[Q] ~~SAMSUNG WM i-830 (IP-830W) FIRMWARE~~ - Omnia II General

Please i need to flash my ~~SAMSUNG WM i-830 (IP-830W) FIRMWARE~~ showing:
RUL ERROR:
Timed out. Phone power failure.
================================================
Phone info
======================
PDA: S:i830WM5.1.2S.ZH31.14989
Phone: Not Available
Bluetooth: 2.08.03
Eboot: 01.00
H/W Version Not Available
========================================
I need the complete ROM update immediately

Related

ERROR 011: (while upgrading Qtek1010)

hi,
my first time on this site and i've been stuck to it for around 4 hrs.
i got a Qtek lately and thot to upgrade it which lead me to ur site when i registered i cudnt provide the correct information for my device there were no matching options. i goes like this
Model: PW10A1
Rom Version: 3.14.06 Eng
Radio Version: T313
Later, when i downloded SER 1.2 and tried to run it, in the command prompt that appears frst on it said
ERROR: GetDeviceData - Unspecified error
error getting devicedata
and further onwards
ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR
Cannot execute the remote communication program.
Please make sure that the USB/ Serial cable is propoerly connected
Everything was connected, activesync was running fine too, copying installing, i checked everything
i am fairly new to the handhelds, wud appriciate help
btw i am in UAE and the network is Etisalat

bluetooth license expiration problem

Hi,
I have problem with PDA ACER n50 and with bluetooth activation.
The problem appeared after ROM upgrading from v1.00.09 to v1.00.18
New ROM was downloaded from official ACER ftp.
Description of problem:
----------------------
When I turn ON bluetooth I got after some seconds message:
Sorry! Bluetooth can no longer be used because the license is expired.
BDA: 00:00:00:00:00:00
Key: E3E534E1...
PDA System info:
----------------
OS version: v4.21
ROM revision date: 20050818
ROM version: v1.00.18
Firmware version: v0.94
Bootloader version: v1.13
bluetooth info:
Bluetooth for Windows CE
BT-PPC Version 1.7.0 Build 1900
My unsuccessful efforts:
-----------------------
soft reset
hard reset
change of system datetime
older bluetooth versions application
- Widcomm 1.4.1.59
- Broadcom 1.6.0 0600
registry modifications
I tried solve this problem from suggestions which I detected on this site
etc...
Can anybody help me with specific recommendation ?
i'd contact acer
otherwise you can prob get it running if you set your clock a few years back :S

[TUT] OFFICIAL hw6900 NO GSM FIX for some phones

NO GSM FIX FOR SOME PHONES:
CLICK ON LINK
http://forum.xda-developers.com/showthread.php?p=2276981#post2276981
POST #56
I am making this thread so someone can please help us users of a HP hw6900 Series with the "NO GSM" startup message.
I have a HP hw6925, NO GSM, my product was under warranty and I recently sent it in to HP, , it would cost almost $300.00 for a new board, and I had the warranty at that time.
My next attempt to try and fix this issue will be what is posted at the link below.
If anyone out there has any "Sable" Backups, post in this thread, email me at [email protected]
I will post them on rapidshare, and alternate sites for everyone to download.
This is a huge problem. These HP hw6900 are nice phones, most of us still want to be able to use them as a phone, and a "PDA", some of us right now inlcuding myself can only use them as a PDA, or not at all, I will posting links later today, that should get any SABLE from the "Stuck on Bootloader Screen".
I am willing to donate to anyone who is serious about helping us fix this issue if it is possible, without replacing the mainboard of the hw6900, I will also be calling HP, and post the part number here and actual price for the hw6925 board.
"stuck On Bootloader"
If you are stuck on a HP Invent Screen, with G.39, etc.
And you have tried to hard reset and softreset with no luck, this is what you do.
XP Instructions:
1. Download this link http://www.mediafire.com/?3ygfbx0sjdy
2. In the taskbar area in the right hand corner, right click on activesync, bare with me, I'm using Vista and have to remember this, click connections..., you need to uncheck everything click ok or apply...
3. press ctrl-alt-delete, end process wscescomm.exe, (named something like that, end the process.
4. Extract the file you downloaded if needed.
5. Connect your device to the usb port on your computer.
6. Run Uni Exit Bootloader Application. Done
Vista Instructions:
1. Download these 2 links, and extract them if necessary.
http://www.mediafire.com/?3ygfbx0sjdy
http://www.mediafire.com/?9pmjkponfsg
2. Start Device Manager, (Start-Control Panel, Class View[Far Left Corner])
3. Connect HW6900 to USB port, you should now see a Mobile Devices (Next to + sign), Double Click
4. Right-Click on the Device, Click Update Driver Software, Choose let me pick from a list, Uncheck compatible hardware box.
5. Click have disk, Browse to location where USBAS is extracted, choose the wceusbsh.inf file, Double Click.
6. You should see Microsoft USB Sync, if not and it reverts back to the already installed file, and the box rechecks itself, uncheck it, choose microsoft, and choose the latest Microsoft USB Sync to install
GOOD LUCK
My Current hw6925 Status
"NO GSM" When Booting Up
I beleive it has No RadioOS.Nbf & No RadioFS.Nbf & No Imei.
Here is a screenshot of the Asset Viewer on the GSM Tab
Windows Mobile 6, Windows Mobile 6.1 Port
Official Windows Mobile 6/6.1 Port for hw6900 Series
Let's Get started people, Contribute to this thread.
If you have any Full Backup's of any hw6900 series thread post on rapidshare.com or mediafire.com
If you can not let me know by email, I will figure out a way to post them for you.
Again, any programmers willing to help any of us hw6900 Users, Please Help
Let me know the paypal account to deposit to via pm, I will post that information via this thread.
I need official 1.30 Cingular Roms from "Working" Devices.
If you can backup everything, including, RadioOS, RadioFS, CEOS, CEBL,
for those of you with fully working devices, please contribute to this thread.
Everyone please, I am trying not to wake up and see myself as the only one posting in this thread, I'm not the only one that wants this or the only one with problems with their hw6900 Series phone.
Please Contribute
HP HW6925 Repair Costs
Repair Cost $286.48 + Sales Tax.
Payment by Credit Card
Will take 3-5 Days,
I beleive they ship the box to you. (I think)
To much for my blood, May as well get a I-Phone
Hi,
I don't have any problem with my 6915 i have a french rom if you want and if you say me what i do to extract my rom i can upload everything to you
++
Radio Backup
dexxa05 said:
Hi,
I don't have any problem with my 6915 i have a french rom if you want and if you say me what i do to extract my rom i can upload everything to you
++
Click to expand...
Click to collapse
Do you have at least a 1 - 2 gb minisd card?
If so download mtty here
http://buzzdev.net/downloads.php?file=75
If you have Windows Xp, (CTRL-ALT-DEL) end process for wcescomm.exe (something like that).
put 6915 in bootloader mode, connect to usb port, press ctrl-alt-del, make sure activesync process is not running (WCESCOMM.EXE .......)
Start the mtty1.42.exe program
you should see:
USB>
now type
d2s 60000000 800000
If you have any problems please email me or im, [email protected]
Alot of people need this file, if possible, I am willing to even remote desktop connection, if you are unable to extract the radio rom.
Let me know what happens
i'd like to contribute what I can to this project I have an hw6955, when I went into bootloader to try to make a backup of my rom I get an error and it does not complete the process
jambongo said:
i'd like to contribute what I can to this project I have an hw6955, when I went into bootloader to try to make a backup of my rom I get an error and it does not complete the process
Click to expand...
Click to collapse
Do you get a "Cal Cheksum" on your Screen
try backing up your device using awizard tools, posted on here in the somewhere,
full backup including radio, ext rom, etc ........
then post it here
I will begin the Real WM6 Port
here's the message I get:
Code:
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SD:Detected one card
SD:ready for transfer OK
d.total_lba=1E4A00
d.block_size=200
d.RCA=E624
d.drv_type=40000000
d.busWidth=1
Total card size=3C940000
Read singal error D3
Read singal error!
SDCARDD2S+,cStoragePlatformType=FF
Some more info that may be useful:
Memory
System ROM Size : 128MB
System RAM Size : 64MB
ROM Is Flash : Yes
Flash Chip Type : G4
Flash Block Size : 256KB
PSM Driver Version : N/A
Version
Product Revision Level :
ROM Date : 08/28/06
ROM Revision : 1.52.00 ENC
Extended ROM Version : N/A
OS Version : Windows CE 5.1
Bootloader Version : G.39
XIP Version : 1.0.0.0
Camera
Module Present : Yes
Hardware Revision : 9650
Hardware Driver Version : 0.8.0
Software Driver Version : 4.1.0
Software Version : 1.0.21
Camera API Interface Version : 1.0.7
Camera Information : 1.3 MP 8X Zoom
Bluetooth
Radio Present : Yes
Firmware Version :
Hardware Revision :
Driver Version : 1.7.1.7800
Software Version : 1.7.1.7800
Wi-Fi
Radio Present : Yes
Firmware Version :
Hardware Revision :
Driver Version : 1.00.00
Software Version : 2.0.53
IP Address : Radio is Off
GSM
Radio Present : Yes
Radio Firmware Version : 1.02.00
Radio Protocol Stack Version : R5G.27.00.05
Radio Bootloader Version : 0.06
Radio File System Version : 0.07
Default Radio GDFS Version : 0.05
GPS
GPS Present : Yes
Status : GPS is Disabled
Manufacturer : Global Locate
Revision Level : N/A
Driver Version : 2.00
Firmware Version : 4.169.154.0
Software Version : 2.9.0.0
Awizard Tools
http://forum.xda-developers.com/attachment.php?attachmentid=26038&d=1138056282
Download the link above, then, run the program in windows 2000 compatibility mode, choose that by right clicking the file, click on properties, then, compatibility tab, check mark run in
compatibility mode, choose windows 2000, click apply ok, then run the program, choose the option for backup your device, backup everything choose [Y] or [YES] to everything, including radio, os, ext rom, .....
Follow the directions, beleive the device has to be connected to activesync, let me know what happens, any questions email, me,
Anyone else can do the same, lets fix these Sable devices, and start on a WM6 Port,
jambongo said:
here's the message I get:
Code:
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SD:Detected one card
SD:ready for transfer OK
d.total_lba=1E4A00
d.block_size=200
d.RCA=E624
d.drv_type=40000000
d.busWidth=1
Total card size=3C940000
Read singal error D3
Read singal error!
SDCARDD2S+,cStoragePlatformType=FF
Some more info that may be useful:
Memory
System ROM Size : 128MB
System RAM Size : 64MB
ROM Is Flash : Yes
Flash Chip Type : G4
Flash Block Size : 256KB
PSM Driver Version : N/A
Version
Product Revision Level :
ROM Date : 08/28/06
ROM Revision : 1.52.00 ENC
Extended ROM Version : N/A
OS Version : Windows CE 5.1
Bootloader Version : G.39
XIP Version : 1.0.0.0
Camera
Module Present : Yes
Hardware Revision : 9650
Hardware Driver Version : 0.8.0
Software Driver Version : 4.1.0
Software Version : 1.0.21
Camera API Interface Version : 1.0.7
Camera Information : 1.3 MP 8X Zoom
Bluetooth
Radio Present : Yes
Firmware Version :
Hardware Revision :
Driver Version : 1.7.1.7800
Software Version : 1.7.1.7800
MAC Address : 00-17-E5-A4-B3-97
Wi-Fi
Radio Present : Yes
Firmware Version :
Hardware Revision :
Driver Version : 1.00.00
Software Version : 2.0.53
IP Address : Radio is Off
MAC Address :
GSM
Radio Present : Yes
Radio Firmware Version : 1.02.00
Radio Protocol Stack Version : R5G.27.00.05
Radio Bootloader Version : 0.06
Radio File System Version : 0.07
Default Radio GDFS Version : 0.05
IMEI Number :
GPS
GPS Present : Yes
Status : GPS is Disabled
Manufacturer : Global Locate
Revision Level : N/A
Driver Version : 2.00
Firmware Version : 4.169.154.0
Software Version : 2.9.0.0
Click to expand...
Click to collapse
gave the tool a shot, but it gives me this error when it tries to backup the radio:
Code:
ERROR: ITTFFSGetInfo: outbuf==NULL
WARNING: using default 512 bytes for sectorsize
CopyTFFSToFile(0x50000, 0x280000, ROM\sable\sable-Radio.nba)
ERROR: ITReadDisk: outbuf==NULL
besides that no problems generating an OS and a boot.rgu image file
Okay, I'm also using a hw6915 with original german ROM, and I'm interested to get an to help getting WM6 on it.
Where is the problem? So many HTC devices have been got to run WM6. I thought the 69xx has also been built from HTC. Is there such a big difference, or is the "Sable" just a rarely used device so that no one knowing how to do is just doing it?
I am using the hw6915 with english uk original rom.I would like also to see the wm6 on my device..But the problem is that the developers will not fix a version for this device,because they are not interesting for this.We would be lucky if somebody of them had a device like ours and he had the grazy to make a version for this,for his own use,but they have Htc all of them and our mobile is old for their fancy now...Too bad..
any progress on this?
jambongo said:
any progress on this?
Click to expand...
Click to collapse
no progress at all, no one to help, or even a email reply back
my knowledge is limited in this area, but I am more than willing to help, I did provide a partial backup to you about a month or so ago
I'd still love to see a Windows Mobile 6 or 6.1 upgrade. I'm not sure how I could help. Does anyone else know why no one has cooked one up? I'm guessing no one who can owns one of these things.
I have a 6955 and will be doing a backup soon. I will post it as soon as I have it. Lets get things rolling.
This link should help with raw ROM dumps through the bootloader.
http://forum.xda-developers.com/showthread.php?t=325683

Xperia X10 DavinciTeam Flashing error

Hi,
I tried to flash my Xperia X10 with DavinciTeam but I get the following error;
(#) DaVinci Service Client v22.76 (User: 50250 / Credits: 10)
New Device Connected On USBF1
Device Identification Started...
The IMEI of the product is:
35941903237050
Model info:
X10i
Security info:
Color: Red
LDR/SW/CUST AIDs: 0001/0001/0001
EROM info:
S1_EROM R8A013 1226-2253 [20100119 17:24:00]
Software info:
1227-4612_R2BA020
Customization info:
1235-7379 R9A
Language info:
1227-4607_R2BA020
Identification Time - 00:00:02
Done!
Service Selection Started...
Getting Software List From Server For: X10 / 0001 / Red...
SELECTED: Flash / Debrand / Re-Brand [SonyEricsson] X10 / 0001 / Red / R1FA014 / 3 AU/SENSUOUS BLACK (1234-4828/R8A | NAM1)
Script Execution Started...
Checking Files...
Starting up...
Script initialization. Please wait...
Loading S1 Loader... OK
20091222 15:39:00 S1_LOADER R4A024 1226-2250
Memory Stick: 8GB
Opening TA...FAILED
Reading TA Please Wait...FAILED
Execution Time - 00:00:09
Done!
Can somebody help me please.
Thank You
Ask the Davinci team theyre probably your best bet seeing as though you paid for it your entitled to help with their product.

help stuck at cab sender

╔════════════════════════════════════════════════════════════════════╗
║ WP7 Update Cab Sender xboxmod-Yuki 2011 ║
╠════════════════════════════════════════════════════════════════════╝
■
╠══════» S ·(S)end Cabs to device
■
╠══════» B ·Send Cabs to device with (B)ackup
■
╠══════» R ·(R)estore device backup
■
╠══════» L ·Read last Update (L)ogs from device
■
╚══> Your choice: S
╔══════» Creating list of cabs
■
■
╠══════» Updating device
■
UpdateWP version 4.8.2345.0
Applying updates to device
Id: \\?\usb#vid_045e&pid_04ec&mi_00#6&35be5422&0&0000#{ca3d7387-f67
b-11da-bbec-8000600fe800}
SN: c4f5e1dc - 1c7f66f0 - 40c8cb90 - 039b91b6
Name: HTC HD2
KITLName: QSD8XXX01083841
Manufacturer: HTC
ModelId: 1
Model: HD2
MobileOperator: 000-00
Version: 07.00.07392.03-00.00.00000.00-00.00.00000.00
Checking your phone's status: Completed in 0.02 seconds
Checking system requirements: Completed in 0.02 seconds
Downloading updates: Completed in 0.33 seconds
Error:
Update device c4f5e1dc - 1c7f66f0 - 40c8cb90 - 039b91b6 Complete with error code
: 801811A5, error message: Can't access the update service. Make sure your compu
ter is connected to the Internet and try again.
■
╚══════» Done
Press any key to continue . . .
alexfos said:
╔════════════════════════════════════════════════════════════════════╗
║ WP7 Update Cab Sender xboxmod-Yuki 2011 ║
╠════════════════════════════════════════════════════════════════════╝
■
╠══════» S ·(S)end Cabs to device
■
╠══════» B ·Send Cabs to device with (B)ackup
■
╠══════» R ·(R)estore device backup
■
╠══════» L ·Read last Update (L)ogs from device
■
╚══> Your choice: S
╔══════» Creating list of cabs
■
■
╠══════» Updating device
■
UpdateWP version 4.8.2345.0
Applying updates to device
Id: \\?\usb#vid_045e&pid_04ec&mi_00#6&35be5422&0&0000#{ca3d7387-f67
b-11da-bbec-8000600fe800}
SN: c4f5e1dc - 1c7f66f0 - 40c8cb90 - 039b91b6
Name: HTC HD2
KITLName: QSD8XXX01083841
Manufacturer: HTC
ModelId: 1
Model: HD2
MobileOperator: 000-00
Version: 07.00.07392.03-00.00.00000.00-00.00.00000.00
Checking your phone's status: Completed in 0.02 seconds
Checking system requirements: Completed in 0.02 seconds
Downloading updates: Completed in 0.33 seconds
Error:
Update device c4f5e1dc - 1c7f66f0 - 40c8cb90 - 039b91b6 Complete with error code
: 801811A5, error message: Can't access the update service. Make sure your compu
ter is connected to the Internet and try again.
■
╚══════» Done
Press any key to continue . . .
Click to expand...
Click to collapse
fixed that on to 7712 booted up red windows loding with dots now stuck with black screen with batt icon and time and the zune is at 9 0f 9...is this part of the 7712 update process??
Try taking out your sdcard and doing a hard reset
chrisrj28 said:
Try taking out your sdcard and doing a hard reset
Click to expand...
Click to collapse
can i do that i wont brick or would i have to start over the 7712 update process..
becuase zune is a 9 of 9 completing updates still and the phone booted with black screen with batt icon an time.. i it safe or do u know for sure thats not a process in updating sorry ofr all the questions just want to be sure..thanks
alexfos said:
can i do that i wont brick or would i have to start over the 7712 update process..
becuase zune is a 9 of 9 completing updates still and the phone booted with black screen with batt icon an time.. i it safe or do u know for sure thats not a process in updating sorry ofr all the questions just want to be sure..thanks
Click to expand...
Click to collapse
sorry wnet ahead and did it btw works now booting mango rtm hopes it works out thanks alot

Categories

Resources