I went thru every single thread, i have the latest TWRP 3.2.1, so no Error 7.
The ROM's install (i've tried Unofficial/RR/PixelExperience/BootLeggers/Cosmic/AOSIP) and the install goes smooth, but all stuck on Bootloop!
What on earth am I doing wrong? I can't find anyone mentioning specific Kernel or where to get an OREO specific Kernel.
Is there a Boot.img ? do i need to flash it as well? (no one says so in instructions)
The last rom i've got is the Official 7.1.2 which boots without a problem.
Note: But only the 20171025 build, nothing after that even of 7.1.2 doesn't boot (just has bootloop)
Device Specs as Appear on the back: YU4711, H/W ver V2.0, S/W ver: V0.0.9_171215, (2+8) GB
Have you updated the modem from cyanogen 14.0 then try again.
BTW you should made in discussion.
Flash your Phone with stock ROM
YU_YU4711_SW_V0.0.9_HW_V1.0_171215_2016012715.zip .
This can resolve your problem.
The AndroidGuy said:
Have you updated the modem from cyanogen 14.0 then try again.
BTW you should made in discussion.
Click to expand...
Click to collapse
I didn't know there is a new Modem from CM14, do you have a link or a name?
RoHiTkUmArShArMa said:
Flash your Phone with stock ROM
YU_YU4711_SW_V0.0.9_HW_V1.0_171215_2016012715.zip .
This can resolve your problem.
Click to expand...
Click to collapse
I'm sorry, but why on earth would I want to put my phone back on v5.1.1 ?
Sefy said:
I'm sorry, but why on earth would I want to put my phone back on v5.1.1 ?
Click to expand...
Click to collapse
It have some other files also including android 5... So flash this
And then flash twrp
Reflash the entire stock firmware *except system, userdata, recovery, cache* through fastboot, then you should be good to go.
ask in Q/A thread
RoHiTkUmArShArMa said:
It have some other files also including android 5... So flash this
And then flash twrp
Click to expand...
Click to collapse
I honestly don't see the logic in putting the phone back into Stock ROM of Android 5.1.1, when I can use it with 7.1.2 without a problem and only flashing of new ROM's is an issue.
But I have found something that may give more information, this is HW_V2 , so i'm assuming this device is the YU YUNIQUE 2 which is basically identical but with 2GB ram instead of 1GB ram.
Sefy said:
I honestly don't see the logic in putting the phone back into Stock ROM of Android 5.1.1, when I can use it with 7.1.2 without a problem and only flashing of new ROM's is an issue.
But I have found something that may give more information, this is HW_V2 , so i'm assuming this device is the YU YUNIQUE 2 which is basically identical but with 2GB ram instead of 1GB ram.
Click to expand...
Click to collapse
Can you able to boot into official LineageOS without editing updater-script?
The AndroidGuy said:
Can you able to boot into official LineageOS without editing updater-script?
Click to expand...
Click to collapse
As I mentioned, I can boot into 7.1.2 (that's LineageOS), but the latest i'm able to boot is 25/10/2017 and any build after, goes into bootloop.
Sefy said:
As I mentioned, I can boot into 7.1.2 (that's LineageOS), but the latest i'm able to boot is 25/10/2017 and any build after, goes into bootloop.
Click to expand...
Click to collapse
Maybe it is time to change device.
The AndroidGuy said:
Maybe it is time to change device.
Click to expand...
Click to collapse
Right....
I resolved the issue after way too much digging around, the issue was flashing the specific NON-HLOS.bin and now I can flash v8.x and v9.x roms
The one that resolved my issue came from this link: https://androidfilehost.com/?fid=817550096634760193
Help me
Can you tell me how to use this file plzz and thnx for solving this prb @Sefy
wise7709 said:
Can you tell me how to use this file plzz and thnx for solving this prb @Sefy
Click to expand...
Click to collapse
You need to flash it using: fastboot flash modem non-hls.bin
Then reboot and flashing of the ROM should go correctly and for me atleast, it booted up.
Related
I was looking for instructions on this before flashing OOS beta, and can't find any.
hunter_bruhh said:
I was looking for instructions on this before flashing OOS beta, and can't find any.
Click to expand...
Click to collapse
Hello ?
And ?
What do you want ?
Are you sure you searched well ?
Search better 'cause it exists ?
Thanks.
I too have the same problem.
http://forum.xda-developers.com/oneplus-2/general/firstaid-zip-revert-h2os-mm-beta-to-lp-t3306967
try this method. I tried and solved the problem.
You can look at "H2OS Marshmallow debloated" thread.
hunter_bruhh said:
I was looking for instructions on this before flashing OOS beta, and can't find any.
Click to expand...
Click to collapse
tbiwalkar said:
I too have the same problem.
Click to expand...
Click to collapse
You can find a detailed guide below on every possible thing you want to do before after flashing OOS3 .
https://forums.oneplus.net/threads/installation-instructions-faqs-oxygenos-3-0-0.439108/
lockmunk said:
http://forum.xda-developers.com/oneplus-2/general/firstaid-zip-revert-h2os-mm-beta-to-lp-t3306967
try this method. I tried and solved the problem.
Click to expand...
Click to collapse
Isn't that the thread which should be used in case the user encounters any problem when reverting from OOS3/H2OS based roms ?
I guess the OP asked for instructions on how to get back to CM after flashing OOS3 , until and unless he screws up , he wont be needing it
mdaamir1989 said:
Isn't that the thread which should be used in case the user encounters any problem when reverting from OOS3/H2OS based roms ?
I guess the OP asked for instructions on how to get back to CM after flashing OOS3 , until and unless he screws up , he wont be needing it
Click to expand...
Click to collapse
I also faced same problem as him, which is I want to revert to CM13 after flash OOS3
Here is the simple way to move back and forth...I do it regularly...sometimes more than once a day! Keep in mind this-CM13 and Oxygen 2 versions are on the old TWRP and Hydrogen MM and Oxygen 3.0 are on the new TWRP. So look up two zips one is the revert2lollipop and flash that before flashing CM13 or Oxygen 2.O Roms. It will boot you into the correct TWRP. Find the zip H2OS_TWRP3+MMFIRMW and flash that before flashing Oxygen 3 or Hydrogen MM. It will boot you into the right TWRP. So my method if I'm on CM13 is just to boot into TWRP flash H2OS_TWRP3+MMFIRMW and it will reboot and then wipe all but internal and then flash either Hydrogen MM or the Oxygen 3 ROM or the appropriate nandroid backup...if you are in Oxygen 3 just flash the revert2lollipop and it will reboot in to the right TWRP then full wipe and flash CM13. I have done it many times with no issues. Some CM13 also require a new modem but just flash that if you get FCs in the setup...
There is a topic in development that is appropriately titled where you can find the two zip files.
Sent from my ONE A2005 using Tapatalk
I have installed resurrection mod on my phone, this part is working at the moment.
I followed a tutorial to install it using twrp, however everytime i tried to launch it i would get a pixilated yellow screen and the phone would freeze on the android logo.
I followed this guide https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
Now the phone loads into resurrection fine, however when i try to go into recovery mode the phone has black and white noise at the top like an old TV and it freezes.
I have tried installing TWRP again with no luck.
What should i try now?
whittney said:
I have installed resurrection mod on my phone, this part is working at the moment.
I followed a tutorial to install it using twrp, however everytime i tried to launch it i would get a pixilated yellow screen and the phone would freeze on the android logo.
I followed this guide https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
Now the phone loads into resurrection fine, however when i try to go into recovery mode the phone has black and white noise at the top like an old TV and it freezes.
I have tried installing TWRP again with no luck.
What should i try now?
Click to expand...
Click to collapse
I also used their BL and Modem, but it didn't work for me either. So when they ask you (in ROM Threads) to have 5.1.1 or 6.0.1, you'd better flash the whole firmware.
do you have a guide on how to do that?
whittney said:
do you have a guide on how to do that?
Click to expand...
Click to collapse
What is your RR ROM? Are u with the official TWRP installed?
JohnTryingToRoot said:
I also used their BL and Modem, but it didn't work for me either. So when they ask you (in ROM Threads) to have 5.1.1 or 6.0.1, you'd better flash the whole firmware.
Click to expand...
Click to collapse
Taivotat2 said:
What is your RR ROM? Are u with the official TWRP installed?
Click to expand...
Click to collapse
Hi dude right now i have nothing on my phone but TWRP, if it try to start my phone it shows the samsung logo, then the screen goes yellow very slow and freezes..
whittney said:
Hi dude right now i have nothing on my phone but TWRP, if it try to start my phone it shows the samsung logo, then the screen goes yellow very slow and freezes..
Click to expand...
Click to collapse
Your problem has solution, but you should give us proper and more detailed info about your issue, which RR rom you were using or people must guess it? Which the latest ROM you flashed? Are you with official TWRP?
C'mon make an effort and tell your specs correctly so any member could guide you.
Taivotat2 said:
Your problem has solution, but you should give us proper and more detailed info about your issue, which RR rom you were using or people must guess it? Which the latest ROM you flashed? Are you with official TWRP?
C'mon make an effort and tell your specs correctly so any member could guide you.
Click to expand...
Click to collapse
Sorry i have been trying to fix this all day and have not had much sleep.
This is the RR mod i used
https://forum.xda-developers.com/galaxy-j5/development/rom-resurrectionremix-v5-8-1-t3566035
This is the version of TWRP
https://twrp.me/site/update/2016/04/05/twrp-3.0.2-0-released.html
I cant seem to update TWRP to the latest version, i downloaded this image
https://twrp.me/site/update/2017/05/19/twrp-3.1.1-0-released.html
However, the image does not show up on my TWRP install explorer.
whittney said:
Sorry i have been trying to fix this all day and have not had much sleep.
This is the RR mod i used
https://forum.xda-developers.com/galaxy-j5/development/rom-resurrectionremix-v5-8-1-t3566035
This is the version of TWRP
https://twrp.me/site/update/2016/04/05/twrp-3.0.2-0-released.html
I cant seem to update TWRP to the latest version, i downloaded this image
https://twrp.me/site/update/2017/05/19/twrp-3.1.1-0-released.html
However, the image does not show up on my TWRP install explorer.
Click to expand...
Click to collapse
Download the latest and official TWRP from here
https://forum.xda-developers.com/ga...nofficial-twrp-3-1-x-galaxy-sm-j500h-t3588533
Taivotat2 said:
Download the latest and official TWRP from here
https://forum.xda-developers.com/ga...nofficial-twrp-3-1-x-galaxy-sm-j500h-t3588533
Click to expand...
Click to collapse
To note i was running android 6.0.1 marshmallow on my original rom.
TWRP now updated to 3.1.1-1.
whittney said:
To note i was running android 6.0.1 marshmallow on my original rom.
TWRP now updated to 3.1.1-1.
Click to expand...
Click to collapse
If you are with marshmallow bootloader you can flash Vince sources based ROMs. Validus by tioguda, Lineage by Vince, RR unofficial by Has.
If you want AOSPExt, Viper, RR official, you must downgrade to lollipop as stated by user above??, as these ROMs are Dyneteve's sources based ROMs which boot only with lollipop bootloader.
Taivotat2 said:
If you are with marshmallow bootloader you can flash Vince sources based ROMs. Validus by tioguda, Lineage by Vince, RR unofficial by Has.
If you want AOSPExt, Viper, RR official, you must downgrade to lollipop as stated by user above, as these ROMs are Dyneteve's sources based ROMs which boot only with lollipop bootloader.
Click to expand...
Click to collapse
Do you have a link to them i dont know what you mean.
Im sorry i am new to this and very tired.
whittney said:
do you have a guide on how to do that?
Click to expand...
Click to collapse
Plenty of explanations in J5 forums. Please take your time to read, read and more reading, as your issues were solved before and you will be fine.?
Taivotat2 said:
Plenty of explanations in J5 forums. Please take your time to read, read and more reading, as your issues were solved before and you will be fine.
Click to expand...
Click to collapse
Tried to install the rom again, after reset the samsung logo shows and my screen slowly goes yellow and freezes.
Now trying this rom
https://forum.xda-developers.com/ga...om-lineage-os-14-1-samsung-galaxy-j5-t3549552
whittney said:
Now trying this rom
https://forum.xda-developers.com/ga...om-lineage-os-14-1-samsung-galaxy-j5-t3549552
Click to expand...
Click to collapse
Stop. Mate, you must downgrade to install this one. READ at least the OP, man.
Same issue ...
There is also text saying warranty bit Kernel at the top in yellow text
whittney said:
Same issue ...
There is also text saying warranty bit Kernel at the top in yellow text
Click to expand...
Click to collapse
The message is normal. Help us to help you bro, and READ CAREFULLY the OP (first post) of each ROM thread, as you will find the necessary information to be fine.
Taivotat2 said:
The message is normal. Help us to help you bro, and READ CAREFULLY the OP (first post) of each ROM thread, as you will find the necessary information to be fine.
Click to expand...
Click to collapse
Are you referring to the android version ? So i need to find one that is 6.0.1 yes?
Like this one?
https://forum.xda-developers.com/grand-prime/development/rom-lineageos-sm-g530w-t-t1-p-t3546155
Ok still doing the yellow screen thing, but now have a new error.
Kernel is not seandroid enforcing
OOOOMMMMGGGGG. Someone to help me now?
Hello devs. I am facing finger print enrollment problem.
I can only enroll one finger in any ROM.
This started when I flashed linage 15.0.
I revert back to linage 14.1 still I'm facing same issue.
The issue is I can only enroll one finger. When it comes to second time I can enroll up to 95% after that it says pls try another finger.
ROM: linage 14.1
Kernal : stock
Modifications : not yet
Xposed : no
Root :no
Substratum : no
Flashed : clean flashed. By performing factory reset.
Then ROM then gapps..
Pls guide me if there is any fix.
At first I tought it was due to linage 15.0 but I still facing in 14.1 which I used earlier.
Thanks in advance. I'm new to snapdragon development.
VPawankumar369 said:
Hello devs. I am facing finger print enrollment problem.
I can only enroll one finger in any ROM.
This started when I flashed linage 15.0.
I revert back to linage 14.1 still I'm facing same issue.
The issue is I can only enroll one finger. When it comes to second time I can enroll up to 95% after that it says pls try another finger.
ROM: linage 14.1
Kernal : stock
Modifications : not yet
Xposed : no
Root :no
Substratum : no
Flashed : clean flashed. By performing factory reset.
Then ROM then gapps..
Pls guide me if there is any fix.
At first I tought it was due to linage 15.0 but I still facing in 14.1 which I used earlier.
Thanks in advance. I'm new to snapdragon development.
Click to expand...
Click to collapse
Do you have latest stock N firmware/modem ?
What is baseband ?
____Mdd said:
Do you have latest stock N firmware/modem ?
What is baseband ?
Click to expand...
Click to collapse
Nope Im in linage is 14.1 latest build . gapps micro 7.1 noting else
I'm using g4 plus Indian variant
1643
flash the latest stock firmware and after that flash any custom ROM you like.
Titan068 said:
flash the latest stock firmware and after that flash any custom ROM you like.
Click to expand...
Click to collapse
The problem is that I can't install moto drivers in my lappy.
VPawankumar369 said:
Nope Im in linage is 14.1 latest build . gapps micro 7.1 noting else
I'm using g4 plus Indian variant
1643
Click to expand...
Click to collapse
The baseband/modem thing don't come with any custom ROM, it is the thing which come with stock ROMs, and remains same in any ROM you install..
Settings > about > baseband.
It should be M8950_70030.-------....
If it is lower than 70030, then you need to flash latest stock ROM.
____Mdd said:
The baseband/modem thing don't come with any custom ROM, it is the thing which come with stock ROMs, and remains same in any ROM you install..
Settings > about > baseband.
It should be M8950_70030.-------....
If it is lower than 70030, then you need to flash latest stock ROM.
Click to expand...
Click to collapse
It is lower can u send me latest link
VPawankumar369 said:
It is lower can u send me latest link
Click to expand...
Click to collapse
(Link below) NOTE: don't use LOCK commands given in script, if you don't want to re-lock bootloader.
Link: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
____Mdd said:
(Link below) NOTE: don't use LOCK commands given in script, if you don't want to re-lock bootloader.
Link: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Click to expand...
Click to collapse
thanks
VPawankumar369 said:
can u explain step 5 I dnt wana lock it
Click to expand...
Click to collapse
Commands given there contain lock commands which will re-lock your bootloader,
You don't need to use them,
So, while flashing, dont use them,
"oem lock begin" (two times in starting)
And "oem lock" (last second)
Use all commands except this threee..
____Mdd said:
Commands given there contain lock commands which will re-lock your bootloader,
You don't need to use them,
So, while flashing, dont use them,
"oem lock begin" (two times in starting)
And "oem lock" (last second)
Use all commands except this threee..
Click to expand...
Click to collapse
Its not working for me I have installed everything needed
VPawankumar369 said:
Its not working for me I have installed everything needed
Click to expand...
Click to collapse
Disable any any firewall, anti virus or signature verification. Try again.
strongst said:
Disable any any firewall, anti virus or signature verification. Try again.
Click to expand...
Click to collapse
Signature verification in the sense??
VPawankumar369 said:
Signature verification in the sense??
Click to expand...
Click to collapse
Drivers won't install if signature is wrong. Don't know what os you're running on the laptop or what other software is active(I don't want to troubleshoot in that direction) but please make sure it's not because of any of my previous post.
strongst said:
Drivers won't install if signature is wrong. Don't know what os you're running on the laptop or what other software is active(I don't want to troubleshoot in that direction) but please make sure it's not because of any of my previous post.
Click to expand...
Click to collapse
Developer preview win 10 creators. I had Mac antivirus . I disabled right now. While installing drivers it says incorrect parameter
____Mdd said:
The baseband/modem thing don't come with any custom ROM, it is the thing which come with stock ROMs, and remains same in any ROM you install..
Settings > about > baseband.
It should be M8950_70030.-------....
If it is lower than 70030, then you need to flash latest stock ROM.
Click to expand...
Click to collapse
Can I increase base band using root
VPawankumar369 said:
Can I increase base band using root
Click to expand...
Click to collapse
No, you can not.
Try installing adb drivers. Here: https://forum.xda-developers.com/showthread.php?t=2091922
____Mdd said:
No, you can not.
Try installing adb drivers. Here: https://forum.xda-developers.com/showthread.php?t=2091922
Click to expand...
Click to collapse
Thanks but it says drivers already installed but still I cant get fastboot devices
____Mdd said:
No, you can not.
Try installing adb drivers. Here: https://forum.xda-developers.com/showthread.php?t=2091922
Click to expand...
Click to collapse
See I can't find fastboot devices. But I can detect my mobile using adb devices. That to only when device is on.
Then I tried going to boot loader using command and then I tried fastboot device command but still it can't detect
@VPawankumar369 when you connected in bootloader, check your PC's device manager and update drivers if anything is unknown or uninstall and reinstall drivers.
It's driver problem, if you are not able to do in that PC, then ask someone else for 30 minutes.
Anyone here tried flashing roms on SD 615 variant? Flashed RR and lineage already and still not able to boot. Stuck on bootanimation then reboots itself. Wiped system data cache internal in TWRP before flashing. Did i miss something? Please heeeelp
discreet3 said:
Anyone here tried flashing roms on SD 615 variant? Flashed RR and lineage already and still not able to boot. Stuck on bootanimation then reboots itself. Wiped system data cache internal in TWRP before flashing. Did i miss something? Please heeeelp
Click to expand...
Click to collapse
I'm using SD615 variant .. ...
First make sure twrp is latest i.e 3.2.1 ..
secondly wipe everything except sd and otg
Try flashing some other rom ... i'd suggest aex or bootleggers ..
let me know what happens then
best of luck :good:
kirito05 said:
I'm using SD615 variant .. ...
First make sure twrp is latest i.e 3.2.1 ..
secondly wipe everything except sd and otg
Try flashing some other rom ... i'd suggest aex or bootleggers ..
let me know what happens then
best of luck :good:
Click to expand...
Click to collapse
Tried aex still the same happened. Used 3.2.1 twrp. Have you successfully flashed those roms on yours? LOS AEX?
discreet3 said:
Tried aex still the same happened. Used 3.2.1 twrp. Have you successfully flashed those roms on yours? LOS AEX?
Click to expand...
Click to collapse
yes dude each and every one is working properly !!
Ok follow this thread
https://forum.xda-developers.com/zen...601kl-t3333482
ASUS upgraded the firmware for our device recently ... follow this so you get on the latest bootloader (which i'm guessing you have unlocked)
then try wiping then flashing then hit me again if problem arises
kirito05 said:
I'm using SD615 variant .. ...
First make sure twrp is latest i.e 3.2.1 ..
secondly wipe everything except sd and otg
Try flashing some other rom ... i'd suggest aex or bootleggers ..
let me know what happens then
best of luck :good:
Click to expand...
Click to collapse
kirito05 said:
yes dude each and every one is working properly !!
Ok follow this thread
https://forum.xda-developers.com/zen...601kl-t3333482
ASUS upgraded the firmware for our device recently ... follow this so you get on the latest bootloader (which i'm guessing you have unlocked)
then try wiping then flashing then hit me again if problem arises
Click to expand...
Click to collapse
Incomplete link man is that back2stock? What firmware you on before flashing roms? Firmware might be the issue here.
discreet3 said:
Incomplete link man is that back2stock? What firmware you on before flashing roms? Firmware might be the issue here.
Click to expand...
Click to collapse
this is the link . https://forum.xda-developers.com/ze...50kl-ze551kl-zd551kl-ze600kl-ze601kl-t3333482
i cant remember the last time i was using stock rom but the firmware was updated last on 18th april .
kirito05 said:
this is the link . https://forum.xda-developers.com/ze...50kl-ze551kl-zd551kl-ze600kl-ze601kl-t3333482
i cant remember the last time i was using stock rom but the firmware was updated last on 18th april .
Click to expand...
Click to collapse
2018? Im on stock rom already flashed through stock recovery. I flashed those custom roms on latest 2196 firmware also tried that on older firmwares still no luck
ok then try this ... use adb sideload to install the rom .. google it its pretty easy to do .. then tell me what happens
i tried all custom roms and my phone was fully dead but i managed to get it alive again
here's the solution
after installing any custom rom
go to mount and mark on system
then go to file manager from setting in twrp
open system>etc>firmware then delete the first three folders, i have stock rom now i can't remember wat exactly it's name
enjoy your rom
Hi All,
I am having a problem with flashing a new ROM to my phone.
I picked up some malware while browsing and I decided to go scorched earth and simply wipe and reload my OS (to a newer android version aswell)
the problem is that whenever I try flash the new rom with TWRP i get an error as follows:
E3004: This package is for device: land; this device is .
Click to expand...
Click to collapse
I KNOW i have the correct rom type as I have loaded Lineage previously on my device. and it is most definitely land
Is there a way that I can fix this device type error?
I'd rather NOT have to buy a new device
Are you using the latest TWRP?
krishna_jm said:
Are you using the latest TWRP?
Click to expand...
Click to collapse
Hi Krishna,
No, I am still using the TWRP i flashed when I originally loaded Cyaonogen last year sometime, I then later used it to load Lineage with no problems.
m43l57r0m said:
Hi Krishna,
No, I am still using the TWRP i flashed when I originally loaded Cyaonogen last year sometime, I then later used it to load Lineage with no problems.
Click to expand...
Click to collapse
I would suggest you to use the latest TWRP as most recent ROMs are treble based which cannot be flashed by the old TWRP. Which ROM are you trying to flash right now?