I rooted my SM-G7102 using KingoRoot App for Windows.
Later I installed Twrp recovery using Odin 3.10.7 :http://forum.xda-developers.com/galaxy-grand-2/orig-development/twrp-unofficial-twrp-recovery-t2798433
Booted into recovery, did a factory reset and tried installing Resurrection Remix: http://forum.xda-developers.com/galaxy-grand-2/orig-development/rom-resurrection-remix-m-v5-6-7-t3360391
It installed successfully I latter install 6.0 micro gapps as advised on the ROM's Page and rebooted however it just showed me Sammy BootLogo and then a blue screen and then restarted again
I later did a complete format including /data and also tried installing CM13 unofficial: http://forum.xda-developers.com/galaxy-grand-2/orig-development/cm-13-0-ms013g-cyanogenmod-13-grand-2-t3299635
however same results.
Another alter I tried was installing both ROMs mentioned above without GAPPS however it didn't work too!
Would love to recieve some help, Thanks.
[EDIT]
p.s: I was using Samsung's Stock Andorid v4.3 firmware before flashing.
Also here is my recovery log: https://gist.githubusercontent.com/ArchKudo/ab4738a2482121fde280643fc86b5ab6/raw/0cae8a800552fc331d841bd1a6798c9a41e524ec/recovery.log
[EDIT 2]
It worked! Installed 4.4.2 and re-flashed
Flash 4.4.2 firmware
Then flash custom roms
Igor2906 said:
Flash 4.4.2 firmware
Then flash custom roms
Click to expand...
Click to collapse
Thanks for the reply!
Should I use the same TWRP recovery as mentioned before?
Also is 4.3 known to cause bootloops or is there some guesswork involved?
noobno.NaN said:
Thanks for the reply!
Should I use the same TWRP recovery as mentioned before?
Also is 4.3 known to cause bootloops or is there some guesswork involved?
Click to expand...
Click to collapse
Yeah use TWRP
me2 facing same problrm but i have first install from official 4.4.2 firmeware plz help
Related
Hi all,
I have a N9005 which I rooted a while ago. When I tried to flash CM11 I didn't seem to have a custom recovery so I flashed CWM with Odin and then flashed CM11 with no problems and it works pretty well, the odd crash but nothing too upsetting.
However the OTA updates download and when the phone tries to update CWM says there is no such zip file so it aborts and reboots.
Would TWRP solve this issue for me and if it would, how would I go about removing CWM and installing TWRP?
Thanks in advance.
Some CM roms have OTA problems so you need to flash normally
shero73 said:
Hi all,
I have a N9005 which I rooted a while ago. When I tried to flash CM11 I didn't seem to have a custom recovery so I flashed CWM with Odin and then flashed CM11 with no problems and it works pretty well, the odd crash but nothing too upsetting.
However the OTA updates download and when the phone tries to update CWM says there is no such zip file so it aborts and reboots.
Would TWRP solve this issue for me and if it would, how would I go about removing CWM and installing TWRP?
Thanks in advance.
Click to expand...
Click to collapse
Regarding installing TWRP recovery, just flash it via Odin.
Cheers guys, noob question but would there not be a conflict flashing Twrp when I already have cwm installed and where would I find the correct twrp for my model? Thanks
no conflict and you will find a thread fot twrp but you don't need it, I flash CM with Philz
ok, I've tried to flash philz from this source theandroidsoul.com/samsung-galaxy-note-3-lte-sm-n9005-philz-touch-advanced-cwm-recovery-android-4-4-compatible/ and it doesn't seem to have worked. The phone went into a recovery loop which I can get out of by a battery pull but basically now I have no recovery any ideas? thanks again
http://cdn.goo.im/philz_touch/CWM_A...430512&token=89733f7796e1e15a04775227f401019e
thanks a lot, that worked but the ota still not working i'll flash it with odin. last question, do I need to flahs the gapps again or just the cm zip file? thanks
Normally no..
At the moment have stock 5.0.1 rom for SM-N910F.
have rooted and installed twrp through odin but every time I try and install a custom rom, it installs but it bootloop. And I mean every rom. Tried installing twrp through flashify and as a zip file and both of those won't boot the phone up at all. It will just go straight to download mode.
I am fresh out of ideas and any help would be appreciated.
I have been flashing for years so I know the steps to successfully flash custom roms but I have never faced this before.
you sure you got the right version for your phone, seems like a compatibility issue with your recovery/bootloader.
SquirtingCherry said:
you sure you got the right version for your phone, seems like a compatibility issue with your recovery/bootloader.
Click to expand...
Click to collapse
Yeah that's what I thought but it was for SM-N910F according to TWRP website and all the roms have been for that same version.
Hi,
Below is was my setup:
Latest TWRP Recovery
Alucard Kernel
S4 i9505
CM12.1 nightly
XPOSED v75
Viper4Android
Two days ago I decided to flash the sabermod kernel. At first I couldn't install it using the .zip (script error of some sort)
I then flashed the boot.img file as boot.
The phone was working fine for two days (rebooted twice at least).
On every Friday I download the latest nightly and flash it using the dirty flash method.
This is when I ran into trouble...
The TWRP is stuck on the Team Win screen.
I found a way to boot normally and decided to flash the alucard kernel back using Kernel Adiutor (boot.img).
The phone booted but now I have endless process stop errors (com.google.process.gapps) and I have lost root.
I need help...
Regards,
Jat
jdhot2 said:
Hi,
Below is was my setup:
Latest TWRP Recovery
Alucard Kernel
S4 i9505
CM12.1 nightly
XPOSED v75
Viper4Android
Two days ago I decided to flash the sabermod kernel. At first I couldn't install it using the .zip (script error of some sort)
I then flashed the boot.img file as boot.
The phone was working fine for two days (rebooted twice at least).
On every Friday I download the latest nightly and flash it using the dirty flash method.
This is when I ran into trouble...
The TWRP is stuck on the Team Win screen.
I found a way to boot normally and decided to flash the alucard kernel back using Kernel Adiutor (boot.img).
The phone booted but now I have endless process stop errors (com.google.process.gapps) and I have lost root.
I need help...
Regards,
Jat
Click to expand...
Click to collapse
Just reflash TWRP. Uncheck auto-reboot in Odin before flashing.
F2FS Support
I have all partitions formatted in F2FS apart from system which is EXT4. Can I flash TWRP via Odin if it is not . tar?
jdhot2 said:
I have all partitions formatted in F2FS apart from system which is EXT4. Can I flash TWRP via Odin if it is not . tar?
Click to expand...
Click to collapse
Flashing a firmware will fix the issue, both for recovery and rom
Which Firmware?
Which Firmware to flash? Obviously I can only flash via odin. Also what will happen to the F2FS partitions?
jdhot2 said:
Which Firmware to flash? Obviously I can only flash via odin. Also what will happen to the F2FS partitions?
Click to expand...
Click to collapse
Flashing will return you to ext4
Because f2fs needs a special recovery files etc... and it will be replaced.
Test it out you wont lose nothing
Flash latest samsung touchwiz?
Just to confirm you are asking to flash the latest Sammy rom which I believe is 5.0.1. however Cm12.1 is 5.1.1. If you are confident in me trying this I will download the stock rom and flash it via odin and will let you know how I go. Thanks for your help so far.
jdhot2 said:
Just to confirm you are asking to flash the latest Sammy rom which I believe is 5.0.1. however Cm12.1 is 5.1.1. If you are confident in me trying this I will download the stock rom and flash it via odin and will let you know how I go. Thanks for your help so far.
Click to expand...
Click to collapse
Yes flashing sammy, no prob always here to help
Flashing Now
I am now flashing latest Sammy rom with latest Odin.
You're a lifesaver!
Thanks for your help much appreciated.
My phone is up and running again.
Next time if I have any issues with my s4 I'll just flash the latest Sammy rom.
I was playing around trying to install CM 12.1 for 910C and I did sucessfully using TWRP 2.8.1.2 and every thing went fine till i wanted to go back to stock rom (N910CXXU1COI4_N910COJV1COH1_N910CXXU1COI4) but after flashing with odin it starts with "installing system updates" but after like 25% it stops and writes "Erasing" then fall into a boot loop stuck on Samsung logo (and recovery shows KNOX: 1)
When I tried to install the custom recovery and rom the phone boots normally
Tried back and forth and tried CWM recovery but every time i go back to stock i get stuck
Any help
Thanks
Mee too. I user cm 13 and flash stock odin and smart swich.
It bootloot at logo. Sad
aalim said:
I was playing around trying to install CM 12.1 for 910C and I did sucessfully using TWRP 2.8.1.2 and every thing went fine till i wanted to go back to stock rom (N910CXXU1COI4_N910COJV1COH1_N910CXXU1COI4) but after flashing with odin it starts with "installing system updates" but after like 25% it stops and writes "Erasing" then fall into a boot loop stuck on Samsung logo (and recovery shows KNOX: 1)
When I tried to install the custom recovery and rom the phone boots normally
Tried back and forth and tried CWM recovery but every time i go back to stock i get stuck
Any help
Thanks
Click to expand...
Click to collapse
Did you do a SWM recovery before flashing CM12? Hopefully...
If so restore that. If not, lesson learned.
What were you running before you tried CM12?
Looks like it was older than COI4 and it knows it.
Knox is 1 because it knows you flashed something other than an official stock rom.
I use stock. Flash twrp and wide and flash cm 13. After odin stock and bootlook
Please help me. I speek englis not good. Sorry
1. before that I was using Stock (XSG-N910CXXU1COI4-20150925140936) 5.1.1 flashed through odin and Knox was 0
2. I then installed TWRP 2.8.2.1 then installed (cm-13.0-20151215-UNOFFICIAL-treltexx) then (cm-12.1-20151202-UNOFFICIAL-treltexx)
3. then I flashed the COI4 again and it did the problem
I did not install any radios bootloaders or kernels
the weird thing is that now all roms i download other that CM gives me zip verification error and cannot install
so is there any solution ?
Thanks
dicksteele said:
Did you do a SWM recovery before flashing CM12? Hopefully...
If so restore that. If not, lesson learned.
What were you running before you tried CM12?
Looks like it was older than COI4 and it knows it.
Knox is 1 because it knows you flashed something other than an official stock rom.
Click to expand...
Click to collapse
After flash CM 13 i have problem i cant flash stock official rom
Knox is 1 wtf how to fix this problem?
Fikret488 said:
After flash CM 13 i have problem i cant flash stock official rom
Knox is 1 wtf how to fix this problem?
Click to expand...
Click to collapse
Not sure how I can state it any clearer than this
Knox is 1 because it knows you flashed something other than an official stock rom.
You will never be able to fix/clear it. You have tripped the Knox security.
Perhaps you should do more reading before you attempt things on your phone.
---------- Post added at 08:03 PM ---------- Previous post was at 08:01 PM ----------
aalim said:
1. before that I was using Stock (XSG-N910CXXU1COI4-20150925140936) 5.1.1 flashed through odin and Knox was 0
2. I then installed TWRP 2.8.2.1 then installed (cm-13.0-20151215-UNOFFICIAL-treltexx) then (cm-12.1-20151202-UNOFFICIAL-treltexx)
3. then I flashed the COI4 again and it did the problem
I did not install any radios bootloaders or kernels
the weird thing is that now all roms i download other that CM gives me zip verification error and cannot install
so is there any solution ?
Thanks
Click to expand...
Click to collapse
Flash a stock ROM. The COI4 is good, it's working. What you are missing is after you get stuck on the logo, try pulling the battery. Boot into the stock recovery and do a factory reset. That should fix it.
aalim said:
1. before that I was using Stock (XSG-N910CXXU1COI4-20150925140936) 5.1.1 flashed through odin and Knox was 0
2. I then installed TWRP 2.8.2.1 then installed (cm-13.0-20151215-UNOFFICIAL-treltexx) then (cm-12.1-20151202-UNOFFICIAL-treltexx)
3. then I flashed the COI4 again and it did the problem
I did not install any radios bootloaders or kernels
the weird thing is that now all roms i download other that CM gives me zip verification error and cannot install
so is there any solution ?
Thanks
Click to expand...
Click to collapse
Duplicate post...
SOLVED here is the Link
Thanks to @dawnfx
check this solution for problem restoring EFS and "not registered" problem and wrong IMEI
http://forum.xda-developers.com/galaxy-s2/general/guide-recover-imei-9-steps-t1264021
Hi everyone I've been having trouble booting my G975F since I flashed latest firmware in Odin. I've done a factory reset in recovery and wipe cache after i flashed it but I get
#reboot recovery cause BL: recovery mode set by key#
Supported API: 3
MANUAL MODE v1.0.00#
Any help would be greatly appreciated!
Did you already fixed this i have the same problem after flashing back to stock
mpjjansen said:
Did you already fixed this i have the same problem after flashing back to stock
Click to expand...
Click to collapse
I haven't fixed it yet, I can't flash any lineage based rom or it does a loop in twrp as well..
FreeRunner2017 said:
I haven't fixed it yet, I can't flash any lineage based rom or it does a loop in twrp as well..
Click to expand...
Click to collapse
well i can help you with that i think
download this twrp https://androidfilehost.com/?fid=4349826312261758026 and flash it through ODIN (AP)
then flash a custom rom for example https://forum.xda-developers.com/ga...om-hadesrom-q-stock-v1-0-exynos-s10e-t4058441
and it should work
i need to find out why i can't go to stock
mpjjansen said:
well i can help you with that i think
download this twrp https://androidfilehost.com/?fid=4349826312261758026 and flash it through ODIN (AP)
then flash a custom rom for example https://forum.xda-developers.com/ga...om-hadesrom-q-stock-v1-0-exynos-s10e-t4058441
and it should work
i need to find out why i can't go to stock
Click to expand...
Click to collapse
Yes it does, any stock based will work but no lineage based rom will work.
mpjjansen said:
well i can help you with that i think
download this twrp https://androidfilehost.com/?fid=4349826312261758026 and flash it through ODIN (AP)
then flash a custom rom for example https://forum.xda-developers.com/ga...om-hadesrom-q-stock-v1-0-exynos-s10e-t4058441
and it should work
i need to find out why i can't go to stock
Click to expand...
Click to collapse
Stock based roms work fine its only lineage based roms that won't boot, just keeps rebooting to recovery. . Tried everything.