I recently got the Xtrons TE706PL in my car, however I didn't build in the GPS unit yet.
This is because I already have a Pioneer GPS Antenna installed (JVC Headunit), however this is using the Pioneer AVIC connector. Does anyone know if it's possible to convert the Pioneer AVIC to the Fakra connector? This safes me a lot of trouble
Impossible?
Wuxz said:
I recently got the Xtrons TE706PL in my car, however I didn't build in the GPS unit yet.
This is because I already have a Pioneer GPS Antenna installed (JVC Headunit), however this is using the Pioneer AVIC connector. Does anyone know if it's possible to convert the Pioneer AVIC to the Fakra connector? This safes me a lot of trouble
Click to expand...
Click to collapse
https://www.amazon.com/Connector-Female-Pigtail-Antenna-Extension/dp/B075WGGWSF
That's was one of adapters i found in 2 seconds google search, with little time for sure you can find a solution that suit you; they cost little money so you can buy and test by yourself.
Have a nice day!
iRcKenny said:
https://www.amazon.com/Connector-Female-Pigtail-Antenna-Extension/dp/B075WGGWSF
That's was one of adapters i found in 2 seconds google search, with little time for sure you can find a solution that suit you; they cost little money so you can buy and test by yourself.
Have a nice day!
Click to expand...
Click to collapse
Thanks for your help!
But ofcourse I've been Googling, I'm not an idiot However, this is the wrong way around, I need AVIC to FAKRA, which I'm unable to find.
Wuxz said:
Thanks for your help!
But ofcourse I've been Googling, I'm not an idiot However, this is the wrong way around, I need AVIC to FAKRA, which I'm unable to find.
Click to expand...
Click to collapse
If you not find something usefull you can always buy a small piece of 50 ohms coaxial cable, 1 fakra and 1 avic connector and crimp together, maybe the cheap solution
Related
Hello,
My new 2GB RAM with the Intel SoFIA CPU will be delivered at the end of this week. I am going to install it in my 2010 Subaru WRX STI which already has a GPS Antenna installed (which has worked very well with stock and other aftermarket units).
Unfortunately the connector of the OEM GPS Antenna is quite different from the connection on my soon to arrive Joying unit. I was therefore wondering if it is possible to connect my OEM GPS Antenna using an adapter cable similar to this:
car-solutions.com/nfs/product/832612/image/800/Adapter-for-OEM-GPS-Antenna-Connection-in-Toyota-Lexus-Subaru-Mazda.jpg (sorry not able to post outside links yet)
Has anybody tried this or does anybody know if this could even technically work?
Thanks in advance.
Kind Regards,
Robert
You get a antenna with the unit right? {EDIT} Sorry, i see you want your own working, but i can garanty you the gps antenna that comes with it is fine!
i used this adapter for my Jeep to Joying:
https://smile.amazon.com/gp/product/B00OOD2TGW/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
works great
slickynl said:
You get a antenna with the unit right? {EDIT} Sorry, i see you want your own working, but i can garanty you the gps antenna that comes with it is fine!
Click to expand...
Click to collapse
Yeah, you get an antenna with the unit and I have already hooked it up for testing and as you say it works. Using the original one is a lot more neat and tidy
CadillacMike said:
i used this adapter for my Jeep to Joying:
link to adapter
works great
Click to expand...
Click to collapse
Thanks, I have ordered an GT5-1PP M grey to SMA male adapter cable from eBay. Hope it fits as I am not a 100% sure if this is the right connector, closest thing I could find though. :good:
I'm in the market for an android head unit. The OEM one in my car is now not working and Toyota wants an arm and a leg for a new one. Instead of just buying an OEM one off EBay. I wanted to buy an Android one. Any suggestions? Also I had a few questions.
I had GPS in my car, so do I need to still use the external GPS antenna?
I have the same question for the microphone. Less wired the better.
Thanks!
Jackasaur said:
(1) I had GPS in my car, so do I need to still use the external GPS antenna?
(2) I have the same question for the microphone. Less wired the better.
Thanks!
Click to expand...
Click to collapse
1. I used the one that came with the replacement HU, but you could try an fakra adapter. If you dont know what that is, best use GPS antenna that comes with replacement; concealed under dash should be sufficient .
2. Yes, if you are skilled or have access to a skilled electronics tech. No adapter exists. Starts with reverse engineering from toyota electrical wiring diagram.
For my 2010 Blade (corolla hatch with 3.5l v6) I made an interface for the oem MIC and used the GPS that came with the new MTCD JY.
Anyone have an idea what port #8 in this picture is? There was an adapter that has a male usb end and I'm not sure if I'm supposed to plug it in anywhere?
https://imgur.com/a/z1QXr
Hi
I have recently fitted an Android head unit in my VW Passat. It is an Erisin, not sure about the model. This was an easy installation as it plugged straight into the existing cradle. After a few settings adjustments this works great. As the car has an OEM reversing camera I had a to purchase an adaptor that would make it work with the new unit. I was hoping that somebody might be able to give me some directions on how to fit this thing as I really don't have a clue. Where do the 3 wires have to be connected?
I can't post a link but if you Google search VW076 the first result will give you a picture of the part.
Thanks in advance.
Hi. I have a question which nobody can answer me about DAB radio in Mazda CX-5 2016 (1gen. facelift). I have original DAB antenna in the car and I'm trying to figure it out is it possible to connect it to Teyes CC3 HU or do I need to buy DAB+ adapter (they're selling it). If I need this adapter is it possible not to have it on my windshield and use the original one antenna?
Hope to find someone who wants not just to sell everything without tech support
Thanks
Dr.Z7 said:
Hi. I have a question which nobody can answer me about DAB radio in Mazda CX-5 2016 (1gen. facelift). I have original DAB antenna in the car and I'm trying to figure it out is it possible to connect it to Teyes CC3 HU or do I need to buy DAB+ adapter (they're selling it). If I need this adapter is it possible not to have it on my windshield and use the original one antenna?
Hope to find someone who wants not just to sell everything without tech support
Thanks
Click to expand...
Click to collapse
Yea, I wanna know that too. But I think its possible to make it work. Did you manage it?
Hi members,
Long time no see !
I have bought an android unit 8.8" for an Audi A5 (for a friend) and the harness is not compatible with the car. The seller-on ebay- is not answering anymore, so I need some help to solve the problem. They described it as a Junsun unit, with 4gb/64g and android 10, but i couldn't start it. I have some pictures with the unit and the harness, maybe I can make the connection myself.
What would help me would be the pinout for both 32 pin white connector and for audi 20 pin AC connector.
Thanks for your help!
Any help? Any advice? I cannot solve this one. Thanks in advance!
dicabkl said:
Any help? Any advice? I cannot solve this one. Thanks in advance!
Click to expand...
Click to collapse
There are a lot of fake Junsun head units on ebay. I think best is to return the device and buy from a trustable seller.
Thanks for your answer! Actually, I cannot return the unit because I saw very late that is not the same harness. Where can I find the pinout for my 32 pin white connector? I think it is standard one
dicabkl said:
Thanks for your answer! Actually, I cannot return the unit because I saw very late that is not the same harness. Where can I find the pinout for my 32 pin white connector? I think it is standard one
Click to expand...
Click to collapse
Sounds like a (not so) funny project.
Another approach may be to re-engineer the pins of the head unit by using the pinout of a compatible car and the wiring harness shipped with the head unit.