This is the brief history of the mysterious case of my phone: a Redmi note 3 pro oficially unlocked bootloader.
The first ROM that I flashed was the AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo)
The phone was a delight with this ROM; a rocket. And so I had it several months.
One day I see that there is a new ROM with very good appearance and assessments; and installed [ROM][Slim][6.0.1][AOSP_r61][Slim 6 For Kenzo].
Another super ROM, like a rocket. I had it a couple of months and, as it had no support for 4G, I decide to return to the AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo). I had a backup, fortunately.
I install the backup of the AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo) and... everything works well, except SIM. I do not have telephone connection.
I install it from zero and... everything works well, except SIM. I do not have telephone connection.
Of course, when installing the [ROM][Slim][6.0.1][AOSP_r61][Slim 6 For Kenzo], I had to install CM13 Radio. That must have deleted the baseband to AOSP 5.1.
No problem.
I flash a ROM MIUI to get the baseband of android 5.1 y...Boootloop.
The phone enters bootloop and does not pass the logo of MIUI.
I have tried everything what I have found in this forum and in that of MIUI to recover the phone.
In the end, the phone was a brick with the logo of miui on my desktop.
I remember my only backup of AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo) and everything works again. Reset to factory data from ROM retrieved from the backup and...everything works well, less the SIM. I do not have telephone connection.
No matter which ROM I install, everything works fine, less the SIM. With the exception of the MIUI ROMs, with those remains in bootloop in the logo.
My phone works but only with the backup of AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo).
Any idea?... any advice?...i do not know what to do...
hi
you can unbrick this methode ;
http://forum.xda-developers.com/redmi-note-3/how-to/unbrick-rn3-hs-usb-900e-edl-cable-100-t3447928
micro77 said:
hi
you can unbrick this methode ;
http://forum.xda-developers.com/redmi-note-3/how-to/unbrick-rn3-hs-usb-900e-edl-cable-100-t3447928
Click to expand...
Click to collapse
Thank you for the advice. It is not mi case. I can use edl correctly. I made several tryes from edl.
ok.
your phone works well ,but no radio singal right ?
no baseband ?
no imei ?
Any EFS backups available? I'd start from there, another option is flashing through EDL mode the stock MIUI ROM. That should restore the device's functionality.
Eyaculé este post en tu cara usando mi Ericsson T28
micro77 said:
ok.
your phone works well ,but no radio singal right ?
no baseband ?
no imei ?
Click to expand...
Click to collapse
From mu backup in aosp5.1, there is radio signal, baseband and imeis. From other roms, no radio signal, no baseband. MIUI ROM just bootloops in logo.
H4T3M4CH1N3 said:
Any EFS backups available? I'd start from there, another option is flashing through EDL mode the stock MIUI ROM. That should restore the device's functionality.
Eyaculé este post en tu cara usando mi Ericsson T28
Click to expand...
Click to collapse
Yes, EFS backups available. flashing through EDL mode the stock MIUI ROM can be done but just bootloops in logo.
Flash, then put the device in Flashboot mode, then use the MiUnlock tool. It should boot.
Eyaculé este post en tu cara usando mi Ericsson T28
no need EFS backup
flash this rom ;
https://docs.google.com/uc?id=0B4oUiKSTOb7oYjNpeEtLLUlSNXc&export=download
with mi flash ;
mi flash 64 bit :
https://drive.google.com/open?id=0B4oUiKSTOb7oSEtmMEI1cWtFbWs
but choose flash.all ok?
http://i.hizliresim.com/A3gPbL.jpg
then restore this qcn your phone with qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oQ01UUG9QdFlHMTA
qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oSG8zRWVwWkNwS2c
after all you can install miui global rom if you need ;
http://bigota.d.miui.com/V7.3.7.0.L...DD_20160523.0000.23_5.1_global_f5889c1549.tgz
muadsoft said:
From mu backup in aosp5.1, there is radio signal, baseband and imeis. From other roms, no radio signal, no baseband. MIUI ROM just bootloops in logo.
Yes, EFS backups available. flashing through EDL mode the stock MIUI ROM can be done but just bootloops in logo.
Click to expand...
Click to collapse
Did u try install MIUI ROM 5.1.1 after flash unlock again.
micro77 said:
no need EFS backup
flash this rom ;
https://docs.google.com/uc?id=0B4oUiKSTOb7oYjNpeEtLLUlSNXc&export=download
with mi flash ;
mi flash 64 bit :
https://drive.google.com/open?id=0B4oUiKSTOb7oSEtmMEI1cWtFbWs
but choose flash.all ok?
http://i.hizliresim.com/A3gPbL.jpg
then restore this qcn your phone with qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oQ01UUG9QdFlHMTA
qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oSG8zRWVwWkNwS2c
after all you can install miui global rom if you need ;
http://bigota.d.miui.com/V7.3.7.0.L...DD_20160523.0000.23_5.1_global_f5889c1549.tgz
Click to expand...
Click to collapse
I am going to try it. Do you have some manual o explication about the process of qpst? . I have been looking for informartion in google but i am not sure about to know how to do it. Thanks.
1yang said:
Did u try install MIUI ROM 5.1.1 after flash unlock again.
Click to expand...
Click to collapse
Yes, many times with the same result. All MIUI Roms, fastboot or recovery, stays in bootloop in logo. The phone has the unlocked bootloader.
muadsoft said:
I am going to try it. Thanks.
Yes, many times with the same result. All MIUI Roms, fastboot or recobery, stays in bootloop in logo. The phone has the unlocked bootloader.
Click to expand...
Click to collapse
Sometimes my phone got relock bootloader after install MIUI ROM and stays in bootloop MIUI, go to fastboot cek use fastboot OEM device-info, if u get
[bootloader] device unlock : false try unlock via miunlock again
That's why I'm afraid to flash CM radios... I prefer to stay in 5.1. 1 aosp rom.. Thanks for sharing your experience
Enviado desde xiaomi Redmi note 3 pro
@micro77, I am so happy. Mi phone boots normally again and all thanks to you.
I have done this:
micro77 said:
no need EFS backup
flash this rom ;
https://docs.google.com/uc?id=0B4oUiKSTOb7oYjNpeEtLLUlSNXc&export=download
with mi flash ;
mi flash 64 bit :
https://drive.google.com/open?id=0B4oUiKSTOb7oSEtmMEI1cWtFbWs
but choose flash.all ok?
http://i.hizliresim.com/A3gPbL.jpg
Click to expand...
Click to collapse
I have a question, and before I make mistakes, I want to ask you. If my phone reboots normally, is it necessary to continue with this step?
then restore this qcn your phone with qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oQ01UUG9QdFlHMTA
qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oSG8zRWVwWkNwS2c
after all you can install miui global rom if you need ;
http://bigota.d.miui.com/V7.3.7.0.L...DD_20160523.0000.23_5.1_global_f5889c1549.tgz
Click to expand...
Click to collapse
muadsoft said:
@micro77, I am so happy. Mi phone boots normally again and all thanks to you.
I have done this:
I have a question, and before I make mistakes, I want to ask you. If my phone reboots normally, is it necessary to continue with this step?
Click to expand...
Click to collapse
good to hear that
no no
ıf your phone is normally now not necessary this steps...
this steps only necessary if phone is no imei ,no baseband .
micro77 said:
good to hear that
no no
ıf your phone is normally now not necessary this steps...
this steps only necessary if phone is no imei ,no baseband .
Click to expand...
Click to collapse
I have been doing tests while you were answering.
Bootloader always unlocked.
Clean Flash of rom aosp 5.1: all ok.
I believe that the solution has been to use these drivers that are in the folder of the first ROM: QDLoader HS-USB Driver_64bit_Setup
The phone was recognized with other drivers before.
@micro77, thank you very much for all. I had spent many hours trying so many things. Even, I dismounted the telephone.
Thank you again.
hello how can i root le 3 pro eui 5.9.020s android 6.0.1 ?
i try many software to root
one-click-root
Rootkhp
Wondershare TunesGo
and it not work
there is a windows software to root the phone ?
read this
https://forum.xda-developers.com/le-pro3/how-to/leeco-le-pro-3-root-t3476560
yes i read this but it is seem to completed all of this.
i can brick the phone if i do something wrong
i need software that do aout root.
like one-click-root
right now ,nothing
I updated the eui from 5.8.19s to 5.9.028s but now I cannot give any app permissions and cannot use any gapps and full of ads can u give a proper solution or to downgrade without root...
Hoping for the reply and solution...
it is very easy to flash rom to older version....
cgigate said:
it is very easy to flash rom to older version....
Click to expand...
Click to collapse
How can I flash the ROM I have not rooted my mobile....
donaldj5 said:
How can I flash the ROM I have not rooted my mobile....
Click to expand...
Click to collapse
flash phone never needs "root";
get in recovery mode to flash the flash zip file
read the stick https://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
I Need LeEco le S3 X626 Stock Rom USA Qualcomm version
I soft bricked boot looped my LeEco le S3 X626 USA (Qualcomm) phone. All I need is the stock recovery. I think that would be 5.8.021s or 5.8.20s or maybe even 5.8.018s might work. I've looked and looked for 2 days and haven't found an active stock download link for LeEco le s3 x626 USA version with qualcomm snapdragon hardware. Please Please can someone help. Thanks in advance.
First if all, Hey everyone, I am new here. I have a leeco lepro 3 x722 bought on banggood. Unfortunately it has a shop rom. My request is, can you give me a full guide, step by step and written in simple English, how to update my Phone? I am really afraid if bricking my Phone. I know there are already some guides here, but i am confused because of So many posts.
Thanks!
You should read, we all started like you. all rom treads have more than enough information
1. unlock bootloader
2. Install TWRP via fastboot
3. Backup your stock rom
4. Flash any rom you like
Guys, Please can anyone explain how to check if recent version of TWRP will work with Leeco S3 X626 with Mediatek Helio X20?
On TWRP compatibility device list at twrp.me/Devices there is no Leeco S3 X626 device listed, but there are some other from Leeco. Can Someone confirm what other model can be chosen and wont brick my device?
Also if I upgrade the stock bootloader with TWRP I'm also oblige to perform ROM update in the same time, or I can still easily work on stock rom until I will do the rom update some other time?
Thx
GoToLe said:
Guys, Please can anyone explain how to check if recent version of TWRP will work with Leeco S3 X626 with Mediatek Helio X20?
On TWRP compatibility device list at twrp.me/Devices there is no Leeco S3 X626 device listed, but there are some other from Leeco. Can Someone confirm what other model can be chosen and wont brick my device?
Also if I upgrade the stock bootloader with TWRP I'm also oblige to perform ROM update in the same time, or I can still easily work on stock rom until I will do the rom update some other time?
Thx
Click to expand...
Click to collapse
Why do you need a higher version?
There are working twrp, for example: 3.1.1. , there is a ported 3.2.1, but the mount to the PC in the original mode does not work.
I will also add, if you have an old version of the ROM, then the recovery should match the firmware version.