Related
Every time when I reset my BA, when the BA starts the signal is lost. If I open the Phone Settings/Network and I find for network a error message is showed. I need to do a hard reset to the signal back. I´m using WM6. If I upgrade my radio to the last version find here (1.15) this problem will be solved? I´m in Brazil using TIM. Tks,
you can try and tell us
which radio version do you use?
I´m using now 1.13.
I´ll try install radio 1.15 .
Tks,
Same problem...
Hi Daniel.. I have the same problem.
My radio version is 1.06 (yes...it's older...).
I live in Brazil too...
Sim, tambem sou brasileiro, meu chip é da claro.
Até agora tá um porre pra reconhecer o chip.
Migrei pra wm6 ontem e vou tentar a versao 1.50.
Qualquer coisa, é só falar, de repente podemos trocar umas figurinhas.
Abraço.
Rodrigo Pelosini
[email protected]
SX66 with the same problems in BRAZIL
I'm having this same problem in Brazil.
One interesting thing I found out is that when my SX66 is powered via cradle and I soft-reset it, it finds the TIM (1800 mhz) signal.
If I soft-reset using only the battery, it sometimes finds the signal, but most of the time it finds the VIVO (850 mhz) signal only.
I had the same problem with the WM5, so I was using WM3.
Regards.
I'm using Radio V.1.12
So far so good
U can Try with this is Radio
Hi Brazilian friends,
After update the radio version to 1.15 the signal was better than with 1.12 version, but sometimes still have the problem that lost signal and only with a Hard Reset come back to work.
HELP please!!
I have a problem... a big problem.
My rom radio version is 1.06, yesterday I try update my radio rom to 1.15 and have problem... Don´t make apply this update.
HELP me, guys!!
Rodrigo Pelosini
Brazil - São Paulo - Operator GSM: CLARO
Qtek 9090 (Blue Angel) - WM6
ROM RADIO 1.06
[email protected]
Rodrigo,
Add me on MSN .... to I help you.
ajie said:
I'm using Radio V.1.12
So far so good
U can Try with this is Radio
Click to expand...
Click to collapse
Are u in Brazil too? Wich carrier do you use (frequency)?
didibrazil said:
Are u in Brazil too? Wich carrier do you use (frequency)?
Click to expand...
Click to collapse
I'm Live in Indonesia Bro
using 1.15 for long time now... but the problem is there...
sometimes the phone goes into searching.... mode and does not connect back to the network.
earlier switching off/on radio worked fine..
but with the comm manager ... i can switch off phone but can not turn it back...
have to perform a soft reset...
I am having the same problem too. Using 1.12 radio. Tried 1.13 and 1.15, there are bad.
Few times a day I still have the problem where phone cannot wake up to receive phone calls or failed to make outgoing calls.
I believe it is not the signal issue, something to do with phone apps to constantly wake up for calls.
Hi Brazilians members..
I'm brazilian too.. and i upgraded my BA to WM6 at last week.. my version of radio is 1.13.00 and my operator is Oi, and i'm not passing for this problem.
If I can help you... SCREAAAMM... rs,rs,
Bye
where can i faind original wm5 or wm6 for HTC Trinity ?
my Trinity is Orange brandet SPV M700, the phone is unlocked.
TheHater said:
where can i faind original wm5 or wm6 for HTC Trinity ?
my Trinity is Orange brandet SPV M700, the phone is unlocked.
Click to expand...
Click to collapse
You should start reading the Wiki and searching the threads.
http://wiki.xda-developers.com/index.php?pagename=Trinity_Upgrades
http://wiki.xda-developers.com/index.php?pagename=Trinity_DumpedRoms
http://forum.xda-developers.com/showpost.php?p=1887762&postcount=65
multumesc pentru linkuri.
am ajuns la conluzia ca cel mai bun rom e ala cu care vine telefonul din fabrica.am instalat wm5 original htc si merge telefonul super in comparatie cu orice wm6 care l-am incercat de la diferiti cookeri.
daca ai vreo sugestie in legatura cu ce rom ar trebui sa incerc e bine venita.
thx for the links
i come to the conclusion that the best rom is the one that comes with the device from the manufacter.i instaled wm5 from htc an the phone works great in compare with ani other mw6 rom that i tryed from diferent rom cookers.
if you have any sugestion in what rom should i try it is welkomed.
TheHater said:
multumesc pentru linkuri.
am ajuns la conluzia ca cel mai bun rom e ala cu care vine telefonul din fabrica.am instalat wm5 original htc si merge telefonul super in comparatie cu orice wm6 care l-am incercat de la diferiti cookeri.
daca ai vreo sugestie in legatura cu ce rom ar trebui sa incerc e bine venita.
thx for the links
i come to the conclusion that the best rom is the one that comes with the device from the manufacter.i instaled wm5 from htc an the phone works great in compare with ani other mw6 rom that i tryed from diferent rom cookers.
if you have any sugestion in what rom should i try it is welkomed.
Click to expand...
Click to collapse
I can not recommend any ROM to you, it would be against my principle - flaming noobs asking about "which ROM?", "what ROM version?" and so on.
I can only tell you that fastest ROMs are the ones based on WM6.1.
The rest is up to your needs.
ya thx for the answer.
wm5 much faster
tnyynt said:
I can not recommend any ROM to you, it would be against my principle - flaming noobs asking about "which ROM?", "what ROM version?" and so on.
I can only tell you that fastest ROMs are the ones based on WM6.1.
The rest is up to your needs.
Click to expand...
Click to collapse
Hey tyynt
As the saying goes.....you can lead a horse to water...........
hey make funny remarcs on somebody else.
it just my opinion if you don't like it then ...
TheHater said:
hey make funny remarcs on somebody else.
it just my opinion if you don't like it then ...
Click to expand...
Click to collapse
He was not mocking, it's just a saying, I was trying to show you "the way". But hey, it's a free world, everyone is entitled to their opinions, I know I have tried all WWE ROMs from WM5 to WM6.1. Have you?
i did not tryed all off them.i trayed 15 and none of them was good.
i tested various apss on wm5 and wm6 and i did not see ani diference in the performance off the apss.now i wana try the official wm6 from dobod to see how is it.
the batery consumtion in wm5 is much lower than in wm6,probapli because it uses less ram.
maybee i do no how tu configure it.
Hello,
I've just updated my polaris radio to Murata PPAS 1.58.21.23 two day ago, after that, i have strange problem, sometimes sound is totaly mute and only soft reset helps. Could it be because of Murata PPAS rom upgrade? No problems before with original radio rom.
Thanx. VicC
switched back to original Radio ROM and problem is almost gone... it happens not so often now... ;/ i hate this prob ;[
Problem so zvukom
Zdravim, tiez mam ten isty problem so zvukom, flashoval som Murata Radio a pri telefonovani nepocujem absolutne nic, vsimol som si ze sa to stava, ked som spustil a vypol TomTom-a, ako keby to bolo zavisle na prepnuti, teda spracovavani aj GSM signalu spolu s GPS.
Popdarilo sa Ti to nejakym sposobom vyriesit, teda okrem vratenia Origin. radia? Pripadne nasiel si aspon tak dobru alternativu ako Murata radio?
Zosenko
kaleyn
Junior Member Join Date: Apr 2008
--------------------------------------------------------------------------------
still nobody has solved my problem...
plz any senior member .. u must have a solution....
give me that...
Even with radio upgrades it stops automatically saying that
Error 270: Update Error
The image file is corrupted please check your update utility....
Quote:
Originally Posted by kaleyn
use USPL to get rid of the CID....count goes up to 100% screen shows black, blue green, then pops to white. I need to do a soft reset to get it running again.
Then i use ROM Update Utility to update my p3300....and it still keeps hanging on 3%....damn. i get mad...!! Have read almost all here online...no virusscanner, no firewall....I use Vista.
i even tried without memory card and phone card....and nothing seems to work.......
Rom version: 3.7.707.1 WWE
Rom date: 6/21/07
Radio Version: 02.69.90
Protocol version: 4.1.13.30
ExtROM Version: 3.6.707.101
please help
Are u using Win Vista or Xp?
I Know,
But i think phone is still CID locked?? or ROM file is to big. Artemis is flashable with VISTA
--
amerr said:
Hi Kaleyn,
I was having the same problem on xp with sp3, i was getting error 270 and it was driving me mental. remove the memory card and then use uspl to remove CID protection, let it go to 100%, you said your screen then goes white, on my Artemis, I was once shown the linux duck but for the most part the screen goes black. at this point it loses sync with the pc, the green icon goes white on the pc showing its no longer synched, ignore this and do not reset your phone. Instead close down uspl and open the rom update utility. your phone is still in sync with the pc but by doing a reset it messes it up. trust me it works, i have flashed my phone loadsa times now without any problems.
So when USPL is at 100% and your screen goes white, DO NOT TOUCH YOUR PHONE, just close USPL and open RUU and update and then like magic it should have uploaded your new rom and you'll be a happy bunny
Click to expand...
Click to collapse
Dude I did the same but I am getting same error I'm ****ed !!
I also have the same problem.
Already took the SIM card and the microSD.
I did u USPL, HARDSPL, etc etc. ..
Already tried with Vista and XP
Someone has discovered the origin of this problem?
Error 270...
--------------------------------------------------------------------
Eu também tenho o mesmo problema.
Já tirei o cartão SIM, bem como o microSD.
Já fiz u USPL, HARDSPL, etc etc..
Já experimentei com o Vista e com o XP
Alguém já descobriu a origem deste problema?
Solução para o Error 270
Finally I got it.
For those who have not yet managed to do the following:
1 USPL;
2 when finishing the USPL, let the screen stay in black / white and wait a while to restart the PDA. Is not seen, but the PDA is connected;
3 without touching the PDA or disconnect the USB cable, run your favorite ROM.
RC
--------------------------------------------
Finalmente já consegui.
Para quem ainda não conseguiu tem de fazer o seguinte:
1º USPL;
2º quando acabar o USPL, deixar que o ecra fique em preto/branco e aguardar um tempo que o PDA reinicie. Não se vê, mas o PDA está ligado;
3º sem tocar no PDA nem desligar o cabo USB, correr a vossa ROM preferida.
RC
RCabrita said:
Finally I got it.
For those who have not yet managed to do the following:
1 USPL;
2 when finishing the USPL, let the screen stay in black / white and wait a while to restart the PDA. Is not seen, but the PDA is connected;
3 without touching the PDA or disconnect the USB cable, run your favorite ROM.
RC
--------------------------------------------
Finalmente já consegui.
Para quem ainda não conseguiu tem de fazer o seguinte:
1º USPL;
2º quando acabar o USPL, deixar que o ecra fique em preto/branco e aguardar um tempo que o PDA reinicie. Não se vê, mas o PDA está ligado;
3º sem tocar no PDA nem desligar o cabo USB, correr a vossa ROM preferida.
RC
Click to expand...
Click to collapse
That is written in the USPL manual...
Before you try anything just read the manuals first... They are there to help, not just to say what a wonderfull program it is.
Cheers
Zecanilis said:
That is written in the USPL manual...
Before you try anything just read the manuals first... They are there to help, not just to say what a wonderfull program it is.
Cheers
Click to expand...
Click to collapse
Yes, you are right!
I had done almost all of USPL, but did not expect the time. Maybe not this time to restart the PDA.
Thanks and I apologize.
RC
Jeez can this be in a clearer thread, Amerr nailed my problem but it took me 4 hrs to find this solution. Thanks a
hey guyes, tried everything .... stilll not doin
rik.vanoijen said:
Jeez can this be in a clearer thread, Amerr nailed my problem but it took me 4 hrs to find this solution. Thanks a
Click to expand...
Click to collapse
will u plz quote the solution u found
kaleyn said:
will u plz quote the solution u found
Click to expand...
Click to collapse
what the hell still no sound solution..
i never expected..
this is crab ..
Today my internet connection is a bit fast, so i only took 2 sec to find your answer.
http://forum.xda-developers.com/showpost.php?p=1312109&postcount=118
Thanks for all
thanks Guy, you are the best, i follow your steps and i get it easy. thank you. sore about my english.
Hello guys!
I own a qTek S100 that was once a TMN cell phone, but now is unlocked and is using a Vodafone Portugal sim card. As you know, the phone is equipped with the Windows Mobile 2003, and its version is:
4.21.1088 (Build 15045.2.6.0)
The ROM of the device is:
1.12.00 WWE
What do you, experts, advise, to improve this cell phone, and make it even better than it already is?
Apps, ROMs, and everything you know better than I do, are welcome!!!
Thank you in advance!
MGuedes said:
Hello guys!
I own a qTek S100 that was once a TMN cell phone, but now is unlocked and is using a Vodafone Portugal sim card. As you know, the phone is equipped with the Windows Mobile 2003, and its version is:
4.21.1088 (Build 15045.2.6.0)
The ROM of the device is:
1.12.00 WWE
What do you, experts, advise, to improve this cell phone, and make it even better than it already is?
Apps, ROMs, and everything you know better than I do, are welcome!!!
Thank you in advance!
Click to expand...
Click to collapse
You can try Cotulla's Wm6.1 ROMS
and you can also trash that racist vodafone scumbags and pick a real SP
Thanks for your answer, Riki! I never thought about that connection! Quite interesting!
Anyway, I'm a bit afraid of trying Cotulla's ROM because perhaps it wouldn't work, and then I'd lose my cell phone.. Do you think it's safe to try it? Isn't there too much of a risk?
MGuedes said:
Thanks for your answer, Riki! I never thought about that connection! Quite interesting!
Anyway, I'm a bit afraid of trying Cotulla's ROM because perhaps it wouldn't work, and then I'd lose my cell phone.. Do you think it's safe to try it? Isn't there too much of a risk?
Click to expand...
Click to collapse
I guess, you just live to follow and understand instructions given by Cotulla to succeed to flash ROMS Wm6.1
Well, thanks.
Lately, my qTek is facing a problem. I don't have any call sounds. I can't hear people talking to me, and neither can I hear the call tones when I'm calling someone. All the other sounds are audible.
MGuedes said:
Well, thanks.
Lately, my qTek is facing a problem. I don't have any call sounds. I can't hear people talking to me, and neither can I hear the call tones when I'm calling someone. All the other sounds are audible.
Click to expand...
Click to collapse
what radio version do you use on your device today ??
Sorry? I don't understand what you're saying..
MGuedes said:
Sorry? I don't understand what you're saying..
Click to expand...
Click to collapse
I mean, what version of radio carriers ( such as type of 1.12.00 and others) and try to upgrade the radio! maybe it happened ( call vote, can not hear people talking, did not hear the tone of the call ) because the radio version that is not appropriate...
I have the 1.12.00 version. Is there any higher than that?
MGuedes said:
I have the 1.12.00 version. Is there any higher than that?
Click to expand...
Click to collapse
You can get all the radio version for htc magician at http://forum.xda-developers.com/showthread.php?t=705702
MGuedes said:
Well, thanks.
Lately, my qTek is facing a problem. I don't have any call sounds. I can't hear people talking to me, and neither can I hear the call tones when I'm calling someone. All the other sounds are audible.
Click to expand...
Click to collapse
I have that problem too on my 2nd hand Magician, I've bought it that way because I'm using this a test device.
------------
Eu comprei o meu S100 já com esse problema, se for o mesmo problema do meu então deve ser a coluna interna do telefone avariada. Este telemovel tem duas colunas de som, uma normal por exemplo que é utilizada pelo Windows media player, e a outra que é utilizada pelo telefone. Tenta o seguinte, quando fizeres ou receberes uma chamada, coloca-a em alta-voz (pressiona longamente o botao verde para atenderes em alta-voz) e confirma se assim já consegues ouvir. Se conseguires, é a coluna interna do telefone que avariou. Há um tipo no Algarve que arranja isso, mas cobra ainda um pouco carote, e tens de enviar pelo correio. Eu não enviei porque o meu magician já tem montes de probs e eu uso isto para outras coisas que não telefonar Um abraço
------------
About the radio version, I recommend you continue to use 1.12.00, I have it instead of 1.13 because Cotulla ROM's only work on 1.12 and since I'm always changing between 6.1 and wm2003, I always leave it with 1.12
iRiKi said:
I have that problem too on my 2nd hand Magician, I've bought it that way because I'm using this a test device.
------------
Eu comprei o meu S100 já com esse problema, se for o mesmo problema do meu então deve ser a coluna interna do telefone avariada. Este telemovel tem duas colunas de som, uma normal por exemplo que é utilizada pelo Windows media player, e a outra que é utilizada pelo telefone. Tenta o seguinte, quando fizeres ou receberes uma chamada, coloca-a em alta-voz (pressiona longamente o botao verde para atenderes em alta-voz) e confirma se assim já consegues ouvir. Se conseguires, é a coluna interna do telefone que avariou. Há um tipo no Algarve que arranja isso, mas cobra ainda um pouco carote, e tens de enviar pelo correio. Eu não enviei porque o meu magician já tem montes de probs e eu uso isto para outras coisas que não telefonar Um abraço
------------
About the radio version, I recommend you continue to use 1.12.00, I have it instead of 1.13 because Cotulla ROM's only work on 1.12 and since I'm always changing between 6.1 and wm2003, I always leave it with 1.12
Click to expand...
Click to collapse
Thanks.. Since I hear all the other noises, it's probably the call-speaker that is malfunctioning.. Anyway, since the last time I came here, that speaker came back to life and now is dead again, so, I just carry a pair of headphones on my pocket, that I use whenever I want to call or answer people.. It's a bit annoying because the wires keep tangling up, but has its advantages..
If you flash Cotulla's ROMs, you can then return to WM2003?
And besides those ROMs, what more do you advise me to do?
I have at home one of those Samsung Vodafone 360 M1, which was offered to me by a magazine to which I collaborate. But that SO (LiMo) is buggy as hell, so, it's now in my desk, on my room, with no use.. And with 90% of my contacts, because I couldn't find a clever way to pass them to the qTek again..
MGuedes said:
Thanks.. Since I hear all the other noises, it's probably the call-speaker that is malfunctioning.. Anyway, since the last time I came here, that speaker came back to life and now is dead again, so, I just carry a pair of headphones on my pocket, that I use whenever I want to call or answer people.. It's a bit annoying because the wires keep tangling up, but has its advantages..
If you flash Cotulla's ROMs, you can then return to WM2003?
And besides those ROMs, what more do you advise me to do?
I have at home one of those Samsung Vodafone 360 M1, which was offered to me by a magazine to which I collaborate. But that SO (LiMo) is buggy as hell, so, it's now in my desk, on my room, with no use.. And with 90% of my contacts, because I couldn't find a clever way to pass them to the qTek again..
Click to expand...
Click to collapse
Speaker back to life!
Another doubt. My cell phone now periodically shuts down my calls, at 8 minutes.. What can I do? How can I solve this?
My qTek is now doing Hard Resets every day, with no apparent reason. What do you think it's causing this?
Sorry about the late reply, but Android is now the king! anyways that also happens to me, it's because of a red switch located on the right side of the phone, when you remove the battery.my solution was to put a piece of paper so it doesn't hard reset.good luck!
Sent from my Boston using xda app-developers app
iRiKi said:
Sorry about the late reply, but Android is now the king! anyways that also happens to me, it's because of a red switch located on the right side of the phone, when you remove the battery.my solution was to put a piece of paper so it doesn't hard reset.good luck!
Sent from my Boston using xda app-developers app
Click to expand...
Click to collapse
Oh.. Thanks anyway!
MGuedes said:
Oh.. Thanks anyway!
Click to expand...
Click to collapse
There's a guy in Algarve that knows how to fix this old phones.. if you want I can give you his contact, just pm me.
MGuedes said:
Well, thanks.
Lately, my qTek is facing a problem. I don't have any call sounds. I can't hear people talking to me, and neither can I hear the call tones when I'm calling someone. All the other sounds are audible.
Click to expand...
Click to collapse
I had this same problem years ago. The device has two speakers. One at the back for the multimedia purposes and the other one at the top front for hearing calls. The front speaker got damaged and i had to get it replaced at a local shop. Then it worked like a charm!
And that ROM works.