Witam wszystkich.
Kupiłem radio od Funrover na aliexpress. Po podłączeniu radia włączyło się normalnie i po 5 sekundach gaśnie ekran. Jak wciskam przycisk RST to podświetlenie przycisków mrugnie oraz widać mrugnięcie obrazu desktopu. Po ponownym zresetowaniu sytuacja się powtarza z czarnym ekranem.
Radio to:
Procesor: Interl SoFIA 3GR Quad Core
System operacyjny: Android 8.0
RAM: 2 GB + 32G (Wzmacniacz mocy IC: TDA7851 )
Rafal998 said:
Witam wszystkich.
Kupiłem radio od Funrover na aliexpress. Po podłączeniu radia włączyło się normalnie i po 5 sekundach gaśnie ekran. Jak wciskam przycisk RST to podświetlenie przycisków mrugnie oraz widać mrugnięcie obrazu desktopu. Po ponownym zresetowaniu sytuacja się powtarza z czarnym ekranem.
Radio to:
Procesor: Interl SoFIA 3GR Quad Core
System operacyjny: Android 8.0
RAM: 2 GB + 32G (Wzmacniacz mocy IC: TDA7851 )
Click to expand...
Click to collapse
Problem rozwiązany. Okazało się że zanikło napięcie na czerwonym przewodzie w kostce (zasilanie po kluczyku)
Related
today i broke my mda, i upgrade mda Radio stack 3.07 to 6.25.02 so now my mda cant catch the signal. I am living in russia, if someone can help me, post the answer please thanks
Ong vao Boot Loader
vao phan chinh GSM
Chinh GSM o tang so <1800
Vsua
Ban oi, minh dung gsm bandswitch ma cung khong duoc minh nghi day khong fai la vi tan so dau ma vi cai gi do khac y. M cai RS lam cai tro gi vay?
I have managed to install TomTom Navigator 5 on my K-Jam and the application works fine. However I can't get it to talk to my Bluetooth GPS. Have looked here and seen reference to a GPS option in settings but this doesn't appear in my device. Any help please...within the application only a limited number of ports are offered and none match those in the bluetooth options,
cheers,
alastair
Yes there is a problem with WM 5.0 => only TTN5 sees the port.
A solution is to create a virtual port for the GPS with GPSGate
cheers - i have downloaded the application (GPSGate) but can't work out how to configure it. for Com port inputs it simply offers me the same list as in the TTN application and i can't create any virtual port output. a step by step guide would be great!!
Pair your GPS with the PDA, and when prompted make the Virtual COM (serial) port.
After simply use TT5 with "Other NMEA GPS Device CABLED" and set the right COM port to use as COM5 or BT Com Port in the next selection.
Ciao
Or
http://www.modaco.com/How_To_Setup_Tomtom_5_On_K_jam-t229788.html
I have the same problem. My Qtek 2020, 1.60.00WWE with tomtom5.
The GPS devaice is connected to com5 (checked with the gps tester sw).
But in the tomtom windows this port is not listed
I have tied also the GpsGate sw, but again in the GpsGate settings windows in the input port the com5 is not listed.
can you help? thanks
Sorry I cannot because I have had not this problem, but I see you have a very old and troublefull version of the ROM. The first step to do, I think, is to upgrade to a new official ROM or better a unofficial Second Edition ROM.
Mi dispiace ma non posso perchè non ho avuto lo stesso problema, ma vedo che usi una ROM molto vecchia e piena di problemi. Il primo pass, penso, sia l'aggiornare ad una ROM ufficiale più recente o meglio ad una non ufficiale con la Second Edition.
Ciao,
Problem z Hard SPL Pomocy !!! UPDATE ERROR 262
Witam
Mam problem z wgraniem nowego romu...Po uruchomieniu Hard SPL i wgrywaniu romu zatrzymalo sie na 14% nastepnie kominikat o odlaczeniu PDA i wyciegnieciu bateri do ponownego podlaczenia i ... no wlasnie uruchamia sie po wlaczniu PDA HardSpl i zaden rom nie chcie sie dalej instalwoac co moze byc przyczyna POMOCY !!!
Near update alloy on 14% ? No different rom does want farther to establish oneself Reset and alloy
Konrad81U said:
Problem z Hard SPL Pomocy !!! UPDATE ERROR 262
Witam
Mam problem z wgraniem nowego romu...Po uruchomieniu Hard SPL i wgrywaniu romu zatrzymalo sie na 14% nastepnie kominikat o odlaczeniu PDA i wyciegnieciu bateri do ponownego podlaczenia i ... no wlasnie uruchamia sie po wlaczniu PDA HardSpl i zaden rom nie chcie sie dalej instalwoac co moze byc przyczyna POMOCY !!!
Near update alloy on 14% ? No different rom does want farther to establish oneself Reset and alloy
Click to expand...
Click to collapse
Well...
O ile dobrze pamietam, to rom update chce tylko odlaczyc kabel, nic wiecej, bateria to chyba lekka przesada...
W takim razie jakie czynnosci wykonac by wgrac nowy rom ? badz powrocic do starego zeby muc uruchomic normalnie polariska
Konrad81U said:
W takim razie jakie czynnosci wykonac by wgrac nowy rom ? badz powrocic do starego zeby muc uruchomic normalnie polariska
Click to expand...
Click to collapse
czy mozna wejsc do tri-color screen?
Hello,
I've just updated my polaris radio to Murata PPAS 1.58.21.23 two day ago, after that, i have strange problem, sometimes sound is totaly mute and only soft reset helps. Could it be because of Murata PPAS rom upgrade? No problems before with original radio rom.
Thanx. VicC
switched back to original Radio ROM and problem is almost gone... it happens not so often now... ;/ i hate this prob ;[
Problem so zvukom
Zdravim, tiez mam ten isty problem so zvukom, flashoval som Murata Radio a pri telefonovani nepocujem absolutne nic, vsimol som si ze sa to stava, ked som spustil a vypol TomTom-a, ako keby to bolo zavisle na prepnuti, teda spracovavani aj GSM signalu spolu s GPS.
Popdarilo sa Ti to nejakym sposobom vyriesit, teda okrem vratenia Origin. radia? Pripadne nasiel si aspon tak dobru alternativu ako Murata radio?
Zosenko
DC - Unlocker 2 Client 1.00.1403
Detecting phone :
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Found Applications port COM6
what exactly is the problem ?
===================================================================
DC - Unlocker 2 Client 1.00.1403
Detecting phone :
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Found Applications port COM21
===================================================================
===================================================================
DC - Unlocker 2 Client 1.00.1403
Detecting phone :
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Found Applications port COM21
===================================================================
Kardeşim türkmüsün
What Build Number Is the phone?
factor19300 said:
Kardeşim türkmüsün
Click to expand...
Click to collapse
Aynen başkan Türk'üm
JonasStomp said:
What Build Number Is the phone?
Click to expand...
Click to collapse
FIG-LX1 8.0.0.161(c432)
@fatih4261
Kardeşim bu bootloader kilidi nasıl kaldırılıyor DC unlocker kullanmayı bilmiyorum Türkçe kaynak yok bana Instagramdan ulaşabilirsin ozi.yz kullanıcı adım
fatih4261 said:
DC - Unlocker 2 Client 1.00.1403
Detecting phone :
selection :
manufacturer - Huawei phones
model - Auto detect (recommended)
Found Applications port COM6
Click to expand...
Click to collapse
Sorun nedir tam olarak
Beyler yardım edin biraz kaldıralım şu kilidi
oherey said:
Sorun nedir tam olarak
Click to expand...
Click to collapse
Kardeşim telefonun imeisini bilgilerini okumuyor o yüzden bootloader unlock kodunu alamıyorum