Related
Alright, So I bought a brand-new Galaxy S4 i-9500 a couple of weeks back. Ever since day one, the phone has major problems working with my Sandisk Class 10 64gb sdxc card, which I was using in my Galaxy Note N7000, without any problems. The card also works perfect in my wife's Galaxy S3 i9300.
The problems include:
-> The phone showing card as "Damaged" and not mounting it.
-> Sometimes it mounts the card, but shows the card as 'Blank' or 'Wrongly Formatted'
-> And yet sometimes, it mounts the card, but does not read some specific files. Opening those will give a message which says "File format not supported". In the process, the phone heats up to pretty nasty levels, and the battery drain will be massive. The phone also becomes very slow, gets stuck, and sometimes even restarts, and the problem keeps continuing.
If I remove the memory card, the phone works like a charm. I tried a 16gb memory card which also produced more or less the same results.
Now, the real problem is this. Recently, I had tried to root the phone, and for that purpose, I tried flashing CWM from cofface, through ODIN 3.07 and 1.85. Both the times, the flashing process was successful, with ODIN giving the green "PASS" message. However, nothing seemed to change on my phone, and CWM was never installed. I could never get the CWM screen no matter what I tried (every instruction on the net, literally). I then left the matter.
When my aforementioned card problem bothered me a lot, today, I decided to re-flash the stock firmware to my phone. So I downloaded the stock ROM from Sammobile, the correct pit file from XDA and started the flash process. Flashing was successful, as shown by ODIN, and the phone rebooted. But to my horror, the phone was exactly in the same state, when I had switched it off. Nothing was ever changed, all my files and everything were intact, and nothing had happened at all!!!!
How is this possible??? The bootloader shows "Downloading" and the blue bar while flashing, ODIN shows everything and even says it succeeded, but then how come things on my Phone remains absolutely unchanged??? So then what did it re-flash and where to?? And is there any way to get rid of this memory card problem??
I googled a lot to see if anyone else is experiencing the same problem as mine, but never found anything, which leads me to believe that my device is one weird thing!
vivz990 said:
Alright, So I bought a brand-new Galaxy S4 i-9500 a couple of weeks back. Ever since day one, the phone has major problems working with my Sandisk Class 10 64gb sdxc card, which I was using in my Galaxy Note N7000, without any problems. The card also works perfect in my wife's Galaxy S3 i9300.
The problems include:
-> The phone showing card as "Damaged" and not mounting it.
-> Sometimes it mounts the card, but shows the card as 'Blank' or 'Wrongly Formatted'
-> And yet sometimes, it mounts the card, but does not read some specific files. Opening those will give a message which says "File format not supported". In the process, the phone heats up to pretty nasty levels, and the battery drain will be massive. The phone also becomes very slow, gets stuck, and sometimes even restarts, and the problem keeps continuing.
If I remove the memory card, the phone works like a charm. I tried a 16gb memory card which also produced more or less the same results.
Now, the real problem is this. Recently, I had tried to root the phone, and for that purpose, I tried flashing CWM from cofface, through ODIN 3.07 and 1.85. Both the times, the flashing process was successful, with ODIN giving the green "PASS" message. However, nothing seemed to change on my phone, and CWM was never installed. I could never get the CWM screen no matter what I tried (every instruction on the net, literally). I then left the matter.
When my aforementioned card problem bothered me a lot, today, I decided to re-flash the stock firmware to my phone. So I downloaded the stock ROM from Sammobile, the correct pit file from XDA and started the flash process. Flashing was successful, as shown by ODIN, and the phone rebooted. But to my horror, the phone was exactly in the same state, when I had switched it off. Nothing was ever changed, all my files and everything were intact, and nothing had happened at all!!!!
How is this possible??? The bootloader shows "Downloading" and the blue bar while flashing, ODIN shows everything and even says it succeeded, but then how come things on my Phone remains absolutely unchanged??? So then what did it re-flash and where to?? And is there any way to get rid of this memory card problem??
I googled a lot to see if anyone else is experiencing the same problem as mine, but never found anything, which leads me to believe that my device is one weird thing!
Click to expand...
Click to collapse
Same problem for me... i wanted reinstall the stock firmware completely but when i flashed it with ODIN nothing happened...
Markz88 said:
Same problem for me... i wanted reinstall the stock firmware completely but when i flashed it with ODIN nothing happened...
Click to expand...
Click to collapse
Odin doesnt wipe your device or delete anything of your data...
If you flash the same firmware with your device firmware then nothing's really happened..
But if you root or change anything to system - boot - recovery - modem partition then simply is going again to stock or to the version you flash..
Thanks
Maybe there is something wrong with flashing memory (emmc).
There is an app on play store to check it, but i dont know if it works on s4.
I suggest to replace your phone. Or send it to service center
Edit: flash another different stock firmware, and check pda and csc if has changed
sent from my galaxy
vivz990 said:
Alright, So I bought a brand-new Galaxy S4 i-9500 a couple of weeks back. Ever since day one, the phone has major problems working with my Sandisk Class 10 64gb sdxc card, which I was using in my Galaxy Note N7000, without any problems. The card also works perfect in my wife's Galaxy S3 i9300.
The problems include:
-> The phone showing card as "Damaged" and not mounting it.
-> Sometimes it mounts the card, but shows the card as 'Blank' or 'Wrongly Formatted'
-> And yet sometimes, it mounts the card, but does not read some specific files. Opening those will give a message which says "File format not supported". In the process, the phone heats up to pretty nasty levels, and the battery drain will be massive. The phone also becomes very slow, gets stuck, and sometimes even restarts, and the problem keeps continuing.
If I remove the memory card, the phone works like a charm. I tried a 16gb memory card which also produced more or less the same results.
Now, the real problem is this. Recently, I had tried to root the phone, and for that purpose, I tried flashing CWM from cofface, through ODIN 3.07 and 1.85. Both the times, the flashing process was successful, with ODIN giving the green "PASS" message. However, nothing seemed to change on my phone, and CWM was never installed. I could never get the CWM screen no matter what I tried (every instruction on the net, literally). I then left the matter.
When my aforementioned card problem bothered me a lot, today, I decided to re-flash the stock firmware to my phone. So I downloaded the stock ROM from Sammobile, the correct pit file from XDA and started the flash process. Flashing was successful, as shown by ODIN, and the phone rebooted. But to my horror, the phone was exactly in the same state, when I had switched it off. Nothing was ever changed, all my files and everything were intact, and nothing had happened at all!!!!
How is this possible??? The bootloader shows "Downloading" and the blue bar while flashing, ODIN shows everything and even says it succeeded, but then how come things on my Phone remains absolutely unchanged??? So then what did it re-flash and where to?? And is there any way to get rid of this memory card problem??
I googled a lot to see if anyone else is experiencing the same problem as mine, but never found anything, which leads me to believe that my device is one weird thing!
Click to expand...
Click to collapse
go to this link....
http://forum.xda-developers.com/showthread.php?t=2219803
get rooted from here ( even if u are)
in the same page u get a link to flash back to stock recovery. get that flashed
boot into stock recovery and get a factory reset done.
pull battery and back in...
turn on ur phone into download mode and flash ur stock rom using odin....
this is how i got mine working.... i had ur similar issue....
kiwimalayalee said:
go to this link....
http://forum.xda-developers.com/showthread.php?t=2219803
get rooted from here ( even if u are)
in the same page u get a link to flash back to stock recovery. get that flashed
boot into stock recovery and get a factory reset done.
pull battery and back in...
turn on ur phone into download mode and flash ur stock rom using odin....
this is how i got mine working.... i had ur similar issue....
Click to expand...
Click to collapse
ok..will try this now...my last resort
vivz990 said:
ok..will try this now...my last resort
Click to expand...
Click to collapse
i assure u its gonna work perfectly...
I am literally having the same problem on my S4 I337M, I'm gonna try what was suggested on here, maybe it'll work lol
i have exactly the same problem right now, i searched for a solution and i found ur thread.
going through the thread to see a solution
vivz990 said:
ok..will try this now...my last resort
Click to expand...
Click to collapse
was ur problem solved after flashing cf-auto_root? i mean were u then able to flash custom recovery via odin?
Is solved?
vivz990 said:
... I decided to re-flash the stock firmware to my phone. So I downloaded the stock ROM from Sammobile, the correct pit file from XDA and started the flash process. Flashing was successful, as shown by ODIN, and the phone rebooted. But to my horror, the phone was exactly in the same state, when I had switched it off. Nothing was ever changed, all my files and everything were intact, and nothing had happened at all!!!!
How is this possible??? The bootloader shows "Downloading" and the blue bar while flashing, ODIN shows everything and even says it succeeded, but then how come things on my Phone remains absolutely unchanged??? So then what did it re-flash and where to?? And is there any way to get rid of this memory card problem??
I googled a lot to see if anyone else is experiencing the same problem as mine, but never found anything, which leads me to believe that my device is one weird thing!
Click to expand...
Click to collapse
OMG. I just experienced the EXACT same issue with a Galaxy Exhibit (MetroPCS) SGH-T599. I picked up this phone 2nd hand. It has Philz Touch v6.25 recovery already installed on it. But the phone is stuck in a boot loop. So I decided to flash the stock ROM, a custom ROM via ODIN and later even via flashable zips from the Philz recovery! I even tried to flash TWRP to replace Philz Touch thinking there was something wrong with Philz recovery.
No matter what I did, EVERY TIME, the phone remained in EXACTLY the same state, i.e., with Philz recovery still on there.
I have searched everywhere for the last 3 days including XDA but never found anyone else with the same ODIN flashing issue. Thank goodness I found your post. I'm reading the thread now looking for a solution.
I've noticed a couple other things beneath the surface. When I flashed a CM custom ROM for the phone, the default.prop indicated that there was a new system on the phone (I can access the phone via ADB and look at the files including the system files). It also appears the phone was rooted by the previous owner. Another thing I noticed is that some cases when I tried to install a custom ROM via the custom recovery, the phone would suddenly reboot just at the point the recovery attempts to write the ROM.
Yes, it is clear the phone is good and bricked. But how on earth to unbrick it if ODIN isn't actually changing ANYTHING on the phone and installing a ROM via Philz recovery changes little to nothing either.
CVAngelo said:
OMG. I just experienced the EXACT same issue with a Galaxy Exhibit (MetroPCS) SGH-T599. I picked up this phone 2nd hand. It has Philz Touch v6.25 recovery already installed on it. But the phone is stuck in a boot loop. So I decided to flash the stock ROM, a custom ROM via ODIN and later even via flashable zips from the Philz recovery! I even tried to flash TWRP to replace Philz Touch thinking there was something wrong with Philz recovery.
No matter what I did, EVERY TIME, the phone remained in EXACTLY the same state, i.e., with Philz recovery still on there.
I have searched everywhere for the last 3 days including XDA but never found anyone else with the same ODIN flashing issue. Thank goodness I found your post. I'm reading the thread now looking for a solution.
I've noticed a couple other things beneath the surface. When I flashed a CM custom ROM for the phone, the default.prop indicated that there was a new system on the phone (I can access the phone via ADB and look at the files including the system files). It also appears the phone was rooted by the previous owner. Another thing I noticed is that some cases when I tried to install a custom ROM via the custom recovery, the phone would suddenly reboot just at the point the recovery attempts to write the ROM.
Yes, it is clear the phone is good and bricked. But how on earth to unbrick it if ODIN isn't actually changing ANYTHING on the phone and installing a ROM via Philz recovery changes little to nothing either.
Click to expand...
Click to collapse
Totaly same problem with my Galaxy Note 10.1 (N8010). Tried flash stock ROM over Odin a totaly nothing changed. It is in bootloop everytime with totaly same Marshmallow logo, even if I flash stock ROM which is KitKat... Only sometime it boot to system where it say to me "Encryption unssucessfull" - WTF? i never have password, and when i click on something it just reboot to BootLoop...
I have TWRP recovery on it, but when i want to flash some ROM it flash it but nothing change... Maybe EMMC memory chip is death or I dont know...
Fellas, try on other PC/Laptop or reinstal Windows/Ubuntu whatever you use... That helped me..
So I recently purchased my AT&T Galaxy S4 with MDL baseband. I rooted and installed TWRP via motochopper. I then loaded Kangabean 4.2.2 and everything was great. Got notification for OTA update to 4.3 and decided might as well load Kangabean 4.3 as opposed to dealing with the OTA notification. I did so (after formatting internal SD and performing factory reset) and now my phone won't boot beyond the Galaxy S4 splash screen. I restored a nandroid backup of the original software and was able to boot the phone once, but couldn't load the custom rom again, nor can i load into the stock rom anymore either. Does it sound like my phone may have a hardware failure? Would attempting to restore through odin be the next logical step? I'm by no means an expert with these sort of things but my S2 has never given me any sort of grief when flashing various roms in the past. Any advice would be greatly appreciated. Thanks in advance!
Try a different kernel, also, pull the battery for 5 min, it will boot.
TheAxman said:
Try a different kernel, also, pull the battery for 5 min, it will boot.
Click to expand...
Click to collapse
Yeah I left the phone off with the battery removed all night - didn't want to boot this morning. I'm also noticing an oddity with TWRP - it's for some reason asking for a password on startup even though I've never set one. It also gives an error when attempting to wipe the phone or re-flash
id try odin
Don't Odin yet. If you can get into recovery see if you can flash a new recovery onto the phone. Try this http://forum.xda-developers.com/showthread.php?p=41746967
jd1639 said:
Don't Odin yet. If you can get into recovery see if you can flash a new recovery onto the phone. Try this http://forum.xda-developers.com/showthread.php?p=41746967
Click to expand...
Click to collapse
It will not let you past the password, been there, it will only do simulated flashes.
Odin is his only option.
So I managed to flash back to stock with odin. I was then able to re-root and re-install recovery. Something is still wrong here though. I was able to load kangabean 4.3, but when i installed the SIM card (kept it out to prevent OTA updates) the phone would no longer boot. I then re-flashed with odin, re-rooted, installed sim, THEN loaded the rom and it worked.... For a while. I had the phone plugged in to my laptop as i had recently transferred some ringtones to the internal SD. I powered down the phone. It seemed to shut the OS down but it then displayed a battery symbol with a rotating circular animation, as if it was trying to show that it was charging the battery. The phone froze in this state.
Another thing that I've noticed is that when this phone freezes, it gets warm. It also tends not to respond well until i've let it cool down. I'm now having difficulty booting the phone after re-flashing with odin. It loads to the white screen with AT&T logo and hangs (and gets warm). I plan to leave the phone alone with battery removed for the day and attempt to reboot or re-flash with odin later.
I find it odd that the rom that i flashed would stop working if i've flashed the rom with the sim removed from the phone, then introduced the sim to the phone after the flash is complete. Is this normal? I'm also unsure if my phone has faulty hardware, or maybe there's some sort of software glitch that's causing it to hang and overhead (like an infinite loop caused by faulty software).
I think if / when I can get it working with the stock rom again, I'll root it and run it for a while and see what it does. I never intended to run this phone with the stock rom as I prefer vanilla android.
I'm wondering if there's something wrong with the kernel. Perhaps I should re-download the ROM and re-install it. I'm not sure but I think the kernel is responsible for charging issues. Perhaps a bad kernel WOULD explain why the phone sometimes freezes at the "battery charging" logo? I'm somewhat at a loss as to what to do. I could try exchanging it through AT&T. If so, I hope they nave another one in their stock that has the MDL baseband as I know I'd be screwed with the current one...
Squidbert said:
So I managed to flash back to stock with odin. I was then able to re-root and re-install recovery. Something is still wrong here though. I was able to load kangabean 4.3, but when i installed the SIM card (kept it out to prevent OTA updates) the phone would no longer boot. I then re-flashed with odin, re-rooted, installed sim, THEN loaded the rom and it worked.... For a while. I had the phone plugged in to my laptop as i had recently transferred some ringtones to the internal SD. I powered down the phone. It seemed to shut the OS down but it then displayed a battery symbol with a rotating circular animation, as if it was trying to show that it was charging the battery. The phone froze in this state.
Another thing that I've noticed is that when this phone freezes, it gets warm. It also tends not to respond well until i've let it cool down. I'm now having difficulty booting the phone after re-flashing with odin. It loads to the white screen with AT&T logo and hangs (and gets warm). I plan to leave the phone alone with battery removed for the day and attempt to reboot or re-flash with odin later.
I find it odd that the rom that i flashed would stop working if i've flashed the rom with the sim removed from the phone, then introduced the sim to the phone after the flash is complete. Is this normal? I'm also unsure if my phone has faulty hardware, or maybe there's some sort of software glitch that's causing it to hang and overhead (like an infinite loop caused by faulty software).
I think if / when I can get it working with the stock rom again, I'll root it and run it for a while and see what it does. I never intended to run this phone with the stock rom as I prefer vanilla android.
I'm wondering if there's something wrong with the kernel. Perhaps I should re-download the ROM and re-install it. I'm not sure but I think the kernel is responsible for charging issues. Perhaps a bad kernel WOULD explain why the phone sometimes freezes at the "battery charging" logo? I'm somewhat at a loss as to what to do. I could try exchanging it through AT&T. If so, I hope they nave another one in their stock that has the MDL baseband as I know I'd be screwed with the current one...
Click to expand...
Click to collapse
TheAxman said:
Try a different kernel, also, pull the battery for 5 min, it will boot.
Click to expand...
Click to collapse
//
Squidbert said:
.
Another thing that I've noticed is that when this phone freezes, it gets warm. It also tends not to respond well until i've let it cool down. I'm now having difficulty booting the phone after re-flashing with odin. It loads to the white screen with AT&T logo and hangs (and gets warm). I plan to leave the phone alone with battery removed for the day and attempt to reboot or re-flash with odin later.
Click to expand...
Click to collapse
If you're on the stock AT&T rom and you're getting stuck on the AT&T boot logo try the following:
Power off your phone and hold down Volume Up, Center Home, and Power buttons together.
Once you see the Galaxy S4 splash - Keep holding down Volume Up and Center Home buttons but let go of Power button.
Choose the wipe datafactory reset. This will wipe your phone completely but it should boot after.
Hope that helps.
Well I've been toying around with this thing and much to my surprise, I have CM10 running stable w/o any issues booting! I think I would prefer to run Kangabean 2.05 (android 4.3) though. Assuming that the kernel could be a likely cause of the OS not booting, could someone recommend a suitable kernel for that rom? It appears to come packaged with the "KT" kernel...
Another thought i had was perhaps TWRP wasn't adding the loki feature to the roms that i was trying. I upgraded from 2.5x to 2.6. Hasn't seemed to have made a noticeable difference though.
Would the fact that CM10 runs absolutely flawlessly with no issues booting at all possibly help narrow down why the other roms that I'm flashing only load up the first time but fail at the "Galaxy S4" splash screen on subsequent reboots? Admittedly I'm a relative noob to roms and such but up until now i've been able to muddle my way through things and eventually figure them out. I'm not having the greatest luck with this one!
Squidbert said:
Well I've been toying around with this thing and much to my surprise, I have CM10 running stable w/o any issues booting! I think I would prefer to run Kangabean 2.05 (android 4.3) though. Assuming that the kernel could be a likely cause of the OS not booting, could someone recommend a suitable kernel for that rom? It appears to come packaged with the "KT" kernel...
Another thought i had was perhaps TWRP wasn't adding the loki feature to the roms that i was trying. I upgraded from 2.5x to 2.6. Hasn't seemed to have made a noticeable difference though.
Would the fact that CM10 runs absolutely flawlessly with no issues booting at all possibly help narrow down why the other roms that I'm flashing only load up the first time but fail at the "Galaxy S4" splash screen on subsequent reboots? Admittedly I'm a relative noob to roms and such but up until now i've been able to muddle my way through things and eventually figure them out. I'm not having the greatest luck with this one!
Click to expand...
Click to collapse
TWRP does not now and has never added LOKI to any ROM or Kernel. Only OUDHS CWM auto-LOKIs. You have to use A pre-LOKIed Kernel or flash the LOKI DokI script to LOKI anything with TWRP. You can do a search to find the LOKI DOKI script and how to use it.
fatah
hi my phone is galaxy s4 at&t i337 rooted but not installed recovery the phone was working good suddenly i deleted at&t software updater after that the phone rebooted it's self and then stuck in at&t boot logo won't bootup please help
TheAxman said:
Try a different kernel, also, pull the battery for 5 min, it will boot.
Click to expand...
Click to collapse
galaxy s4 i337 stuck on at&t bootAnimation
i tried everything but still same please help my phone is not booting up
fatahmusse said:
i tried everything but still same please help my phone is not booting up
Click to expand...
Click to collapse
Flash the stock firmware.
samsung galaxy s4 i337
thank you i flashed to mf3 everything is ok
fatahmusse said:
thank you i flashed to mf3 everything is ok
Click to expand...
Click to collapse
Glad to hear
What's currently happening is my phone will boot and work normally except it appears the radio is not working then after 60-120 seconds freeze for a second then reboot. Wifi does work but I just see an x for the cell network signal and if I take out the SIM I get no notification. Curiously if I'm using the camera it seems to delay the rebooting by a few minutes.
I've tried http://forum.xda-developers.com/showthread.php?t=2432476 LG G2 Stock Firmware (Go Back to Stock) to no success, I was able to flash, it removed TWRP but I get the same symptoms anyway.
I've tried flashing the Rogers modem and this did not make a difference.
When I noticed this problem was when I was installing/testing some xposed modules, although it seems strange that they could break the phone in this way.
I've run out of ideas and although my phone isn't bricked per say it's near useless if it's going to reboot every minute or two. The phone doesn't reboot if I leave it in download mode or TWRP so this makes me think there's some hope.
Assuming it's not against the rules I'll PayPal anyone who comes up with the fix $50 CAD because right now I'm hooped.
Did you download and try flashing the exposed disabler zip file?
Sent from my LG-D803 using XDA Premium 4 mobile app
Of course there is hope!
All you gotta do is just download this ROM...
http://forum.xda-developers.com/showthread.php?t=2451592
Download it with your PC, then connect your phone to the PC to transfer the file.
The TWRP and flash it and that should fix it all.
Good luck
Do you have a gmail widget on your lockscreen? (Was worth a shot since others have reported varying issues with gmail widgets on the lockscreen).
I lost my recovery when I tried to go back to stock, and I can't seem to install any apps. I'm trying "upgrade recovery" from the LG Mobile Support Tool to see if that works. Otherwise I guess I have to find out how to root and flash a recovery entirely over ADB
I was able to restore the stock recovery and factory reset but that still didn't resolve the issue. Can someone provide a /system/ partition dump of a d803? I'm assuming there's something broken in there but I don't think flashing a ROM will solve that since flashing stock didn't seem to.
mrsocksfox said:
I was able to restore the stock recovery and factory reset but that still didn't resolve the issue. Can someone provide a /system/ partition dump of a d803? I'm assuming there's something broken in there but I don't think flashing a ROM will solve that since flashing stock didn't seem to.
Click to expand...
Click to collapse
If flashing to stock didn't work then your phone may as well be defective...
crzykiller said:
If flashing to stock didn't work then your phone may as well be defective...
Click to expand...
Click to collapse
It's not a paperweight yet, I can adb. I rooted it through adb I'm just not sure what the xposed module broke. It has to be something that persists across flashing stock but I don't have anything to compare against.
EFS. Flash or push your backed up EFS.
Steamer86 said:
EFS. Flash or push your backed up EFS.
Click to expand...
Click to collapse
I don't have one. I made a backup in TWRP but ended up losing it when trying to fix things :silly:. I believe I can still see my IMEI if that's any sign of things not being completely ****ed.
Hi I have LG G2 D802 . My problem is that my phone hangs a lot . I did hard reset but problem didnt go. After hard reset i tried to install custom built rom but still same problem. Then I re installed lolipop 5.0.2 still the same problem .. now
i have downgraded to kitkat and again same problem .. Even now when it hangs It turn off completely like it got bricked or something but it work some time and again after some use it hang.. now i have hardreset my device and putted on standby mood but phone was working fine after some use phone hanged again . I dont understand what is the problem with my LG G2
I am having the exact same problem on stock 4.4.2 with my D803. I have random reboots every few minutes. I suspect it is a hardware issue since the problem persisted even after returning to stock using kdz. Unfortunately, I don't have an EFS backup.
I have tried multiple other ROMS (CM12.1, DU, Cloudy 3.2 and 3.3) and all are even less usable than stock (reboots while I am doing the initial setup).
Any suggestions? I don't know what else to try and am ready to buy a new phone now as this G2 is basically unusable... I'd greatly appreciate any help.
mrsocksfox said:
It's not a paperweight yet, I can adb. I rooted it through adb I'm just not sure what the xposed module broke. It has to be something that persists across flashing stock but I don't have anything to compare against.
Click to expand...
Click to collapse
If you have restored it to stock ....... and you still have the problem, u may have a short somewhere in the phone. The only thing that remains the same is the hardware .... u have changed the software
I have had the s7 edge for a while. I root it and change the rom to superman rom. I made several formatting, installed xposed, uninstalled xposed, installed again ... I changed several times of rom (Superman Rom, King Rom). I alternate between stock and custom.
I do not remember when the crashes started but I tried to format the sd card, it did not work, I tried to take the sd card, it did not work. I formatted the cell phone several times, put up stock MM, it did not work. Now it is stocked Nougat and it continues the same thing. It locks up and has to restart, when it hangs fully - like now - I have to wait until the battery zeroes and plug the charger back to life.
Yesterday it gave a drizzle on the screen and a noise of interefencia and locked everything and then I tried to restart and I could not, it was when a warning appeared on the screen;
Bootloader Exception, etc ....
In another forum I was told that the problem is in a piece called flash memory, only changing it that this problem will stop. What do you think?
someone?
You need to flash your stock bootloader and modem via Oden
Redbeard8 said:
You need to flash your stock bootloader and modem via Oden
Click to expand...
Click to collapse
you kiddin, right?
I already did that a hundred times
[My phone is already repaired by Samsung under warranty, my internal storage was broken so they replaced the motherboard. There is no need to reply to this thread anymore. Thanks anyway]
Hello everyone, I need help!!!!
Today my Samsung GS6 Edge+ died. (At least, that's what I think)
I own my G928F for 1,5 years now. I rooted it two weeks after that. Several weeks ago I flashed a new ROM called N-Lite Nougat v4.1 which has worked smoothly and without any problems since I've flashed it.
However, today, the 26th of June, my phone turned off all of a sudden while scrolling through Facebook. I haven't flashed, installed nor done, anything that would affect my phone in such a way that it would crash this way. I tried force rebooting with the 3 buttons pressed (Home, Vol+, On/Off) several times. My phone just boots into the ROM and then freezes instantly. Again tried force rebooting for like 5 times, NO luck. Then I tried booting into recovery mode (TWRP 3.1.0.0), cleared Dalvik and cache, factory reset, rebooted, still no luck. Tried several other custom ROM's, still NO luck. Also tried flashing stock Samsung Firmware using ODIN, no luck whatsoever.
I couldn't find any similar problems in the ROM thread, nor anywhere else on the internet. Besides that, I'm starting to think this problem is a defect to the hardware, not the software.
Does anyone know what would be the best thing to do in my situation? Or perhaps anyone who might know what the problem might be and have a possible solution?
Thanks in Advance.
Recovery mode (TWRP 3.1.0.0) is accessible though, but that's all. While trying to install another ROM it just reboots randomly, during flashing progress.
When you say you tried flashing stock rom with ODIN, does it fail or does it succeed but freezes up when you are back in android OS?
kdogguk said:
When you say you tried flashing stock rom with ODIN, does it fail or does it succeed but freezes up when you are back in android OS?
Click to expand...
Click to collapse
It succeeds. But when it's done it just keeps going in a bootloop. It doesn't even boot into Android now. I've used the right settings in Odin. Even tried several different versions of Odin. No success
Larss97 said:
It succeeds. But when it's done it just keeps going in a bootloop. It doesn't even boot into Android now. I've used the right settings in Odin. Even tried several different versions of Odin. No success
Click to expand...
Click to collapse
Out of curiosity, when you flashed the stock Rom was it 6.0.1 or 7.0?
Does it just get stuck on the S6 EDGE + screen for a while? If so you might be to impatient as first boot on almost all roms both custom or stock take a while to boot up. If it shows the Samsung splash screen over and over then yes it's bootlooping.
I can't think of any other reason for it bootlooping, especially if you have flashed a stock Rom, unless maybe you flashed 7.0 rom and still have a 6.0.1 bootloader. But I think that just causes loss of baseband, not a bootloop.
I would suggest another kernel, but that is normally included in the stock rom.
Do you download them from sammobile or another site? If it's another site, is it a reliable site?
kdogguk said:
Out of curiosity, when you flashed the stock Rom was it 6.0.1 or 7.0?
Does it just get stuck on the S6 EDGE + screen for a while? If so you might be to impatient as first boot on almost all roms both custom or stock take a while to boot up. If it shows the Samsung splash screen over and over then yes it's bootlooping.
I can't think of any other reason for it bootlooping, especially if you have flashed a stock Rom, unless maybe you flashed 7.0 rom and still have a 6.0.1 bootloader. But I think that just causes loss of baseband, not a bootloop.
I would suggest another kernel, but that is normally included in the stock rom.
Do you download them from sammobile or another site? If it's another site, is it a reliable site?
Click to expand...
Click to collapse
It was Android 7.0. I downloaded it from Sammobile. I've waited 40 minutes for it to boot up after successful Odin flash. But it just kept doing the same thing. The bootloader that was installed was a 7.0 bootloader. First i get the Samsung Galaxy S6 Edge + screen then the Samsung boot animation and it repeats for hours untill battery runs out haha
Larss97 said:
It was Android 7.0. I downloaded it from Sammobile. I've waited 40 minutes for it to boot up after successful Odin flash. But it just kept doing the same thing. The bootloader that was installed was a 7.0 bootloader. First i get the Samsung Galaxy S6 Edge + screen then the Samsung boot animation and it repeats for hours untill battery runs out haha
Click to expand...
Click to collapse
The last thing I can think of was did you get the right rom for your phone? 928F or 928T etc.
Other than that it might be a trip to the repair centre I'm afraid.
Larss97 said:
It was Android 7.0. I downloaded it from Sammobile. I've waited 40 minutes for it to boot up after successful Odin flash. But it just kept doing the same thing. The bootloader that was installed was a 7.0 bootloader. First i get the Samsung Galaxy S6 Edge + screen then the Samsung boot animation and it repeats for hours untill battery runs out haha
Click to expand...
Click to collapse
Try to do a factory reset in the stock recovery. It might help.
vishnu8058 said:
Try to do a factory reset in the stock recovery. It might help.
Click to expand...
Click to collapse
Done that, no success
kdogguk said:
The last thing I can think of was did you get the right rom for your phone? 928F or 928T etc.
Other than that it might be a trip to the repair centre I'm afraid.
Click to expand...
Click to collapse
Yeah i got the right rom for my phone. I've already sent it to a certified Samsung repair centre, it's still under warranty. Thanks for the help anyway