This has been an issue pretty much since installation a couple of years ago but I didn't user the car enough for it to bother me, but recently that had changed.
If I press next or prev physical button on the unit or user the steering wheel controls it will skip one song, play for a few seconds then skip again. Press back and it skips 2 back in the same way.
I just poweramp for my MP3 playback and if I press the on screen skip or next that works as expected.
Does anyone have any ideas?
Thanks
Related
So basically my one button headset would play/pause with a single tap, whilst two taps would automatically call the last person i spoke to. However I wanted to be able to skip to a different song with two presses.
Tried play/pause app to skip to next song....didnt work, tried HTCButton....didnt work.
However when i combined the two....it worked brilliantly, long press of my button still activates voice commander too. Tried this on 3 HD2's with diff headsets (my friends) and it worked, hopefully it will work on yours too.
Install Play/Pause 3.1 To Device Memory
Soft Reset
Open Up Play/Pause and pick AudioManager
At This Point When I Double Tapped My Button It Stopped Doing The Automatic Call....This Showed Play/Pause Did Something
Install HTCButton
DONT Soft Reset (For some reason the whole process failed everytime I Soft Resetted At This Point)
Open Up HTCButton, Pick Audio Controller Manager and change play/pause to Skip To Next Track Trying To Skip To Previous Doesnt Work
Exit, now go to audio player and a double tap of your single button headset SHOULD skip to next track. Goodluck
Edit: Single press should still be play & pause
i haven't had the luck you've had
the process worked before i re-flashed my device but no longer. i'll try again one last time...
I have the unit fully installed and working except for the "next" button on my steering wheel. The volume buttons work fine. I am able to map the button to "next track" but the music apps don't respond. I made sure the option to respond to hardware buttons is enabled in the app (dsub).
The same app on my phone will let me use the skip button on BT headphones.
I also remapped the button to "home" to verify its not a vehicle side problem and it worked fine. Hitting "next" on the steering wheel took me to the home screen. I still get the confirmation beep no matter what it is mapped to.
The button input is a varying resistance type if that matters. '09 lincoln towncar using the crux SWC adapter. Only 3 buttons; vol+, vol-, and next.
Any ideas? I was toying with remapping the button to some other function and setting a tasker event to skip track. End call? That should do nothing unless I'm on a call.
NHi Guys,
I have one problem with my NR3001 that sometime I press volume button from steering wheel, the volume bar continuously run until max/min even I have release the button.
Please see the video
https://youtu.be/f-AJsxNHj0s
I checked another unit in other car and found that if i keep pressing volume button then press any other button the sound bar will continue until end like this video
https://youtu.be/iQuNfWNXf-w
I am not sure my problem is because of steering wheel button of my car or because of NR3001. But from 2nd video surely NR3001 has a bug. Can somebody solve this issue?
Thanks very much
Could be an issue with the buttons or the clock spring. What year is your car? Does it use resistance buttons or canbus?
sinnedone said:
Could be an issue with the buttons or the clock spring. What year is your car? Does it use resistance buttons or canbus?
Click to expand...
Click to collapse
Car year is 2011, use resistance buttons no canbus
i see some cars have same issue, all no canbus and year 2010 - 2011
Maybe you know about this maybe you don't, I dunno!
So I stumbled upon this by accident, once and a while whenever I would grab my remote Kodi would pause. I wondered what was happening. Turns out (at least in Kodi) that if you double tap the volume bar on the Shield remote it will pause Kodi and another double tap will play
Ever since I got the shield I have turned off the volume control as it being extremely annoying when picking up the remote upside down the volume would always go crazy. So Mine is not acting as a volume control.
I have Junsun V1 head unit with LTE and canbox.
CAN settings is selected as "VW RZC".
Steering wheel buttons working good.
I have not connected KEY 1 and KEY 2. It`s not working. SWC is not working and that is ok, because CAN is working.
The problem is:
When I press volume UP on the wheel, volume down, next, prev - works good
When I press phone button on the steering wheel, the head unit open by default Bluetooth app.
So, when someone is calling to me, I can`t pick up the phone from the steering wheel, because Bluetooth app is opening.
Everything is coded in by CAN (VW RZC).
How to edit can settings? or how to upload new setting? How to change bluetooth for “pick up”?
Once again, please forget about key 1, key 2 and SWC.
Pure CAN recoding.
I would like to know the answer to how to recode CANBUS settings. My volume up and down keys work as expected, but my phone key opens the Bluetooth app also and I want to turn it into a "next track" button and the hang up button into a "previous track" button.
For your problem, there is a submenu in 8878. I think it is in "Other" but possibly in CAN that reverse volume up and down. That should fix that problem. If you can't figure it out I will check next time I'm in my van.