hi
i have a fully braked phone completely black and i want to flash it using the riff box so should i use the i9000 boot loader
i did that and i get this error
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.21
Selected Resurrector: [Samsung I9000]
Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box.
so what i am missing hear
any one done it before
Related
hi,
my first time on this site and i've been stuck to it for around 4 hrs.
i got a Qtek lately and thot to upgrade it which lead me to ur site when i registered i cudnt provide the correct information for my device there were no matching options. i goes like this
Model: PW10A1
Rom Version: 3.14.06 Eng
Radio Version: T313
Later, when i downloded SER 1.2 and tried to run it, in the command prompt that appears frst on it said
ERROR: GetDeviceData - Unspecified error
error getting devicedata
and further onwards
ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR
Cannot execute the remote communication program.
Please make sure that the USB/ Serial cable is propoerly connected
Everything was connected, activesync was running fine too, copying installing, i checked everything
i am fairly new to the handhelds, wud appriciate help
btw i am in UAE and the network is Etisalat
Hi,
I tried to flash my Xperia X10 with DavinciTeam but I get the following error;
(#) DaVinci Service Client v22.76 (User: 50250 / Credits: 10)
New Device Connected On USBF1
Device Identification Started...
The IMEI of the product is:
35941903237050
Model info:
X10i
Security info:
Color: Red
LDR/SW/CUST AIDs: 0001/0001/0001
EROM info:
S1_EROM R8A013 1226-2253 [20100119 17:24:00]
Software info:
1227-4612_R2BA020
Customization info:
1235-7379 R9A
Language info:
1227-4607_R2BA020
Identification Time - 00:00:02
Done!
Service Selection Started...
Getting Software List From Server For: X10 / 0001 / Red...
SELECTED: Flash / Debrand / Re-Brand [SonyEricsson] X10 / 0001 / Red / R1FA014 / 3 AU/SENSUOUS BLACK (1234-4828/R8A | NAM1)
Script Execution Started...
Checking Files...
Starting up...
Script initialization. Please wait...
Loading S1 Loader... OK
20091222 15:39:00 S1_LOADER R4A024 1226-2250
Memory Stick: 8GB
Opening TA...FAILED
Reading TA Please Wait...FAILED
Execution Time - 00:00:09
Done!
Can somebody help me please.
Thank You
Ask the Davinci team theyre probably your best bet seeing as though you paid for it your entitled to help with their product.
I am trying to figure out why my mobile phone (Galaxy Nexus) is not registering in foreign network(roaming). I think tracing RRC(Mobility Management) protocol messages would be a way to troubleshoot it and see at what point the registration procedure fails. Alternatively, some verbose diagnostic information could help to see whats going on in registration procedure.
For now I have decided to focus on RRC tracing.
What I have learned so far is that I can access Baseband Modem via serial device (in /dev) and interact with it via AT commands and possibly get traces or some diagnostics.
Q1: Am I on the right path?
I will appreciate any suggestions or link to relevant information.
I will update this thread as I progress.
HW:
Galaxy Nexus
Chipset: TI OMAP 4460
Baseband: Intel XG626
OS: CyanogenMod 11.0 (Android 4.4.4)
Running NCK Dongle Android MTK 2.5.9.5
Dongle is original, only 1 month old !
I click read codes I get IMEI info and other data but no simlock is displayed !
So I try direct unlock and I get this !
Can anyone help ? (or calculate correct code for me) ?
Thanks
maxmix
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[25]META Port Detected: MediaTek USB VCOM (Android) (COM25)
USB\VID_0E8D&PID_2007\5&387589A8&0&1
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6737m,S01
[AP]APP_VER: alps-mp-n1.mp1-V1_lenovo6737m.35.n1_P105
Making target channel configuration, wait...
Making tunnel configuration, wait...
Rebooting to meta, wait....
[META]BaseBand CPU : MT6735, E00
[META]SW_VER : ANDY.EMEA.V45
[META]HW_VER : LENOVO6737M_35_N1_HW
Phone imei[1] : 3565060***********
Start direct unlock[SIM1]
Simlock data not found(3).
Clean Boot flag ok.
All done.
maxmix
dear my friends ,urgent i need solution,have almost all programators like sigma kay ,hcu client dc phoenix ,octopus ..hcu client info
2018-12-25 02:38:06.103 Autodetect COM port and phone type start!
2018-12-25 02:38:07.212 Found COM port: COM83
2018-12-25 02:38:07.222 Found phone type: Huawei Android phone (Qualcomm CPU)
2018-12-25 02:38:07.234 Open COM port COM83 (DBAdapter Reserved Interface (COM83))...
2018-12-25 02:38:07.350 Start read phone info!
2018-12-25 02:38:07.478 Read phone secure info...
2018-12-25 02:38:07.739 Read phone basic info...
2018-12-25 02:38:07.849 Read phone info done!
Model: CAN-L11
IMEI: 8623****88888888
Firmware ver.: MSM8953C10B384_AMSS Nov 2 201810:28:29
Firmware model: CAN-L01
Dataver: CAN-L11C10B391_DATA_CAN-L11_hw_ru
SN: FPFD**********
PCB SN: DU4********
WiFi MAC: 182:76:8E:06:B1
BlueTooth MAC: 182:76:8D:F0:B0
Vendor: hw
Country: ru
RAM: 3GB
eMMC: 32GB
eMMC ID: 150100525831424D4206983DC6062400
HUN: 0000000000000000
IMEI 1 Sim Lock status:
NET: unlocked
NETSUB: unknown
SP: unknown
lets begin
customer brought can-l11 with android 6 ,in trying to flash it with nougat firmware ,it become dead ,only qualcom 9008 device recognized by pc ,so i flashed board firmware from dc support ,there is only Cannes-AL10_M001077_Board_Software_China_Nonspecific_Android_6.0_EMUI_4.1_firehorse
after that phone turns on but no imei,no serial ,no service nothing ,i have no backup ,
please i ask all members of this forum ,is any way to make phone fully in working condition ,please help me
i repaired imei .serial bluetooth wifi but signall of net is missing ,i think modem ,modemst1 and modemst2 partitions are missing ,please urgent i need your help,even 112 calling is impossible