Database Users

original ROM's for HTC Trinity

where can i faind original wm5 or wm6 for HTC Trinity ?
my Trinity is Orange brandet SPV M700, the phone is unlocked.

TheHater said:
where can i faind original wm5 or wm6 for HTC Trinity ?
my Trinity is Orange brandet SPV M700, the phone is unlocked.
Click to expand...
Click to collapse
You should start reading the Wiki and searching the threads.
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
http://wiki.xda-developers.com/index.php?pagename=Trinity_DumpedRoms
http://forum.xda-developers.com/showpost.php?p=1887762&postcount=65

multumesc pentru linkuri.
am ajuns la conluzia ca cel mai bun rom e ala cu care vine telefonul din fabrica.am instalat wm5 original htc si merge telefonul super in comparatie cu orice wm6 care l-am incercat de la diferiti cookeri.
daca ai vreo sugestie in legatura cu ce rom ar trebui sa incerc e bine venita.
thx for the links
i come to the conclusion that the best rom is the one that comes with the device from the manufacter.i instaled wm5 from htc an the phone works great in compare with ani other mw6 rom that i tryed from diferent rom cookers.
if you have any sugestion in what rom should i try it is welkomed.

TheHater said:
multumesc pentru linkuri.
am ajuns la conluzia ca cel mai bun rom e ala cu care vine telefonul din fabrica.am instalat wm5 original htc si merge telefonul super in comparatie cu orice wm6 care l-am incercat de la diferiti cookeri.
daca ai vreo sugestie in legatura cu ce rom ar trebui sa incerc e bine venita.
thx for the links
i come to the conclusion that the best rom is the one that comes with the device from the manufacter.i instaled wm5 from htc an the phone works great in compare with ani other mw6 rom that i tryed from diferent rom cookers.
if you have any sugestion in what rom should i try it is welkomed.
Click to expand...
Click to collapse
I can not recommend any ROM to you, it would be against my principle - flaming noobs asking about "which ROM?", "what ROM version?" and so on.
I can only tell you that fastest ROMs are the ones based on WM6.1.
The rest is up to your needs.

ya thx for the answer.
wm5 much faster

tnyynt said:
I can not recommend any ROM to you, it would be against my principle - flaming noobs asking about "which ROM?", "what ROM version?" and so on.
I can only tell you that fastest ROMs are the ones based on WM6.1.
The rest is up to your needs.
Click to expand...
Click to collapse
Hey tyynt
As the saying goes.....you can lead a horse to water...........

hey make funny remarcs on somebody else.
it just my opinion if you don't like it then ...

TheHater said:
hey make funny remarcs on somebody else.
it just my opinion if you don't like it then ...
Click to expand...
Click to collapse
He was not mocking, it's just a saying, I was trying to show you "the way". But hey, it's a free world, everyone is entitled to their opinions, I know I have tried all WWE ROMs from WM5 to WM6.1. Have you?

i did not tryed all off them.i trayed 15 and none of them was good.
i tested various apss on wm5 and wm6 and i did not see ani diference in the performance off the apss.now i wana try the official wm6 from dobod to see how is it.
the batery consumtion in wm5 is much lower than in wm6,probapli because it uses less ram.
maybee i do no how tu configure it.

Loading ROM bad in HTC Cruise... HELP !!!

Dear, I need help urgently .... for some time by changing the ROM of my HTC Cruise staying at 90%, to restart only is the screen:
The colors red, green, blue and white
POLA100
SPL-1.28.0000
CPLD-2
I tried everything that is mentioned in the post and I can not run my device, I need urgent help ...
Some have told me that there is no settlement and I have to think about buying a new ...
my English is not good ..

Yo son, it looks like you didnt unlock your device. It should read:
POLA 100
SPL 2.20 Olinex
CPLD-2
Some one correct me if I'm wrong but that should be the proper SPL in order to flash.
What did you do?

Try this / Prueba esto
Hi. I've same problem. Try this:
http://forum.xda-developers.com/show...45&postcount=4
Yo tuve el mismo problema. Prueba con esto. Funciona.
Regards / Saludos
acern50

please, can U post the URL again!?? because actually don't works!

cleverizzo said:
please, can U post the URL again!?? because actually don't works!
Click to expand...
Click to collapse
Read this: http://forum.xda-developers.com/showthread.php?t=381600
You must HardSPL your device .
kr.,
Frepke

[Q] qTek S100 improvements

Hello guys!
I own a qTek S100 that was once a TMN cell phone, but now is unlocked and is using a Vodafone Portugal sim card. As you know, the phone is equipped with the Windows Mobile 2003, and its version is:
4.21.1088 (Build 15045.2.6.0)
The ROM of the device is:
1.12.00 WWE
What do you, experts, advise, to improve this cell phone, and make it even better than it already is?
Apps, ROMs, and everything you know better than I do, are welcome!!!
Thank you in advance!

MGuedes said:
Hello guys!
I own a qTek S100 that was once a TMN cell phone, but now is unlocked and is using a Vodafone Portugal sim card. As you know, the phone is equipped with the Windows Mobile 2003, and its version is:
4.21.1088 (Build 15045.2.6.0)
The ROM of the device is:
1.12.00 WWE
What do you, experts, advise, to improve this cell phone, and make it even better than it already is?
Apps, ROMs, and everything you know better than I do, are welcome!!!
Thank you in advance!
Click to expand...
Click to collapse
You can try Cotulla's Wm6.1 ROMS
and you can also trash that racist vodafone scumbags and pick a real SP

Thanks for your answer, Riki! I never thought about that connection! Quite interesting!
Anyway, I'm a bit afraid of trying Cotulla's ROM because perhaps it wouldn't work, and then I'd lose my cell phone.. Do you think it's safe to try it? Isn't there too much of a risk?

MGuedes said:
Thanks for your answer, Riki! I never thought about that connection! Quite interesting!
Anyway, I'm a bit afraid of trying Cotulla's ROM because perhaps it wouldn't work, and then I'd lose my cell phone.. Do you think it's safe to try it? Isn't there too much of a risk?
Click to expand...
Click to collapse
I guess, you just live to follow and understand instructions given by Cotulla to succeed to flash ROMS Wm6.1

Well, thanks.
Lately, my qTek is facing a problem. I don't have any call sounds. I can't hear people talking to me, and neither can I hear the call tones when I'm calling someone. All the other sounds are audible.

MGuedes said:
Well, thanks.
Lately, my qTek is facing a problem. I don't have any call sounds. I can't hear people talking to me, and neither can I hear the call tones when I'm calling someone. All the other sounds are audible.
Click to expand...
Click to collapse
what radio version do you use on your device today ??

Sorry? I don't understand what you're saying..

MGuedes said:
Sorry? I don't understand what you're saying..
Click to expand...
Click to collapse
I mean, what version of radio carriers ( such as type of 1.12.00 and others) and try to upgrade the radio! maybe it happened ( call vote, can not hear people talking, did not hear the tone of the call ) because the radio version that is not appropriate...

I have the 1.12.00 version. Is there any higher than that?

MGuedes said:
I have the 1.12.00 version. Is there any higher than that?
Click to expand...
Click to collapse
You can get all the radio version for htc magician at http://forum.xda-developers.com/showthread.php?t=705702

MGuedes said:
Well, thanks.
Lately, my qTek is facing a problem. I don't have any call sounds. I can't hear people talking to me, and neither can I hear the call tones when I'm calling someone. All the other sounds are audible.
Click to expand...
Click to collapse
I have that problem too on my 2nd hand Magician, I've bought it that way because I'm using this a test device.
------------
Eu comprei o meu S100 já com esse problema, se for o mesmo problema do meu então deve ser a coluna interna do telefone avariada. Este telemovel tem duas colunas de som, uma normal por exemplo que é utilizada pelo Windows media player, e a outra que é utilizada pelo telefone. Tenta o seguinte, quando fizeres ou receberes uma chamada, coloca-a em alta-voz (pressiona longamente o botao verde para atenderes em alta-voz) e confirma se assim já consegues ouvir. Se conseguires, é a coluna interna do telefone que avariou. Há um tipo no Algarve que arranja isso, mas cobra ainda um pouco carote, e tens de enviar pelo correio. Eu não enviei porque o meu magician já tem montes de probs e eu uso isto para outras coisas que não telefonar Um abraço
------------
About the radio version, I recommend you continue to use 1.12.00, I have it instead of 1.13 because Cotulla ROM's only work on 1.12 and since I'm always changing between 6.1 and wm2003, I always leave it with 1.12

iRiKi said:
I have that problem too on my 2nd hand Magician, I've bought it that way because I'm using this a test device.
------------
Eu comprei o meu S100 já com esse problema, se for o mesmo problema do meu então deve ser a coluna interna do telefone avariada. Este telemovel tem duas colunas de som, uma normal por exemplo que é utilizada pelo Windows media player, e a outra que é utilizada pelo telefone. Tenta o seguinte, quando fizeres ou receberes uma chamada, coloca-a em alta-voz (pressiona longamente o botao verde para atenderes em alta-voz) e confirma se assim já consegues ouvir. Se conseguires, é a coluna interna do telefone que avariou. Há um tipo no Algarve que arranja isso, mas cobra ainda um pouco carote, e tens de enviar pelo correio. Eu não enviei porque o meu magician já tem montes de probs e eu uso isto para outras coisas que não telefonar Um abraço
------------
About the radio version, I recommend you continue to use 1.12.00, I have it instead of 1.13 because Cotulla ROM's only work on 1.12 and since I'm always changing between 6.1 and wm2003, I always leave it with 1.12
Click to expand...
Click to collapse
Thanks.. Since I hear all the other noises, it's probably the call-speaker that is malfunctioning.. Anyway, since the last time I came here, that speaker came back to life and now is dead again, so, I just carry a pair of headphones on my pocket, that I use whenever I want to call or answer people.. It's a bit annoying because the wires keep tangling up, but has its advantages..
If you flash Cotulla's ROMs, you can then return to WM2003?
And besides those ROMs, what more do you advise me to do?
I have at home one of those Samsung Vodafone 360 M1, which was offered to me by a magazine to which I collaborate. But that SO (LiMo) is buggy as hell, so, it's now in my desk, on my room, with no use.. And with 90% of my contacts, because I couldn't find a clever way to pass them to the qTek again..

MGuedes said:
Thanks.. Since I hear all the other noises, it's probably the call-speaker that is malfunctioning.. Anyway, since the last time I came here, that speaker came back to life and now is dead again, so, I just carry a pair of headphones on my pocket, that I use whenever I want to call or answer people.. It's a bit annoying because the wires keep tangling up, but has its advantages..
If you flash Cotulla's ROMs, you can then return to WM2003?
And besides those ROMs, what more do you advise me to do?
I have at home one of those Samsung Vodafone 360 M1, which was offered to me by a magazine to which I collaborate. But that SO (LiMo) is buggy as hell, so, it's now in my desk, on my room, with no use.. And with 90% of my contacts, because I couldn't find a clever way to pass them to the qTek again..
Click to expand...
Click to collapse
Speaker back to life!

Another doubt. My cell phone now periodically shuts down my calls, at 8 minutes.. What can I do? How can I solve this?

My qTek is now doing Hard Resets every day, with no apparent reason. What do you think it's causing this?

Sorry about the late reply, but Android is now the king! anyways that also happens to me, it's because of a red switch located on the right side of the phone, when you remove the battery.my solution was to put a piece of paper so it doesn't hard reset.good luck!
Sent from my Boston using xda app-developers app

iRiKi said:
Sorry about the late reply, but Android is now the king! anyways that also happens to me, it's because of a red switch located on the right side of the phone, when you remove the battery.my solution was to put a piece of paper so it doesn't hard reset.good luck!
Sent from my Boston using xda app-developers app
Click to expand...
Click to collapse
Oh.. Thanks anyway!

MGuedes said:
Oh.. Thanks anyway!
Click to expand...
Click to collapse
There's a guy in Algarve that knows how to fix this old phones.. if you want I can give you his contact, just pm me.

MGuedes said:
Well, thanks.
Lately, my qTek is facing a problem. I don't have any call sounds. I can't hear people talking to me, and neither can I hear the call tones when I'm calling someone. All the other sounds are audible.
Click to expand...
Click to collapse
I had this same problem years ago. The device has two speakers. One at the back for the multimedia purposes and the other one at the top front for hearing calls. The front speaker got damaged and i had to get it replaced at a local shop. Then it worked like a charm!
And that ROM works.

HP iPAQ rx5900 rescue please!

Hi, I have a HP Ipaq rx5900 Poquet pc with tom tom 6 in europe
comes from the factory with Windows Mobile 5.1, and wanted to install Windows 6.0 or 6.5, if possible.
But...
first .... as it is?
second, how to install on sd card "tom tom 6 or 7"again?
Any link for windows 6.0 or 6.5 for my ipaq rx 5900?
Please, I need to "rescue" my ipaq rx 5900, so it is not too old. thanks.
--------------------
En Español:
Hola, tengo un poquet pc HP Ipaq rx5900 con tom tom 6 de europa,
viene de fabrica con windows mobile 5.1, y quisiera instalarle windows 6.0 o 6.5, si es posible.
pero primero....como se hace?
segundo: como instalar en sd card "tom tom 6 o 7 " de nuevo?
Algun enlace para windows 6.0 or 6.5 para mi ipaq rx 5900?
Por favor, Necesito " rescatar " mi ipaq rx 5900, para que no quede demasiado antiguo .gracias.

If u have off rom wm5 + off updater it can be wm6.1/5.
If no = no update

Hello ASakovoy,
I know how you feel... At least WM 5 will be supported for a little while longer. I've been trying to upgrade a WM 2003 iPAQ (Next to be dropped from support). It is hard finding upgrades for these machines.
Since HP never issued an upgrade for the rx5900 series you will have to try your luck Googling for ROMs. Someone may have cooked one for your device. I've found that lots of persistent searching is better to get results than just asking and hoping someone who knows finds your request. Sorry, the searching really is up to you. I hope you have better luck than I have had so far.
HP does have Tom Tom 6 Western Europe for download still:
http://h20000.www2.hp.com/bizsuppor...cc=us&swItem=ip-48733-1&jumpid=reg_R1002_USEN
I assume it is in ENGlish. You may want to download the file and save it on your PC.
Another option to look at is getting Linux to boot on your device. Most likely you would boot into Linux from an SD card - rather than flashing your ROM. Then you could choose between WM and Linux as needed.
That too appears hard to accomplish. Your device has a similar processor to my rx3115. They both use the Samsung sc3244x cpu with an ARMv4T instruction set. More work has been done (both for WM and Linux) for Intel and Texas Instrument cpu's...
But if you look around enough you might find some options.
Good Luck.

Can't really help with what your asking but would like to make one suggestion for improvement. I'm able to use an 8GB SDHC card with my RX5915 using the hack in this thread.
http://forum.xda-developers.com/showthread.php?t=344338
Only problem I have with the hack is having to do a soft reset to get the card recognized again after the unit shuts off.

RumoredNow said:
Hello ASakovoy,
I know how you feel... At least WM 5 will be supported for a little while longer. I've been trying to upgrade a WM 2003 iPAQ (Next to be dropped from support). It is hard finding upgrades for these machines.
Since HP never issued an upgrade for the rx5900 series you will have to try your luck Googling for ROMs. Someone may have cooked one for your device. I've found that lots of persistent searching is better to get results than just asking and hoping someone who knows finds your request. Sorry, the searching really is up to you. I hope you have better luck than I have had so far.
HP does have Tom Tom 6 Western Europe for download still:
http://h20000.www2.hp.com/bizsuppor...cc=us&swItem=ip-48733-1&jumpid=reg_R1002_USEN
I assume it is in ENGlish. You may want to download the file and save it on your PC.
Another option to look at is getting Linux to boot on your device. Most likely you would boot into Linux from an SD card - rather than flashing your ROM. Then you could choose between WM and Linux as needed.
That too appears hard to accomplish. Your device has a similar processor to my rx3115. They both use the Samsung sc3244x cpu with an ARMv4T instruction set. More work has been done (both for WM and Linux) for Intel and Texas Instrument cpu's...
But if you look around enough you might find some options.
Good Luck.
Click to expand...
Click to collapse
Hello RumoredNow:
Thank you for your contribution. look at the link Tom Tom 6.
to me is more important now to get a WM6 or more to serve my "ipaq".
Or all windows mobile (wm6 to wm6) are the same, removing the language, and little else?
supports my "ipaq" a wm6 or wm6.5?
how do I install on my sd card?
-----------------------
En Español:
Hola RumoredNow :
Gracias por tu aportacion. mirare el enlace del Tom Tom 6.
para mi es mas importante ahora conseguir un WM6 o superior que sirva a mi " ipaq".
O todos los windows mobile (wm6 contra wm6) son iguales, quitando el idioma, y poco mas?
soporta mi "ipaq" un wm6 o wm6.5?
como lo instalo en mi sd card?

The answers are never easy, I'm finding out...
You may want to look at my thread of what I've been going through to try and upgrade an old iPAQ:
http://forum.xda-developers.com/showthread.php?t=981868
Are you asking how to install a ROM flash from an SD card?
To upgrade your OS off the card?
First you need someone who has a compatible ROM. That's what you have to search for.

RumoredNow said:
The answers are never easy, I'm finding out...
You may want to look at my thread of what I've been going through to try and upgrade an old iPAQ:
http://forum.xda-developers.com/showthread.php?t=981868
Are you asking how to install a ROM flash from an SD card?
To upgrade your OS off the card?
First you need someone who has a compatible ROM. That's what you have to search for.
Click to expand...
Click to collapse
Hi RumoredNow , I'm reading all your lengthy post, with the difficulty that my English is very bad and usually need a translator (google translator), so the translation is not perfect, and therefore the understanding is more complicated.
And it is clear that the important thing is to find a wm6 rom or above compatible (or a cooked wm5.1 ...).
The other day I saw a video on my ipaq and I see that has features that I do not see in my Poquet ... so I think it's a cooked wm5.1 version.
http://www.youtube.com/watch?v=py1d3imfb9u&feature=player_embedded
If it is true that is cooked, it means that deveria be a there to download ... where? that is the question .....
SORRY......I saw a problem in the direct link of the video.
to see him, I'll put the link before and so you just have to click on the video where it says:
http://wn.com/iPAQ_iPhone_is_possible!
Video: (click it) HP iPAQ rx5900 Travel Companion GPS ** for sale **
------------------------------------
En Español:
Hola RumoredNow , me estoy leyendo todo tu extenso post, con la dificultad que mi ingles es muy malo y necesito un traductor habitualmente(google traductor) , de esta manera la traduccion no es perfecta, y por tanto la comprension es mas complicada.
Y esta claro que lo verdaderamente importante es encontrar una rom de wm6 o superior compatible (o un wm5.1 cocinado...).
el otro dia vi un video sobre mi ipaq y veo que tiene funciones que yo no veo en mi poquet...por tanto creo que es una version cocinada de wm5.1.
http://www.youtube.com/watch?v=py1d3imfb9u&feature=player_embedded
Si es cierto que esta cocinada, quiere decir que deveria haber una por ahi para descargarla...donde? esa es la cuestion.....

LOL - I have seen that video. That is my iPAQ model series (rx3000) they show on there.
That is not an Operating System. It is just a dressed up display to LOOK like iPhone.
It is only eye-candy. If you take your dog and put a child's costume on him so he is dressed up like a cat - he will still BE a dog and ACT LIKE a dog. Same thing. You just dress the iPAQ in the costume of iPhone, but it still would BE WM 5.

ASakovoy said:
Hi RumoredNow , I'm reading all your lengthy post, with the difficulty that my English is very bad ....
Click to expand...
Click to collapse
I Own an rx 5910. I have done quite a bit of research and so far I can tell you that: there is no possibility NOW of upgrading it to wm6. . Actually it seems that most probably it will never happen: to have wm 6 on rx 5900 series. If you are interested, I could post two or three links of threads in this forum and elsewhere that make this very clear.
In the youtube post you make above, there are many videos involved and am not sure which one you are referring to. If it is the one on voice commands on rx 5910, you simply have to get voice to go. I have it installed in my iPAQ and from time to time I do use it when am driving.

Egnubo said:
I Own an rx 5910. I have done quite a bit of research and so far I can tell you that: there is no possibility NOW of upgrading it to wm6. . Actually it seems that most probably it will never happen: to have wm 6 on rx 5900 series.
Click to expand...
Click to collapse
It could happen if someone could get rx5000 Series ROM update files.
As they are available to repair and service centers. Example [here]

Spiaatie said:
It could happen if someone could get rx5000 Series ROM update files.
As they are available to repair and service centers. Example [here]
Click to expand...
Click to collapse
Hi, I saw the link, and promise the latest version of Windows Mobile to put ... but it is an ambiguous answer, because if it does not support anything more than wm5.1, they charge you 27 euros for walking the ipaq (for nothing )....

RumoredNow said:
LOL - I have seen that video. That is my iPAQ model series (rx3000) they show on there.
That is not an Operating System. It is just a dressed up display to LOOK like iPhone.
It is only eye-candy. If you take your dog and put a child's costume on him so he is dressed up like a cat - he will still BE a dog and ACT LIKE a dog. Same thing. You just dress the iPAQ in the costume of iPhone, but it still would BE WM 5.
Click to expand...
Click to collapse
Yes, maybe you're right, but if it seems it is impossible to upper windows, our iPAQ's, we would have to ask whether we settle for a custom rom of wm5 ... ..
even so, do not give up ..

ASakovoy said:
Hi, I saw the link, and promise the latest version of Windows Mobile to put ... but it is an ambiguous answer, because if it does not support anything more than wm5.1, they charge you 27 euros for walking the ipaq (for nothing )....
Click to expand...
Click to collapse
They have a WM5 ROM, but it means that iPAQ update files for rx5000 Series does exist and if I could get those files - most likely I would be able to make a WM6.1 or WM6.5.x ROM.

Hey now Spiaatie - if you're taking requests...
I've been trying to find someone who can cook a ROM for iPAQ rx3115 (straight Pocket PC - no phone). Samsung sc32440 CPU @ 300 mhz. 64MB RAM 32MB ROM...
I have the last update of WM 2003.
http://www.mediafire.com/file/i6k0935chhkgzlh/iPAQ rx3115 ROM 1_01_11.exe
There are a lot of rx3115 owners dying to upgrade. If you cooked a WM 5 of 6.1 ROm for that device I would make sure to spread your fame both far and wide.

RumoredNow said:
I've been trying to find someone who can cook a ROM for iPAQ rx3115 (straight Pocket PC - no phone). Samsung sc32440 CPU @ 300 mhz. 64MB RAM 32MB ROM...
Click to expand...
Click to collapse
Sorry to say, but it's not possible. WM5 needs at least 64MB ROM. And there is no WM5 kernel for iPAQ rx3115 - only HP can make it. Windows CE4 and CE5 have completely different memory managament.

Spiaatie said:
Sorry to say, but it's not possible. WM5 needs at least 64MB ROM. And there is no WM5 kernel for iPAQ rx3115 - only HP can make it. Windows CE4 and CE5 have completely different memory managament.
Click to expand...
Click to collapse
Hello, you can do with a ipaq rx 5935 (5900series)?
System ROM size: 2048Mb
System RAM Size: 64 Mb
Flash Rom: yes
ROM version: 1.00.02
windows mobile 5.1, latest updates:
http://h20000.www2.hp.com/bizsuppor...Id=3263043&swLang=35&taskId=135&swEnvOID=2067

ASakovoy said:
hello, you can do with a ipaq rx 5935 (5900series)?
System ROM size: 2048Mb
System RAM Size: 64 Mb
Flash Rom: if
ROM version: 1.00.02
5.1 m windows latest updates:
Click to expand...
Click to collapse
Theoritically I could make a new ROM, but I still need shipped ROM.
Now I can't do anything, because there is NO ROM file for rx5900 Series iPAQs.

Spiaatie said:
Theoritically I could make a new ROM, but I still need shipped ROM.
Now I can't do anything, because there is NO ROM file for rx5900 Series iPAQs.
Click to expand...
Click to collapse
If it is true .... it is almost impossible to find ... unless you could copy mine own ...

ASakovoy said:
If it is true .... it is almost impossible to find ... unless you could copy mine own ...
Click to expand...
Click to collapse
There is no use of your ROM, as update loader software also is needed.

ASakovoy said:
If it is true .... it is almost impossible to find ... unless you could copy mine own ...
Click to expand...
Click to collapse
anyway, thanks for the tips. and your time

Downgrade B160 Firmware P8 Lite

Hi guys,
actually I have the Version ALE-L21C55B160 installed on my device. I would like to downgrade to another version because this version is branded (TIM Italy).
I downloaded the Stock firmware from this thread, copied it to the sd card (in the dload folder) and tried to upgrade/downgrade the firmware. I get immediately the Error "Software install failed!".
I tried via the EMUI Upgrader and via Power+VolumeUp+VolumeDown Key but without success.
Somebody has a suggestion? I don't want to unlock the bootloader or root the phone (company phone).
Thx in advanced!
Speed

I would unlock bootloader and use fastboot, its the only way i know..
But im not Einstein so maybe there is a way that i dont know about..

If the process mentioned above, not working there's nothing else you could try.
Are you sure, that the downloaded ROM is correct and not corrupted?

Sp33d_ said:
Hi guys,
actually I have the Version ALE-L21C55B160 installed on my device. I would like to downgrade to another version because this version is branded (TIM Italy).
I downloaded the Stock firmware from this thread, copied it to the sd card (in the dload folder) and tried to upgrade/downgrade the firmware. I get immediately the Error "Software install failed!".
I tried via the EMUI Upgrader and via Power+VolumeUp+VolumeDown Key but without success.
Somebody has a suggestion? I don't want to unlock the bootloader or root the phone (company phone).
Thx in advanced!
Speed
Click to expand...
Click to collapse
you made this answer in many forum and many language, i asked you but you don't read....

daviddosa said:
Are you sure, that the downloaded ROM is correct and not corrupted?
Click to expand...
Click to collapse
Yes, I have tried a lot of different versions from Europe and I tried it also to flash the Rom on a older phone (same model but older branded firmare) and there it worked without problems. It seems that i cannot downgrade to a older firmware version.
myabc said:
you made this answer in many forum and many language, i asked you but you don't read....
Click to expand...
Click to collapse
I made this question only in this forum and only in this language. I don't know what are you talking about...
I have to do the unbranding on over 60 phones, so unlocking the bootloader is a bit difficult...

I've accidentally left the dload folder in my sdcard, and booted into the the Huawei Recovery which automatically started flashing the firmware. At 99% stopped, and said it's failed, but after restarting the phone, it was working and with the proper build installed.
But, if the dload method not working, nothing you can do without unlocking the bootloader for each phone, and installing each and every firmware by hand.
Yeah, it'll take a few hours to do it...

Sp33d_ said:
Yes, I have tried a lot of different versions from Europe and I tried it also to flash the Rom on a older phone (same model but older branded firmare) and there it worked without problems. It seems that i cannot downgrade to a older firmware version.
I made this question only in this forum and only in this language. I don't know what are you talking about...
I have to do the unbranding on over 60 phones, so unlocking the bootloader is a bit difficult...
Click to expand...
Click to collapse
Hi, did you downgraded the b160 brand tim to b132?
I need to do same work..

fxhappy said:
Hi, did you downgraded the b160 brand tim to b132?
Click to expand...
Click to collapse
Nope, unfortunately not

Sp33d_ said:
Nope, unfortunately not
Click to expand...
Click to collapse
hi,
I find information on other italian forum,
scaricare il firmware B133 EUROPA SINGLE SIM
2- inserire il file dload nella sd card - riavviare il telefono in recovery
3- partirà l'installazione e darà esito negativo con l'errore " installation failed" (fate finta di niente e cliccate su reboot)
4- una volta riavviato spegnete di nuovo il telefono e fate un hard reset dalla recovery
5- fatto l'hard reset vi troverete con un tema classico ed icone differenti alla precedente versione ed andando in info telefono comparirà come numero di serie BALONG
6- scaricare il firmware B049 (contenente il file dload e il file vendor)
7- prendete il file vendor e rinominatelo in "dload" ed inseritelo nella sd card del telefono
8- riavviate in recovery e vedrete che partirà l'installazione del vendor(dura poco più di 1 minuto)
9- finita l'installazione a reboot terminato avrete il vostro telefono sbrandizzato con il firmware B133
P.S : il bootloader del telefono deve essere sbloccato - seguite la guida sul forum se non sapete come fare
try and let me to know if it work,
i don't know how to unlock bootloader