I have installed the latest version of windows mobile device center on my PC with Vista. I have sucessfully sync'd without issue.
My issue is that everytime I disconnect my 8525 from the cradle I get the annoying message that Windows mobile device center sync host has stopped. Has anyone figured out how to fix that issue?............It's just annoying as heck.
Here is the error:
Description:
Stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: WmdHost.exe
Application Version: 6.1.6965.0
Application Timestamp: 465eef4e
Fault Module Name: unknown
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: 53502105
OS Version: 6.0.6000.2.0.0.256.6
Locale ID: 1033
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
anyone come up with something that will resolve this or am I doomed to wait for microsoft?
Wifi Does not work. It worked (with some trouble) with original WM5 rom, then I tested some rom download form this forum, and stopped to work.
Hp Asset viewer report:
Driver rev : N/A
Firmware ver: N/A
Hardware rev: 1.0
IP Address: N/A
Mac Address: N/A
Radio Present: Yes
so it look like if wifi firmware was cleared.
Any idea how to solve?
thanks
Please i need to flash my ~~SAMSUNG WM i-830 (IP-830W) FIRMWARE~~ showing:
RUL ERROR:
Timed out. Phone power failure.
================================================
Phone info
======================
PDA: S:i830WM5.1.2S.ZH31.14989
Phone: Not Available
Bluetooth: 2.08.03
Eboot: 01.00
H/W Version Not Available
========================================
I need the complete ROM update immediately
I am trying to figure out why my mobile phone (Galaxy Nexus) is not registering in foreign network(roaming). I think tracing RRC(Mobility Management) protocol messages would be a way to troubleshoot it and see at what point the registration procedure fails. Alternatively, some verbose diagnostic information could help to see whats going on in registration procedure.
For now I have decided to focus on RRC tracing.
What I have learned so far is that I can access Baseband Modem via serial device (in /dev) and interact with it via AT commands and possibly get traces or some diagnostics.
Q1: Am I on the right path?
I will appreciate any suggestions or link to relevant information.
I will update this thread as I progress.
HW:
Galaxy Nexus
Chipset: TI OMAP 4460
Baseband: Intel XG626
OS: CyanogenMod 11.0 (Android 4.4.4)
dear my friends ,urgent i need solution,have almost all programators like sigma kay ,hcu client dc phoenix ,octopus ..hcu client info
2018-12-25 02:38:06.103 Autodetect COM port and phone type start!
2018-12-25 02:38:07.212 Found COM port: COM83
2018-12-25 02:38:07.222 Found phone type: Huawei Android phone (Qualcomm CPU)
2018-12-25 02:38:07.234 Open COM port COM83 (DBAdapter Reserved Interface (COM83))...
2018-12-25 02:38:07.350 Start read phone info!
2018-12-25 02:38:07.478 Read phone secure info...
2018-12-25 02:38:07.739 Read phone basic info...
2018-12-25 02:38:07.849 Read phone info done!
Model: CAN-L11
IMEI: 8623****88888888
Firmware ver.: MSM8953C10B384_AMSS Nov 2 201810:28:29
Firmware model: CAN-L01
Dataver: CAN-L11C10B391_DATA_CAN-L11_hw_ru
SN: FPFD**********
PCB SN: DU4********
WiFi MAC: 182:76:8E:06:B1
BlueTooth MAC: 182:76:8D:F0:B0
Vendor: hw
Country: ru
RAM: 3GB
eMMC: 32GB
eMMC ID: 150100525831424D4206983DC6062400
HUN: 0000000000000000
IMEI 1 Sim Lock status:
NET: unlocked
NETSUB: unknown
SP: unknown
lets begin
customer brought can-l11 with android 6 ,in trying to flash it with nougat firmware ,it become dead ,only qualcom 9008 device recognized by pc ,so i flashed board firmware from dc support ,there is only Cannes-AL10_M001077_Board_Software_China_Nonspecific_Android_6.0_EMUI_4.1_firehorse
after that phone turns on but no imei,no serial ,no service nothing ,i have no backup ,
please i ask all members of this forum ,is any way to make phone fully in working condition ,please help me
i repaired imei .serial bluetooth wifi but signall of net is missing ,i think modem ,modemst1 and modemst2 partitions are missing ,please urgent i need your help,even 112 calling is impossible