So my friend messed up his zuk z2 plus by flashing zui 4.0 and gave it to me to fix it
On boot it showed encryption unsuccessfull
I tried booting in the recovery and fastboot but it couldn't boot
The device was f**ked up
So i did some research and came across a thread from [email protected] about booting in EDL mode
EDL is emergency download mode
Now to boot into EDL you should power off the device
hold volume up button for 15 second
After 15 second cilck the power button (instant click like you do for going on lock screen 0.5sec) (don't leave volume key)
Now press and hold power button and instantly insert USB cable (insert during device vibrates)
If ( u did it right ){
the zuk logo should blink and disappear and you will be in EDL mode
}else{
your device will boot normally
}
Now you can flash stock rom using mi flash tool
You will need to download qpst version of ROM for flashing
You need to install right drivers for flashing via mi flash tool
I tried using QPST/QFIL but it gave some error
I hope this article helpful
Video will be out soon on : https://youtube.com/rohanparab459
Related
have sgs 5 g900f can't continue download mode and the os is doesn't boots up ,becuase of efs clear,
before i did the efs clear i was able to boot download mode only by adb reboot bootloader when the old os was able to boot. (in that command i boot to download without warning message so no need to hit vol up to continue)
now after i did efs clear i lost the working os, so now only button combination working and i can see the download mode warning but can't pass to the continue!
vol buttons are working when using it in the os, just kind of locked in download mode!, very weird!, any solution?
AGAIN, ALSO BEFORE I LOST THE WORKING OS I NEVER ABLE TO HIT CONTINUE WITH VOL UP IN DOWNLOAD MODE!
i checked buttons maybe they are stuck - but everything is good
I can see the download mode green warning message
just can't continue
Hello everyone,
I recently bought a Zuk z1 and I tried to install TWRP recovery with the TWRP manager.But when i tried Access the recovery mode my phone stuck on a dark screen..I turned it off by pressing the power off button.After that my phone boot without any problem, but now when I'm trying access the recovery mode my phone will reboot in normal mode...Any thoughts???
Sorry for any grammar mistake...btw i'm greek
Backup your data and try flashing via all in one tool kit. Worked for me.
Is there anything i can do without pc???
Thank you all for your "help", I'll figure it out myself
please make use of adb commands using pc itself .
it is the safest method of flashing recovery and unlocking boot loader.
and one information ,In ZUK Z1 to go to recovery from power off mode is by pressing both volume up and down + power button for 10 odd seconds
I did try to use a pc and the tool all in one ( http://forum.xda-developers.com/zuk-z1/orig-development/tool-toolzukz1eng0-0-3-mauronofrio-t3332563 ) but my pc doesn't seem too recognize my phone when i boot it at the bootloader, I installed the drivers from the tool all in one ( the lenovo usb drivers) but still nothing. Im using win7 starter 32 bit.
Hi
I was trying to unlock bootloader using spflash. While doing so i have wrote uboot ro wrong memory address by mistake.
Now my phone is hung at homescreen and keep on rebooting.
Any suggestions?
1. Reboot to stock recovery- Press and hold Vol+, Vol- and Power button simultaneously. Release power button when you feel a vibration, and release Vol+ and Vol- buttons after screen lights up( When you see Lenovo Logo).
2. Select clear data from the recovery.
3. Reboot you device.
If that doesn't work, you need to flash stock rom to you device.
My lenovo k4 note is not turning on after flashing With SP Flash tool
yesterday i flashed my Lenovo k4 note with SP Flash Tool with given files , after flashing the phone is not turning ON . Please suggest the next step
Thanks in Advance
I tried to update my wife's P9 lite to Nougat manually and initially succeeded in some way. The version I installed via the dload install method turned out to be some sort of Bluetooth disabled demo firmware (I can't remember the name of it).
I then tried to downgrade back to MM 6.0/EMUI 4.1 and now have a bricked phone. I can't actually turn it off!
Hard reset options do nothing.
Here is the current situation:
The phone is always on - the Huawei logo is displayed with 'powered by Google' at the foot of the screen.
Holding down the power button returns the phone to the same screen after a vibration and a brief moment of blackness.
Holding all three buttons results in a double vibration then back to the same screen.
Power and down vol leads to black screen, vibrate, back to logo screen.
Power and vol up is the same as vol down result.
I'm out of ideas. Nothing online mirrors these faults. I'm ashamed to admit defeat but it is as dead as I've seen any handset. I can't believe it won't even power down. I'm in the doghouse here. Wife is not happy!
Download any update eg b161, download trwp and connect your phone to PC then press power + vol down. U should land to fastboot then open adb/fastboot and type fastboot oem unlock "unlock code" then enter if u get unlocked then flash trwp by fastboot flash recovery trwp.img after that go to trwp and flash the update.zip u downloaded. Then reboot
elliotn said:
Download any update eg b161, download trwp and connect your phone to PC then press power + vol down. U should land to fastboot then open adb/fastboot and type fastboot oem unlock "unlock code" then enter if u get unlocked then flash trwp by fastboot flash recovery trwp.img after that go to trwp and flash the update.zip u downloaded. Then reboot
Click to expand...
Click to collapse
Thank you but it goes straight back to the logo screen when I try this.
Hello All
I have problem with my Axon7 G. I had 8.00 version installed and tried to make a system write option with using a method mentioned in
Official (Beta) Android 8.0.0 V1.30B01 EU Version by NFound thread. I flashed zip mentioned in this tread -ZTE_A7_UniversalBootStack.
Then restart devices and...whats happened....soft (or hard) bricked my phone!!!!!
1. After restart i had a standard warning about unlocked bootloader with yellow fonts . After 5 sec yellow fonts changed into red and wrote my device is corrupt...
2 using vol down i can enter into bootloader mode - then i can choose option like fastboot, recovery,restart and power off.
- pressing recovery and restrt , phone restart and again boot into bootloader mode with option above (cant get into twrp or stock recovery mode)
-pressing fastboot i can enter into this mode .
3 . Use fastboot mode to flash recovery and boot ( fastboot flash recovery recovery.img and fastboot flash boot boot.img)
everything seems ok but...nothing changed , i cant boot into recovery -twrp or stock. Still go back after restart to bootloader menu
4. edl mode.....i can`t enter . Use vol + and vol- and power button then after 3 sec phone went black screen with red light upper left. Applications cant recognize phone in this mode...
somene can help me ???
I also get the warning but I can just continue with the boot. I can't access recovery however. Don't know hot to fix that.
Ok I did this. A7 is working )
I flashed this via fastboot flash file: A2017G_B06_NOUGAT_STOCK_FASTBOOT_EDL.zip then i went into twrp and everything works
Antistar said:
Ok I did this. A7 is working )
I flashed this via fastboot flash file: A2017G_B06_NOUGAT_STOCK_FASTBOOT_EDL.zip then i went into twrp and everything works
Click to expand...
Click to collapse
did you manage to get the error message away?
I got it recently after installing LOS 15.1, but for me everything works fine .
I'm just afraid if the device randomly reboots at night my alarm won't go off in the morning since it's the device is shutting itself down after the 30 second warning.
If you've fixed this can you please detail me through the steps.