Hello devs. I am facing finger print enrollment problem.
I can only enroll one finger in any ROM.
This started when I flashed linage 15.0.
I revert back to linage 14.1 still I'm facing same issue.
The issue is I can only enroll one finger. When it comes to second time I can enroll up to 95% after that it says pls try another finger.
ROM: linage 14.1
Kernal : stock
Modifications : not yet
Xposed : no
Root :no
Substratum : no
Flashed : clean flashed. By performing factory reset.
Then ROM then gapps..
Pls guide me if there is any fix.
At first I tought it was due to linage 15.0 but I still facing in 14.1 which I used earlier.
Thanks in advance. I'm new to snapdragon development.
VPawankumar369 said:
Hello devs. I am facing finger print enrollment problem.
I can only enroll one finger in any ROM.
This started when I flashed linage 15.0.
I revert back to linage 14.1 still I'm facing same issue.
The issue is I can only enroll one finger. When it comes to second time I can enroll up to 95% after that it says pls try another finger.
ROM: linage 14.1
Kernal : stock
Modifications : not yet
Xposed : no
Root :no
Substratum : no
Flashed : clean flashed. By performing factory reset.
Then ROM then gapps..
Pls guide me if there is any fix.
At first I tought it was due to linage 15.0 but I still facing in 14.1 which I used earlier.
Thanks in advance. I'm new to snapdragon development.
Click to expand...
Click to collapse
Do you have latest stock N firmware/modem ?
What is baseband ?
____Mdd said:
Do you have latest stock N firmware/modem ?
What is baseband ?
Click to expand...
Click to collapse
Nope Im in linage is 14.1 latest build . gapps micro 7.1 noting else
I'm using g4 plus Indian variant
1643
flash the latest stock firmware and after that flash any custom ROM you like.
Titan068 said:
flash the latest stock firmware and after that flash any custom ROM you like.
Click to expand...
Click to collapse
The problem is that I can't install moto drivers in my lappy.
VPawankumar369 said:
Nope Im in linage is 14.1 latest build . gapps micro 7.1 noting else
I'm using g4 plus Indian variant
1643
Click to expand...
Click to collapse
The baseband/modem thing don't come with any custom ROM, it is the thing which come with stock ROMs, and remains same in any ROM you install..
Settings > about > baseband.
It should be M8950_70030.-------....
If it is lower than 70030, then you need to flash latest stock ROM.
____Mdd said:
The baseband/modem thing don't come with any custom ROM, it is the thing which come with stock ROMs, and remains same in any ROM you install..
Settings > about > baseband.
It should be M8950_70030.-------....
If it is lower than 70030, then you need to flash latest stock ROM.
Click to expand...
Click to collapse
It is lower can u send me latest link
VPawankumar369 said:
It is lower can u send me latest link
Click to expand...
Click to collapse
(Link below) NOTE: don't use LOCK commands given in script, if you don't want to re-lock bootloader.
Link: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
____Mdd said:
(Link below) NOTE: don't use LOCK commands given in script, if you don't want to re-lock bootloader.
Link: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Click to expand...
Click to collapse
thanks
VPawankumar369 said:
can u explain step 5 I dnt wana lock it
Click to expand...
Click to collapse
Commands given there contain lock commands which will re-lock your bootloader,
You don't need to use them,
So, while flashing, dont use them,
"oem lock begin" (two times in starting)
And "oem lock" (last second)
Use all commands except this threee..
____Mdd said:
Commands given there contain lock commands which will re-lock your bootloader,
You don't need to use them,
So, while flashing, dont use them,
"oem lock begin" (two times in starting)
And "oem lock" (last second)
Use all commands except this threee..
Click to expand...
Click to collapse
Its not working for me I have installed everything needed
VPawankumar369 said:
Its not working for me I have installed everything needed
Click to expand...
Click to collapse
Disable any any firewall, anti virus or signature verification. Try again.
strongst said:
Disable any any firewall, anti virus or signature verification. Try again.
Click to expand...
Click to collapse
Signature verification in the sense??
VPawankumar369 said:
Signature verification in the sense??
Click to expand...
Click to collapse
Drivers won't install if signature is wrong. Don't know what os you're running on the laptop or what other software is active(I don't want to troubleshoot in that direction) but please make sure it's not because of any of my previous post.
strongst said:
Drivers won't install if signature is wrong. Don't know what os you're running on the laptop or what other software is active(I don't want to troubleshoot in that direction) but please make sure it's not because of any of my previous post.
Click to expand...
Click to collapse
Developer preview win 10 creators. I had Mac antivirus . I disabled right now. While installing drivers it says incorrect parameter
____Mdd said:
The baseband/modem thing don't come with any custom ROM, it is the thing which come with stock ROMs, and remains same in any ROM you install..
Settings > about > baseband.
It should be M8950_70030.-------....
If it is lower than 70030, then you need to flash latest stock ROM.
Click to expand...
Click to collapse
Can I increase base band using root
VPawankumar369 said:
Can I increase base band using root
Click to expand...
Click to collapse
No, you can not.
Try installing adb drivers. Here: https://forum.xda-developers.com/showthread.php?t=2091922
____Mdd said:
No, you can not.
Try installing adb drivers. Here: https://forum.xda-developers.com/showthread.php?t=2091922
Click to expand...
Click to collapse
Thanks but it says drivers already installed but still I cant get fastboot devices
____Mdd said:
No, you can not.
Try installing adb drivers. Here: https://forum.xda-developers.com/showthread.php?t=2091922
Click to expand...
Click to collapse
See I can't find fastboot devices. But I can detect my mobile using adb devices. That to only when device is on.
Then I tried going to boot loader using command and then I tried fastboot device command but still it can't detect
@VPawankumar369 when you connected in bootloader, check your PC's device manager and update drivers if anything is unknown or uninstall and reinstall drivers.
It's driver problem, if you are not able to do in that PC, then ask someone else for 30 minutes.
Related
I got the link in google
Try at your own risk
http://bigota.d.miui.com/V8.1.1.0.MHOMIDI/miui_HMNote3ProGlobal_V8.1.1.0.MHOMIDI_8e5f6f8e03_6.0.zip
Source
http://en.miui.com/thread-433367-1-1.html
http://www.fonearena.com/blog/20621...allow-update-starts-rolling-out-in-india.html
Deleted
sachin.gokhale said:
Deleted
Click to expand...
Click to collapse
Not yet..
palbadi said:
I got the link in google
Try at your own risk
http://bigota.d.miui.com/V8.1.1.0.MHOMIDI/miui_HMNote3ProGlobal_V8.1.1.0.MHOMIDI_8e5f6f8e03_6.0.zip
Source
http://www.fonearena.com/blog/20621...allow-update-starts-rolling-out-in-india.html
Click to expand...
Click to collapse
what about fastboot rom
RSM10 said:
what about fastboot rom
Click to expand...
Click to collapse
Not yet released...I think
Here's the thread for this link OP, @palbadi -
http://en.miui.com/thread-433367-1-1.html
for quick review. fast battery drain and fingerprint doesn't work sometimes. takes many trys.
shanx_verma said:
Here's the thread for this link OP, @palbadi -
http://en.miui.com/thread-433367-1-1.html
Click to expand...
Click to collapse
Nice thread. However I did not install this. Many of my fnds installed and volte is working...
Will it lock the bootloader if I flash it through zcx twrp..???
And I have officially unlocked bootloader....and if it gets locked...I can unlock through miunlock tool...right..???
palbadi said:
Nice thread. However I did not install this. Many of my fnds installed and volte is working...
Click to expand...
Click to collapse
So you mean to say that if I flash this and then unlock officially, and finally flash AICP, that I will have working VoLTE on AICP??
siddlv said:
for quick review. fast battery drain and fingerprint doesn't work sometimes. takes many trys.
Click to expand...
Click to collapse
You've tried this? So, please try this -
1. Take EFS Backup from Alka TWRP while in this ROM only.
2. Flash AICP MM over it, then CM13 firmware then gapps, and without rebooting, restore your EFS from the backup you took above.
3. Please let me know if that works to enable VoLTE in MM ROM?
shanx_verma said:
So you mean to say that if I flash this and then unlock officially, and finally flash AICP, that I will have working VoLTE on AICP??
You've tried this? So, please try this -
1. Take EFS Backup from Alka TWRP while in this ROM only.
2. Flash AICP MM over it, then CM13 firmware then gapps, and without rebooting, restore your EFS from the backup you took above.
3. Please let me know if that works to enable VoLTE in MM ROM?
Click to expand...
Click to collapse
No, because AICP MM does not contain the files for volte, it has no option in SIM settings to enable volte. But you may try Sudeep's cm13 volte patch. Chance to work is rare..
palbadi said:
No, because AICP MM does not contain the files for volte, it has no option in SIM settings to enable volte. But you may try Sudeep's cm13 volte patch. Chance to work is rare..
Click to expand...
Click to collapse
Not truly, but it does have that option to enable VoLTE for SIM2. Check that out.
Nice sharing man.
Keep it up.
Can someone suggest me, if I should update or not? Some users are reporting that there is battery drain and FP issue. Is it true?
shanx_verma said:
Not truly, but it does have that option to enable VoLTE for SIM2. Check that out.
Click to expand...
Click to collapse
That's good , I did not aware of this. But I am on RR based on 7.1 with volte and don't want to revert back to 6.0.
You should try the method u mentioned.
AtomR said:
Can someone suggest me, if I should update or not? Some users are reporting that there is battery drain and FP issue. Is it true?
Click to expand...
Click to collapse
Some of my fnds has fp issues but can't say for battery.
kiran G. said:
Will it lock the bootloader if I flash it through zcx twrp..???
And I have officially unlocked bootloader....and if it gets locked...I can unlock through miunlock tool...right..???
Click to expand...
Click to collapse
Do not try to install it with twrp , it is ota package for miui recovery with unrooted system.
palbadi said:
Do not try to install it with twrp , it is ota package for miui recovery with unrooted system.
Click to expand...
Click to collapse
According to the link name it's a full recovery ROM not "incremental" update. There shouldn't be any issue if flashed via TWRP except bootloader getting locked maybe.
BlueJeans said:
According to the link name it's a full recovery ROM not "incremental" update. There shouldn't be any issue if flashed via TWRP except bootloader getting locked maybe.
Click to expand...
Click to collapse
Yes, but there is a point..
It is written full recovery rom, but at last it is said 'ota package here'
So, said this. Actually personally did not test it nor downloaded it. However by its size it is little clear that it may be full rom to be installed via zcx or lazy flasher.
Nightly..? seriously.. ? nightly builds on stable.. isnt it sounds funny..?
I have installed this update battery is good no heat and fp has little issue not major but little issue there and the rom is good and if u flash through twrp then your bootloader will get locked u have to unlock it again
I have installed resurrection mod on my phone, this part is working at the moment.
I followed a tutorial to install it using twrp, however everytime i tried to launch it i would get a pixilated yellow screen and the phone would freeze on the android logo.
I followed this guide https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
Now the phone loads into resurrection fine, however when i try to go into recovery mode the phone has black and white noise at the top like an old TV and it freezes.
I have tried installing TWRP again with no luck.
What should i try now?
whittney said:
I have installed resurrection mod on my phone, this part is working at the moment.
I followed a tutorial to install it using twrp, however everytime i tried to launch it i would get a pixilated yellow screen and the phone would freeze on the android logo.
I followed this guide https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
Now the phone loads into resurrection fine, however when i try to go into recovery mode the phone has black and white noise at the top like an old TV and it freezes.
I have tried installing TWRP again with no luck.
What should i try now?
Click to expand...
Click to collapse
I also used their BL and Modem, but it didn't work for me either. So when they ask you (in ROM Threads) to have 5.1.1 or 6.0.1, you'd better flash the whole firmware.
do you have a guide on how to do that?
whittney said:
do you have a guide on how to do that?
Click to expand...
Click to collapse
What is your RR ROM? Are u with the official TWRP installed?
JohnTryingToRoot said:
I also used their BL and Modem, but it didn't work for me either. So when they ask you (in ROM Threads) to have 5.1.1 or 6.0.1, you'd better flash the whole firmware.
Click to expand...
Click to collapse
Taivotat2 said:
What is your RR ROM? Are u with the official TWRP installed?
Click to expand...
Click to collapse
Hi dude right now i have nothing on my phone but TWRP, if it try to start my phone it shows the samsung logo, then the screen goes yellow very slow and freezes..
whittney said:
Hi dude right now i have nothing on my phone but TWRP, if it try to start my phone it shows the samsung logo, then the screen goes yellow very slow and freezes..
Click to expand...
Click to collapse
Your problem has solution, but you should give us proper and more detailed info about your issue, which RR rom you were using or people must guess it? Which the latest ROM you flashed? Are you with official TWRP?
C'mon make an effort and tell your specs correctly so any member could guide you.
Taivotat2 said:
Your problem has solution, but you should give us proper and more detailed info about your issue, which RR rom you were using or people must guess it? Which the latest ROM you flashed? Are you with official TWRP?
C'mon make an effort and tell your specs correctly so any member could guide you.
Click to expand...
Click to collapse
Sorry i have been trying to fix this all day and have not had much sleep.
This is the RR mod i used
https://forum.xda-developers.com/galaxy-j5/development/rom-resurrectionremix-v5-8-1-t3566035
This is the version of TWRP
https://twrp.me/site/update/2016/04/05/twrp-3.0.2-0-released.html
I cant seem to update TWRP to the latest version, i downloaded this image
https://twrp.me/site/update/2017/05/19/twrp-3.1.1-0-released.html
However, the image does not show up on my TWRP install explorer.
whittney said:
Sorry i have been trying to fix this all day and have not had much sleep.
This is the RR mod i used
https://forum.xda-developers.com/galaxy-j5/development/rom-resurrectionremix-v5-8-1-t3566035
This is the version of TWRP
https://twrp.me/site/update/2016/04/05/twrp-3.0.2-0-released.html
I cant seem to update TWRP to the latest version, i downloaded this image
https://twrp.me/site/update/2017/05/19/twrp-3.1.1-0-released.html
However, the image does not show up on my TWRP install explorer.
Click to expand...
Click to collapse
Download the latest and official TWRP from here
https://forum.xda-developers.com/ga...nofficial-twrp-3-1-x-galaxy-sm-j500h-t3588533
Taivotat2 said:
Download the latest and official TWRP from here
https://forum.xda-developers.com/ga...nofficial-twrp-3-1-x-galaxy-sm-j500h-t3588533
Click to expand...
Click to collapse
To note i was running android 6.0.1 marshmallow on my original rom.
TWRP now updated to 3.1.1-1.
whittney said:
To note i was running android 6.0.1 marshmallow on my original rom.
TWRP now updated to 3.1.1-1.
Click to expand...
Click to collapse
If you are with marshmallow bootloader you can flash Vince sources based ROMs. Validus by tioguda, Lineage by Vince, RR unofficial by Has.
If you want AOSPExt, Viper, RR official, you must downgrade to lollipop as stated by user above??, as these ROMs are Dyneteve's sources based ROMs which boot only with lollipop bootloader.
Taivotat2 said:
If you are with marshmallow bootloader you can flash Vince sources based ROMs. Validus by tioguda, Lineage by Vince, RR unofficial by Has.
If you want AOSPExt, Viper, RR official, you must downgrade to lollipop as stated by user above, as these ROMs are Dyneteve's sources based ROMs which boot only with lollipop bootloader.
Click to expand...
Click to collapse
Do you have a link to them i dont know what you mean.
Im sorry i am new to this and very tired.
whittney said:
do you have a guide on how to do that?
Click to expand...
Click to collapse
Plenty of explanations in J5 forums. Please take your time to read, read and more reading, as your issues were solved before and you will be fine.?
Taivotat2 said:
Plenty of explanations in J5 forums. Please take your time to read, read and more reading, as your issues were solved before and you will be fine.
Click to expand...
Click to collapse
Tried to install the rom again, after reset the samsung logo shows and my screen slowly goes yellow and freezes.
Now trying this rom
https://forum.xda-developers.com/ga...om-lineage-os-14-1-samsung-galaxy-j5-t3549552
whittney said:
Now trying this rom
https://forum.xda-developers.com/ga...om-lineage-os-14-1-samsung-galaxy-j5-t3549552
Click to expand...
Click to collapse
Stop. Mate, you must downgrade to install this one. READ at least the OP, man.
Same issue ...
There is also text saying warranty bit Kernel at the top in yellow text
whittney said:
Same issue ...
There is also text saying warranty bit Kernel at the top in yellow text
Click to expand...
Click to collapse
The message is normal. Help us to help you bro, and READ CAREFULLY the OP (first post) of each ROM thread, as you will find the necessary information to be fine.
Taivotat2 said:
The message is normal. Help us to help you bro, and READ CAREFULLY the OP (first post) of each ROM thread, as you will find the necessary information to be fine.
Click to expand...
Click to collapse
Are you referring to the android version ? So i need to find one that is 6.0.1 yes?
Like this one?
https://forum.xda-developers.com/grand-prime/development/rom-lineageos-sm-g530w-t-t1-p-t3546155
Ok still doing the yellow screen thing, but now have a new error.
Kernel is not seandroid enforcing
OOOOMMMMGGGGG. Someone to help me now?
STOCK ZUI 3.5 FOR ZUK Z2 PLUS
Chinese build
Version:8.0.0
ZUI 3.5.099 :
https://drive.google.com/file/d/1cxx-Bc2g3xdyzk2c3BCfzUNGVYv8Bs-w/view
ZUI 3.5.200 :
https://mega.nz/#!dWpBnJpL!ohLbnPnHj836ygpDfcZ7ficcJKO_Xvbpc3MVoxRsfjE
ZUI 3.5.218 :
https://drive.google.com/file/d/12B5Su__Fq5-BMeRxR_dRXlp5B9h5kQnT/view
ZUI 3.5.225 : (Twrp)
https://mega.nz/#!cscQ0bCB!5-Y0sVMMhE7dhOuyHynmKKjsaehI0K9g9Jm5WEeQjLI
ZUI 3.5.233 :
QPST:https://drive.google.com/file/d/1zjOE9uB2nhQPInR0Kqw2jUyC7fnoEkYw/view?usp=drivesdk
ZUI 3.5.243 ST :
STEPS FOR FLASHING ZUI 3.5.243 ST TWRP:
(1) Keep your Mind in working condition and make sure you are not a Pro noob.
(2)Make sure you are on TWRP 3.2.1.0
(3) Now wipe everything except internal storage,and unmount system.
(4) Flash rom
(5)Now flash Twrp 3.0.3.0
(5)Now flash gapps and magisk
(6) Now boom!! Reboot?
You are now on ZUI 3.5.243 ST
ROM- http://fmdl.ota.lenovomm.com/dls/v6...0030.1_O_ZUI_3.5.243_ST_180126_WC77C3CFD9.zip
GAPPS- https://drive.google.com/file/d/0BwCC_QZMRsaaRFVnSW1pQzJ4bDg/view
DONT ASK **** QUESTIONS THAT IT WILL BOOT OR NOT WILL IT BRICK OR LOCK BOOTLOADER, I TESTED IT MYSELF AND ITS TOTALLY SAFE . NO ENCRYPTION. AND NO INBOX SPAMS PLZ.
TRY AT UR OWN RISK
How is the rom? Did u flash it?
mmahith18 said:
How is the rom? Did u flash it?
Click to expand...
Click to collapse
Only Few flashed! Still Downloading.
Do I need to flash gapps?
mmahith18 said:
Do I need to flash gapps?
Click to expand...
Click to collapse
No
Dhinesh1999 said:
No
Click to expand...
Click to collapse
Did you tried it? Is it able to boot? Does it works?
Zholdoshbaev said:
Did you tried it? Is it able to boot? Does it works?
Click to expand...
Click to collapse
Screenshot shows its Bootable and works.. But it bricked many
Dhinesh1999 said:
Screenshot shows its Bootable and works.. Yes It works fine
Click to expand...
Click to collapse
How did you installed it?
Does it lock bootloader?
Zholdoshbaev said:
How did you installed it?
Click to expand...
Click to collapse
Twrp (Not me)
paps2k3 said:
Does it lock bootloader?
Click to expand...
Click to collapse
Probably no! (No confirmation)
People have reported it doesn't boot. Wait for a dev to release the rom guys. It'll brick your phone.
Updater process ends with error 7 for me.
Dhinesh1999 said:
Probably no! (No confirmation)
Click to expand...
Click to collapse
Gave me error 7 while trying to install on latest twrp
actually it should flash based on 3.1.117 official ROM and.... after flashing this room cannot mount the data in TWRP
chrislixu said:
actually it should flash based on 3.1.117 official ROM and.... after flashing this room cannot mount the data in TWRP
Click to expand...
Click to collapse
I think we should have stock recovery
Can i flash on zui 3.1.117 via stock recovery...?
Anyone reply...
This brick the phone, wait for more information
Do not flash guys. It has caused several bricks already. It doesnt flash for many, errors. It locks BL.
THIS THREAD IS IN THE WRONG PLACE. @xanthrax can you please move it to guides section?
Any update to baseband with new stock oreo? Someone please upload a screenshot of new baseband?.. ??
I went thru every single thread, i have the latest TWRP 3.2.1, so no Error 7.
The ROM's install (i've tried Unofficial/RR/PixelExperience/BootLeggers/Cosmic/AOSIP) and the install goes smooth, but all stuck on Bootloop!
What on earth am I doing wrong? I can't find anyone mentioning specific Kernel or where to get an OREO specific Kernel.
Is there a Boot.img ? do i need to flash it as well? (no one says so in instructions)
The last rom i've got is the Official 7.1.2 which boots without a problem.
Note: But only the 20171025 build, nothing after that even of 7.1.2 doesn't boot (just has bootloop)
Device Specs as Appear on the back: YU4711, H/W ver V2.0, S/W ver: V0.0.9_171215, (2+8) GB
Have you updated the modem from cyanogen 14.0 then try again.
BTW you should made in discussion.
Flash your Phone with stock ROM
YU_YU4711_SW_V0.0.9_HW_V1.0_171215_2016012715.zip .
This can resolve your problem.
The AndroidGuy said:
Have you updated the modem from cyanogen 14.0 then try again.
BTW you should made in discussion.
Click to expand...
Click to collapse
I didn't know there is a new Modem from CM14, do you have a link or a name?
RoHiTkUmArShArMa said:
Flash your Phone with stock ROM
YU_YU4711_SW_V0.0.9_HW_V1.0_171215_2016012715.zip .
This can resolve your problem.
Click to expand...
Click to collapse
I'm sorry, but why on earth would I want to put my phone back on v5.1.1 ?
Sefy said:
I'm sorry, but why on earth would I want to put my phone back on v5.1.1 ?
Click to expand...
Click to collapse
It have some other files also including android 5... So flash this
And then flash twrp
Reflash the entire stock firmware *except system, userdata, recovery, cache* through fastboot, then you should be good to go.
ask in Q/A thread
RoHiTkUmArShArMa said:
It have some other files also including android 5... So flash this
And then flash twrp
Click to expand...
Click to collapse
I honestly don't see the logic in putting the phone back into Stock ROM of Android 5.1.1, when I can use it with 7.1.2 without a problem and only flashing of new ROM's is an issue.
But I have found something that may give more information, this is HW_V2 , so i'm assuming this device is the YU YUNIQUE 2 which is basically identical but with 2GB ram instead of 1GB ram.
Sefy said:
I honestly don't see the logic in putting the phone back into Stock ROM of Android 5.1.1, when I can use it with 7.1.2 without a problem and only flashing of new ROM's is an issue.
But I have found something that may give more information, this is HW_V2 , so i'm assuming this device is the YU YUNIQUE 2 which is basically identical but with 2GB ram instead of 1GB ram.
Click to expand...
Click to collapse
Can you able to boot into official LineageOS without editing updater-script?
The AndroidGuy said:
Can you able to boot into official LineageOS without editing updater-script?
Click to expand...
Click to collapse
As I mentioned, I can boot into 7.1.2 (that's LineageOS), but the latest i'm able to boot is 25/10/2017 and any build after, goes into bootloop.
Sefy said:
As I mentioned, I can boot into 7.1.2 (that's LineageOS), but the latest i'm able to boot is 25/10/2017 and any build after, goes into bootloop.
Click to expand...
Click to collapse
Maybe it is time to change device.
The AndroidGuy said:
Maybe it is time to change device.
Click to expand...
Click to collapse
Right....
I resolved the issue after way too much digging around, the issue was flashing the specific NON-HLOS.bin and now I can flash v8.x and v9.x roms
The one that resolved my issue came from this link: https://androidfilehost.com/?fid=817550096634760193
Help me
Can you tell me how to use this file plzz and thnx for solving this prb @Sefy
wise7709 said:
Can you tell me how to use this file plzz and thnx for solving this prb @Sefy
Click to expand...
Click to collapse
You need to flash it using: fastboot flash modem non-hls.bin
Then reboot and flashing of the ROM should go correctly and for me atleast, it booted up.
I need help, I unlocked bootloader installed custom rom and everything was fine, but suddenly the fingerprint reader stopped working.
Someone could help me? I need the fingerprint because the power button was broken.
BORNIOS said:
I need help, I unlocked bootloader installed custom rom and everything was fine, but suddenly the fingerprint reader stopped working.
Someone could help me? I need the fingerprint because the power button was broken.
Click to expand...
Click to collapse
Please mention in detail what did you do.
What custom ROM did you install??
What is your baseband verision (Please mention complete baseband)
Was it working earlier on the same Custom ROM and stopped working all of a sudden?
What troubleshooting did you try......reboot, clean flashing again, etc??
an apology for the delay...
First of all thanks for answering, information:
As most do the e unlocking of bootloader to install the TWRP of rajatgupta1998 same that I used to install the ROM Havoc 8.1, installation and use without problems until a couple of days after I no longer had the option of fingerprint in configuration or reacted the sensor for nothing, make several full wipes to see if I recovered and nothing, install Bliss 8.1, Arrow 9.0 and I can not get my fingerprint.
Currently I have the last stock ROM of Jerome-X, assuming I would recover the fingerprint with stock without success ...
My baseband is M8952_70030.25.03.62.02e ATHENE_LATAM_CUST.
Kernel ElementaryX G4.
If there is anything else that I must inform to receive help, I am available.
BORNIOS said:
an apology for the delay...
First of all thanks for answering, information:
As most do the e unlocking of bootloader to install the TWRP of rajatgupta1998 same that I used to install the ROM Havoc 8.1, installation and use without problems until a couple of days after I no longer had the option of fingerprint in configuration or reacted the sensor for nothing, make several full wipes to see if I recovered and nothing, install Bliss 8.1, Arrow 9.0 and I can not get my fingerprint.
Currently I have the last stock ROM of Jerome-X, assuming I would recover the fingerprint with stock without success ...
My baseband is M8952_70030.25.03.62.02e ATHENE_LATAM_CUST.
Kernel ElementaryX G4.
If there is anything else that I must inform to receive help, I am available.
Click to expand...
Click to collapse
Did you try flashing stock rom again??
There can be some other issue too like a hardware problem or something else.
Heeth21 said:
Did you try flashing stock rom again??
There can be some other issue too like a hardware problem or something else.
Click to expand...
Click to collapse
Original Stock not yet, only an optimized version of stock
BORNIOS said:
Original Stock not yet, only an optimized version of stock
Click to expand...
Click to collapse
Try flashing stock ROM again and please reply if it worked.
Heeth21 said:
Try flashing stock ROM again and please reply if it worked.
Click to expand...
Click to collapse
Ok, try and comment
BORNIOS said:
Ok, try and comment
Click to expand...
Click to collapse
Did it work?
Not Work
Heeth21 said:
Did it work?
Click to expand...
Click to collapse
restore factory, bootlogo recovery stock firmware, everything and it did not work, I get tired and I can not recover the fingerprint
BORNIOS said:
restore factory, bootlogo recovery stock firmware, everything and it did not work, I get tired and I can not recover the fingerprint
Click to expand...
Click to collapse
Do you mean restoring from TWRP??
You should flash Stock ROM.
If it still doesn't work, please attach screenshot of about device.
No TWRP
I Flash Stock with ADB/Fastboot
BORNIOS said:
No TWRP
I Flash Stock with ADB/Fastboot
Click to expand...
Click to collapse
Please attach a screenshot of about device.