Related
hi all
my gps doesn't work.... tomtom6 works, but it says "pas de peripherique gps" (no GPS hardware)....
i tried all toms that can be found in this forum, but withour result
at this time, I have the official HTC WWE rom :
ROM 1.11.707.1
Date 29/01/08
Radio 03.15.90
Protocole 4.1.13.59
setting of external gps : COM4, 4800baud , none (hardware com)
setting of tomtom : other NMEA gps, com4, 4800 baud
please, hellp
thanks
Try setting tomtom to internal GPS not to other NMEA.
I have also tried internal GPS... but it still doesn't work
whan I set other NMEA and com4, the right side led, strat flashing orange. so i this the softxare is good, and so my probleme is hardware
Ihave aslo try IGO8 GPS... and the result is the same.
well... my GPS works, but only with my original Orange ROM... i try it with Guigou's rom and poldo's rom, and it doesn't work.
the orange led is flashing like it should, but software (Igo or tomtom) are not able to found gps hardware...
I thinks a driver is missing in those ROM. or the driver is wrong, regarding to my Orange mobile
any idea?
thanks a lot
I download Advanced Configuration Tools v2.0.2.0, and GPS is not listed (with Guigou's rom).
I must try with Poldo's, but I don't have it a this time.
Teckynou said:
well... my GPS works, but only with my original Orange ROM... i try it with Guigou's rom and poldo's rom, and it doesn't work.
the orange led is flashing like it should, but software (Igo or tomtom) are not able to found gps hardware...
I thinks a driver is missing in those ROM. or the driver is wrong, regarding to my Orange mobile
any idea?
thanks a lot
Click to expand...
Click to collapse
no idea same problem !!! but IGO 8 does work with ORANGE rom ? tomtom does but what about IGO ???
many thanks my friend
Bruno.
IGO works fine with my Orange rom
hello i have the same problem. what are you doing to gps work.....?
Try these values in "Settings" - "GPS Setings":
Software port: COM4
Hardware port: COM2
Transmission speed: 115200
After this, select "Internal GPS" in your navigation software.
Gps active original Orange ROM
version de Rom : 1.13.73.1
http://rapidshare.com/files/142359641/ROM_FRENCH_ORANGE.rar
daniel.mota said:
Try these values in "Settings" - "GPS Setings":
Software port: COM4
Hardware port: COM2
Transmission speed: 115200
After this, select "Internal GPS" in your navigation software.
Click to expand...
Click to collapse
doesn't work....
the only way is using the original ornage rom at the time.
I extract oem and sys folder of my original orange rom, and in OEM/OperatorPKG, their is "HtcGpsUpdate_with_MUI.cab".... what is it? maybe this cab is a "driver" for the internal gps of an Orange Pharos (maybe their is a diferent hardware)
Teckynou said:
doesn't work....
the only way is using the original ornage rom at the time.
I extract oem and sys folder of my original orange rom, and in OEM/OperatorPKG, their is "HtcGpsUpdate_with_MUI.cab".... what is it? maybe this cab is a "driver" for the internal gps of an Orange Pharos (maybe their is a diferent hardware)
Click to expand...
Click to collapse
It works for me.
Maybe because i still have the original rom.
Good Job my friend...
:http://rapidshare.com/files/144442103/HtcGpsUpdate_with_MUI.cab
daniel.mota said:
It works for me.
Maybe because i still have the original rom.
Click to expand...
Click to collapse
yes, GPS woks fine with original orange rom
ilkery said:
Good Job my friend...
:http://rapidshare.com/files/144442103/HtcGpsUpdate_with_MUI.cab
Click to expand...
Click to collapse
I don't try it? and you?
do this cab makes GPS working with a different rom than orange
I try the cab with poldo's rom and IGO8.... still doesn't work with my pharos from orange....
H i i've got the same problem . I have changed the Rom and my GPS isnot working , neither with Miomap neither TOMTOM.
Can Anyone help with this one ??
Tomtom /pharos
Bonjour j'ai un HTC touch p3470 de chez Orange
Version ROM 1.15.73.2. FRE
Date de la Rom 01/29/08
Version Radio 03.18.90
version de protocole 4.1.13.60
Impossible de faire fonctionne Tomtom navigateur
pas d'appareil GPS
j'ai essayer les differentes version de config sur le forum
toujours pareil pas de GPS
Merci pour une solution
Hi
Problem is solver for me and maybe for some of You too. I'm using Miomap and TomTom so far I have managed to use it on Miomap.
The devil is in details.
In windows: Go to Setting -> Connections -> External GPS
Hardware : com4
Software : com2
Freq : 4800
Last Tab must be ticked.
Next -> goto Your navigation program - settings -> GPS Setting and make the same configuration ( using NMEA). GPS in automatic configuration won't be found but if You set it on manually it WILL work. Leave -> restart and Use it
Good Luck
which rom are you using?
for me, this setting doesn't work with a non orange rom on my aroange pharos
kaleyn
Junior Member Join Date: Apr 2008
--------------------------------------------------------------------------------
still nobody has solved my problem...
plz any senior member .. u must have a solution....
give me that...
Even with radio upgrades it stops automatically saying that
Error 270: Update Error
The image file is corrupted please check your update utility....
Quote:
Originally Posted by kaleyn
use USPL to get rid of the CID....count goes up to 100% screen shows black, blue green, then pops to white. I need to do a soft reset to get it running again.
Then i use ROM Update Utility to update my p3300....and it still keeps hanging on 3%....damn. i get mad...!! Have read almost all here online...no virusscanner, no firewall....I use Vista.
i even tried without memory card and phone card....and nothing seems to work.......
Rom version: 3.7.707.1 WWE
Rom date: 6/21/07
Radio Version: 02.69.90
Protocol version: 4.1.13.30
ExtROM Version: 3.6.707.101
please help
Are u using Win Vista or Xp?
I Know,
But i think phone is still CID locked?? or ROM file is to big. Artemis is flashable with VISTA
--
amerr said:
Hi Kaleyn,
I was having the same problem on xp with sp3, i was getting error 270 and it was driving me mental. remove the memory card and then use uspl to remove CID protection, let it go to 100%, you said your screen then goes white, on my Artemis, I was once shown the linux duck but for the most part the screen goes black. at this point it loses sync with the pc, the green icon goes white on the pc showing its no longer synched, ignore this and do not reset your phone. Instead close down uspl and open the rom update utility. your phone is still in sync with the pc but by doing a reset it messes it up. trust me it works, i have flashed my phone loadsa times now without any problems.
So when USPL is at 100% and your screen goes white, DO NOT TOUCH YOUR PHONE, just close USPL and open RUU and update and then like magic it should have uploaded your new rom and you'll be a happy bunny
Click to expand...
Click to collapse
Dude I did the same but I am getting same error I'm ****ed !!
I also have the same problem.
Already took the SIM card and the microSD.
I did u USPL, HARDSPL, etc etc. ..
Already tried with Vista and XP
Someone has discovered the origin of this problem?
Error 270...
--------------------------------------------------------------------
Eu também tenho o mesmo problema.
Já tirei o cartão SIM, bem como o microSD.
Já fiz u USPL, HARDSPL, etc etc..
Já experimentei com o Vista e com o XP
Alguém já descobriu a origem deste problema?
Solução para o Error 270
Finally I got it.
For those who have not yet managed to do the following:
1 USPL;
2 when finishing the USPL, let the screen stay in black / white and wait a while to restart the PDA. Is not seen, but the PDA is connected;
3 without touching the PDA or disconnect the USB cable, run your favorite ROM.
RC
--------------------------------------------
Finalmente já consegui.
Para quem ainda não conseguiu tem de fazer o seguinte:
1º USPL;
2º quando acabar o USPL, deixar que o ecra fique em preto/branco e aguardar um tempo que o PDA reinicie. Não se vê, mas o PDA está ligado;
3º sem tocar no PDA nem desligar o cabo USB, correr a vossa ROM preferida.
RC
RCabrita said:
Finally I got it.
For those who have not yet managed to do the following:
1 USPL;
2 when finishing the USPL, let the screen stay in black / white and wait a while to restart the PDA. Is not seen, but the PDA is connected;
3 without touching the PDA or disconnect the USB cable, run your favorite ROM.
RC
--------------------------------------------
Finalmente já consegui.
Para quem ainda não conseguiu tem de fazer o seguinte:
1º USPL;
2º quando acabar o USPL, deixar que o ecra fique em preto/branco e aguardar um tempo que o PDA reinicie. Não se vê, mas o PDA está ligado;
3º sem tocar no PDA nem desligar o cabo USB, correr a vossa ROM preferida.
RC
Click to expand...
Click to collapse
That is written in the USPL manual...
Before you try anything just read the manuals first... They are there to help, not just to say what a wonderfull program it is.
Cheers
Zecanilis said:
That is written in the USPL manual...
Before you try anything just read the manuals first... They are there to help, not just to say what a wonderfull program it is.
Cheers
Click to expand...
Click to collapse
Yes, you are right!
I had done almost all of USPL, but did not expect the time. Maybe not this time to restart the PDA.
Thanks and I apologize.
RC
Jeez can this be in a clearer thread, Amerr nailed my problem but it took me 4 hrs to find this solution. Thanks a
hey guyes, tried everything .... stilll not doin
rik.vanoijen said:
Jeez can this be in a clearer thread, Amerr nailed my problem but it took me 4 hrs to find this solution. Thanks a
Click to expand...
Click to collapse
will u plz quote the solution u found
kaleyn said:
will u plz quote the solution u found
Click to expand...
Click to collapse
what the hell still no sound solution..
i never expected..
this is crab ..
Today my internet connection is a bit fast, so i only took 2 sec to find your answer.
http://forum.xda-developers.com/showpost.php?p=1312109&postcount=118
Thanks for all
thanks Guy, you are the best, i follow your steps and i get it easy. thank you. sore about my english.
Hi everybody,
I'm an italian user. I Have a problem with my tp2. I have always had an enciclopedy for every my ppc...But with this Tp2 it doesn't work.
When I launch it, after a few seconds appears an error message that say: "spiacente, si è verificato un problema con pvpload.exe" ( It happens a problem with pvbload.exe") and the software not work and stopped.
I upgraded with 6.5 but it doesn't work even with 6.1...
I have installed microsoft 3.5framework...
Thx.
compliments for the great work!
Hello guys!
I own a qTek S100 that was once a TMN cell phone, but now is unlocked and is using a Vodafone Portugal sim card. As you know, the phone is equipped with the Windows Mobile 2003, and its version is:
4.21.1088 (Build 15045.2.6.0)
The ROM of the device is:
1.12.00 WWE
What do you, experts, advise, to improve this cell phone, and make it even better than it already is?
Apps, ROMs, and everything you know better than I do, are welcome!!!
Thank you in advance!
MGuedes said:
Hello guys!
I own a qTek S100 that was once a TMN cell phone, but now is unlocked and is using a Vodafone Portugal sim card. As you know, the phone is equipped with the Windows Mobile 2003, and its version is:
4.21.1088 (Build 15045.2.6.0)
The ROM of the device is:
1.12.00 WWE
What do you, experts, advise, to improve this cell phone, and make it even better than it already is?
Apps, ROMs, and everything you know better than I do, are welcome!!!
Thank you in advance!
Click to expand...
Click to collapse
You can try Cotulla's Wm6.1 ROMS
and you can also trash that racist vodafone scumbags and pick a real SP
Thanks for your answer, Riki! I never thought about that connection! Quite interesting!
Anyway, I'm a bit afraid of trying Cotulla's ROM because perhaps it wouldn't work, and then I'd lose my cell phone.. Do you think it's safe to try it? Isn't there too much of a risk?
MGuedes said:
Thanks for your answer, Riki! I never thought about that connection! Quite interesting!
Anyway, I'm a bit afraid of trying Cotulla's ROM because perhaps it wouldn't work, and then I'd lose my cell phone.. Do you think it's safe to try it? Isn't there too much of a risk?
Click to expand...
Click to collapse
I guess, you just live to follow and understand instructions given by Cotulla to succeed to flash ROMS Wm6.1
Well, thanks.
Lately, my qTek is facing a problem. I don't have any call sounds. I can't hear people talking to me, and neither can I hear the call tones when I'm calling someone. All the other sounds are audible.
MGuedes said:
Well, thanks.
Lately, my qTek is facing a problem. I don't have any call sounds. I can't hear people talking to me, and neither can I hear the call tones when I'm calling someone. All the other sounds are audible.
Click to expand...
Click to collapse
what radio version do you use on your device today ??
Sorry? I don't understand what you're saying..
MGuedes said:
Sorry? I don't understand what you're saying..
Click to expand...
Click to collapse
I mean, what version of radio carriers ( such as type of 1.12.00 and others) and try to upgrade the radio! maybe it happened ( call vote, can not hear people talking, did not hear the tone of the call ) because the radio version that is not appropriate...
I have the 1.12.00 version. Is there any higher than that?
MGuedes said:
I have the 1.12.00 version. Is there any higher than that?
Click to expand...
Click to collapse
You can get all the radio version for htc magician at http://forum.xda-developers.com/showthread.php?t=705702
MGuedes said:
Well, thanks.
Lately, my qTek is facing a problem. I don't have any call sounds. I can't hear people talking to me, and neither can I hear the call tones when I'm calling someone. All the other sounds are audible.
Click to expand...
Click to collapse
I have that problem too on my 2nd hand Magician, I've bought it that way because I'm using this a test device.
------------
Eu comprei o meu S100 já com esse problema, se for o mesmo problema do meu então deve ser a coluna interna do telefone avariada. Este telemovel tem duas colunas de som, uma normal por exemplo que é utilizada pelo Windows media player, e a outra que é utilizada pelo telefone. Tenta o seguinte, quando fizeres ou receberes uma chamada, coloca-a em alta-voz (pressiona longamente o botao verde para atenderes em alta-voz) e confirma se assim já consegues ouvir. Se conseguires, é a coluna interna do telefone que avariou. Há um tipo no Algarve que arranja isso, mas cobra ainda um pouco carote, e tens de enviar pelo correio. Eu não enviei porque o meu magician já tem montes de probs e eu uso isto para outras coisas que não telefonar Um abraço
------------
About the radio version, I recommend you continue to use 1.12.00, I have it instead of 1.13 because Cotulla ROM's only work on 1.12 and since I'm always changing between 6.1 and wm2003, I always leave it with 1.12
iRiKi said:
I have that problem too on my 2nd hand Magician, I've bought it that way because I'm using this a test device.
------------
Eu comprei o meu S100 já com esse problema, se for o mesmo problema do meu então deve ser a coluna interna do telefone avariada. Este telemovel tem duas colunas de som, uma normal por exemplo que é utilizada pelo Windows media player, e a outra que é utilizada pelo telefone. Tenta o seguinte, quando fizeres ou receberes uma chamada, coloca-a em alta-voz (pressiona longamente o botao verde para atenderes em alta-voz) e confirma se assim já consegues ouvir. Se conseguires, é a coluna interna do telefone que avariou. Há um tipo no Algarve que arranja isso, mas cobra ainda um pouco carote, e tens de enviar pelo correio. Eu não enviei porque o meu magician já tem montes de probs e eu uso isto para outras coisas que não telefonar Um abraço
------------
About the radio version, I recommend you continue to use 1.12.00, I have it instead of 1.13 because Cotulla ROM's only work on 1.12 and since I'm always changing between 6.1 and wm2003, I always leave it with 1.12
Click to expand...
Click to collapse
Thanks.. Since I hear all the other noises, it's probably the call-speaker that is malfunctioning.. Anyway, since the last time I came here, that speaker came back to life and now is dead again, so, I just carry a pair of headphones on my pocket, that I use whenever I want to call or answer people.. It's a bit annoying because the wires keep tangling up, but has its advantages..
If you flash Cotulla's ROMs, you can then return to WM2003?
And besides those ROMs, what more do you advise me to do?
I have at home one of those Samsung Vodafone 360 M1, which was offered to me by a magazine to which I collaborate. But that SO (LiMo) is buggy as hell, so, it's now in my desk, on my room, with no use.. And with 90% of my contacts, because I couldn't find a clever way to pass them to the qTek again..
MGuedes said:
Thanks.. Since I hear all the other noises, it's probably the call-speaker that is malfunctioning.. Anyway, since the last time I came here, that speaker came back to life and now is dead again, so, I just carry a pair of headphones on my pocket, that I use whenever I want to call or answer people.. It's a bit annoying because the wires keep tangling up, but has its advantages..
If you flash Cotulla's ROMs, you can then return to WM2003?
And besides those ROMs, what more do you advise me to do?
I have at home one of those Samsung Vodafone 360 M1, which was offered to me by a magazine to which I collaborate. But that SO (LiMo) is buggy as hell, so, it's now in my desk, on my room, with no use.. And with 90% of my contacts, because I couldn't find a clever way to pass them to the qTek again..
Click to expand...
Click to collapse
Speaker back to life!
Another doubt. My cell phone now periodically shuts down my calls, at 8 minutes.. What can I do? How can I solve this?
My qTek is now doing Hard Resets every day, with no apparent reason. What do you think it's causing this?
Sorry about the late reply, but Android is now the king! anyways that also happens to me, it's because of a red switch located on the right side of the phone, when you remove the battery.my solution was to put a piece of paper so it doesn't hard reset.good luck!
Sent from my Boston using xda app-developers app
iRiKi said:
Sorry about the late reply, but Android is now the king! anyways that also happens to me, it's because of a red switch located on the right side of the phone, when you remove the battery.my solution was to put a piece of paper so it doesn't hard reset.good luck!
Sent from my Boston using xda app-developers app
Click to expand...
Click to collapse
Oh.. Thanks anyway!
MGuedes said:
Oh.. Thanks anyway!
Click to expand...
Click to collapse
There's a guy in Algarve that knows how to fix this old phones.. if you want I can give you his contact, just pm me.
MGuedes said:
Well, thanks.
Lately, my qTek is facing a problem. I don't have any call sounds. I can't hear people talking to me, and neither can I hear the call tones when I'm calling someone. All the other sounds are audible.
Click to expand...
Click to collapse
I had this same problem years ago. The device has two speakers. One at the back for the multimedia purposes and the other one at the top front for hearing calls. The front speaker got damaged and i had to get it replaced at a local shop. Then it worked like a charm!
And that ROM works.
Hi, I have a HP Ipaq rx5900 Poquet pc with tom tom 6 in europe
comes from the factory with Windows Mobile 5.1, and wanted to install Windows 6.0 or 6.5, if possible.
But...
first .... as it is?
second, how to install on sd card "tom tom 6 or 7"again?
Any link for windows 6.0 or 6.5 for my ipaq rx 5900?
Please, I need to "rescue" my ipaq rx 5900, so it is not too old. thanks.
--------------------
En Español:
Hola, tengo un poquet pc HP Ipaq rx5900 con tom tom 6 de europa,
viene de fabrica con windows mobile 5.1, y quisiera instalarle windows 6.0 o 6.5, si es posible.
pero primero....como se hace?
segundo: como instalar en sd card "tom tom 6 o 7 " de nuevo?
Algun enlace para windows 6.0 or 6.5 para mi ipaq rx 5900?
Por favor, Necesito " rescatar " mi ipaq rx 5900, para que no quede demasiado antiguo .gracias.
If u have off rom wm5 + off updater it can be wm6.1/5.
If no = no update
Hello ASakovoy,
I know how you feel... At least WM 5 will be supported for a little while longer. I've been trying to upgrade a WM 2003 iPAQ (Next to be dropped from support). It is hard finding upgrades for these machines.
Since HP never issued an upgrade for the rx5900 series you will have to try your luck Googling for ROMs. Someone may have cooked one for your device. I've found that lots of persistent searching is better to get results than just asking and hoping someone who knows finds your request. Sorry, the searching really is up to you. I hope you have better luck than I have had so far.
HP does have Tom Tom 6 Western Europe for download still:
http://h20000.www2.hp.com/bizsuppor...cc=us&swItem=ip-48733-1&jumpid=reg_R1002_USEN
I assume it is in ENGlish. You may want to download the file and save it on your PC.
Another option to look at is getting Linux to boot on your device. Most likely you would boot into Linux from an SD card - rather than flashing your ROM. Then you could choose between WM and Linux as needed.
That too appears hard to accomplish. Your device has a similar processor to my rx3115. They both use the Samsung sc3244x cpu with an ARMv4T instruction set. More work has been done (both for WM and Linux) for Intel and Texas Instrument cpu's...
But if you look around enough you might find some options.
Good Luck.
Can't really help with what your asking but would like to make one suggestion for improvement. I'm able to use an 8GB SDHC card with my RX5915 using the hack in this thread.
http://forum.xda-developers.com/showthread.php?t=344338
Only problem I have with the hack is having to do a soft reset to get the card recognized again after the unit shuts off.
RumoredNow said:
Hello ASakovoy,
I know how you feel... At least WM 5 will be supported for a little while longer. I've been trying to upgrade a WM 2003 iPAQ (Next to be dropped from support). It is hard finding upgrades for these machines.
Since HP never issued an upgrade for the rx5900 series you will have to try your luck Googling for ROMs. Someone may have cooked one for your device. I've found that lots of persistent searching is better to get results than just asking and hoping someone who knows finds your request. Sorry, the searching really is up to you. I hope you have better luck than I have had so far.
HP does have Tom Tom 6 Western Europe for download still:
http://h20000.www2.hp.com/bizsuppor...cc=us&swItem=ip-48733-1&jumpid=reg_R1002_USEN
I assume it is in ENGlish. You may want to download the file and save it on your PC.
Another option to look at is getting Linux to boot on your device. Most likely you would boot into Linux from an SD card - rather than flashing your ROM. Then you could choose between WM and Linux as needed.
That too appears hard to accomplish. Your device has a similar processor to my rx3115. They both use the Samsung sc3244x cpu with an ARMv4T instruction set. More work has been done (both for WM and Linux) for Intel and Texas Instrument cpu's...
But if you look around enough you might find some options.
Good Luck.
Click to expand...
Click to collapse
Hello RumoredNow:
Thank you for your contribution. look at the link Tom Tom 6.
to me is more important now to get a WM6 or more to serve my "ipaq".
Or all windows mobile (wm6 to wm6) are the same, removing the language, and little else?
supports my "ipaq" a wm6 or wm6.5?
how do I install on my sd card?
-----------------------
En Español:
Hola RumoredNow :
Gracias por tu aportacion. mirare el enlace del Tom Tom 6.
para mi es mas importante ahora conseguir un WM6 o superior que sirva a mi " ipaq".
O todos los windows mobile (wm6 contra wm6) son iguales, quitando el idioma, y poco mas?
soporta mi "ipaq" un wm6 o wm6.5?
como lo instalo en mi sd card?
The answers are never easy, I'm finding out...
You may want to look at my thread of what I've been going through to try and upgrade an old iPAQ:
http://forum.xda-developers.com/showthread.php?t=981868
Are you asking how to install a ROM flash from an SD card?
To upgrade your OS off the card?
First you need someone who has a compatible ROM. That's what you have to search for.
RumoredNow said:
The answers are never easy, I'm finding out...
You may want to look at my thread of what I've been going through to try and upgrade an old iPAQ:
http://forum.xda-developers.com/showthread.php?t=981868
Are you asking how to install a ROM flash from an SD card?
To upgrade your OS off the card?
First you need someone who has a compatible ROM. That's what you have to search for.
Click to expand...
Click to collapse
Hi RumoredNow , I'm reading all your lengthy post, with the difficulty that my English is very bad and usually need a translator (google translator), so the translation is not perfect, and therefore the understanding is more complicated.
And it is clear that the important thing is to find a wm6 rom or above compatible (or a cooked wm5.1 ...).
The other day I saw a video on my ipaq and I see that has features that I do not see in my Poquet ... so I think it's a cooked wm5.1 version.
http://www.youtube.com/watch?v=py1d3imfb9u&feature=player_embedded
If it is true that is cooked, it means that deveria be a there to download ... where? that is the question .....
SORRY......I saw a problem in the direct link of the video.
to see him, I'll put the link before and so you just have to click on the video where it says:
http://wn.com/iPAQ_iPhone_is_possible!
Video: (click it) HP iPAQ rx5900 Travel Companion GPS ** for sale **
------------------------------------
En Español:
Hola RumoredNow , me estoy leyendo todo tu extenso post, con la dificultad que mi ingles es muy malo y necesito un traductor habitualmente(google traductor) , de esta manera la traduccion no es perfecta, y por tanto la comprension es mas complicada.
Y esta claro que lo verdaderamente importante es encontrar una rom de wm6 o superior compatible (o un wm5.1 cocinado...).
el otro dia vi un video sobre mi ipaq y veo que tiene funciones que yo no veo en mi poquet...por tanto creo que es una version cocinada de wm5.1.
http://www.youtube.com/watch?v=py1d3imfb9u&feature=player_embedded
Si es cierto que esta cocinada, quiere decir que deveria haber una por ahi para descargarla...donde? esa es la cuestion.....
LOL - I have seen that video. That is my iPAQ model series (rx3000) they show on there.
That is not an Operating System. It is just a dressed up display to LOOK like iPhone.
It is only eye-candy. If you take your dog and put a child's costume on him so he is dressed up like a cat - he will still BE a dog and ACT LIKE a dog. Same thing. You just dress the iPAQ in the costume of iPhone, but it still would BE WM 5.
ASakovoy said:
Hi RumoredNow , I'm reading all your lengthy post, with the difficulty that my English is very bad ....
Click to expand...
Click to collapse
I Own an rx 5910. I have done quite a bit of research and so far I can tell you that: there is no possibility NOW of upgrading it to wm6. . Actually it seems that most probably it will never happen: to have wm 6 on rx 5900 series. If you are interested, I could post two or three links of threads in this forum and elsewhere that make this very clear.
In the youtube post you make above, there are many videos involved and am not sure which one you are referring to. If it is the one on voice commands on rx 5910, you simply have to get voice to go. I have it installed in my iPAQ and from time to time I do use it when am driving.
Egnubo said:
I Own an rx 5910. I have done quite a bit of research and so far I can tell you that: there is no possibility NOW of upgrading it to wm6. . Actually it seems that most probably it will never happen: to have wm 6 on rx 5900 series.
Click to expand...
Click to collapse
It could happen if someone could get rx5000 Series ROM update files.
As they are available to repair and service centers. Example [here]
Spiaatie said:
It could happen if someone could get rx5000 Series ROM update files.
As they are available to repair and service centers. Example [here]
Click to expand...
Click to collapse
Hi, I saw the link, and promise the latest version of Windows Mobile to put ... but it is an ambiguous answer, because if it does not support anything more than wm5.1, they charge you 27 euros for walking the ipaq (for nothing )....
RumoredNow said:
LOL - I have seen that video. That is my iPAQ model series (rx3000) they show on there.
That is not an Operating System. It is just a dressed up display to LOOK like iPhone.
It is only eye-candy. If you take your dog and put a child's costume on him so he is dressed up like a cat - he will still BE a dog and ACT LIKE a dog. Same thing. You just dress the iPAQ in the costume of iPhone, but it still would BE WM 5.
Click to expand...
Click to collapse
Yes, maybe you're right, but if it seems it is impossible to upper windows, our iPAQ's, we would have to ask whether we settle for a custom rom of wm5 ... ..
even so, do not give up ..
ASakovoy said:
Hi, I saw the link, and promise the latest version of Windows Mobile to put ... but it is an ambiguous answer, because if it does not support anything more than wm5.1, they charge you 27 euros for walking the ipaq (for nothing )....
Click to expand...
Click to collapse
They have a WM5 ROM, but it means that iPAQ update files for rx5000 Series does exist and if I could get those files - most likely I would be able to make a WM6.1 or WM6.5.x ROM.
Hey now Spiaatie - if you're taking requests...
I've been trying to find someone who can cook a ROM for iPAQ rx3115 (straight Pocket PC - no phone). Samsung sc32440 CPU @ 300 mhz. 64MB RAM 32MB ROM...
I have the last update of WM 2003.
http://www.mediafire.com/file/i6k0935chhkgzlh/iPAQ rx3115 ROM 1_01_11.exe
There are a lot of rx3115 owners dying to upgrade. If you cooked a WM 5 of 6.1 ROm for that device I would make sure to spread your fame both far and wide.
RumoredNow said:
I've been trying to find someone who can cook a ROM for iPAQ rx3115 (straight Pocket PC - no phone). Samsung sc32440 CPU @ 300 mhz. 64MB RAM 32MB ROM...
Click to expand...
Click to collapse
Sorry to say, but it's not possible. WM5 needs at least 64MB ROM. And there is no WM5 kernel for iPAQ rx3115 - only HP can make it. Windows CE4 and CE5 have completely different memory managament.
Spiaatie said:
Sorry to say, but it's not possible. WM5 needs at least 64MB ROM. And there is no WM5 kernel for iPAQ rx3115 - only HP can make it. Windows CE4 and CE5 have completely different memory managament.
Click to expand...
Click to collapse
Hello, you can do with a ipaq rx 5935 (5900series)?
System ROM size: 2048Mb
System RAM Size: 64 Mb
Flash Rom: yes
ROM version: 1.00.02
windows mobile 5.1, latest updates:
http://h20000.www2.hp.com/bizsuppor...Id=3263043&swLang=35&taskId=135&swEnvOID=2067
ASakovoy said:
hello, you can do with a ipaq rx 5935 (5900series)?
System ROM size: 2048Mb
System RAM Size: 64 Mb
Flash Rom: if
ROM version: 1.00.02
5.1 m windows latest updates:
Click to expand...
Click to collapse
Theoritically I could make a new ROM, but I still need shipped ROM.
Now I can't do anything, because there is NO ROM file for rx5900 Series iPAQs.
Spiaatie said:
Theoritically I could make a new ROM, but I still need shipped ROM.
Now I can't do anything, because there is NO ROM file for rx5900 Series iPAQs.
Click to expand...
Click to collapse
If it is true .... it is almost impossible to find ... unless you could copy mine own ...
ASakovoy said:
If it is true .... it is almost impossible to find ... unless you could copy mine own ...
Click to expand...
Click to collapse
There is no use of your ROM, as update loader software also is needed.
ASakovoy said:
If it is true .... it is almost impossible to find ... unless you could copy mine own ...
Click to expand...
Click to collapse
anyway, thanks for the tips. and your time