Database Users

Xperia X10 DavinciTeam Flashing error

Hi,
I tried to flash my Xperia X10 with DavinciTeam but I get the following error;
(#) DaVinci Service Client v22.76 (User: 50250 / Credits: 10)
New Device Connected On USBF1
Device Identification Started...
The IMEI of the product is:
35941903237050
Model info:
X10i
Security info:
Color: Red
LDR/SW/CUST AIDs: 0001/0001/0001
EROM info:
S1_EROM R8A013 1226-2253 [20100119 17:24:00]
Software info:
1227-4612_R2BA020
Customization info:
1235-7379 R9A
Language info:
1227-4607_R2BA020
Identification Time - 00:00:02
Done!
Service Selection Started...
Getting Software List From Server For: X10 / 0001 / Red...
SELECTED: Flash / Debrand / Re-Brand [SonyEricsson] X10 / 0001 / Red / R1FA014 / 3 AU/SENSUOUS BLACK (1234-4828/R8A | NAM1)
Script Execution Started...
Checking Files...
Starting up...
Script initialization. Please wait...
Loading S1 Loader... OK
20091222 15:39:00 S1_LOADER R4A024 1226-2250
Memory Stick: 8GB
Opening TA...FAILED
Reading TA Please Wait...FAILED
Execution Time - 00:00:09
Done!
Can somebody help me please.
Thank You

Ask the Davinci team theyre probably your best bet seeing as though you paid for it your entitled to help with their product.

riff jtag for i9000m

hi
i have a fully braked phone completely black and i want to flash it using the riff box so should i use the i9000 boot loader
i did that and i get this error
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.21
Selected Resurrector: [Samsung I9000]
Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box.
so what i am missing hear

any one done it before

[Q] Product Code: Not Active, HW Version: Not Active

After completing an IMEI Null/Unknown Baseband repair, I still have an issue with:
Product Code: Not Active
HW Version: Not Active
RF Cal Date: None
My IMEI and serial number are once again correct and the phone obtains a signal however it cannot connect to a network. I've installed the original firmware. My Samsung Tool log (Z3X box) is listed below. While I've attempted to repair the Product Code with my Z3X, it doesn't appear despite a "Repair Done" log.
Any suggestions on where to start first to repair a product code and HW version?
Thanks
Operation: Write EFS
Selected model: SGH-I337M
Selected port: COM9 SAMSUNG Mobile USB Serial Port
Software version: 21.7
Waiting ADB device... OK
Reading phone info...
Model: SGH-I337M
Android version: 4.4.2
Product code: Not Active
Phone version: I337MVLUFNI2
PDA version: I337MVLUFNI2
CSC version: I337MOYAFNI2
CSC country code: Canada
CSC sales code: TLS
HW version: Not Acti
Phone S/N: R31XXXXXX
Modem board: MDM9215M
RF cal date: NONE
IMEI: 35579405XXXXXXX
Checking Super user right... true
Extracting EFS file... OK
Converting img to ext4... OK
Writing EFS to phone... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.21.7

How to determine the status of Honor 3c (H30-U10)'s bootloader ?!!

Hi to all of dear developers and specialists ...
I want to speak somewhat regarding My smartphone H30-U10 ...
The subject is that i recently finded out this subject that the status of my smartphone's bootloader is unknown ..
Maybe you want to ask me what it means .. look, I searched on many websites and databases which proposed the methods in determining the status of the bootloader whether it is locked or unlocked such as entering the code *#*#7378423#*#* in dial pad and even going to ABD & Fastboot and typing commands such as fastboot oem device-info to check it's status while my smartphone was in fastboot mode, but nevertheless my smartphones is recognized by typing "adb devices" in ADB command prompt, i didnot receive any response from adb and only message " waiting" was typed under command that i entered ..By the way, i dont see any option namely "OEM Unlocking" in Developer options in setting and ONLY i see "USB debugging" .I think it is strange.
A few nights ago, i tried to obtain a report from my smartphone and it is attached below . Indeed i noticed that the state of my smartphone's bootloader is unknown .. You can see it
Here, What does "Unknown" mean ? Does It mean locked ?
But one another subject that i think that is in association with mentioned above one is that i tried to obtain My H30-U10's "Product id" Via typing the code *#*#1357946#*#* in dial pad but no windows was pop uped. I even mailed several times to Huawei and sent box and proof of my smartphone for them but they said that we unfortunately dont have any product id on our systems for these imei and another information !!!!!
And final subject is that i went to fastboot mode but there i saw ONLY a message " fastboot " and representation robot android and i didnot see any another test regarding bootloader and others ....
I think that all of these subjects or it's better to say all of problems are associated with each other ..
I want to know if bootloader in this case, is locked or not .
Thanks so much
REPORT :
========================================================
== dumpstate: 2017-03-19 13:57:42
========================================================
Build: H30-U10 V100R001C900B129
Build fingerprint: 'Huawei/H30-U10/hwH30-U10:4.2.2/HuaweiH30-U10/C900B129:user/ota-rel-keys,release-keys'
Bootloader: unknown
Radio: unknown
Network: Irancell
Kernel: Linux version 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 9 14:38:10 CST 2015
Command line: console=ttyMT0,921600n1 vmalloc=496M slub_max_order=0 lcm=1-cmi_otm1282a_hd720_dsi_cmd fps=6101 bootprof.pl_t=1515 bootprof.lk_t=1500 printk.disable_uart=1 boot_reason=0

allahyarime said:
Hi to all of dear developers and specialists ...
I want to speak somewhat regarding My smartphone H30-U10 ...
The subject is that i recently finded out this subject that the status of my smartphone's bootloader is unknown ..
Maybe you want to ask me what it means .. look, I searched on many websites and databases which proposed the methods in determining the status of the bootloader whether it is locked or unlocked such as entering the code *#*#7378423#*#* in dial pad and even going to ABD & Fastboot and typing commands such as fastboot oem device-info to check it's status while my smartphone was in fastboot mode, but nevertheless my smartphones is recognized by typing "adb devices" in ADB command prompt, i didnot receive any response from adb and only message " waiting" was typed under command that i entered ..By the way, i dont see any option namely "OEM Unlocking" in Developer options in setting and ONLY i see "USB debugging" .I think it is strange.
A few nights ago, i tried to obtain a report from my smartphone and it is attached below . Indeed i noticed that the state of my smartphone's bootloader is unknown .. You can see it
Here, What does "Unknown" mean ? Does It mean locked ?
But one another subject that i think that is in association with mentioned above one is that i tried to obtain My H30-U10's "Product id" Via typing the code *#*#1357946#*#* in dial pad but no windows was pop uped. I even mailed several times to Huawei and sent box and proof of my smartphone for them but they said that we unfortunately dont have any product id on our systems for these imei and another information !!!!!
And final subject is that i went to fastboot mode but there i saw ONLY a message " fastboot " and representation robot android and i didnot see any another test regarding bootloader and others ....
I think that all of these subjects or it's better to say all of problems are associated with each other ..
I want to know if bootloader in this case, is locked or not .
Thanks so much
REPORT :
========================================================
== dumpstate: 2017-03-19 13:57:42
========================================================
Build: H30-U10 V100R001C900B129
Build fingerprint: 'Huawei/H30-U10/hwH30-U10:4.2.2/HuaweiH30-U10/C900B129:user/ota-rel-keys,release-keys'
Bootloader: unknown
Radio: unknown
Network: Irancell
Kernel: Linux version 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 9 14:38:10 CST 2015
Command line: console=ttyMT0,921600n1 vmalloc=496M slub_max_order=0 lcm=1-cmi_otm1282a_hd720_dsi_cmd fps=6101 bootprof.pl_t=1515 bootprof.lk_t=1500 printk.disable_uart=1 boot_reason=0
Click to expand...
Click to collapse
Please dont worry about bootloader status message. Try to unlock it , if it does its ok . If not we have further solutions

My huawei 3c honor does not unbootloader...what i do i try all methods using cmd and tools method what i do...please help me

MOTOROLA E4 ! How to calculate SIMLOCK

Running NCK Dongle Android MTK 2.5.9.5
Dongle is original, only 1 month old !
I click read codes I get IMEI info and other data but no simlock is displayed !
So I try direct unlock and I get this !
Can anyone help ? (or calculate correct code for me) ?
Thanks
maxmix
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[25]META Port Detected: MediaTek USB VCOM (Android) (COM25)
USB\VID_0E8D&PID_2007\5&387589A8&0&1
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6737m,S01
[AP]APP_VER: alps-mp-n1.mp1-V1_lenovo6737m.35.n1_P105
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6735, E00
[META]SW_VER : ANDY.EMEA.V45
[META]HW_VER : LENOVO6737M_35_N1_HW
Phone imei[1] : 3565060***********
Start direct unlock[SIM1]
Simlock data not found(3).
Clean Boot flag ok.
All done.
maxmix