. i have a razer phone 2 and have attempted (febaly) to root it using this meathod. after installing the google adb drivers i was unable to see the device from my pc when it was in fastboot and unable to send commands, after installing the drivers again with windows update it ran even though no device was detected with this message
">fastboot flash boot patched_boot.img
Sending 'boot_b' (19268 KB) OKAY [ 0.523s]
Writing 'boot_b' OKAY [ 0.179s]
Finished. Total time: 0.718s"
it then blackscreened, i then tried a factory reset from recovery, and it is now in a bootloop... any advice?
update: no longer in boot loop but now is full blackscreen after a glitchy install screen
Click to expand...
Click to collapse
Since it's already wiped the easiest way to fix it is to probably flash the full factory image. Did you happen to update to the MR2 update prior to following this guide? Doing this on MR2 will soft brick. Not entirely sure in what way, but I assume it would be similar to what you experienced. If you were still on MR0 you can actually just fastboot flash the original kernel image to fix it. I just finished rooting MR2 so I'll post that next
CurtisMJ said:
Since it's already wiped the easiest way to fix it is to probably flash the full factory image. Did you happen to update to the MR2 update prior to following this guide? Doing this on MR2 will soft brick. Not entirely sure in what way, but I assume it would be similar to what you experienced. If you were still on MR0 you can actually just fastboot flash the original kernel image to fix it. I just finished rooting MR2 so I'll post that next
Click to expand...
Click to collapse
this is what im trying to do. however i have no way of flashing to the device as adb is unable to see the device.
andy1011 said:
this is what im trying to do. however i have no way of flashing to the device as adb is unable to see the device.
Click to expand...
Click to collapse
Adb and fastboot are separate things. You should only need download mode and fastboot. What are you trying to use ADB for? If in doubt, the guide on Razer's website should be quite sufficient
EDIT: You can get to download mode by holding Vol Down and Power Button while the device is off. You can force reboot by holding down power for approx 15s as well
Hi - I am trying to reinstall TWRP on my OP6T after upgrading to OOS 10.3.0.
I am running Minimal ADB and Fastboot v1.4.3 on my Win10 PC. I have connected my phone to my PC, and entered Fastboot mode. The OP6T is detected when I do a fastboot devices command.
Next, I try doing a temporary Recovery Mode boot into TWRP with a fastboot boot twrp-3.3.1-1-fajita.img command. This is where I run into a problem ... While the Minimal ADB and Fastboot window says that the TWRP image was sent to the OP6T, I am still stuck on the Fastboot screen, and the phone is locked up and doesn't reboot the image.
What is going wrong?
¿GJ?
¿GotJazz? said:
Hi - I am trying to reinstall TWRP on my OP6T after upgrading to OOS 10.3.0.
I am running Minimal ADB and Fastboot v1.4.3 on my Win10 PC. I have connected my phone to my PC, and entered Fastboot mode. The OP6T is detected when I do a fastboot devices command.
Next, I try doing a temporary Recovery Mode boot into TWRP with a fastboot boot twrp-3.3.1-1-fajita.img command. This is where I run into a problem ... While the Minimal ADB and Fastboot window says that the TWRP image was sent to the OP6T, I am still stuck on the Fastboot screen, and the phone is locked up and doesn't reboot the image.
What is going wrong?
¿GJ?
Click to expand...
Click to collapse
I'm having the same problem
¿GotJazz? said:
Hi - I am trying to reinstall TWRP on my OP6T after upgrading to OOS 10.3.0.
I am running Minimal ADB and Fastboot v1.4.3 on my Win10 PC. I have connected my phone to my PC, and entered Fastboot mode. The OP6T is detected when I do a fastboot devices command.
Next, I try doing a temporary Recovery Mode boot into TWRP with a fastboot boot twrp-3.3.1-1-fajita.img command. This is where I run into a problem ... While the Minimal ADB and Fastboot window says that the TWRP image was sent to the OP6T, I am still stuck on the Fastboot screen, and the phone is locked up and doesn't reboot the image.
What is going wrong?
¿GJ?
Click to expand...
Click to collapse
3.3.1.-1???...
cultofluna said:
3.3.1.-1???...
Click to expand...
Click to collapse
Affirmative. Fajita 3.3.1-1. See attached screenshot from TWRP.me. Should I be booting into a different version?
¿GotJazz? said:
Affirmative. Fajita 3.3.1-1. See attached screenshot from TWRP.me. Should I be booting into a different version?
Click to expand...
Click to collapse
Those "official" TWRP builds don't work properly on Android 10. Here is a link to the one you need:
https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482
jp0469 said:
Those "official" TWRP builds don't work properly on Android 10. Here is a link to the one you need:
https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482
Click to expand...
Click to collapse
Thanks, @jp0469! This helps a lot!
Just to be clear (and to get to a successful conclusion without a bricked phone), I won't be installing a TWRP installer ZIP file after booting into this TWRP image (The old style method), but instead installing the same TWRP IMG file as a "Recovery RAM Disk", correct?
¿GJ?
¿GotJazz? said:
Thanks, @jp0469! This helps a lot!
Just to be clear (and to get to a successful conclusion without a bricked phone), I won't be installing a TWRP installer ZIP file after booting into this TWRP image (The old style method), but instead installing the same TWRP IMG file as a "Recovery RAM Disk", correct?
¿GJ?
Click to expand...
Click to collapse
Need a little more info before you proceed.
I know you said that you're currently on Android 10.3.0
Are you rooted with Magisk? If not, are you planning on rooting?
jp0469 said:
Need a little more info before you proceed.
I know you said that you're currently on Android 10.3.0
Are you rooted with Magisk? If not, are you planning on rooting?
Click to expand...
Click to collapse
I was rooted with Magisk, but that got lost when I did the 10.3.0 update. Definitely planning on TWRPing and rooting again, as long as it's safe.
¿GotJazz? said:
I was rooted with Magisk, but that got lost when I did the 10.3.0 update. Definitely planning on TWRPing and rooting again, as long as it's safe.
Click to expand...
Click to collapse
Stick to good old ones...
Once booted in twrp via fastboot flash the installer zip. It has always worked and will always. Always latest version. And flash Magisk after.
¿GotJazz? said:
I was rooted with Magisk, but that got lost when I did the 10.3.0 update. Definitely planning on TWRPing and rooting again, as long as it's safe.
Click to expand...
Click to collapse
Put the latest Magisk zip and TWRP installer (zip file) on your phone's internal memory if you don't already have them there. Now you can fastboot boot the TWRP img file (Q version). Next flash the TWRP zip to permanently install TWRP into recovery. Reboot back to recovery to make sure it worked and then flash Magisk to re-gain root.
Reboot
Thanks, guys - The only reason I asked about the alternate "RAM Disk" method was because it was listed as the installation method by the developer on the link that @jp0469 provided earlier.
I'll try the old-fashioned method, since y'all say that it works OK.
I have a brand new hp windows 10 PC and a new op6t converted to international version. Running pie latest oxygen os. I need to get minimal adb fastboot installed so I can install twrp and root. Ik it's a little different process to get twrp on 6t but I need some help. Can someone provide me with the correct fastboot to install
[email protected] said:
I have a brand new hp windows 10 PC and a new op6t converted to international version. Running pie latest oxygen os. I need to get minimal adb fastboot installed so I can install twrp and root. Ik it's a little different process to get twrp on 6t but I need some help. Can someone provide me with the correct fastboot to install
Click to expand...
Click to collapse
I always install the latest directly from Google. There is a link on this page to the latest version of Windows ADB and Fastboot. Just unzip the file you download into a directory of your choice.
Everytime I try to boot twrp It says waiting on device. What's that mean
[email protected] said:
Everytime I try to boot twrp It says waiting on device. What's that mean
Click to expand...
Click to collapse
It mean you didn't install driver on your PC.
---------- Post added at 03:38 AM ---------- Previous post was at 03:35 AM ----------
¿GotJazz? said:
Hi - I am trying to reinstall TWRP on my OP6T after upgrading to OOS 10.3.0.
I am running Minimal ADB and Fastboot v1.4.3 on my Win10 PC. I have connected my phone to my PC, and entered Fastboot mode. The OP6T is detected when I do a fastboot devices command.
Next, I try doing a temporary Recovery Mode boot into TWRP with a fastboot boot twrp-3.3.1-1-fajita.img command. This is where I run into a problem ... While the Minimal ADB and Fastboot window says that the TWRP image was sent to the OP6T, I am still stuck on the Fastboot screen, and the phone is locked up and doesn't reboot the image.
What is going wrong?
¿GJ?
Click to expand...
Click to collapse
Type Command: fastboot flash boot
And Use TWRP 3.3.1.30 .
Hi - I am trying to reinstall TWRP on my OP6T after upgrading to OOS 10.3.0.
I am running Minimal ADB and Fastboot v1.4.3 on my Win10 PC. I have connected my phone to my PC, and entered Fastboot mode. The OP6T is detected when I do a fastboot devices command.
Next, I try doing a temporary Recovery Mode boot into TWRP with a fastboot boot twrp-3.3.1-1-fajita.img command. This is where I run into a problem ... While the Minimal ADB and Fastboot window says that the TWRP image was sent to the OP6T, I am still stuck on the Fastboot screen, and the phone is locked up and doesn't reboot the image.
What is going wrong?
Click to expand...
Click to collapse
same thing happened to me, but my screen went black and i cant seem to turn it back on again. what a day. fml
i really need help, i only have that one phone for daily usage. arghhhh
uncleheng said:
same thing happened to me, but my screen went black and i cant seem to turn it back on again. what a day. fml
i really need help, i only have that one phone for daily usage. arghhhh
Click to expand...
Click to collapse
press volume down,up and power button same time for 10sec your phone will boot to bootloader mode.
After doing the fastboot boot twrp-3.3.1-30-fajita-Q-mauronofrio.img in Fastboot Mode, I installed twrp-3.3.1-30-fajita-installer-mauronofrio.zip in the booted TWRP Recovery Mode, and everything is working fine again.
Thanks, guys!
Hey I am running Android 10.3.7 and am having the same problem, I tried unofficial twrp linked abouve and still stuck on fastboot screen, I think I'm using abd 1.43, if twrp doesn't work is there an alternative? I'm newish to rooting I've rooted other phones but that was back in the good old days where it wasn't complicated. I am running a T-Mobile phone converted to international with bootloader unlocked
I have been on a journey trying to go back to my T-Mobile OnePlus 6T back as my daily driver but the official updates killed the device for me. I have been successful in flashing it to the international version and now the device is on A9. I am trying to get it updated to A10 but in order do that (does not take OTA updates or can not flash within the updates app) I have to flash in recovery. Right now it is on stock recovery so I am trying to flash TWRP.
The problem is now that everytime I run the command " fastboot boot IMAGENAME.img" the phone restarts (as expected) and boots into fastboot but stays stuck in the Fastboot Mode screen.
I tried different TWRP images (older and the most current version per https://dl.twrp.me/fajita/ ) but I keep getting stuck in the Fastboot Mode screen. The last thing I was able to do without issues was unlock bootloader using fastboot.
I just need to be able to flash TWRP on the phone so I can still the final stock image so I can go back to using it as my DD.
EDIT: Disregard everything I fixed it. mods, please delete thread.
EDITR 2: Disregard that last edit lol Yeah I still need help. I am now tryingto flash twrp on a second 6T and the issue described above still applies.
You can try this version. Also try unplugging the USB after it reboots. You aren't getting any crash dump screen? So it should be working.
Brettroth said:
You can try this version. Also try unplugging the USB after it reboots. You aren't getting any crash dump screen? So it should be working.
Click to expand...
Click to collapse
Tried your image and still same result. I am running following command
Code:
fastboot boot TWRP-3.6.1_11-OP6xT.img
The command window outputs the following
Code:
Sending 'boot.img' (34964 KB) OKAY [ 0.747s]
Booting OKAY [ 0.092s]
Finished. Total time: 0.860s
The phone then reboots into Fastboot Mode logo and stays stuck there. I even tried unplugging the USB after it reboots as well.
I even tried using the flash command instead of boot but no success.
How about fastboot boot recovery? Should be able to get into recovery somehow. Doing fastboot flash of twrp will mess up your boot partition but either way you still should be able to get into recovery somehow. There is the msm recovery tool you can use as last resort but it will relock your bootloader
Actually fastboot doesn't let you use boot recovery command I don't think. Only adb. But once you are in fastboot can't you choose to reboot recovery with volume keys?
Brettroth said:
How about fastboot boot recovery? Should be able to get into recovery somehow. Doing fastboot flash of twrp will mess up your boot partition but either way you still should be able to get into recovery somehow. There is the msm recovery tool you can use as last resort but it will relock your bootloader
Click to expand...
Click to collapse
I tried doing fastboot boot recovery but i get following error
Code:
fastboot: error: cannot load 'recovery': No such file or directory
Brettroth said:
Actually fastboot doesn't let you use boot recovery command I don't think. Only adb. But once you are in fastboot can't you choose to reboot recovery with volume keys?
Click to expand...
Click to collapse
When I am in fastboot mode, yes I can choose recovery but it takes me to the stock recovery. I do not have a option to flash any zip files there
Maybe you need a twrp for Android 9 since that's what you are on. But fastboot boot twrp should just take you there. Either have to find one that works or go msm route. Maybe windows not reading it correctly also. You using CMD or PowerShell?
Brettroth said:
Maybe you need a twrp for Android 9 since that's what you are on. But fastboot boot twrp should just take you there. Either have to find one that works or go msm route. Maybe windows not reading it correctly also. You using CMD or PowerShell?
Click to expand...
Click to collapse
I tried both CMD and PowerShell. I am going to try a A9 version of twrp
EDIT: I am using twrp-3.6.1_9-0-fajita.img (which I assume is for A9) and still get the same result. Even tried a different usb port.. not sure what i could be missing. I also did the instructions as advised straight from twrp's website.
smartinez832 said:
I tried both CMD and PowerShell. I am going to try a A9 version of twrp
EDIT: I am using twrp-3.6.1_9-0-fajita.img (which I assume is for A9) and still get the same result. Even tried a different usb port.. not sure what i could be missing. I also did the instructions as advised straight from twrp's website.
Click to expand...
Click to collapse
I don't know bud. I guess msm tool is the way to go then
Curious did you have the twrp file in same folder as adb and fastboot?
smartinez832 said:
I have been on a journey trying to go back to my T-Mobile OnePlus 6T back as my daily driver but the official updates killed the device for me. I have been successful in flashing it to the international version and now the device is on A9. I am trying to get it updated to A10 but in order do that (does not take OTA updates or can not flash within the updates app) I have to flash in recovery. Right now it is on stock recovery so I am trying to flash TWRP.
The problem is now that everytime I run the command " fastboot boot IMAGENAME.img" the phone restarts (as expected) and boots into fastboot but stays stuck in the Fastboot Mode screen.
I tried different TWRP images (older and the most current version per https://dl.twrp.me/fajita/ ) but I keep getting stuck in the Fastboot Mode screen. The last thing I was able to do without issues was unlock bootloader using fastboot.
I just need to be able to flash TWRP on the phone so I can still the final stock image so I can go back to using it as my DD.
EDIT: Disregard everything I fixed it. mods, please delete thread.
EDITR 2: Disregard that last edit lol Yeah I still need help. I am now tryingto flash twrp on a second 6T and the issue described above still applies.
Click to expand...
Click to collapse
I'm having same issue with fajita (OnePlus 6T) you found any solution if yes then please give some reply