Looking for some direction if possible. I have a SM-T580, with no ROM, and am currently unable to flash a ROM via ODIN. I have re-installled TWRP and the verity patch but the device will not boot into TWRP/ recovery to install Lineage OS, or any other ROM for that matter. I attempted to re-pack Lineage as a .tar so that I could try to flash it but ODIN crashed when I tried it. Since my device had already updated to Oreo prior to it failing, I am not been able to reinstall a previous version, (I tried).
Currently am stuck at a flickering Logo screen., but only if USB is plugged in. If not plugged in, no boot...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The message in the top right corner says "Recovery is not SEANDROID Enforcing JTAG lock is not set". I can boot into download mode, just not sure what to flash at this point.
I have been able to restore my t580 back to nougat. Try autoroot here https://forum.xda-developers.com/galaxy-tab-a/how-to/root-t3674409
It will force you to facotry reset your device. The official twrp recovery isn't compatible with the Oreo 8.1 Update. Try flashing followmsi's newest twrp recovery from here https://drive.google.com/drive/mobi...-mGf0b_oQ69wirVcgd-okF-ps?sort=13&direction=a
In Odin (use 3.13.x) untick autoreboot or you will not be able to boot into recovery. After you flash twrp, press vol- and Power. When the screen turns black, immediately switch to home button and vol + and power. When you are succeed at booting twerp, you must format the data partition to remove encryption and reboot again to twerp to be able to use the data partition. Wipe all and install your favourite Rom. Try also to Flash newest followmsi Kernel. You can find it on the link above. I hope you find this post helpful.
In a similar situation. How do you just put it back to stock? I used the twrp, but I then tried to flash the latest stock in odin, and it failed.
another try.
Well my husband managed totally kill my T580 so I gave it a break yesterday. I am going to try @AndroidJail's suggestion below. I will let you know how it turns out. Wish me luck!:fingers-crossed:
Flutterfly said:
Well my husband managed totally kill my T580 so I gave it a break yesterday. I am going to try @AndroidJail's suggestion below. I will let you know how it turns out. Wish me luck!:fingers-crossed:
Click to expand...
Click to collapse
Good luck!
Wish me luck too, I have the same problem as above. Will only show battery icon and download mode if USB is plugged in.
When trying to flash in Odin it just hangs on "Inilitilzation" and nothing ever happens.
redheelerdog said:
Good luck!
Wish me luck too, I have the same problem as above. Will only show battery icon and download mode if USB is plugged in.
When trying to flash in Odin it just hangs on "Inilitilzation" and nothing ever happens.
Click to expand...
Click to collapse
That's exactly what mine was doing. I was able to flash the newest TWRP file that androidjail points to but cannot get it to boot into TWRP. I don't know where to go from there.....
Flutterfly said:
Well my husband managed totally kill my T580 so I gave it a break yesterday. I am going to try @AndroidJail's suggestion below. I will let you know how it turns out. Wish me luck!:fingers-crossed:
Click to expand...
Click to collapse
Start from scratch and download a Nougat version of Android from Sammobile and Odin version 3.13.1. Boot into download mode and plug into PC after starting Odin. In this version of Odin you must unzip the tar file and select ONLY the AP and BL files. If you didn't see "Added" appear in the Odin log box when you plugged in the tablet, then you need to check the Samsung-Usb-Driver-v1.5.61.0 is installed on the PC. This install will replace TWRP with the stock recovery and the tablet should boot the stock ROM. If this works, it means your tablet is OK and we can proceed with installing TWRP and any custom ROM.
edit: There is nothing wrong with AndroidJail's advice. I just advise taking it one step at a time. IOW, get a stock ROM working first to make sure there isn't a hardware problem.
Edit: BTW, you don't have to bother setting up the stock ROM. Just want to make sure it boots OK before proceeding with TWRP and custom ROM.
follow-up question regarding T-580
lewmur said:
Start from scratch and download a Nougat version of Android from Sammobile and Odin version 3.13.1. Boot into download mode and plug into PC after starting Odin. In this version of Odin you must unzip the tar file and select ONLY the AP and BL files. If you didn't see "Added" appear in the Odin log box when you plugged in the tablet, then you need to check the Samsung-Usb-Driver-v1.5.61.0 is installed on the PC. This install will replace TWRP with the stock recovery and the tablet should boot the stock ROM. If this works, it means your tablet is OK and we can proceed with installing TWRP and any custom ROM.
edit: There is nothing wrong with AndroidJail's advice. I just advise taking it one step at a time. IOW, get a stock ROM working first to make sure there isn't a hardware problem.
Edit: BTW, you don't have to bother setting up the stock ROM. Just want to make sure it boots OK before proceeding with TWRP and custom ROM.
Click to expand...
Click to collapse
So I have new information! I was able to Flash the AP and CSC file of the 8.1.0 firmware but when I attempt to flash the BL file, it fails.
This is he error I get:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 5 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> param.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any suggestions? I feel like I'm so close!!
In the same situation
In the same situation.
Upgraded to 8.1, installed Ashyx's version of TWRP.
Was attempting to remove encryption so i could access internal storage and SD card (and install LineageOS 15.1) when I messed up something with the partitions probably wiped out something important, TWRP gave a warning that there's no OS.
Now can't seem to flash anything through Odin (Using 3.13.1).
Tried the stock 8.1, doesn't work, stock BL, AP, CSC, nothing.
"can't open specified line", sometimes just freezes and fails.
Cannot get to recovery, cannot reflash TWRP.
Would love some help.
This is what I get when I try to flash CSC of 8.1:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 75 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)
Any luck?
MajorBoobage said:
In the same situation.
Upgraded to 8.1, installed Ashyx's version of TWRP.
Was attempting to remove encryption so i could access internal storage and SD card (and install LineageOS 15.1) when I messed up something with the partitions probably wiped out something important, TWRP gave a warning that there's no OS.
Now can't seem to flash anything through Odin (Using 3.13.1).
Tried the stock 8.1, doesn't work, stock BL, AP, CSC, nothing.
"can't open specified line", sometimes just freezes and fails.
Cannot get to recovery, cannot reflash TWRP.
Would love some help.
This is what I get when I try to flash CSC of 8.1:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 75 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Were you ever able to get your device working? I
was not, but just recently it was suggested that the wrong Bootloader REV could be causing my issue. Thought I would share with you.
has anyone made any progress regarding this issue. TWRP reboot fails every time I try and I have to flash to OREO 8.1 to restore device. All attempts to downgrade to Android 7 or 6 fail as well.
SM-T580N (canada)
BMcDoh said:
has anyone made any progress regarding this issue. TWRP reboot fails every time I try and I have to flash to OREO 8.1 to restore device. All attempts to downgrade to Android 7 or 6 fail as well.
SM-T580N (canada)
Click to expand...
Click to collapse
Yes, finally. Your issue seems to be the Bootloader
Casper Young said:
Yes, finally. Your issue seems to be the Bootloader
Click to expand...
Click to collapse
How did you get yours working? Which files and bootloader?
Thanks
There are 3 FRP Recovery Locks
redheelerdog said:
How did you get yours working? Which files and bootloader?
Thanks
Click to expand...
Click to collapse
This may be difficult to explain. I've been scouring all through XDA searching for an answer to a second issue and this apparently is a third. So here I need to back up. My first issue was after I rooted my T580. I was Beta testing and on a search and destroy mission with a root method that worked well, yet had a few bugs which I was correcting at the time. I had already provided a fix for the Samsung Security Agent for people to take care of the issue where the device ask users to reboot. And I have noticed it often doesn't charge while in use. In the Developer Settings the USB Configuration does not move from MTP to Charge, this one seemed a Settings issue that I noticed on my tab that no-one else mentioned. I also ran into a difficulty with going to Download Mode and this was yielding different issues. No Recovery was one of them. Others were mentioning a redirection to a locked FRP. I tried to replicate the issue only to be locked into Download Mode and couldn't flash nor leave.
I got out of that by holding the power, home and both volumes down until the device shut off and reset (about 20 seconds). After this I booted up again and the Device Manager was giving me a notification of some security threat asking for a restart. This was the Security Agent again. I turned it off and tried to reboot to recovery. I got redirected to a blue page with red letters at the top left saying, "Custom Binaries Blocked by FRP Lock". The symtoms are: Bootlooping, won't load past Logo screen and often flickers. Download mode is accessable but Odin3 is not flashing official firmware. Worst of all? Absolutely no Recovery. I flashed this in: SM-T580 Binary 4 FRP Unlock.
https://drive.google.com/drive/folders/1iXrZR2E7m6Ai5InAw8u3lzeLhb3ThRo5?usp=sharing
Incorrect or invalid files are the reason for this happening which overload the Binaries so they're blocked! Now this got me out of FRP Lock which ended my personal issue. Here's some things I picked up along the way that are useful,
This one clears Knox:
https://drive.google.com/file/d/1EolYe9auY9jslYSpSgHoon_YB00D2noV/view?usp=sharing
Here's an updated TWRP: (For the T580)
https://drive.google.com/file/d/125ucHgjdNYqs54k2EmiwJZY_KxTdsTMi/view?usp=sharing
And here's a patched Odin3.13B because the normal one has some difficulties:
https://drive.google.com/file/d/13c0uDH99PcUzO0cnHuyBKy2e-b_I1W53/view?usp=sharing
The second issue is with another tablet but very similar. having all the same symptoms but the recovery redirect doesn't say Custom Binaries blocked ect. It said:
Odin Mode
Download Speed
Fast
PRODUCT NAME: SM-T580
CURRENT BINARY: Custom
SYSTEM STATUS: Official
FRP LOCK: ON
Secure Download: Enabled
WARRANTY VOID: 1 (0x0500)
Frp is enabled.
Ignore pit partition
So far I can do nothing to correct the difficulty of the second FRP Lock. And here appears to be a third FRP Lock. This is unusual! It is not advisable to downgrade to 7.1 because of the differences in partitioning. And it's a serious consideration that whomever had the device before may have tried because it referrs to the pit files. I've tried many different methods, OEM Unlock, flashed the bootloader in, the BL, the BL and the AP, the 3 file (BL, AP & CSC) and the 4 file (BL, AP & Home CSC) and got nothing! But fixing the partition or pit files wasn't one of the methods.
Try holding Power+ Vol up AND vol down + home button (touch the screen with entire thumb over the charging port) all at once. When you see the writing popup let go of power but keep the other buttons pressed. Hope it helps. Worked for me
S.S
So Casper, just to confirm, you are able to load this TWRP on your T580 with 8.1? I have a rooted P580 with Samsung 8.1 and have never managed to get TWRP to load - I get a black screen/can't boot and have to install vanilla all over again to get past that. To my knowledge after searching everywhere there has not been a fix as of this date (9/30/19), and lots of people want that fix so they can load the adoptable storage patch zip and get past the 16GB storage limitation - that is my impetus as well - bought a quality high speed microSD for that purpose. Put many hours into already this so am reluctant to try again unless someone has verified that this TWRP will load under 8.1 on a 580. I assume that the T580 and P580 are TWRP identical. My FRP is unlocked so I don't share that part of your problem.
Having similar issue with my t580. Can boot to download mode but nothing else. Can get to splash screen if I leave download mode, but tablet sits there. If I plug it into wall charger I have grey battery icon with lightning bolt. I have tried flashing many combination files and BL/AP/CSC files with no luck. Odin(v3.13 and modded) hang at either setup connection or initialization. Trying to install TWRP does the same. I'm about ready to use this thing as a small boogie board. I have some images I'll post
See attached images. Also, screen will "flicker" aometimes. Not sure if that has to do with low battery or what. But when it is flickering, Odin seems to get to sboot. Well it did once. At that point FRP lock was showing off in Odin. But device would not boot back to download mode til I charged it for about 10min. Once I booted back to download mode, FRP was back on.
Well, I had a major problem with my T-580, no OS, unable to boot, tried 3 PCs and 2 laptops with no luck. Odin would just hang and that just sucked ass. (device battery had gone completely dead, that was the only thing that put me in the boot loop)
Posted questions in this thread and started another with no luck. https://forum.xda-developers.com/ga...italzation-t3870557/post78234744#post78234744
Damn near took a hammer to the MF several times but I didn't. :laugh:
I got an email last week about some responses to this thread and started reading, in the past I had taken out the 64MB micro SD and tried to load some files on it that way but that never worked.
I picked up the T-580 a couple of days ago, plugged it in (totally dead), let it charge for maybe 10mins.
I held the power, vol +-, and home buttons... and low and behold, the SOB booted up into the normal home screen!
I really could not believe it started right up without doing anything.
The 64MB micro SD was out of the slot when all this went on, so I think maybe all the BS with Odin and OS locks had something to do with the micro SD? Not sure, but I am glad I did not smash the MF.
Probably won't help anyone with this post but I wanted to share my latest experience with a rooted T-580. I would probably not root these devices again based on this **** ass experience, but I am glad I got the thing back.
redheelerdog said:
Well, I had a major problem with my T-580, no OS, unable to boot, tried 3 PCs and 2 laptops with no luck. Odin would just hang and that just sucked ass. (device battery had gone completely dead, that was the only thing that put me in the boot loop)
Posted questions in this thread and started another with no luck. https://forum.xda-developers.com/ga...italzation-t3870557/post78234744#post78234744
Damn near took a hammer to the MF several times but I didn't. :laugh:
I got an email last week about some responses to this thread and started reading, in the past I had taken out the 64MB micro SD and tried to load some files on it that way but that never worked.
I picked up the T-580 a couple of days ago, plugged it in (totally dead), let it charge for maybe 10mins.
I held the power, vol +-, and home buttons... and low and behold, the SOB booted up into the normal home screen!
I really could not believe it started right up without doing anything.
The 64MB micro SD was out of the slot when all this went on, so I think maybe all the BS with Odin and OS locks had something to do with the micro SD? Not sure, but I am glad I did not smash the MF.
Probably won't help anyone with this post but I wanted to share my latest experience with a rooted T-580. I would probably not root these devices again based on this **** ass experience, but I am glad I got the thing back.
Click to expand...
Click to collapse
You should name it Lazarus....?
Related
So I've got a Euro non-carrier galaxy tab - shortly after receiving it I've done an update via Kies and this appears to of bricked the device.
Here is what happens:
Booting normally, the device sits on the Samsung logo and occasionally vibrates. This can go on for hours
In recovery, I get:
update media, please wait
update media, finished
#manual mode#
update application, please wait
check_point2: /data/app is not directory
followed shortly by the recover menu, with the following extra lines:
update application, finished
-appling muti-csc...
installing muti-csc
Now, here are the things I've done that I think are related
OCLF
Root
So - How do I fix this? I've tried pushing a fresh firmware back onto the device via odin 1.7, and this fails:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_P1000XXJM6.tar.md5 is valid.
<OSM> MODEM_P1000XXJM6.tar.md5 is valid.
<OSM> CSC_P1000OXAJM6.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm running on an x64 win7 box btw.
I've tried:
wipe data/factory reset from recovery, which takes me to the screen with the andy and an orange ! in a triangle, but nothing more
the same happens if i try any option from recovery, really.
I welcome any suggestions - I've found a few people having similar issues, but no real luck in trying their solutions.
Oh hang fire guys, 'Phone EFS clear' appears to have fixed it...it's reflashing now in any case..
edit: i take that back, its made no difference at all. Ideas?
Anyone? Please help
thepittbull said:
Anyone? Please help
Click to expand...
Click to collapse
Don't panic! As I understand you did OCLF that converted Samsung proprietery RFS into ext4. This means that in order to reflash anything new you would need to convert it back. There is extensive material on how to revert it on XDA, for example in Samsung Vibrant development forum.
Look for it and revert. Then you can use Odin.
I did a similar thing the first time Kies offered me an update for my Samsung Galaxy S, I knew I was supposed to undo the OCLF first but in my haste to sample the new firmware I forgot.. Anyway, you won't be able to fix this with Kies as you'll need to do a full flash with re-partition via Odin. Good luck, I hope you get it working again!
Tried a full flash... now am stuck at the samsung logo...
thepittbull said:
Tried a full flash... now am stuck at the samsung logo...
Click to expand...
Click to collapse
Try to shut it down holding Power button. Then holding Volume-Up and Power try to boot it into recovery.
If you see text on the screen you can try to select to do full wipe following directions from the Tab screen, then reboot.
Another option is to flash Roto-JME with internal SD formatting. This operation is supposed to restore original RFS file system as well as firmware.
Since I never did this on a top of ext4 files system and I cannot say anything about the outcome.
Thanks will try that. Downloding Roto-JME-FmtIntSD-v2.zip now
Look for the dbdata.tar file on this forum and run Odin again (2nd run)
Got it! It worked. Thanks Adapt0r! Thanks so much!
M110S Soft Bricked Solution
Hey !! i decided to make this thread because i saw many people from different countries and forums complaining about Korean M110s !!!
First of all if you messed up your device and you tried to re-partition and different pit files and wanna revert to stock this is fix for you !!
i myself spent 5 hours online trying to figure out how to fix my device ! so if you got M110s and its converted to i9000 ,you tired flashing i9000 firmware and it fails and on sticker under battery its written :GT-i9000 and I9000GSMH (scam)
its not my work i found the solution in other site and i would like to thank the original person who did this ! and ill try to expand his work i know its frustrating !!
**********************************
Common problems :
1-No Network
2-Home button is not working
3-UNkown baseband
4-No IMEI
5-No sounds
*********************************
Go to http://imei-number.com/imei-number-lookup/ and type your IMEI written under battery to see if you got the i9000 or M110S
Step 1 download Repair KiT from here ===> http://www.4shared.com/zip/In6R5gmA/repair.html
after you download the file extract it
Step 2 you will find Odin.exe in the extracted folder Run it and follow !
After running Odin enter Download mode (Volumedown+home+power(if u are coming from i9000 firmware) and home+power(M110S))
When you want to click on PIT OR PDA OR CSC Navigate to folder you extracted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here You enter Donwload mode again with (Volumedown+home+power(if u are coming from i9000 firmware) and home+power(M110S))
Here your phone may boot please turn it off and enter Download mode by only HOME+POWER
Then your Phone should boot up Normally !! if You want you can flash latest firmware for M110S version 2.3.6 by entering download mode! leave
everything in odin and make sure re-partition is not checked and you are not using any PIT file just by downloading the firmware and press On PDA and navigate to its download location..(after extracting it ) here is the link ====> http://hotfile.com/dl/162341619/ed86...7_SKT.zip.html
reslan_912 said:
Hey !! i decided to make this thread because i saw many people from different countries and forums complaining about Korean M110s !!!
Click to expand...
Click to collapse
The M110S FAQ, Q&A, Guides etc Thread is here
Anything and Everything for M110S is compiled and known as PIT STOP
M110S Scam is also Exposed here
Yeah but Ive to put it in i9000 general and i used the thread things is not clear! So i made it for others
Sent from my GT-N7000 using Tapatalk 2
reslan_912 said:
M110S Soft Bricked Solution
Hey !! i decided to make this thread because i saw many people from different countries and forums complaining about Korean M110s !!!
First of all if you messed up your device and you tried to re-partition and different pit files and wanna revert to stock this is fix for you !!
i myself spent 5 hours online trying to figure out how to fix my device ! so if you got M110s and its converted to i9000 ,you tired flashing i9000 firmware and it fails and on sticker under battery its written :GT-i9000 and I9000GSMH (scam)
its not my work i found the solution in other site and i would like to thank the original person who did this ! and ill try to expand his work i know its frustrating !!
**********************************
Common problems :
1-No Network
2-Home button is not working
3-UNkown baseband
4-No IMEI
5-No sounds
*********************************
Go to http://imei-number.com/imei-number-lookup/ and type your IMEI written under battery to see if you got the i9000 or M110S
Step 1 download Repair KiT from here ===> http://www.4shared.com/zip/In6R5gmA/repair.html
after you download the file extract it
Step 2 you will find Odin.exe in the extracted folder Run it and follow !
After running Odin enter Download mode (Volumedown+home+power(if u are coming from i9000 firmware) and home+power(M110S))
When you want to click on PIT OR PDA OR CSC Navigate to folder you extracted
Here You enter Donwload mode again with (Volumedown+home+power(if u are coming from i9000 firmware) and home+power(M110S))
Here your phone may boot please turn it off and enter Download mode by only HOME+POWER
Then your Phone should boot up Normally !! if You want you can flash latest firmware for M110S version 2.3.6 by entering download mode! leave
everything in odin and make sure re-partition is not checked and you are not using any PIT file just by downloading the firmware and press On PDA and navigate to its download location..(after extracting it ) here is the link ====> http://hotfile.com/dl/162341619/ed86...7_SKT.zip.html
Click to expand...
Click to collapse
i followed these instructions and i got stuck at param.lfs..
help me pls?
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> param.lfs
software bricked
i followed these instructions and i got stuck at param.lfs.. help me pls?
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> param.lfs
Kashif.Ali said:
i followed these instructions and i got stuck at param.lfs.. help me pls?
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> Enter CS for MD5..
<ID:0/004> Check MD5.. Do not unplug the cable..
<ID:0/004> Please wait..
<ID:0/004> Checking MD5 finished Sucessfully..
<ID:0/004> Leave CS..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> param.lfs
Click to expand...
Click to collapse
The same exact problem happened to me. I believe it was caused by the USB connection not being strong enough for the recovery. I managed to get it to work by using a different USB port on my computer and trying repeatedly to make the recovery. After many attempts it went through and was successful. You likely will notice there is zero activity in Odin when this problem is encountered. I would try another USB port, start over with the same port (pull battery), try a different cable, try a different computer. After several hours of repeated attempts it finally went through for me.
I also used a different version of Odin to do the recovery v. 3.04. More about that version is shown here:
http://forum.xda-developers.com/showthread.php?t=1703998 The connection to Odin is a light blue in that version NOT yellow. I can confirm a very successful recovery from a soft bricked m110s.
I followed the steps shown in the Pit Stop which mirror these. The USB connection was so poor that occasionally it could not even be detected as a com port. One last thing is I made sure that all Kies processes were not running. I am on Windows Vista. CTL-ALT-DEL and end all Kies processes. I also had to load USB drivers which are part of heimdall-suite-1.3.1-win32. Look for a drivers directory in that suite and a file named zadig.exe. I'm totally new to this scene but you need a response and it worked for me. I hope some of what I wrote will help you and give you the answer to your recovery or some options to try to get the recovery started.
Error on Second Stage
I am getting Failed Notification in Sceond Stage What should I do????
I hv tried again and again but every time on second stage it gets Failed. Can I bypass second Stage
and wt would I lose if I bypass 2nd stage
RolandSyn said:
I believe it was caused by the USB connection not being strong enough for the recovery.
Click to expand...
Click to collapse
says it all about your level of knowledge )))
soo imho step 1 and 2 are usless and what would help and shorten the process is: step 3 with repartion ticked and pitfile from step 1
also it is good idea to backup /EFS/ partition that contains IMEI and from my experience when you flash wrong firmware (wrong device)
the efs partition aka imei gets corrupted and gives you back some internaly hardcoded imei with zeros at the end
so also the process of checking imei (checking device type) is not fully reliable
good intentions but poor execution - good if it works for ome but ...
Thank! dear for saving my bricked phone.
I bought a GT-I9000 from a online dealer but it was not a actual, it was a fake I9000 it was a M110s but I was not aware of this, its firmware version was 2.3.4 and have a lidroid rom installed with I9000 model no. and it was not connecting with Kies anymore so I decided to upgrade with Odin so I downloaded I9000 firmware with 2.3.6, and my phone got bricked. finally I found your guide and I saved my bricked phone.
thanks for your hard work.
But sir before its model no. and starting screen was showing GT-I9000 but now it is M110s at all. please can you give me any link to restore again to GT-I9000 model no. and starting screen. I have no additional information about baseband version but I only know Its model no. was
I9000 kernel version 2.6.35.7 build number lidroid- I9000-1.2
m110s Problem
omeryasin said:
I am getting Failed Notification in Sceond Stage What should I do????
I hv tried again and again but every time on second stage it gets Failed. Can I bypass second Stage
and wt would I lose if I bypass 2nd stage
Click to expand...
Click to collapse
I Have Same Broblem Pls help I thik That File was Broken Or Not Supported some Version
reslan_912 said:
M110S Soft Bricked Solution
Hey !! i decided to make this thread because i saw many people from different countries and forums complaining about Korean M110s !!!
First of all if you messed up your device and you tried to re-partition and different pit files and wanna revert to stock this is fix for you !!
i myself spent 5 hours online trying to figure out how to fix my device ! so if you got M110s and its converted to i9000 ,you tired flashing i9000 firmware and it fails and on sticker under battery its written :GT-i9000 and I9000GSMH (scam)
its not my work i found the solution in other site and i would like to thank the original person who did this ! and ill try to expand his work i know its frustrating !!
**********************************
Common problems :
1-No Network
2-Home button is not working
3-UNkown baseband
4-No IMEI
5-No sounds
*********************************
Go to http://imei-number.com/imei-number-lookup/ and type your IMEI written under battery to see if you got the i9000 or M110S
Step 1 download Repair KiT from here ===> http://www.4shared.com/zip/In6R5gmA/repair.html
after you download the file extract it
Step 2 you will find Odin.exe in the extracted folder Run it and follow !
After running Odin enter Download mode (Volumedown+home+power(if u are coming from i9000 firmware) and home+power(M110S))
When you want to click on PIT OR PDA OR CSC Navigate to folder you extracted
Here You enter Donwload mode again with (Volumedown+home+power(if u are coming from i9000 firmware) and home+power(M110S))
Here your phone may boot please turn it off and enter Download mode by only HOME+POWER
Then your Phone should boot up Normally !! if You want you can flash latest firmware for M110S version 2.3.6 by entering download mode! leave
everything in odin and make sure re-partition is not checked and you are not using any PIT file just by downloading the firmware and press On PDA and navigate to its download location..(after extracting it ) here is the link ====> http://hotfile.com/dl/162341619/ed86...7_SKT.zip.html
Click to expand...
Click to collapse
thanks for fix it :good::good:
This link http://hotfile.com/dl/162341619/ed86...7_SKT.zip.html is dead. Please update sir.. :laugh:
Odin is not detecting my m110s...
odin is not detecting my samsung s korean m110s in download mode......i've installed the samsung drivers but no response from odin.......... help me please..........:crying:
thnx thnx & thnx
thnx man you saved my life hahaha i just bricked my cousins phone and finally got your forum some how by googling and i also had google PITSTOP and it's links are also working but archive files were not working so you are the hero of the day
this saved me
this ROM saved my cousin's "no signal" issue
[GALAXY S] Typhoonoid Aokp Ver. 5.0.zip
just google it, i cant post the link
new problem in galaxy m110s
i have flash this Mobil galaxy m110s with galaxy s i9000 ROM from Samsung website the Odin start flash but in the end give me filer
when i restart the Mobil not open again .
stay in black screen no power no thing.
when i charge it no charging screen
no any thing .
any help here ????
good job bro thanks for fix it ( can u tell me where u find this file M110S )
Br
MozzumalGsM
Need some help
Thought i have I9000 but seems like i have M110S.
Use odin to flash but now only thing i get is on startup the S logo and then it reboots.
When i take out the battery and put it back. Connect the USB cable it starts and show the little ring what freezes but after couple of minutes it connects to the PC and shows 2 memory cars. None of them i can access because PC tells me not partitioned. Cannot get the odin to connect and adb neither sees the phone.
Is there any way to get it running again?
help
nuwan thanura said:
I Have Same Broblem Pls help I thik That File was Broken Or Not Supported some Version
Click to expand...
Click to collapse
ya its also same here
but the 4n is ok now
Hi,
My wife's phone SM-G935F started to bootloop after a normal update. It goes to the loading screen (IMG 1) and just stays there. The only thing I can do from there is VolDown+Power to reset or Voldown+Home+Power to Recovery mode.
Can't access factory reset mode, and the only other thing i've been able for it to show is the light-blue screen with the "!" simbol and "Try using Smart Switch Recovery..." which didn't work.
IMG1= https://s11.postimg.org/w6vna4mwz/20161029_180455.jpg
I Don't exacly know the region of the phone, but i think it is the Trinidad and Tobago one (International unlocked bought from B&H).
Anyone knows how to know region from a cell you can't boot?
Also don't know if OEM was active or not, but i think this is the problem. If i can't boot the cell, hoy to disable OEM prot?
When I try to ODIN it shows this:
http://postimg.org/image/4yyt2sd1b/
And then it FAILS
I don't know what more to do.
My odin active options are:
Auto Reboot
F. Reset Time
And the phome screen goes from this:
http://postimg.org/image/qwqoiu2nz/
To displaying this
http://smg.photobucket.com/user/brava/media/20150902_012011_zpsjm9lr9np.jpg.html
Just instead of RECOVERY, it says BOOT.
I successfully updated the bootload so the "!" simbol and "Try using Smart Switch Recovery..." screen isn't showing anymore, but the bootloop is still going. Cant update the AP, CP not CSC.
Anyone has any idea what can i do?
This phone was running Marshmelow, never had been rooted and never used custom roms in it. It was only 3 months old. Think of the children
Thanks
smart switch will work if you download the drivers to your computer. this step is necessary to allow smart switch to see your phone.
then use smart switch, click on more, emergency recovery, then device initialization.
followinstructions, it should take about 5 minutes to recover your phone, if you have input the correct information.
Cosmic Blue said:
smart switch will work if you download the drivers to your computer. this step is necessary to allow smart switch to see your phone.
then use smart switch, click on more, emergency recovery, then device initialization.
followinstructions, it should take about 5 minutes to recover your phone, if you have input the correct information.
Click to expand...
Click to collapse
Does the phone needs to be in download mode? or in the loading screen is ok?
Only 3 options I have are:
Boot screen (galaxy screen)
Powered Off
Download mode.
I can't reach any other screens.
Thanks!
Sedado77 said:
Does the phone needs to be in download mode? or in the loading screen is ok?
Only 3 options I have are:
Boot screen (galaxy screen)
Powered Off
Download mode.
I can't reach any other screens.
Thanks!
Click to expand...
Click to collapse
Loading screen is fine as long as smart switch can see your phone, the procedure should work.
I was in the same position once.
what have u chosed in odin? this look like bootloader is broken
Cosmic Blue said:
Loading screen is fine as long as smart switch can see your phone, the procedure should work.
I was in the same position once.
Click to expand...
Click to collapse
Smart Swich is working as ****. it doesn't load the recovery screen even if the phone is not connected
Any idea how to make it work=?
Windows 7 x64 here.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> param.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Here is my ODIN log when I try to BT/AD my phone.
Sedado77 said:
Here is my ODIN log when I try to BT/AD my phone.
Click to expand...
Click to collapse
This is the case when i try to AD everytime. I'm quite sure my problem is the region of the firmware, but i can't know WHICH firmware to download. I called the US store where i bought it and they told me it was from Vietnam.
Got the Vietnam Stock Firmware (XXV) and it still is "Blocked by FRP Lock" when it tryies to do the recovery.img file...
Anyone knows how to get the region of the phone from the serial/imei or any other meens whith a soft bricked phone?
I tried SmartSwitch but it had the same problem. I think it used the region from the BL/CSC i flashed to it instead of the original one...
Also, the radio from the Vietnam version didn't match my phone...
Any ideas?
I can't take it to the manufacturer, i bought it online from H&M in the US and I live in South America.
HELP!!!:crying::crying:
load Odin 3.1.2.3
load Samsung_G935x_QC_Rooted_BOOT.TAR
Power off Phone ( hold Power + Vol down) ..... hold Power+Home+Vol down to enter Download mode....
connect S7 Edge to Computer ( DL Mode)
open Odin as an Administrator (!!) - right click on Odin-
put "Samsung_G935x_QC_Rooted_BOOT.TAR" in Odin
Flash
if it won`t work... try a samsung kernel... without root
I have same problem as OP help ? I had 7.0 update but it only made my phone restart, now i flashed official with odin and now stuck in bootloop... can only seem to access download mode, smart switch if i try connect says my phone is not supported.. what the hell to do now ???
Hi guys,
so my mobile is now going into download mode
if you want to see the full story of how my mobile bricked you can check my previous question.
https://forum.xda-developers.com/s7-edge/help/s7-edge-sm-g935fd-completely-dead-hard-t4077485
as of now i can go into the download mode but when i try to flash the 7.0 Nougat version rom with it (the version which it had installed when it got bricked)
it starts the process but then it fails below is the log details :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4143 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
if i just turn on the mobile its says something like "an error occcured while updating the software please connect to smart switch"
if anyone has any idea please advice , as i didnt get any response on my previous question as well
and yes i searched online already and but the methods i found didnt help
Thanks in advance.
abdullah61129 said:
Hi guys,
so my mobile is now going into download mode
if you want to see the full story of how my mobile bricked you can check my previous question.
https://forum.xda-developers.com/s7-edge/help/s7-edge-sm-g935fd-completely-dead-hard-t4077485
as of now i can go into the download mode but when i try to flash the 7.0 Nougat version rom with it (the version which it had installed when it got bricked)
it starts the process but then it fails below is the log details :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4143 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
if i just turn on the mobile its says something like "an error occcured while updating the software please connect to smart switch"
if anyone has any idea please advice , as i didnt get any response on my previous question as well
and yes i searched online already and but the methods i found didnt help
Thanks in advance.
Click to expand...
Click to collapse
Did you try connecting the phone to smart switch and try recovering from there?
Sent from my SM-G985F using Tapatalk
abdullah61129 said:
Hi guys,
so my mobile is now going into download mode
if you want to see the full story of how my mobile bricked you can check my previous question.
https://forum.xda-developers.com/s7-edge/help/s7-edge-sm-g935fd-completely-dead-hard-t4077485
as of now i can go into the download mode but when i try to flash the 7.0 Nougat version rom with it (the version which it had installed when it got bricked)
it starts the process but then it fails below is the log details :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4143 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
if i just turn on the mobile its says something like "an error occcured while updating the software please connect to smart switch"
if anyone has any idea please advice , as i didnt get any response on my previous question as well
and yes i searched online already and but the methods i found didnt help
Thanks in advance.
Click to expand...
Click to collapse
This looks more like emmc chip (your phone's storage chip) error, you already lost all your data and if its a hardware issue then i doubt software reflash could fix it, but do tell me what was your current firmware number which was in your phone before all this , also send a pic of download mode..
Also what screen stripes you were talking about in your earlier thread? Send a screenshot of them too (looks more like a hardware problem too)
If you can't post images here on xda, just upload to an external site like imgur and send your pic link here ..
Per my best knowledge, smart switch doesnot support emergency recovery anymore (but if it still supports in some old versions or it works - then please do try that too) .. Good luck
Sent from my S7 Edge using XDA Labs
vash_h said:
Did you try connecting the phone to smart switch and try recovering from there?
Sent from my SM-G985F using Tapatalk
Click to expand...
Click to collapse
havent tried that since i am afraid if i do that i might lose the data , maybe it might format and put the latest firmware in it
shah22 said:
This looks more like emmc chip (your phone's storage chip) error, you already lost all your data and if its a hardware issue then i doubt software reflash could fix it, but do tell me what was your current firmware number which was in your phone before all this , also send a pic of download mode..
Also what screen stripes you were talking about in your earlier thread? Send a screenshot of them too (looks more like a hardware problem too)
If you can't post images here on xda, just upload to an external site like imgur and send your pic link here ..
Per my best knowledge, smart switch doesnot support emergency recovery anymore (but if it still supports in some old versions or it works - then please do try that too) .. Good luck
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
My firmware was Nougat 7.0 . S7 EDGE SM-G935FD
I will try to put the images on the site you mentioned and give the link here
i didnt try the smart switch as i was afraid it might automatically format it and put the latest firmware , i hope the emmc ship is still recoverable as thats my only hope if firmware flashing doesnt help
shah22 said:
This looks more like emmc chip (your phone's storage chip) error, you already lost all your data and if its a hardware issue then i doubt software reflash could fix it, but do tell me what was your current firmware number which was in your phone before all this , also send a pic of download mode..
Also what screen stripes you were talking about in your earlier thread? Send a screenshot of them too (looks more like a hardware problem too)
If you can't post images here on xda, just upload to an external site like imgur and send your pic link here ..
Per my best knowledge, smart switch doesnot support emergency recovery anymore (but if it still supports in some old versions or it works - then please do try that too) .. Good luck
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
https://www.dropbox.com/sh/w1d8bdoiyaw2air/AAAZSWRYgXDAqRqWJRIz1ETEa?dl=0
this is the link to both the download mode pic and the screen pic
although the screen doesnt scramble now it can go to download mode
if i try to flash in odin i get the error at recovery.img
abdullah61129 said:
https://www.dropbox.com/sh/w1d8bdoiyaw2air/AAAZSWRYgXDAqRqWJRIz1ETEa?dl=0
this is the link to both the download mode pic and the screen pic
although the screen doesnt scramble now it can go to download mode
if i try to flash in odin i get the error at recovery.img
Click to expand...
Click to collapse
Sorry your problem looks like a hardware error.. and i don't think you can recover your data any more
Sent from my S7 Edge using XDA Labs
shah22 said:
Sorry your problem looks like a hardware error.. and i don't think you can recover your data any more
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
that sucks man
what about the emmc chip , would it be possible to do a chip off recovery?
what i dont understand is that if its a hardware issue then why does it even turn on and allow me to go to the recovery mode
abdullah61129 said:
that sucks man
what about the emmc chip , would it be possible to do a chip off recovery?
what i dont understand is that if its a hardware issue then why does it even turn on and allow me to go to the recovery mode
Click to expand...
Click to collapse
What was the last firmware present on your phone. Hardware damage is always tricky.. sometimes it allows phone to boot with weird things going on before completely failing..
I can see that your bootloader number is 2 , i will give you the combination rom, try flashing that in odin
Be warned that all your data in your phone is already lost, at this point your only goal is to make your phone working again, thats where i am helping..
Combination u2 rom : https://drive.google.com/file/d/1JKDiV3LmqUt8GLlOLnmZ6Xsqxn-Hpv9d/view?usp=drivesdk
Flash it in odin 3.14.4 and untick auto reboot in odin options, if flashing is successful .. ur phone will still be in download mode.. hold vol down + home + pwr button to force reboot and when phone starts rebooting( screen goes black ) immediately change holding from vol down to vol up+ home + pwr buttons , trick here is to force reboot to recovery directly from download mode without booting combination rom, do a factory data wipe in combination recovery.. then clear cache and then try reboot to combination rom..
If you could boot into combination rom, run some hardware tests.. and report back, if everything goes good, we can try flashing the last stock firmware that was present on your device, Good luck
Sent from my S7 Edge using XDA Labs
shah22 said:
What was the last firmware present on your phone. Hardware damage is always tricky.. sometimes it allows phone to boot with weird things going on before completely failing..
I can see that your bootloader number is 2 , i will give you the combination rom, try flashing that in odin
Be warned that all your data in your phone is already lost, at this point your only goal is to make your phone working again, thats where i am helping..
Combination u2 rom : https://drive.google.com/file/d/1JKDiV3LmqUt8GLlOLnmZ6Xsqxn-Hpv9d/view?usp=drivesdk
Flash it in odin 3.14.4 and untick auto reboot in odin options, if flashing is successful .. ur phone will still be in download mode.. hold vol down + home + pwr button to force reboot and when phone starts rebooting( screen goes black ) immediately change holding from vol down to vol up+ home + pwr buttons , trick here is to force reboot to recovery directly from download mode without booting combination rom, do a factory data wipe in combination recovery.. then clear cache and then try reboot to combination rom..
If you could boot into combination rom, run some hardware tests.. and report back, if everything goes good, we can try flashing the last stock firmware that was present on your device, Good luck
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
I honestly dont remember the exact firmware details, all i know is that it was Nougat 7.0 and an update was available for a long time but i didnt update as i had no space (like only 800 or 900mb was left)
I see, so the data is lost.
Soo this combination U2 rom , it will replace the rom which was previously installed?
Sorry i am just trying to learn more about this combination U2 rom as i have never read about it
Thanks
shah22 said:
What was the last firmware present on your phone. Hardware damage is always tricky.. sometimes it allows phone to boot with weird things going on before completely failing..
I can see that your bootloader number is 2 , i will give you the combination rom, try flashing that in odin
Be warned that all your data in your phone is already lost, at this point your only goal is to make your phone working again, thats where i am helping..
Combination u2 rom : https://drive.google.com/file/d/1JKDiV3LmqUt8GLlOLnmZ6Xsqxn-Hpv9d/view?usp=drivesdk
Flash it in odin 3.14.4 and untick auto reboot in odin options, if flashing is successful .. ur phone will still be in download mode.. hold vol down + home + pwr button to force reboot and when phone starts rebooting( screen goes black ) immediately change holding from vol down to vol up+ home + pwr buttons , trick here is to force reboot to recovery directly from download mode without booting combination rom, do a factory data wipe in combination recovery.. then clear cache and then try reboot to combination rom..
If you could boot into combination rom, run some hardware tests.. and report back, if everything goes good, we can try flashing the last stock firmware that was present on your device, Good luck
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
does flashing a combinatiom rom usually make a mobile lose its data?
what if theres still a chance to recover the data
abdullah61129 said:
I honestly dont remember the exact firmware details, all i know is that it was Nougat 7.0 and an update was available for a long time but i didnt update as i had no space (like only 800 or 900mb was left)
I see, so the data is lost.
Soo this combination U2 rom , it will replace the rom which was previously installed?
Sorry i am just trying to learn more about this combination U2 rom as i have never read about it
Thanks
Click to expand...
Click to collapse
It will just help to unbrick your device (provided that it gets flashed successfully in odin first)
Just follow my steps in above post after (if) odin could flash successfully.
Sent from my S7 Edge using XDA Labs
---------- Post added at 06:28 PM ---------- Previous post was at 06:19 PM ----------
abdullah61129 said:
does flashing a combinatiom rom usually make a mobile lose its data?
what if theres still a chance to recover the data
Click to expand...
Click to collapse
You tried flashing already..
Flashing anything has the risk to lose all your data if you have no backup before ..
And flashing with HOME CSC doesn't erases data..
But as you said you tried flashing various stock firmwares, but odin failed in the middle..
So yeah, i think your data is already lost
But if it was that important , i seen some android programs which can recover deleted files from phone but they are mostly paid and also phone should be in working condition..
Also there are professional data recovery companies who would take in your phone and pull its memory chip apart and use their special hardware on that chip to extract anything they could.. but there is no guarantee that you will get back any important data from it and their cost is huge for this process..
Thats why its recommended to always keep a back up of all your data
Sent from my S7 Edge using XDA Labs
shah22 said:
It will just help to unbrick your device (provided that it gets flashed successfully in odin first)
Just follow my steps in above post after (if) odin could flash successfully.
Sent from my S7 Edge using XDA Labs
---------- Post added at 06:28 PM ---------- Previous post was at 06:19 PM ----------
You tried flashing already..
Flashing anything has the risk to lose all your data if you have no backup before ..
And flashing with HOME CSC doesn't erases data..
But as you said you tried flashing various stock firmwares, but odin failed in the middle..
So yeah, i think your data is already lost
But if it was that important , i seen some android programs which can recover deleted files from phone but they are mostly paid and also phone should be in working condition..
Also there are professional data recovery companies who would take in your phone and pull its memory chip apart and use their special hardware on that chip to extract anything they could.. but there is no guarantee that you will get back any important data from it and their cost is huge for this process..
Thats why its recommended to always keep a back up of all your data
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
yes i tried flashing the stock but that recovery.img error occurs.
i have always read people say that you lose data after flashing a stock rom which isnt true as i recently flashed Note 3 Neo SM N7502 and Note 3 SM-N9005
both with stock rom and all the data, apps and contacts were intact.
i only used the AP files on both and nothing else
but i have never flashed a combination rom so was curious if the data is erased if that is flashed.
Yes, i have seen several apps like wondershare/dr fone which can recover the data but the problem is they either require root or say if unrooted the USB debugging has to be on , in my case i never rooted nor turned on the USB debugging mode as i never needed it.
i live in dubai , currently i am searching for someone who can professional pull out all the data from the chip but due to the coronavirus lockdown all shops are shut and even online technician arent active.
Yes its better to always backup the data, it happened so suddenly as i mentioned in my first post it automatically went blank when i plugged in my usb
anyhow i will try to flash the combination rom and let you know
Thanks
abdullah61129 said:
yes i tried flashing the stock but that recovery.img error occurs.
i have always read people say that you lose data after flashing a stock rom which isnt true as i recently flashed Note 3 Neo SM N7502 and Note 3 SM-N9005
both with stock rom and all the data, apps and contacts were intact.
i only used the AP files on both and nothing else
but i have never flashed a combination rom so was curious if the data is erased if that is flashed.
Yes, i have seen several apps like wondershare/dr fone which can recover the data but the problem is they either require root or say if unrooted the USB debugging has to be on , in my case i never rooted nor turned on the USB debugging mode as i never needed it.
i live in dubai , currently i am searching for someone who can professional pull out all the data from the chip but due to the coronavirus lockdown all shops are shut and even online technician arent active.
Yes its better to always backup the data, it happened so suddenly as i mentioned in my first post it automatically went blank when i plugged in my usb
anyhow i will try to flash the combination rom and let you know
Thanks
Click to expand...
Click to collapse
You cannot compare a note 3 with s7 series generation lol
And yes , flashing a stock rom wipes all data if you DON'T choose HOME _ CSC in csc box..
Flashing with home_csc won't cause data loss but its akin to a dirty flash .. causes problems and is there for upgrading android os without data loss, and its not generally a good thing to NOT wipe data and factory reset after flashing as it causes problems..
IF YOU INTEND TO DO A PROFESSIONAL RECOVERY OF YOUR DATA DON'T FLASH ANYTHING ANYMORE AS IT WILL FURTHER MAKE IT DIFFICULT TO RETRIEVE !
WARNING : combination rom would wipe all your data, so be warned if you flash it, it would be even more difficult to recover data ..
Sent from my S7 Edge using XDA Labs
shah22 said:
You cannot compare a note 3 with s7 series generation lol
And yes , flashing a stock rom wipes all data if you DON'T choose HOME _ CSC in csc box..
Flashing with home_csc won't cause data loss but its akin to a dirty flash .. causes problems and is there for upgrading android os without data loss, and its not generally a good thing to NOT wipe data and factory reset after flashing as it causes problems..
IF YOU INTEND TO DO A PROFESSIONAL RECOVERY OF YOUR DATA DON'T FLASH ANYTHING ANYMORE AS IT WILL FURTHER MAKE IT DIFFICULT TO RETRIEVE !
WARNING : combination rom would wipe all your data, so be warned if you flash it, it would be even more difficult to recover data ..
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
hmm i see,
well i guess i will just wait for a professional recovery service then, if they cant recover then i will just use this combination rom and try and fix the mobile so its usable again
Hi all, first time trying to flash a ROM and having difficulties.
I recently purchased a Tab A from Ebay and after a few weeks got round to using it, turned it on and it is saying that it needs the account it was setup with in order to finish the setup.
Tried messaging the seller but haven't got anywhere so thought I just wipe it to factory defaults and try again. But it says this cant be done as the FRP lock is enabled.
So did some reading and found out about Odin and flashing the ROM, so downloaded Odin3_v3.14.4, and ROM making sure it was the right version for my Tab, downloaded USB drivers, put Tab in download mode and loaded Odin running as Admin, loaded the AP file and clicked start then it just fails!!! No message comes up on the Tab just fails in Odin?
I have included log below so can someone please help me. I have screen captures to but cant find out how to add them here.
Thanks
Lee
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_T585XXU1APE8_CL7959249_QB9650311_REV00_user_low_ship_meta.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1005)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Leemond75 said:
Hi all, first time trying to flash a ROM and having difficulties.
I recently purchased a Tab A from Ebay and after a few weeks got round to using it, turned it on and it is saying that it needs the account it was setup with in order to finish the setup.
Tried messaging the seller but haven't got anywhere so thought I just wipe it to factory defaults and try again. But it says this cant be done as the FRP lock is enabled.
So did some reading and found out about Odin and flashing the ROM, so downloaded Odin3_v3.14.4, and ROM making sure it was the right version for my Tab, downloaded USB drivers, put Tab in download mode and loaded Odin running as Admin, loaded the AP file and clicked start then it just fails!!! No message comes up on the Tab just fails in Odin?
I have included log below so can someone please help me. I have screen captures to but cant find out how to add them here.
Thanks
Lee
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_T585XXU1APE8_CL7959249_QB9650311_REV00_user_low_ship_meta.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1005)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If you are getting the error blocked by FRP lock when flashing then that means you need to enable OEM unlocking which you cannot do since you can't get past the setup screen. You really do not have any option but to return it or message the seller
JJcoder said:
If you are getting the error blocked by FRP lock when flashing then that means you need to enable OEM unlocking which you cannot do since you can't get past the setup screen. You really do not have any option but to return it or message the seller
Click to expand...
Click to collapse
Hi JJcoder and thanks for the reply, I was hoping that you wasn't going to say that!
I cant get hold of the seller obv because they knew of this problem, going to have to just take it on the chin by the looks of it and a lesson learnt!!
Thanks again for the reply dude.
Lee
Leemond75 said:
Hi JJcoder and thanks for the reply, I was hoping that you wasn't going to say that!
I cant get hold of the seller obv because they knew of this problem, going to have to just take it on the chin by the looks of it and a lesson learnt!!
Thanks again for the reply dude.
Lee
Click to expand...
Click to collapse
There is one thing that you can try...
You have to find a combination firmware with the same bootloader version as your current one.
Then, Flash that combination firmware and then flash back to stock. It has worked on some other devices to bypass FRP.
The locked bootloader shouldn't block it because it is still Official firmware.
If that doesn't work then like I said you don't really have any other option...
JJcoder said:
The one thing you can try but is not guaranteed to work is...
Flash the combination firmware and then flash back to stock. It has worked on some other devices to bypass FRP.
The locked bootloader won't block it because it is still Official firmware.
If that doesn't work then like I said you don't really have any other option...
Click to expand...
Click to collapse
Okay thanks, willing to give anything a try at this point!
As I say I'm a newbee at this so could you tell me what I have to do please?
Leemond75 said:
Okay thanks, willing to give anything a try at this point!
As I say I'm a newbee at this so could you tell me what I have to do please?
Click to expand...
Click to collapse
Ok first download this Odin: https://forum.xda-developers.com/attachment.php?attachmentid=4952061
And then download this firmware: https://mega.nz/file/Ynow0S7B#mRuSS_qZUKzmRPQHwfVCRv1H09PCHtbu-8J_pqr5_b8
Then flash this firmware in the AP slot and make sure repartition is not enabled.
If you get an error than try this firmware: https://mega.nz/file/IyxlmSCK#MtyhDSad3a_xQypxAvLQU2nS0-RbapT0FvfOq_j27Zs
Then flash back to stock ROM and cross your fingers ?
Edit: If you can't boot into the combo firmware than you can do a factory reset in recovery.
JJcoder said:
Ok first download this Odin: https://forum.xda-developers.com/attachment.php?attachmentid=4952061
And then download this firmware: https://mega.nz/file/Ynow0S7B#mRuSS_qZUKzmRPQHwfVCRv1H09PCHtbu-8J_pqr5_b8
Then flash this firmware in the AP slot and make sure repartition is not enabled.
If you get an error than try this firmware: https://mega.nz/file/IyxlmSCK#MtyhDSad3a_xQypxAvLQU2nS0-RbapT0FvfOq_j27Zs
Then flash back to stock ROM and cross your fingers ?
Click to expand...
Click to collapse
Thanks so much dude, trying now!
Leemond75 said:
Thanks so much dude, trying now!
Click to expand...
Click to collapse
Tell me if it works!
Hi Please help
i have T585XXU6CTE6 (SM-T585, Samsung Tab A6 2016) Education Tab! (No play store, can’t install unknown source, not enable able)
i can’t open download mode (cannot install TWRP or Root)
can’t Factory reset even from recovery: MDM error
lock screen setting is disabled in setting no way to enable it! so i can't do factory reset using PIN Code error after 15 trial
every time i turn on developer option it disabled automatically once i leave About page
any suggestions??