I have a yu yureka running on cm11 kitkat stock rom on which i tired to flash twrp. I flashed the right files but now the phone is stuck in bootloop. How do i fix this? I tried searching a lot but the only solution i found was to flash the stock firmware. All the links to download files are broken. Can anyone help me? Im a newbie at this stuff.
Groverkss said:
I have a yu yureka running on cm11 kitkat stock rom on which i tired to flash twrp. I flashed the right files but now the phone is stuck in bootloop. How do i fix this? I tried searching a lot but the only solution i found was to flash the stock firmware. All the links to download files are broken. Can anyone help me? Im a newbie at this stuff.
Click to expand...
Click to collapse
Remove battery
Hold volume up
Insert battery
Connect usb cable
Enter fastboot command
Unlock bootloader
Flash twrp
Format data and cache
Flash custom ROM
Your method will not work
method will not work. I fixed it after a lot of trying.
Solution: Flash an old version of TWRP(like 2.8). Kitkat doesn't support the newer versions of TWRP. This is why flashing new TWRP doesn't work. Now install the stock ROM of KitKat cm11 and install Stock recovery. UPDATE cm 11 to cm12 using official updates using stock recovery. Now flash new TWRP and it will work. I don't use this site a lot but if you ever see someone askung this then this method will work.
Related
Hi, I have a very senitive problem with my G2 and I can't solve it.
So I am not new to rooting and flashing but this never happened to me...
I installed TWRP on my international unlocked LG G2 D802 and flashed stock LG 4.4.2
All good but..now I can't acces any recovery. When I want to enter recovery mode. It says boot verification failed and then it just stays on black screen.
So I tried installing CWM and same thing, back to TWRP and same thing...
So I tought, what if I install CM 11 with cyanogenmod installer, cause they install all the things for you right?
Is this dangerous or something?
Please help me if you can.
Did u even read the other threads on 4.4.2
There is like 500+ answers to this on this forum..
You can't install Kitkat and keep custom recovery without some workarounds. Now you would have to downgrade to Jellybean and update the correct way to keep it.
Hi all,
I have a N9005 which I rooted a while ago. When I tried to flash CM11 I didn't seem to have a custom recovery so I flashed CWM with Odin and then flashed CM11 with no problems and it works pretty well, the odd crash but nothing too upsetting.
However the OTA updates download and when the phone tries to update CWM says there is no such zip file so it aborts and reboots.
Would TWRP solve this issue for me and if it would, how would I go about removing CWM and installing TWRP?
Thanks in advance.
Some CM roms have OTA problems so you need to flash normally
shero73 said:
Hi all,
I have a N9005 which I rooted a while ago. When I tried to flash CM11 I didn't seem to have a custom recovery so I flashed CWM with Odin and then flashed CM11 with no problems and it works pretty well, the odd crash but nothing too upsetting.
However the OTA updates download and when the phone tries to update CWM says there is no such zip file so it aborts and reboots.
Would TWRP solve this issue for me and if it would, how would I go about removing CWM and installing TWRP?
Thanks in advance.
Click to expand...
Click to collapse
Regarding installing TWRP recovery, just flash it via Odin.
Cheers guys, noob question but would there not be a conflict flashing Twrp when I already have cwm installed and where would I find the correct twrp for my model? Thanks
no conflict and you will find a thread fot twrp but you don't need it, I flash CM with Philz
ok, I've tried to flash philz from this source theandroidsoul.com/samsung-galaxy-note-3-lte-sm-n9005-philz-touch-advanced-cwm-recovery-android-4-4-compatible/ and it doesn't seem to have worked. The phone went into a recovery loop which I can get out of by a battery pull but basically now I have no recovery any ideas? thanks again
http://cdn.goo.im/philz_touch/CWM_A...430512&token=89733f7796e1e15a04775227f401019e
thanks a lot, that worked but the ota still not working i'll flash it with odin. last question, do I need to flahs the gapps again or just the cm zip file? thanks
Normally no..
Hello. I wanted to update my G2(D802) from CM12 to 13 and now my phone is stuck at LG logo...
i flashed CM13, then gaps and then bootstack CAF and now i cannot access twrp using power and vol- buttons, i can only enter download mode. Maybe because i didnt flash them with the right order? What should i do now? i dont care if i flash cm13 or 12 or getting back to stock, i just need the fastest solution. THANKS.
Why dont you find the related threads in General and development sections . Read Read Read !
Flashtool and flashing stock ROM find threads about going back to stock rom.
you did the wrong order. its bootstacks reboot into recovery again from recovery then rom and gapps.
the way i did it was to clean wipe all and used a stock lollipop rom that was flashable.. cant remember if flashed hybrid bootstacks before..
when the rom was unzipped i couldnt open them they were in a different format i had 2 one was tar and the other .img.. so if am correct those are the kdz or tot roms in a flashable zip.. that was the easy way..
I rooted my SM-G7102 using KingoRoot App for Windows.
Later I installed Twrp recovery using Odin 3.10.7 :http://forum.xda-developers.com/galaxy-grand-2/orig-development/twrp-unofficial-twrp-recovery-t2798433
Booted into recovery, did a factory reset and tried installing Resurrection Remix: http://forum.xda-developers.com/galaxy-grand-2/orig-development/rom-resurrection-remix-m-v5-6-7-t3360391
It installed successfully I latter install 6.0 micro gapps as advised on the ROM's Page and rebooted however it just showed me Sammy BootLogo and then a blue screen and then restarted again
I later did a complete format including /data and also tried installing CM13 unofficial: http://forum.xda-developers.com/galaxy-grand-2/orig-development/cm-13-0-ms013g-cyanogenmod-13-grand-2-t3299635
however same results.
Another alter I tried was installing both ROMs mentioned above without GAPPS however it didn't work too!
Would love to recieve some help, Thanks.
[EDIT]
p.s: I was using Samsung's Stock Andorid v4.3 firmware before flashing.
Also here is my recovery log: https://gist.githubusercontent.com/ArchKudo/ab4738a2482121fde280643fc86b5ab6/raw/0cae8a800552fc331d841bd1a6798c9a41e524ec/recovery.log
[EDIT 2]
It worked! Installed 4.4.2 and re-flashed
Flash 4.4.2 firmware
Then flash custom roms
Igor2906 said:
Flash 4.4.2 firmware
Then flash custom roms
Click to expand...
Click to collapse
Thanks for the reply!
Should I use the same TWRP recovery as mentioned before?
Also is 4.3 known to cause bootloops or is there some guesswork involved?
noobno.NaN said:
Thanks for the reply!
Should I use the same TWRP recovery as mentioned before?
Also is 4.3 known to cause bootloops or is there some guesswork involved?
Click to expand...
Click to collapse
Yeah use TWRP
me2 facing same problrm but i have first install from official 4.4.2 firmeware plz help
I want full stock software flashable via recovery philz because accodently deleted some files
And i need boot.img for kitkat and lollipop
I tried flashing stock deodexed 4.4 rooted rom it flashed properly but it stucks on boot logo and restarts continously and i tried flashing a gamer ultimate rom for t237p its wifi isnt working but booting properly and also tried flashing lollipop 5.1.1 stock debloated rom and it doenst go after showing galaxy tab 4
I really need your help
I am a needy person please help me :laugh: :laugh:
look for your firmware model on this website
https://www.sammobile.com/firmwares/
then download it and install it using odin