Related
I have managed to install TomTom Navigator 5 on my K-Jam and the application works fine. However I can't get it to talk to my Bluetooth GPS. Have looked here and seen reference to a GPS option in settings but this doesn't appear in my device. Any help please...within the application only a limited number of ports are offered and none match those in the bluetooth options,
cheers,
alastair
Yes there is a problem with WM 5.0 => only TTN5 sees the port.
A solution is to create a virtual port for the GPS with GPSGate
cheers - i have downloaded the application (GPSGate) but can't work out how to configure it. for Com port inputs it simply offers me the same list as in the TTN application and i can't create any virtual port output. a step by step guide would be great!!
Pair your GPS with the PDA, and when prompted make the Virtual COM (serial) port.
After simply use TT5 with "Other NMEA GPS Device CABLED" and set the right COM port to use as COM5 or BT Com Port in the next selection.
Ciao
Or
http://www.modaco.com/How_To_Setup_Tomtom_5_On_K_jam-t229788.html
I have the same problem. My Qtek 2020, 1.60.00WWE with tomtom5.
The GPS devaice is connected to com5 (checked with the gps tester sw).
But in the tomtom windows this port is not listed
I have tied also the GpsGate sw, but again in the GpsGate settings windows in the input port the com5 is not listed.
can you help? thanks
Sorry I cannot because I have had not this problem, but I see you have a very old and troublefull version of the ROM. The first step to do, I think, is to upgrade to a new official ROM or better a unofficial Second Edition ROM.
Mi dispiace ma non posso perchè non ho avuto lo stesso problema, ma vedo che usi una ROM molto vecchia e piena di problemi. Il primo pass, penso, sia l'aggiornare ad una ROM ufficiale più recente o meglio ad una non ufficiale con la Second Edition.
Ciao,
So here's my problem! I had some issues with my herald, it worked fine for like a month or 2. Yesterday, i couldn't see my icons, so i soft booted it. Now bootloops when the SD is in, and gets stuck on the Windows Mobile screen when the SD card isn't inserted... I tried to hardboot but it has no sence since i'm not even able to boot correctly...
Bootloader shows:
IPL 4.17.0001
SPL 4.17.0000
I've got an HTC HERALD
Rom: French Windows Mobile 6
No overclockin nor modding, except of the modded 5tab Homescreen.
Is my Herald bricked? If so, please help me to unbrick it...
Please help me asap, I'm sorry for any ortographical mistakes.
Sounds like you need to install the official RUU for your phone. Go on your carrier's website and see if you can download it.
If not, you can try to install one of the ones on the Herald WIKI and see if that works.
Si t'as des problemes, je peux toujours t'aider sur des messages prive en francais.... car il faut pas ecrire que l'anglais sur ce site. Bon courage.
I was able to unbrick with a RUU, thanks for the information!
You can lock topic
where can i faind original wm5 or wm6 for HTC Trinity ?
my Trinity is Orange brandet SPV M700, the phone is unlocked.
TheHater said:
where can i faind original wm5 or wm6 for HTC Trinity ?
my Trinity is Orange brandet SPV M700, the phone is unlocked.
Click to expand...
Click to collapse
You should start reading the Wiki and searching the threads.
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
http://wiki.xda-developers.com/index.php?pagename=Trinity_DumpedRoms
http://forum.xda-developers.com/showpost.php?p=1887762&postcount=65
multumesc pentru linkuri.
am ajuns la conluzia ca cel mai bun rom e ala cu care vine telefonul din fabrica.am instalat wm5 original htc si merge telefonul super in comparatie cu orice wm6 care l-am incercat de la diferiti cookeri.
daca ai vreo sugestie in legatura cu ce rom ar trebui sa incerc e bine venita.
thx for the links
i come to the conclusion that the best rom is the one that comes with the device from the manufacter.i instaled wm5 from htc an the phone works great in compare with ani other mw6 rom that i tryed from diferent rom cookers.
if you have any sugestion in what rom should i try it is welkomed.
TheHater said:
multumesc pentru linkuri.
am ajuns la conluzia ca cel mai bun rom e ala cu care vine telefonul din fabrica.am instalat wm5 original htc si merge telefonul super in comparatie cu orice wm6 care l-am incercat de la diferiti cookeri.
daca ai vreo sugestie in legatura cu ce rom ar trebui sa incerc e bine venita.
thx for the links
i come to the conclusion that the best rom is the one that comes with the device from the manufacter.i instaled wm5 from htc an the phone works great in compare with ani other mw6 rom that i tryed from diferent rom cookers.
if you have any sugestion in what rom should i try it is welkomed.
Click to expand...
Click to collapse
I can not recommend any ROM to you, it would be against my principle - flaming noobs asking about "which ROM?", "what ROM version?" and so on.
I can only tell you that fastest ROMs are the ones based on WM6.1.
The rest is up to your needs.
ya thx for the answer.
wm5 much faster
tnyynt said:
I can not recommend any ROM to you, it would be against my principle - flaming noobs asking about "which ROM?", "what ROM version?" and so on.
I can only tell you that fastest ROMs are the ones based on WM6.1.
The rest is up to your needs.
Click to expand...
Click to collapse
Hey tyynt
As the saying goes.....you can lead a horse to water...........
hey make funny remarcs on somebody else.
it just my opinion if you don't like it then ...
TheHater said:
hey make funny remarcs on somebody else.
it just my opinion if you don't like it then ...
Click to expand...
Click to collapse
He was not mocking, it's just a saying, I was trying to show you "the way". But hey, it's a free world, everyone is entitled to their opinions, I know I have tried all WWE ROMs from WM5 to WM6.1. Have you?
i did not tryed all off them.i trayed 15 and none of them was good.
i tested various apss on wm5 and wm6 and i did not see ani diference in the performance off the apss.now i wana try the official wm6 from dobod to see how is it.
the batery consumtion in wm5 is much lower than in wm6,probapli because it uses less ram.
maybee i do no how tu configure it.
kaleyn
Junior Member Join Date: Apr 2008
--------------------------------------------------------------------------------
still nobody has solved my problem...
plz any senior member .. u must have a solution....
give me that...
Even with radio upgrades it stops automatically saying that
Error 270: Update Error
The image file is corrupted please check your update utility....
Quote:
Originally Posted by kaleyn
use USPL to get rid of the CID....count goes up to 100% screen shows black, blue green, then pops to white. I need to do a soft reset to get it running again.
Then i use ROM Update Utility to update my p3300....and it still keeps hanging on 3%....damn. i get mad...!! Have read almost all here online...no virusscanner, no firewall....I use Vista.
i even tried without memory card and phone card....and nothing seems to work.......
Rom version: 3.7.707.1 WWE
Rom date: 6/21/07
Radio Version: 02.69.90
Protocol version: 4.1.13.30
ExtROM Version: 3.6.707.101
please help
Are u using Win Vista or Xp?
I Know,
But i think phone is still CID locked?? or ROM file is to big. Artemis is flashable with VISTA
--
amerr said:
Hi Kaleyn,
I was having the same problem on xp with sp3, i was getting error 270 and it was driving me mental. remove the memory card and then use uspl to remove CID protection, let it go to 100%, you said your screen then goes white, on my Artemis, I was once shown the linux duck but for the most part the screen goes black. at this point it loses sync with the pc, the green icon goes white on the pc showing its no longer synched, ignore this and do not reset your phone. Instead close down uspl and open the rom update utility. your phone is still in sync with the pc but by doing a reset it messes it up. trust me it works, i have flashed my phone loadsa times now without any problems.
So when USPL is at 100% and your screen goes white, DO NOT TOUCH YOUR PHONE, just close USPL and open RUU and update and then like magic it should have uploaded your new rom and you'll be a happy bunny
Click to expand...
Click to collapse
Dude I did the same but I am getting same error I'm ****ed !!
I also have the same problem.
Already took the SIM card and the microSD.
I did u USPL, HARDSPL, etc etc. ..
Already tried with Vista and XP
Someone has discovered the origin of this problem?
Error 270...
--------------------------------------------------------------------
Eu também tenho o mesmo problema.
Já tirei o cartão SIM, bem como o microSD.
Já fiz u USPL, HARDSPL, etc etc..
Já experimentei com o Vista e com o XP
Alguém já descobriu a origem deste problema?
Solução para o Error 270
Finally I got it.
For those who have not yet managed to do the following:
1 USPL;
2 when finishing the USPL, let the screen stay in black / white and wait a while to restart the PDA. Is not seen, but the PDA is connected;
3 without touching the PDA or disconnect the USB cable, run your favorite ROM.
RC
--------------------------------------------
Finalmente já consegui.
Para quem ainda não conseguiu tem de fazer o seguinte:
1º USPL;
2º quando acabar o USPL, deixar que o ecra fique em preto/branco e aguardar um tempo que o PDA reinicie. Não se vê, mas o PDA está ligado;
3º sem tocar no PDA nem desligar o cabo USB, correr a vossa ROM preferida.
RC
RCabrita said:
Finally I got it.
For those who have not yet managed to do the following:
1 USPL;
2 when finishing the USPL, let the screen stay in black / white and wait a while to restart the PDA. Is not seen, but the PDA is connected;
3 without touching the PDA or disconnect the USB cable, run your favorite ROM.
RC
--------------------------------------------
Finalmente já consegui.
Para quem ainda não conseguiu tem de fazer o seguinte:
1º USPL;
2º quando acabar o USPL, deixar que o ecra fique em preto/branco e aguardar um tempo que o PDA reinicie. Não se vê, mas o PDA está ligado;
3º sem tocar no PDA nem desligar o cabo USB, correr a vossa ROM preferida.
RC
Click to expand...
Click to collapse
That is written in the USPL manual...
Before you try anything just read the manuals first... They are there to help, not just to say what a wonderfull program it is.
Cheers
Zecanilis said:
That is written in the USPL manual...
Before you try anything just read the manuals first... They are there to help, not just to say what a wonderfull program it is.
Cheers
Click to expand...
Click to collapse
Yes, you are right!
I had done almost all of USPL, but did not expect the time. Maybe not this time to restart the PDA.
Thanks and I apologize.
RC
Jeez can this be in a clearer thread, Amerr nailed my problem but it took me 4 hrs to find this solution. Thanks a
hey guyes, tried everything .... stilll not doin
rik.vanoijen said:
Jeez can this be in a clearer thread, Amerr nailed my problem but it took me 4 hrs to find this solution. Thanks a
Click to expand...
Click to collapse
will u plz quote the solution u found
kaleyn said:
will u plz quote the solution u found
Click to expand...
Click to collapse
what the hell still no sound solution..
i never expected..
this is crab ..
Today my internet connection is a bit fast, so i only took 2 sec to find your answer.
http://forum.xda-developers.com/showpost.php?p=1312109&postcount=118
Thanks for all
thanks Guy, you are the best, i follow your steps and i get it easy. thank you. sore about my english.
Hi, I have a HP Ipaq rx5900 Poquet pc with tom tom 6 in europe
comes from the factory with Windows Mobile 5.1, and wanted to install Windows 6.0 or 6.5, if possible.
But...
first .... as it is?
second, how to install on sd card "tom tom 6 or 7"again?
Any link for windows 6.0 or 6.5 for my ipaq rx 5900?
Please, I need to "rescue" my ipaq rx 5900, so it is not too old. thanks.
--------------------
En Español:
Hola, tengo un poquet pc HP Ipaq rx5900 con tom tom 6 de europa,
viene de fabrica con windows mobile 5.1, y quisiera instalarle windows 6.0 o 6.5, si es posible.
pero primero....como se hace?
segundo: como instalar en sd card "tom tom 6 o 7 " de nuevo?
Algun enlace para windows 6.0 or 6.5 para mi ipaq rx 5900?
Por favor, Necesito " rescatar " mi ipaq rx 5900, para que no quede demasiado antiguo .gracias.
If u have off rom wm5 + off updater it can be wm6.1/5.
If no = no update
Hello ASakovoy,
I know how you feel... At least WM 5 will be supported for a little while longer. I've been trying to upgrade a WM 2003 iPAQ (Next to be dropped from support). It is hard finding upgrades for these machines.
Since HP never issued an upgrade for the rx5900 series you will have to try your luck Googling for ROMs. Someone may have cooked one for your device. I've found that lots of persistent searching is better to get results than just asking and hoping someone who knows finds your request. Sorry, the searching really is up to you. I hope you have better luck than I have had so far.
HP does have Tom Tom 6 Western Europe for download still:
http://h20000.www2.hp.com/bizsuppor...cc=us&swItem=ip-48733-1&jumpid=reg_R1002_USEN
I assume it is in ENGlish. You may want to download the file and save it on your PC.
Another option to look at is getting Linux to boot on your device. Most likely you would boot into Linux from an SD card - rather than flashing your ROM. Then you could choose between WM and Linux as needed.
That too appears hard to accomplish. Your device has a similar processor to my rx3115. They both use the Samsung sc3244x cpu with an ARMv4T instruction set. More work has been done (both for WM and Linux) for Intel and Texas Instrument cpu's...
But if you look around enough you might find some options.
Good Luck.
Can't really help with what your asking but would like to make one suggestion for improvement. I'm able to use an 8GB SDHC card with my RX5915 using the hack in this thread.
http://forum.xda-developers.com/showthread.php?t=344338
Only problem I have with the hack is having to do a soft reset to get the card recognized again after the unit shuts off.
RumoredNow said:
Hello ASakovoy,
I know how you feel... At least WM 5 will be supported for a little while longer. I've been trying to upgrade a WM 2003 iPAQ (Next to be dropped from support). It is hard finding upgrades for these machines.
Since HP never issued an upgrade for the rx5900 series you will have to try your luck Googling for ROMs. Someone may have cooked one for your device. I've found that lots of persistent searching is better to get results than just asking and hoping someone who knows finds your request. Sorry, the searching really is up to you. I hope you have better luck than I have had so far.
HP does have Tom Tom 6 Western Europe for download still:
http://h20000.www2.hp.com/bizsuppor...cc=us&swItem=ip-48733-1&jumpid=reg_R1002_USEN
I assume it is in ENGlish. You may want to download the file and save it on your PC.
Another option to look at is getting Linux to boot on your device. Most likely you would boot into Linux from an SD card - rather than flashing your ROM. Then you could choose between WM and Linux as needed.
That too appears hard to accomplish. Your device has a similar processor to my rx3115. They both use the Samsung sc3244x cpu with an ARMv4T instruction set. More work has been done (both for WM and Linux) for Intel and Texas Instrument cpu's...
But if you look around enough you might find some options.
Good Luck.
Click to expand...
Click to collapse
Hello RumoredNow:
Thank you for your contribution. look at the link Tom Tom 6.
to me is more important now to get a WM6 or more to serve my "ipaq".
Or all windows mobile (wm6 to wm6) are the same, removing the language, and little else?
supports my "ipaq" a wm6 or wm6.5?
how do I install on my sd card?
-----------------------
En Español:
Hola RumoredNow :
Gracias por tu aportacion. mirare el enlace del Tom Tom 6.
para mi es mas importante ahora conseguir un WM6 o superior que sirva a mi " ipaq".
O todos los windows mobile (wm6 contra wm6) son iguales, quitando el idioma, y poco mas?
soporta mi "ipaq" un wm6 o wm6.5?
como lo instalo en mi sd card?
The answers are never easy, I'm finding out...
You may want to look at my thread of what I've been going through to try and upgrade an old iPAQ:
http://forum.xda-developers.com/showthread.php?t=981868
Are you asking how to install a ROM flash from an SD card?
To upgrade your OS off the card?
First you need someone who has a compatible ROM. That's what you have to search for.
RumoredNow said:
The answers are never easy, I'm finding out...
You may want to look at my thread of what I've been going through to try and upgrade an old iPAQ:
http://forum.xda-developers.com/showthread.php?t=981868
Are you asking how to install a ROM flash from an SD card?
To upgrade your OS off the card?
First you need someone who has a compatible ROM. That's what you have to search for.
Click to expand...
Click to collapse
Hi RumoredNow , I'm reading all your lengthy post, with the difficulty that my English is very bad and usually need a translator (google translator), so the translation is not perfect, and therefore the understanding is more complicated.
And it is clear that the important thing is to find a wm6 rom or above compatible (or a cooked wm5.1 ...).
The other day I saw a video on my ipaq and I see that has features that I do not see in my Poquet ... so I think it's a cooked wm5.1 version.
http://www.youtube.com/watch?v=py1d3imfb9u&feature=player_embedded
If it is true that is cooked, it means that deveria be a there to download ... where? that is the question .....
SORRY......I saw a problem in the direct link of the video.
to see him, I'll put the link before and so you just have to click on the video where it says:
http://wn.com/iPAQ_iPhone_is_possible!
Video: (click it) HP iPAQ rx5900 Travel Companion GPS ** for sale **
------------------------------------
En Español:
Hola RumoredNow , me estoy leyendo todo tu extenso post, con la dificultad que mi ingles es muy malo y necesito un traductor habitualmente(google traductor) , de esta manera la traduccion no es perfecta, y por tanto la comprension es mas complicada.
Y esta claro que lo verdaderamente importante es encontrar una rom de wm6 o superior compatible (o un wm5.1 cocinado...).
el otro dia vi un video sobre mi ipaq y veo que tiene funciones que yo no veo en mi poquet...por tanto creo que es una version cocinada de wm5.1.
http://www.youtube.com/watch?v=py1d3imfb9u&feature=player_embedded
Si es cierto que esta cocinada, quiere decir que deveria haber una por ahi para descargarla...donde? esa es la cuestion.....
LOL - I have seen that video. That is my iPAQ model series (rx3000) they show on there.
That is not an Operating System. It is just a dressed up display to LOOK like iPhone.
It is only eye-candy. If you take your dog and put a child's costume on him so he is dressed up like a cat - he will still BE a dog and ACT LIKE a dog. Same thing. You just dress the iPAQ in the costume of iPhone, but it still would BE WM 5.
ASakovoy said:
Hi RumoredNow , I'm reading all your lengthy post, with the difficulty that my English is very bad ....
Click to expand...
Click to collapse
I Own an rx 5910. I have done quite a bit of research and so far I can tell you that: there is no possibility NOW of upgrading it to wm6. . Actually it seems that most probably it will never happen: to have wm 6 on rx 5900 series. If you are interested, I could post two or three links of threads in this forum and elsewhere that make this very clear.
In the youtube post you make above, there are many videos involved and am not sure which one you are referring to. If it is the one on voice commands on rx 5910, you simply have to get voice to go. I have it installed in my iPAQ and from time to time I do use it when am driving.
Egnubo said:
I Own an rx 5910. I have done quite a bit of research and so far I can tell you that: there is no possibility NOW of upgrading it to wm6. . Actually it seems that most probably it will never happen: to have wm 6 on rx 5900 series.
Click to expand...
Click to collapse
It could happen if someone could get rx5000 Series ROM update files.
As they are available to repair and service centers. Example [here]
Spiaatie said:
It could happen if someone could get rx5000 Series ROM update files.
As they are available to repair and service centers. Example [here]
Click to expand...
Click to collapse
Hi, I saw the link, and promise the latest version of Windows Mobile to put ... but it is an ambiguous answer, because if it does not support anything more than wm5.1, they charge you 27 euros for walking the ipaq (for nothing )....
RumoredNow said:
LOL - I have seen that video. That is my iPAQ model series (rx3000) they show on there.
That is not an Operating System. It is just a dressed up display to LOOK like iPhone.
It is only eye-candy. If you take your dog and put a child's costume on him so he is dressed up like a cat - he will still BE a dog and ACT LIKE a dog. Same thing. You just dress the iPAQ in the costume of iPhone, but it still would BE WM 5.
Click to expand...
Click to collapse
Yes, maybe you're right, but if it seems it is impossible to upper windows, our iPAQ's, we would have to ask whether we settle for a custom rom of wm5 ... ..
even so, do not give up ..
ASakovoy said:
Hi, I saw the link, and promise the latest version of Windows Mobile to put ... but it is an ambiguous answer, because if it does not support anything more than wm5.1, they charge you 27 euros for walking the ipaq (for nothing )....
Click to expand...
Click to collapse
They have a WM5 ROM, but it means that iPAQ update files for rx5000 Series does exist and if I could get those files - most likely I would be able to make a WM6.1 or WM6.5.x ROM.
Hey now Spiaatie - if you're taking requests...
I've been trying to find someone who can cook a ROM for iPAQ rx3115 (straight Pocket PC - no phone). Samsung sc32440 CPU @ 300 mhz. 64MB RAM 32MB ROM...
I have the last update of WM 2003.
http://www.mediafire.com/file/i6k0935chhkgzlh/iPAQ rx3115 ROM 1_01_11.exe
There are a lot of rx3115 owners dying to upgrade. If you cooked a WM 5 of 6.1 ROm for that device I would make sure to spread your fame both far and wide.
RumoredNow said:
I've been trying to find someone who can cook a ROM for iPAQ rx3115 (straight Pocket PC - no phone). Samsung sc32440 CPU @ 300 mhz. 64MB RAM 32MB ROM...
Click to expand...
Click to collapse
Sorry to say, but it's not possible. WM5 needs at least 64MB ROM. And there is no WM5 kernel for iPAQ rx3115 - only HP can make it. Windows CE4 and CE5 have completely different memory managament.
Spiaatie said:
Sorry to say, but it's not possible. WM5 needs at least 64MB ROM. And there is no WM5 kernel for iPAQ rx3115 - only HP can make it. Windows CE4 and CE5 have completely different memory managament.
Click to expand...
Click to collapse
Hello, you can do with a ipaq rx 5935 (5900series)?
System ROM size: 2048Mb
System RAM Size: 64 Mb
Flash Rom: yes
ROM version: 1.00.02
windows mobile 5.1, latest updates:
http://h20000.www2.hp.com/bizsuppor...Id=3263043&swLang=35&taskId=135&swEnvOID=2067
ASakovoy said:
hello, you can do with a ipaq rx 5935 (5900series)?
System ROM size: 2048Mb
System RAM Size: 64 Mb
Flash Rom: if
ROM version: 1.00.02
5.1 m windows latest updates:
Click to expand...
Click to collapse
Theoritically I could make a new ROM, but I still need shipped ROM.
Now I can't do anything, because there is NO ROM file for rx5900 Series iPAQs.
Spiaatie said:
Theoritically I could make a new ROM, but I still need shipped ROM.
Now I can't do anything, because there is NO ROM file for rx5900 Series iPAQs.
Click to expand...
Click to collapse
If it is true .... it is almost impossible to find ... unless you could copy mine own ...
ASakovoy said:
If it is true .... it is almost impossible to find ... unless you could copy mine own ...
Click to expand...
Click to collapse
There is no use of your ROM, as update loader software also is needed.
ASakovoy said:
If it is true .... it is almost impossible to find ... unless you could copy mine own ...
Click to expand...
Click to collapse
anyway, thanks for the tips. and your time