So I recently purchased my AT&T Galaxy S4 with MDL baseband. I rooted and installed TWRP via motochopper. I then loaded Kangabean 4.2.2 and everything was great. Got notification for OTA update to 4.3 and decided might as well load Kangabean 4.3 as opposed to dealing with the OTA notification. I did so (after formatting internal SD and performing factory reset) and now my phone won't boot beyond the Galaxy S4 splash screen. I restored a nandroid backup of the original software and was able to boot the phone once, but couldn't load the custom rom again, nor can i load into the stock rom anymore either. Does it sound like my phone may have a hardware failure? Would attempting to restore through odin be the next logical step? I'm by no means an expert with these sort of things but my S2 has never given me any sort of grief when flashing various roms in the past. Any advice would be greatly appreciated. Thanks in advance!
Try a different kernel, also, pull the battery for 5 min, it will boot.
TheAxman said:
Try a different kernel, also, pull the battery for 5 min, it will boot.
Click to expand...
Click to collapse
Yeah I left the phone off with the battery removed all night - didn't want to boot this morning. I'm also noticing an oddity with TWRP - it's for some reason asking for a password on startup even though I've never set one. It also gives an error when attempting to wipe the phone or re-flash
id try odin
Don't Odin yet. If you can get into recovery see if you can flash a new recovery onto the phone. Try this http://forum.xda-developers.com/showthread.php?p=41746967
jd1639 said:
Don't Odin yet. If you can get into recovery see if you can flash a new recovery onto the phone. Try this http://forum.xda-developers.com/showthread.php?p=41746967
Click to expand...
Click to collapse
It will not let you past the password, been there, it will only do simulated flashes.
Odin is his only option.
So I managed to flash back to stock with odin. I was then able to re-root and re-install recovery. Something is still wrong here though. I was able to load kangabean 4.3, but when i installed the SIM card (kept it out to prevent OTA updates) the phone would no longer boot. I then re-flashed with odin, re-rooted, installed sim, THEN loaded the rom and it worked.... For a while. I had the phone plugged in to my laptop as i had recently transferred some ringtones to the internal SD. I powered down the phone. It seemed to shut the OS down but it then displayed a battery symbol with a rotating circular animation, as if it was trying to show that it was charging the battery. The phone froze in this state.
Another thing that I've noticed is that when this phone freezes, it gets warm. It also tends not to respond well until i've let it cool down. I'm now having difficulty booting the phone after re-flashing with odin. It loads to the white screen with AT&T logo and hangs (and gets warm). I plan to leave the phone alone with battery removed for the day and attempt to reboot or re-flash with odin later.
I find it odd that the rom that i flashed would stop working if i've flashed the rom with the sim removed from the phone, then introduced the sim to the phone after the flash is complete. Is this normal? I'm also unsure if my phone has faulty hardware, or maybe there's some sort of software glitch that's causing it to hang and overhead (like an infinite loop caused by faulty software).
I think if / when I can get it working with the stock rom again, I'll root it and run it for a while and see what it does. I never intended to run this phone with the stock rom as I prefer vanilla android.
I'm wondering if there's something wrong with the kernel. Perhaps I should re-download the ROM and re-install it. I'm not sure but I think the kernel is responsible for charging issues. Perhaps a bad kernel WOULD explain why the phone sometimes freezes at the "battery charging" logo? I'm somewhat at a loss as to what to do. I could try exchanging it through AT&T. If so, I hope they nave another one in their stock that has the MDL baseband as I know I'd be screwed with the current one...
Squidbert said:
So I managed to flash back to stock with odin. I was then able to re-root and re-install recovery. Something is still wrong here though. I was able to load kangabean 4.3, but when i installed the SIM card (kept it out to prevent OTA updates) the phone would no longer boot. I then re-flashed with odin, re-rooted, installed sim, THEN loaded the rom and it worked.... For a while. I had the phone plugged in to my laptop as i had recently transferred some ringtones to the internal SD. I powered down the phone. It seemed to shut the OS down but it then displayed a battery symbol with a rotating circular animation, as if it was trying to show that it was charging the battery. The phone froze in this state.
Another thing that I've noticed is that when this phone freezes, it gets warm. It also tends not to respond well until i've let it cool down. I'm now having difficulty booting the phone after re-flashing with odin. It loads to the white screen with AT&T logo and hangs (and gets warm). I plan to leave the phone alone with battery removed for the day and attempt to reboot or re-flash with odin later.
I find it odd that the rom that i flashed would stop working if i've flashed the rom with the sim removed from the phone, then introduced the sim to the phone after the flash is complete. Is this normal? I'm also unsure if my phone has faulty hardware, or maybe there's some sort of software glitch that's causing it to hang and overhead (like an infinite loop caused by faulty software).
I think if / when I can get it working with the stock rom again, I'll root it and run it for a while and see what it does. I never intended to run this phone with the stock rom as I prefer vanilla android.
I'm wondering if there's something wrong with the kernel. Perhaps I should re-download the ROM and re-install it. I'm not sure but I think the kernel is responsible for charging issues. Perhaps a bad kernel WOULD explain why the phone sometimes freezes at the "battery charging" logo? I'm somewhat at a loss as to what to do. I could try exchanging it through AT&T. If so, I hope they nave another one in their stock that has the MDL baseband as I know I'd be screwed with the current one...
Click to expand...
Click to collapse
TheAxman said:
Try a different kernel, also, pull the battery for 5 min, it will boot.
Click to expand...
Click to collapse
//
Squidbert said:
.
Another thing that I've noticed is that when this phone freezes, it gets warm. It also tends not to respond well until i've let it cool down. I'm now having difficulty booting the phone after re-flashing with odin. It loads to the white screen with AT&T logo and hangs (and gets warm). I plan to leave the phone alone with battery removed for the day and attempt to reboot or re-flash with odin later.
Click to expand...
Click to collapse
If you're on the stock AT&T rom and you're getting stuck on the AT&T boot logo try the following:
Power off your phone and hold down Volume Up, Center Home, and Power buttons together.
Once you see the Galaxy S4 splash - Keep holding down Volume Up and Center Home buttons but let go of Power button.
Choose the wipe datafactory reset. This will wipe your phone completely but it should boot after.
Hope that helps.
Well I've been toying around with this thing and much to my surprise, I have CM10 running stable w/o any issues booting! I think I would prefer to run Kangabean 2.05 (android 4.3) though. Assuming that the kernel could be a likely cause of the OS not booting, could someone recommend a suitable kernel for that rom? It appears to come packaged with the "KT" kernel...
Another thought i had was perhaps TWRP wasn't adding the loki feature to the roms that i was trying. I upgraded from 2.5x to 2.6. Hasn't seemed to have made a noticeable difference though.
Would the fact that CM10 runs absolutely flawlessly with no issues booting at all possibly help narrow down why the other roms that I'm flashing only load up the first time but fail at the "Galaxy S4" splash screen on subsequent reboots? Admittedly I'm a relative noob to roms and such but up until now i've been able to muddle my way through things and eventually figure them out. I'm not having the greatest luck with this one!
Squidbert said:
Well I've been toying around with this thing and much to my surprise, I have CM10 running stable w/o any issues booting! I think I would prefer to run Kangabean 2.05 (android 4.3) though. Assuming that the kernel could be a likely cause of the OS not booting, could someone recommend a suitable kernel for that rom? It appears to come packaged with the "KT" kernel...
Another thought i had was perhaps TWRP wasn't adding the loki feature to the roms that i was trying. I upgraded from 2.5x to 2.6. Hasn't seemed to have made a noticeable difference though.
Would the fact that CM10 runs absolutely flawlessly with no issues booting at all possibly help narrow down why the other roms that I'm flashing only load up the first time but fail at the "Galaxy S4" splash screen on subsequent reboots? Admittedly I'm a relative noob to roms and such but up until now i've been able to muddle my way through things and eventually figure them out. I'm not having the greatest luck with this one!
Click to expand...
Click to collapse
TWRP does not now and has never added LOKI to any ROM or Kernel. Only OUDHS CWM auto-LOKIs. You have to use A pre-LOKIed Kernel or flash the LOKI DokI script to LOKI anything with TWRP. You can do a search to find the LOKI DOKI script and how to use it.
fatah
hi my phone is galaxy s4 at&t i337 rooted but not installed recovery the phone was working good suddenly i deleted at&t software updater after that the phone rebooted it's self and then stuck in at&t boot logo won't bootup please help
TheAxman said:
Try a different kernel, also, pull the battery for 5 min, it will boot.
Click to expand...
Click to collapse
galaxy s4 i337 stuck on at&t bootAnimation
i tried everything but still same please help my phone is not booting up
fatahmusse said:
i tried everything but still same please help my phone is not booting up
Click to expand...
Click to collapse
Flash the stock firmware.
samsung galaxy s4 i337
thank you i flashed to mf3 everything is ok
fatahmusse said:
thank you i flashed to mf3 everything is ok
Click to expand...
Click to collapse
Glad to hear
Related
Hi all,
I recently installed the newest build of Slimbean. I am having a few issues: I am unable to play any media... Music, videos (youtube). My phone app does not work. I cannot receive nor send any calls. And my phone produces no sounds at all.
I tried installing build 7 to see if it was an issue with the build I was using... didn't help.
Internet and wifi work without any problems.
Galaxy S4 i337m
Baseband: I337MUMUAMDL
Version: Slim-4.2.2.build.7-OFFICIAL
Build #: slim_jfltecan-userdebug 4.2.2 JDQ39E eng.blk_jack.20130706.15730 test-keys
Any ideas?
Thanks in advance
Update: Any ROM I install... Phone and sounds do not work.
Talabis said:
Update: Any ROM I install... Phone and sounds do not work.
Click to expand...
Click to collapse
I'd Odin back to stock and see if you still have the issue. If you do it's a hardware issue.
jd1639 said:
I'd Odin back to stock and see if you still have the issue. If you do it's a hardware issue.
Click to expand...
Click to collapse
I did just that... But it's a bit of a story.
I had just fixed another problem I was having yesterday. Was getting stuck at the S4 splash screen right after powering on the phone. The problem was caused by TWRP 2.6 and formatting /data partition. Long story short, I installed CWM and used it to do a full wipe/format of partitions and then was able to install ROMs, restore backups without issue.
So today, since everything was working, I decided to flash a new custom ROM (which I installed) and the MG1 radio. Wasn't having any luck with the radio. Finally, I was able to flash a radio via mobile odin, but then I soft bricked my phone. Got stuck at the S4 splash screen (same issue I had yesterday, but this time, a different cause). So was troubleshooting it all day. Tried to go back to stock, no luck. Tried to restore the stock backup I had, no luck. Only thing I could do was install custom ROMs at this point to get into my phone (i.e. Slimbean, FoxHound, etc...). But, at this point, although I could boot into Android, I had no sound at all and couldn't play video. So after hours of trial and error, I installed CWM again (replacing TWRP 2.5.0.2), did a full wipe/format and tried to install a stock ROM. No luck. Still was hanging at the S4 splash screen. Then I tried to install this ROM again which I had luck with in the past; |ROM| |★VLUAMG1★| |CANADIAN||i337M||STOCK||ROOTED||July.26.13|. But his instructions said to install a wifi fix or fear soft bricking my phone. So I installed the wifi fix, but selected the wrong file (I know, stupid. Done a lot of stupid **** in the past couple days with this phone). Now, after the phone rebooted, I would see the S4 splash screen for a split second, and it would auto load into download (odin) mode. Couldn't get into recovery at all. So then I decided to flash one of the stock ROMs I tried earlier that didn't work, but this time, SUCCESS!!!!! Phone was booting and all sounds worked. I could make/receive phone calls as well... Everything seems to be working fine now. I find it funny that flashing a wifi fix that I shouldn't have seems to have fixed my issue in a sense. Since it allowed me to successfully flash a stock ROM. So I am making a backup of the stock ROM and will decide what I'm going to do from here.
Holy goalie!!! It's been a very vexing couple of days.
Nice that you got it all worked out, I've found out that if your "status" is custom, it will sometimes give you problems when flashing a "stock" rom via odin.
So what I always do when reverting back to the stock rom, I use triangle away to clear the flash count and make my phone back to "Official". If you want the steps to do this, let me know, it's not hard, but there are crucial steps to get this right!
JP
I have scoured the internet to find someone with the same issue as me, and I haven't found enough to fix the issue, so I'm placing a plea for help here. I have installed TWRP 2.6 recovery, and I am trying to flash OmniRom 4.4.2 nightlies. Originially I was trying to flash cyanogenmod 11, but I had this same problem. It appears to be any kit kat rom that causes the problem (I haven't tried flashing stock or any non-kitkat roms, but I was running on rooted stock before I tried to flash CM11). Anyways, When I flash I am wiping dalvik, cached, system, and data. Then flashing the rom, then flashing Paranoid android gapps. It will boot the first time fine. My phone will work just fine afterwards. However, if my battery dies or I restart, I will be unable to boot back into the rom and my phone becomes a soft brick. It will just stay stuck at the galaxy s 4 logo for as long as I leave it on. I have left it on for more than 30 minutes and there are no changes. I can't have my phone being just a dead battery away from being bricked, so I am asking for your help! Anything is much appreciated!
One other side note: I had my phone just lock up on me once in the middle of it running just fine. Afterwards it turned off on its own and tried to restart, but it resulted in the same issue. I don't know if this is related or just a bug in the rom.
schmidty455 said:
I have scoured the internet to find someone with the same issue as me, and I haven't found enough to fix the issue, so I'm placing a plea for help here. I have installed TWRP 2.6 recovery, and I am trying to flash OmniRom 4.4.2 nightlies. Originially I was trying to flash cyanogenmod 11, but I had this same problem. It appears to be any kit kat rom that causes the problem (I haven't tried flashing stock or any non-kitkat roms, but I was running on rooted stock before I tried to flash CM11). Anyways, When I flash I am wiping dalvik, cached, system, and data. Then flashing the rom, then flashing Paranoid android gapps. It will boot the first time fine. My phone will work just fine afterwards. However, if my battery dies or I restart, I will be unable to boot back into the rom and my phone becomes a soft brick. It will just stay stuck at the galaxy s 4 logo for as long as I leave it on. I have left it on for more than 30 minutes and there are no changes. I can't have my phone being just a dead battery away from being bricked, so I am asking for your help! Anything is much appreciated!
One other side note: I had my phone just lock up on me once in the middle of it running just fine. Afterwards it turned off on its own and tried to restart, but it resulted in the same issue. I don't know if this is related or just a bug in the rom.
Click to expand...
Click to collapse
Omni clearly states that it is an alpha, so you mileage may vary considerably.
Sounds kernel related. Have you tried just reflashing the kernel and seeing if it'll boot after that. Or trying a different kernel?
Thanks for the reply! I actually just fixed the problem on my own. I used Odin to flash a newer version of TWRP and then flashed omni, and it looks like everything is working just fine. I read a few people saying that they were having issues flashing kit kat roms with older versions of recovery, so I figured it was worth a shot.
tl;dr phone is in some kind of bootloop, tried flashing stock firmware (successful but can't get past start splash screen), plz halp me
So I was just simply browsing on my phone on reddit is fun app, some Google Chrome sites, and 9gag. So then I saved a gif on 9gag and the phone just gives up on me. It went straight to shut down without any warning whatsoever and proceeded to restart. Thinking that it was just an unusual one time thing, the phone kept rebooting and I started really getting worried. I kept getting the Samsung Galaxy S4 splash screen and after that a black screen and then it vibrated twice and I saw the splash screen again. Didn't even get to see the menu for SafeStrap. After several unsuccessful attempts, I finally accessed SafeStrap after restarting the phone from download mode pressing the volume down button. To make as much precious time as I had, I made a backup (although I checked enable compression which I shouldn't have but I didn't have a lot of space on my SD card) and made an advanced wipe cleaning everything except the SD card. I then proceeded to flash a different custom ROM (GoldenEye if you were wondering) and hoped that it was just a custom ROM error that kept giving bootloops. No such luck. The different ROM didn't even help. So I went back to SafeStrap and made another advanced wipe. At this point, I decided to flash stock firmware via Odin from this link (http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642) with NB1 base. I remember having flashed the non-rootable version successfully and restarted the phone after that. Got past the Samsung Galaxy S4 splash screen and went all the way to ATT splash screen but then it crashed right there. After that, I couldn't figure out the problem and I couldn't flash any more stock firmware (at least from that link) via Odin because I kept getting a fail notice. I asked this question on reddit and the responses kept saying that I may have a defective power button but it doesn't stay shut down and instead bootloops. Should I try to find a new GS4, get another phone or try sammobile firmwares next to see if there's any luck? I really need to save this phone as it is super dear to me. I'm at the point where I can cry right now :crying:
If you guys need any pictures or videos, I will be more willing to do so
RawSynergy said:
tl;dr phone is in some kind of bootloop, tried flashing stock firmware (successful but can't get past start splash screen), plz halp me
So I was just simply browsing on my phone on reddit is fun app, some Google Chrome sites, and 9gag. So then I saved a gif on 9gag and the phone just gives up on me. It went straight to shut down without any warning whatsoever and proceeded to restart. Thinking that it was just an unusual one time thing, the phone kept rebooting and I started really getting worried. I kept getting the Samsung Galaxy S4 splash screen and after that a black screen and then it vibrated twice and I saw the splash screen again. Didn't even get to see the menu for SafeStrap. After several unsuccessful attempts, I finally accessed SafeStrap after restarting the phone from download mode pressing the volume down button. To make as much precious time as I had, I made a backup (although I checked enable compression which I shouldn't have but I didn't have a lot of space on my SD card) and made an advanced wipe cleaning everything except the SD card. I then proceeded to flash a different custom ROM (GoldenEye if you were wondering) and hoped that it was just a custom ROM error that kept giving bootloops. No such luck. The different ROM didn't even help. So I went back to SafeStrap and made another advanced wipe. At this point, I decided to flash stock firmware via Odin from this link (http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642) with NB1 base. I remember having flashed the non-rootable version successfully and restarted the phone after that. Got past the Samsung Galaxy S4 splash screen and went all the way to ATT splash screen but then it crashed right there. After that, I couldn't figure out the problem and I couldn't flash any more stock firmware (at least from that link) via Odin because I kept getting a fail notice. I asked this question on reddit and the responses kept saying that I may have a defective power button but it doesn't stay shut down and instead bootloops. Should I try to find a new GS4, get another phone or try sammobile firmwares next to see if there's any luck? I really need to save this phone as it is super dear to me. I'm at the point where I can cry right now :crying:
If you guys need any pictures or videos, I will be more willing to do so
Click to expand...
Click to collapse
I'd say try redownloading the firmware and make sure your cable is good, try a back USB port, etc. I'd guess the firmware files didn't download properly and so it didn't flash properly. Before you do anything though, try going into stock recovery and wiping everything you can from there.
DeadlySin9 said:
I'd say try redownloading the firmware and make sure your cable is good, try a back USB port, etc. I'd guess the firmware files didn't download properly and so it didn't flash properly. Before you do anything though, try going into stock recovery and wiping everything you can from there.
Click to expand...
Click to collapse
Thank you for the reply. As for the firmware, where should I acquire them? The link I posted has only one firmware (NB1) and I cannot access stock recovery AT ALL. When I do, I can see the blue text in the corner "Recovery booting..." and then the phone restarts again. This is really frustrating
RawSynergy said:
Thank you for the reply. As for the firmware, where should I acquire them? The link I posted has only one firmware (NB1) and I cannot access stock recovery AT ALL. When I do, I can see the blue text in the corner "Recovery booting..." and then the phone restarts again. This is really frustrating
Click to expand...
Click to collapse
NB1 is the only one you can get, just try downloading either one again.
DeadlySin9 said:
NB1 is the only one you can get, just try downloading either one again.
Click to expand...
Click to collapse
I did twice today and I keep getting the same message in Odin, like setting up a connection and then it fails
RawSynergy said:
I did twice today and I keep getting the same message in Odin, like setting up a connection and then it fails
Click to expand...
Click to collapse
When you plug in the phone in Download Mode, does the blue box in Odin light up? If not, reinstall samsung drivers
Sent from my SM-N910G using Tapatalk
So, I have gotten myself in a bit of a pickle I however think I can get out of it by sideloading using EXT. SD, Im not sure what to flash to solve the dillemma however. So this is the situation. I have a (had) a rooted Galaxy s4 (sgh-i337 ucufnc1) with 4.4.2 android. It had safestrap installed and back ups of everything else in sd card and other locations just in case. The phone was acting buggy, so I formatted the phone with safestrap, the problem persisted, ill get into the issue a bit further down. So I booted back into safestrap, and did a complete wipe, however my sd card must've bumped out, because it didnt delete any media files or so it said, and then after the wipe it crashed. and refuses to boot into safestrap or even past the splash logo. I can get into download mode, but usb debugging isnt on anymore since i wiped it, I can get into the other mode as well ( cant for the life of me remember the name of it atm although i use it frequently) with some luck. I also happen to have all .md5 files from a backup i did about 4 months ago in tact, I cannot for the life of me get them to convert properly to apply them to the phone without safestrap however, if anyone has any insight to this please let me know also.
I can/will list any other information I have if anyone needs it, and if anyone can help it would safe a life!
The reason i reformatted it to begin with, was because media would stall, and when i plugged in the audio jack it'd freeze the entire app using it, then the whole phone would freeze. I believe it was due to lucky patcher but im unsure. The issue began when I altered the auto update file, and even after i rectified it, it persisted. At this time i have a phone soft bricked because it didnt delete all the media files and I assume something bugged onto the kernel image but Im not sure. If I can simply try to restore it to stock kernel then im fine with that.
Ghujii said:
So, I have gotten myself in a bit of a pickle I however think I can get out of it by sideloading using EXT. SD, Im not sure what to flash to solve the dillemma however. So this is the situation. I have a (had) a rooted Galaxy s4 (sgh-i337 ucufnc1) with 4.4.2 android. It had safestrap installed and back ups of everything else in sd card and other locations just in case. The phone was acting buggy, so I formatted the phone with safestrap, the problem persisted, ill get into the issue a bit further down. So I booted back into safestrap, and did a complete wipe, however my sd card must've bumped out, because it didnt delete any media files or so it said, and then after the wipe it crashed. and refuses to boot into safestrap or even past the splash logo. I can get into download mode, but usb debugging isnt on anymore since i wiped it, I can get into the other mode as well ( cant for the life of me remember the name of it atm although i use it frequently) with some luck. I also happen to have all .md5 files from a backup i did about 4 months ago in tact, I cannot for the life of me get them to convert properly to apply them to the phone without safestrap however, if anyone has any insight to this please let me know also.
I can/will list any other information I have if anyone needs it, and if anyone can help it would safe a life!
The reason i reformatted it to begin with, was because media would stall, and when i plugged in the audio jack it'd freeze the entire app using it, then the whole phone would freeze. I believe it was due to lucky patcher but im unsure. The issue began when I altered the auto update file, and even after i rectified it, it persisted. At this time i have a phone soft bricked because it didnt delete all the media files and I assume something bugged onto the kernel image but Im not sure. If I can simply try to restore it to stock kernel then im fine with that.
Click to expand...
Click to collapse
UPDATE: I resolved the issue, by rooting, safestrapping, ripping the image files, from another galaxy s4 with alike descriptions. then i managed to side load it, then it booted properly, i then reformatted it completely back to 100% factory everything. Now my original problem persists, and i cant help feel that google services is causing it. (examnples of issues" proccess.gapps has stopped. anotrher process error code. phone calls can be made, but not recieved as it seems the server is too busy to n otice it, massive battery drain, audio takes several seconds to play, while video continues to play fine, audiojack is mostly unresponsive, phone calls that are made cannot recieve or send audio during call session, phone may freeze at unlock screen, or any time during operation, may even reboot from process overloading" now keep in mind. i removed every system file and app that the natural reformat will allow. so nothing applied by the user is on the phone, other than natural factory applications. Im digging a bit into the phone as i can but its a slow process whenit starts freezing. if anyone has any idea of what can be causing this, or how to fix this please inform me lol.
Ghujii said:
UPDATE: I resolved the issue, by rooting, safestrapping, ripping the image files, from another galaxy s4 with alike descriptions. then i managed to side load it, then it booted properly, i then reformatted it completely back to 100% factory everything. Now my original problem persists, and i cant help feel that google services is causing it. (examnples of issues" proccess.gapps has stopped. anotrher process error code. phone calls can be made, but not recieved as it seems the server is too busy to n otice it, massive battery drain, audio takes several seconds to play, while video continues to play fine, audiojack is mostly unresponsive, phone calls that are made cannot recieve or send audio during call session, phone may freeze at unlock screen, or any time during operation, may even reboot from process overloading" now keep in mind. i removed every system file and app that the natural reformat will allow. so nothing applied by the user is on the phone, other than natural factory applications. Im digging a bit into the phone as i can but its a slow process whenit starts freezing. if anyone has any idea of what can be causing this, or how to fix this please inform me lol.
Click to expand...
Click to collapse
The best solution must be installing the stock firmware via odin. Since you are on NC1 , You can installed the stock NB1.
Here is guide explaining you using odin, installing NB1, root with towel root, updated NC1, install the safestrap. The guide was not specifically written for that but you can find those steps in the guide.
I will attempt to do this, since nothing since has work. I am about to get a new logic board for the system in the next 2 weeks. Towel root DOES typically work on this system, however the last time I attmpted it it failed to work outright. Im not sure what has changed with the device, but i believe reflashing stock is the best method. The phone now, will boot up, then skip the lock screen and go straight to the home screen, which is black with no pull down bar, or with no signal and there is no way to rectify it. Even if there were, it boots back down and launches back up and becomes locked at the ATT logo.
After a fair bit of messing with it, and recovery mode it will sometimes boot normally where it tells me that processes has failed and askes me to cancel the ''app''. This is the best option to update the phone and attempt root, but getting it here is so difficult because it reboots itself and the mode is rare to acquire. This problem either is due to the kernel, or the rom i believe. I also am to believe the powercell may have some issue, as i replaced the battery a few weeks back and it worked fine for about 1 week.
Booting into safemode doesnt work either as it skips over the lock screen straight to the home screen. Outsidce of replacing the logic board, or attempting another flash im at the end of the short rope i was already on in terms of options.
sway8966 said:
The best solution must be installing the stock firmware via odin. Since you are on NC1 , You can installed the stock NB1.
Here is guide explaining you using odin, installing NB1, root with towel root, updated NC1, install the safestrap. The guide was not specifically written for that but you can find those steps in the guide.
Click to expand...
Click to collapse
UPDATE: I found therein two methods to flashback to stock. I did so, then proceeded to attempt to flash from nb1 to nj4. Progress stopped there when it flung an error 7 at me. So this means either something in my phone is corrupted or the file i downloaded from the above mentioned forum is corrupted. I also attempted flashfire, but seen as it STILL crashes at random due to process errors thats almost impossible to attempt.
Recently bought a new out-of-the box Galaxy S4 I337 from Amazon. Had i known how much trouble it would give me, i would have picked something else. When i first turned the device on, it was almost totally unusable due to lag and random reboots. Software version was 4.4.2. I used Odin to flash a rootable NB1 onto the device. Still had lag and random reboots. Upgraded to lollipop using this guide: https://forum.xda-developers.com/galaxy-s4-att/help/guide-att-samsung-galaxy-s4-sgh-i337-t3383078 and still have lag and random reboots. Also, the first time i upgraded to lollipop, i installed safestrap not knowing it wouldn't work on lollipop. Obviously, my recovery disappeared. When i figured out what was going on, i did a fresh install of lollipop. I got recovery back, but today when i tried to boot into recovery to wipe the cache, i discovered it had mysteriously stopped working again. If i attempt to boot into recovery, it just skips to the Samsung logo. I didn't install safestrap or any other custom recovery this time.
When i turn the phone on, either it hangs at the AT&T white splash logo and refuses to load at all, or advances to the lock screen. I have disabled animations and every widget i could on the lock screen and yet when i attempt to unlock the phone, it usually freezes. If i repeatedly swipe the phone for thirty seconds or so, it unlocks but it is still frozen and i have to continue swiping to prevent it from locking again. Eventually i'm able to navigate the phone normally, until it randomly reboots or freezes. Sometimes i see an error message that Touchwiz home, Process System, or SystemUI has stopped working or is not responding. This is always accompanied by a freeze. Also, choosing an option in the dialogue that comes up when i press the power button (shut down, reboot, etc) invariably causes the device to soft reboot. Other times a soft reboot happens totally at random, even if i'm not doing anything. Anybody have any idea what's going on or did Amazon just sell me a dud? All of these issues have been happening since before i rooted the device or upgraded it, except for the disappearing recovery mode.
Thanks in advance for your help.
Sounds like a data factory reset is in order. First you need recovery back so I would odin the latest firmware for the phone that can be flashed in odin. If it's still messing up then get Amazon to replace it.
Since you have safe strap though, try booting a TW based rom like Thor ROM or Golden eye ROM. That may fix some things.
StoneyJSG said:
Sounds like a data factory reset is in order. First you need recovery back so I would odin the latest firmware for the phone that can be flashed in odin. If it's still messing up then get Amazon to replace it.
Since you have safe strap though, try booting a TW based rom like Thor ROM or Golden eye ROM. That may fix some things.
Click to expand...
Click to collapse
Just wanted to bump this to thank you for your reply. Never got the phone to work but i was able to get it back to stock and return it. I got a refurbished S5 instead.