What Have I done.... Soft Bricked A7G - ZTE Axon 7 Questions & Answers

Hello All
I have problem with my Axon7 G. I had 8.00 version installed and tried to make a system write option with using a method mentioned in
Official (Beta) Android 8.0.0 V1.30B01 EU Version by NFound thread. I flashed zip mentioned in this tread -ZTE_A7_UniversalBootStack.
Then restart devices and...whats happened....soft (or hard) bricked my phone!!!!!
1. After restart i had a standard warning about unlocked bootloader with yellow fonts . After 5 sec yellow fonts changed into red and wrote my device is corrupt...
2 using vol down i can enter into bootloader mode - then i can choose option like fastboot, recovery,restart and power off.
- pressing recovery and restrt , phone restart and again boot into bootloader mode with option above (cant get into twrp or stock recovery mode)
-pressing fastboot i can enter into this mode .
3 . Use fastboot mode to flash recovery and boot ( fastboot flash recovery recovery.img and fastboot flash boot boot.img)
everything seems ok but...nothing changed , i cant boot into recovery -twrp or stock. Still go back after restart to bootloader menu
4. edl mode.....i can`t enter . Use vol + and vol- and power button then after 3 sec phone went black screen with red light upper left. Applications cant recognize phone in this mode...
somene can help me ???

I also get the warning but I can just continue with the boot. I can't access recovery however. Don't know hot to fix that.

Ok I did this. A7 is working )
I flashed this via fastboot flash file: A2017G_B06_NOUGAT_STOCK_FASTBOOT_EDL.zip then i went into twrp and everything works

Antistar said:
Ok I did this. A7 is working )
I flashed this via fastboot flash file: A2017G_B06_NOUGAT_STOCK_FASTBOOT_EDL.zip then i went into twrp and everything works
Click to expand...
Click to collapse
did you manage to get the error message away?
I got it recently after installing LOS 15.1, but for me everything works fine .
I'm just afraid if the device randomly reboots at night my alarm won't go off in the morning since it's the device is shutting itself down after the 30 second warning.
If you've fixed this can you please detail me through the steps.

Related

unaccessible fastboot / recovery

Hi,
Currently on 2.22.40.54 firmware, and successfully rooted it, but with a wrong root method. Therefore I lost camera access. Followed this guide , and flashed the 2.22.40.30 fastboot / recovery (which was successful), but the firmware flash didnt proceed, (had to restart), which resulted in not able to access fastboot / recovery. Tried flashing a new recovery tru xFSTK, but encountered the driver error and the ASUS Flash Tool gives me "serial number not found" error... I usually get the USB logo on start up, but sometimes I get a normal boot (which is nice).
Now, what is the best way to recover my recovery / fastboot? I'm willing to try everything except bringing it to a Service Center.
turn off devices and then pres power buton and vol. up y will see asus logo then pres only vol. up .. if it will works please write there

a6000 shut down during MIUI flash, won't boot into recovery

Hey guys I was trying to flash MIUI 8 on my a6000 lenovo. Bear with me because I'm new to this so I might have screwed up.
Rooted and installed TWRP perfectly. Phone was running kitkat.
I then, through TWRP tried to flash MIUI 8 from http://forum.xda-developers.com/lenovo-a6000/development/rom-miui-7-lenovo-a6000-a6000-t3355692
After first swiping right to install the zip, i got an "error executing binary in zip" error. Wiped dalvik,etc. again and tried again and then I got a MD5 file not found "warning". It was not in red letters and after that message there was no progress bar or anything and the phone just stopped responding. I assumed it wasn't working and few minutes later took the battery out. After trying to boot again it would give me the "mi.com" boot screen (not the default lenovo I used to get) and won't boot into neither recovery nor normal mode. (for recovery boot I'm trying holding both volume buttons and the power button at the same time. perhaps that is different now?)
I'm guessing the flashing was going on and i interrupted it. How can I fix this?
Update: It boots into MIUI now however pretty much nothing works as expected. It wont even go into settings. Recovery still seems botched and i cant boot into it.
TLDR: Recovery broken cant boot into it. Can boot into MIUI with very limited capabilities. Cannot select USB debugging and "adb devices" won't find the phone. What can I do?
Alright nevermind guys I managed to fix it. for anyone wondering or having the same issue, i tried many things but what I think worked is this:
Turnt on my phone in fastboot mode (hold volume - and power button) , connected it to the computer and used command "fastboot flash recovery recovery.img" to flash the old TWRP i had on my computer. After that I managed to boot my phone in recovery mode and reflash the rom properly. The weird thing is, my phone could not be recognized by the computer and "adb devices" gave me nothing back so I thought using any fastboot command wouldn't work. Oddly, it did and it flashed TWRP back into my phone.

[FIXED] Lg G6 [H870] TWRP recovery problem

So i wanted to finally install custom ROM on my LG G6 H870, needed twrp... obv, followed all the instructions:
adb devices - showed my device all was good
2nd: adb reboot bootloader
3rd: fastboot flash recovery twrp.img
4th: fastboot reboot + holding volume down and power button, on logo released power button and pressed it down again, finally got to factory data reset 2 YES options and saw the Teamwin bootup logo, but then phone just booted up normally...
5th: Tried to open recovery once more, but then it did regular Data erease.
What could be wrong?
Razexay said:
So i wanted to finally install custom ROM on my LG G6 H870, needed twrp... obv, followed all the instructions:
adb devices - showed my device all was good
2nd: adb reboot bootloader
3rd: fastboot flash recovery twrp.img
4th: fastboot reboot + holding volume down and power button, on logo released power button and pressed it down again, finally got to factory data reset 2 YES options and saw the Teamwin bootup logo, but then phone just booted up normally...
5th: Tried to open recovery once more, but then it did regular Data erease.
What could be wrong?
Click to expand...
Click to collapse
Which TWRP did you flash ? Bootloader unlocked ?
Razexay said:
So i wanted to finally install custom ROM on my LG G6 H870, needed twrp... obv, followed all the instructions:
adb devices - showed my device all was good
2nd: adb reboot bootloader
3rd: fastboot flash recovery twrp.img
4th: fastboot reboot + holding volume down and power button, on logo released power button and pressed it down again, finally got to factory data reset 2 YES options and saw the Teamwin bootup logo, but then phone just booted up normally...
5th: Tried to open recovery once more, but then it did regular Data erease.
What could be wrong?
Click to expand...
Click to collapse
I had exactly same problem when I did this = only Teamwin bootup logo and then boot into android (I hope your bootloader is unlocked first).
Solution was you have to use TWRP 3.1.1-0 and u get into recovery. I tried more versions of TWRP (3.2.1-0 , 3.2.2-0 , 3.2.3-0) but ONLY 3.1.1-0 works and I dont know why.
Anyway I got another issue after because I didn't want to install root yet (first I wanted to backup).
An issue was I got into restarting loop by installing no-verity-opt-encrypt 6.0 which should be a solution for boot into android without losing TWRP (considering to one walkthrough I found).
I was lost for a while but I found a solution = install another boot.img (in my case I installed one dm-verity or dm-verity & forceencrypt zip file - btw what is a difference between them?).
Oh wow.. Well thanks, ill try your solution as soon as i get time. Bootloader is unlocked indeed, used latest twrp. I'll try 3.1.1-0.
@ Razexay
that happened to me also with Official TWRP take that from Eliminater74 that's where backup and encryption work with dm-verity & forceencrypt look here in the forum everything is well described
https://forum.xda-developers.com/lg-g6/development/twrp-t3828254

Hard brick

Hey their. So i jsut bought a one plus 6t and started playing around iwth it. I tried to get twrp and i got it but when i rebooted to os i had no wifi. So i download magisk zip and flashed it. After this i got stuck in bootloop and so i wne to twrp and wiped everything except system. Then i rebooted and got this message Qualcomm CrashDump Mode Attempted to kill init! exit code=0x0000000b do_exit. Then i freaked out and accidently wipes system too. Now i think i have a complete brick as adb still works but i cant transfer any file from pc to phone because theirs no system. Please help!!!
Never wipe system and vendor on A/B devices, literally, never.
Boot twrp and flash OOS or use msmdownloadtool.
What do you mean flash OOS. Like flash a fastboot file? And what version of msmdownloadtool should I get as their is no system. Should I get 10 cause that was my last system or it doesn't matter.
Update. I left twrp after flashing a stock image and now adb doesn't recognize my phone. When booting into recovery I go into the one plus recovery. Now I'm really screwed.
Okay now im really screwed. Whenever I boot with power up or power down I get sent to the bootlaoder page that says fastboot mode products name. I cant leave this page however. On the options above the information I click reboot recovery I get sent back to this page.
UPDATE. My phone is a literal brick now. It won't even turn on. I tried to force reboot it before and after it powered off it wont turn on. Its fully charged and when connecting to charger of holding buttons nothing happens. I have no warranty so Im hoping that someone can help me.
The "bootloader page" is fastboot and that's normal because there's no system to boot, you wiped that partition... and ADB only recognizes the phone when the boot process ends and ADB is enabled in the phone.
If you press vol up + down when you connect the usb cable the phone boots in EDL (Emergency Download Mode) mode, long press power + vol up to leave that state.
Now, download msmdownloadtool from here, extract the file, power off you phone, conect the usb cable to your pc, press vol up + down and connect the usb cable to the phone, open msmdownloadtool and flash the OS.
Edit: Read this thread for more detailed instructions.
What do you mean by flash the OS. The OS in the system or do I have to download one?
whenever I plug in my device it vibrates and then goes into the fastboot page. Also adb can detect it if I type in fastboot devices.
So i go the device to work and MsM worked until 4 seconds and then It said param preload for status of connection and status of last communication says device not match image
Try with the fastboot ROM.
When i downloaded another version of MsM it did not say no image match instead it stays at 4sec and says recording download time
Can you give me instructions on how to use the fastboot room? Like after i download it what should i do with it?
Download the rom, unpack it, boot your phone in fastboot (Power + vol up + vol down), connect the phone to your pc and execute the "flash-all.bat" file, and just wait.
um what is flash-all... How does it work what am i supposed to do.
what does unpack it mean?
Hey their im going to assume you meant to unzip the file and then open the file called falsh-all.bash. In that case when i do that i get this message "error: failed to load 'images.zip': No such file or directory
Press any key to exit..." In a CMD window

Cant install twrp in asus max pro m1

After all process i simply type laste sequence
Fastboot flash recovery recovery.img
My phone goes blank and in up corner it shows presa any button to restart and poof nothing happened
Now what to do
I have everything latest version
Android 10
Twrp
Magisk
Etc i need help pls
Vcruzzz said:
After all process i simply type laste sequence
Fastboot flash recovery recovery.img
My phone goes blank and in up corner it shows presa any button to restart and poof nothing happened
Now what to do
I have everything latest version
Android 10
Twrp
Magisk
Etc i need help pls
Click to expand...
Click to collapse
put the phone in charge and when it turns on press the keys to go into recovery mode then format the system and restart the phone
If your phone is properly rooted then install Flashify & use it to flash custom recovery but be aware & make backup prior flashing anything.

Categories

Resources