Database Users

Samsung Galaxy S3 Neo - camera server error

Hi,
I will say this because i think it matters a lot: first camera problems where after installing new roms like CM 12.1 but there was a nice cam fix so it was good. Yesterday i decided to put a new kernel and I bassicaly screwed everything up. My device didnt boot, I got a black screen after boot logo, so I decided to performa a wipe, and accidentaly wiped every f***ng particion, including system. I thoug to my self "Oh thank God i still have my TWRP recovery", but it was even worse. TWRP couldn't flash any roms ( I still had a CM rom on my sd card) the recovery would just blink and reboot again to it, I was done there completely. Read some forums, after that downloaded a rom for my phone from sammobile. Everything works exept rear camera. I checked that by code *#0*#. I installed different stock roms with different PDA's. I'm guessing that that is a issue that persists from a custom rom? Please help brothers. :highfive:

Why dont you flash a recovery and flash again cm with the camera fix?

Cm cam fix won't work
Flash Germany latest firmware, my device faced that too, but after i flashed dbt firmware, everything seems good ?

Enry997S3 said:
Why dont you flash a recovery and flash again cm with the camera fix?
Click to expand...
Click to collapse
I dont want to have CM anymore. Maybe at this time Thx tho

ziad311 said:
Cm cam fix won't work
Flash Germany latest firmware, my device faced that too, but after i flashed dbt firmware, everything seems good ��
Click to expand...
Click to collapse
Bro pls help http://postimg.org/image/a79kd2339/

ziad311 said:
Cm cam fix won't work
Flash Germany latest firmware, my device faced that too, but after i flashed dbt firmware, everything seems good ��
Click to expand...
Click to collapse
albertoblah said:
Bro pls help http://postimg.org/image/a79kd2339/
Click to expand...
Click to collapse
UPDATE: MAN I LOVE YOU #nohomo . My mistake when installing this german region was that i ticket re-particion. I looked that up on the internet that u should not do that. My camera is back again. Manny thanks!
Kind regards,
Alberto

How to Revert2Cyanogenmod13 after flashing OOS 3

I was looking for instructions on this before flashing OOS beta, and can't find any.

hunter_bruhh said:
I was looking for instructions on this before flashing OOS beta, and can't find any.
Click to expand...
Click to collapse
Hello ?
And ?
What do you want ?
Are you sure you searched well ?
Search better 'cause it exists ?
Thanks.

I too have the same problem.

http://forum.xda-developers.com/oneplus-2/general/firstaid-zip-revert-h2os-mm-beta-to-lp-t3306967
try this method. I tried and solved the problem.

You can look at "H2OS Marshmallow debloated" thread.

hunter_bruhh said:
I was looking for instructions on this before flashing OOS beta, and can't find any.
Click to expand...
Click to collapse
tbiwalkar said:
I too have the same problem.
Click to expand...
Click to collapse
You can find a detailed guide below on every possible thing you want to do before after flashing OOS3 .
https://forums.oneplus.net/threads/installation-instructions-faqs-oxygenos-3-0-0.439108/
lockmunk said:
http://forum.xda-developers.com/oneplus-2/general/firstaid-zip-revert-h2os-mm-beta-to-lp-t3306967
try this method. I tried and solved the problem.
Click to expand...
Click to collapse
Isn't that the thread which should be used in case the user encounters any problem when reverting from OOS3/H2OS based roms ?
I guess the OP asked for instructions on how to get back to CM after flashing OOS3 , until and unless he screws up , he wont be needing it

mdaamir1989 said:
Isn't that the thread which should be used in case the user encounters any problem when reverting from OOS3/H2OS based roms ?
I guess the OP asked for instructions on how to get back to CM after flashing OOS3 , until and unless he screws up , he wont be needing it
Click to expand...
Click to collapse
I also faced same problem as him, which is I want to revert to CM13 after flash OOS3

Here is the simple way to move back and forth...I do it regularly...sometimes more than once a day! Keep in mind this-CM13 and Oxygen 2 versions are on the old TWRP and Hydrogen MM and Oxygen 3.0 are on the new TWRP. So look up two zips one is the revert2lollipop and flash that before flashing CM13 or Oxygen 2.O Roms. It will boot you into the correct TWRP. Find the zip H2OS_TWRP3+MMFIRMW and flash that before flashing Oxygen 3 or Hydrogen MM. It will boot you into the right TWRP. So my method if I'm on CM13 is just to boot into TWRP flash H2OS_TWRP3+MMFIRMW and it will reboot and then wipe all but internal and then flash either Hydrogen MM or the Oxygen 3 ROM or the appropriate nandroid backup...if you are in Oxygen 3 just flash the revert2lollipop and it will reboot in to the right TWRP then full wipe and flash CM13. I have done it many times with no issues. Some CM13 also require a new modem but just flash that if you get FCs in the setup...
There is a topic in development that is appropriately titled where you can find the two zip files.
Sent from my ONE A2005 using Tapatalk

Samsing j5 j500fn recovery mode frozen - resurrection mod

I have installed resurrection mod on my phone, this part is working at the moment.
I followed a tutorial to install it using twrp, however everytime i tried to launch it i would get a pixilated yellow screen and the phone would freeze on the android logo.
I followed this guide https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
Now the phone loads into resurrection fine, however when i try to go into recovery mode the phone has black and white noise at the top like an old TV and it freezes.
I have tried installing TWRP again with no luck.
What should i try now?

whittney said:
I have installed resurrection mod on my phone, this part is working at the moment.
I followed a tutorial to install it using twrp, however everytime i tried to launch it i would get a pixilated yellow screen and the phone would freeze on the android logo.
I followed this guide https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
Now the phone loads into resurrection fine, however when i try to go into recovery mode the phone has black and white noise at the top like an old TV and it freezes.
I have tried installing TWRP again with no luck.
What should i try now?
Click to expand...
Click to collapse
I also used their BL and Modem, but it didn't work for me either. So when they ask you (in ROM Threads) to have 5.1.1 or 6.0.1, you'd better flash the whole firmware.

do you have a guide on how to do that?

whittney said:
do you have a guide on how to do that?
Click to expand...
Click to collapse
What is your RR ROM? Are u with the official TWRP installed?

JohnTryingToRoot said:
I also used their BL and Modem, but it didn't work for me either. So when they ask you (in ROM Threads) to have 5.1.1 or 6.0.1, you'd better flash the whole firmware.
Click to expand...
Click to collapse
Taivotat2 said:
What is your RR ROM? Are u with the official TWRP installed?
Click to expand...
Click to collapse
Hi dude right now i have nothing on my phone but TWRP, if it try to start my phone it shows the samsung logo, then the screen goes yellow very slow and freezes..

whittney said:
Hi dude right now i have nothing on my phone but TWRP, if it try to start my phone it shows the samsung logo, then the screen goes yellow very slow and freezes..
Click to expand...
Click to collapse
Your problem has solution, but you should give us proper and more detailed info about your issue, which RR rom you were using or people must guess it? Which the latest ROM you flashed? Are you with official TWRP?
C'mon make an effort and tell your specs correctly so any member could guide you.

Taivotat2 said:
Your problem has solution, but you should give us proper and more detailed info about your issue, which RR rom you were using or people must guess it? Which the latest ROM you flashed? Are you with official TWRP?
C'mon make an effort and tell your specs correctly so any member could guide you.
Click to expand...
Click to collapse
Sorry i have been trying to fix this all day and have not had much sleep.
This is the RR mod i used
https://forum.xda-developers.com/galaxy-j5/development/rom-resurrectionremix-v5-8-1-t3566035
This is the version of TWRP
https://twrp.me/site/update/2016/04/05/twrp-3.0.2-0-released.html
I cant seem to update TWRP to the latest version, i downloaded this image
https://twrp.me/site/update/2017/05/19/twrp-3.1.1-0-released.html
However, the image does not show up on my TWRP install explorer.

whittney said:
Sorry i have been trying to fix this all day and have not had much sleep.
This is the RR mod i used
https://forum.xda-developers.com/galaxy-j5/development/rom-resurrectionremix-v5-8-1-t3566035
This is the version of TWRP
https://twrp.me/site/update/2016/04/05/twrp-3.0.2-0-released.html
I cant seem to update TWRP to the latest version, i downloaded this image
https://twrp.me/site/update/2017/05/19/twrp-3.1.1-0-released.html
However, the image does not show up on my TWRP install explorer.
Click to expand...
Click to collapse
Download the latest and official TWRP from here
https://forum.xda-developers.com/ga...nofficial-twrp-3-1-x-galaxy-sm-j500h-t3588533

Taivotat2 said:
Download the latest and official TWRP from here
https://forum.xda-developers.com/ga...nofficial-twrp-3-1-x-galaxy-sm-j500h-t3588533
Click to expand...
Click to collapse
To note i was running android 6.0.1 marshmallow on my original rom.
TWRP now updated to 3.1.1-1.

whittney said:
To note i was running android 6.0.1 marshmallow on my original rom.
TWRP now updated to 3.1.1-1.
Click to expand...
Click to collapse
If you are with marshmallow bootloader you can flash Vince sources based ROMs. Validus by tioguda, Lineage by Vince, RR unofficial by Has.
If you want AOSPExt, Viper, RR official, you must downgrade to lollipop as stated by user above??, as these ROMs are Dyneteve's sources based ROMs which boot only with lollipop bootloader.

Taivotat2 said:
If you are with marshmallow bootloader you can flash Vince sources based ROMs. Validus by tioguda, Lineage by Vince, RR unofficial by Has.
If you want AOSPExt, Viper, RR official, you must downgrade to lollipop as stated by user above, as these ROMs are Dyneteve's sources based ROMs which boot only with lollipop bootloader.
Click to expand...
Click to collapse
Do you have a link to them i dont know what you mean.
Im sorry i am new to this and very tired.

whittney said:
do you have a guide on how to do that?
Click to expand...
Click to collapse
Plenty of explanations in J5 forums. Please take your time to read, read and more reading, as your issues were solved before and you will be fine.?

Taivotat2 said:
Plenty of explanations in J5 forums. Please take your time to read, read and more reading, as your issues were solved before and you will be fine.
Click to expand...
Click to collapse
Tried to install the rom again, after reset the samsung logo shows and my screen slowly goes yellow and freezes.

Now trying this rom
https://forum.xda-developers.com/ga...om-lineage-os-14-1-samsung-galaxy-j5-t3549552

whittney said:
Now trying this rom
https://forum.xda-developers.com/ga...om-lineage-os-14-1-samsung-galaxy-j5-t3549552
Click to expand...
Click to collapse
Stop. Mate, you must downgrade to install this one. READ at least the OP, man.

Same issue ...
There is also text saying warranty bit Kernel at the top in yellow text

whittney said:
Same issue ...
There is also text saying warranty bit Kernel at the top in yellow text
Click to expand...
Click to collapse
The message is normal. Help us to help you bro, and READ CAREFULLY the OP (first post) of each ROM thread, as you will find the necessary information to be fine.

Taivotat2 said:
The message is normal. Help us to help you bro, and READ CAREFULLY the OP (first post) of each ROM thread, as you will find the necessary information to be fine.
Click to expand...
Click to collapse
Are you referring to the android version ? So i need to find one that is 6.0.1 yes?
Like this one?
https://forum.xda-developers.com/grand-prime/development/rom-lineageos-sm-g530w-t-t1-p-t3546155

Ok still doing the yellow screen thing, but now have a new error.
Kernel is not seandroid enforcing

OOOOMMMMGGGGG. Someone to help me now?

Moto g4 Plus root issue

First i unlocked the bootloader
Second i flashed twrp.
Thirdly i flashed ElementalX-G4-2.01 and thn supersu
Now the phone is not booting atall only black screen is there any resolution or did i make any wrong flash please let me know but still i can access twrp.
Btw My phone is running on Android 7.0 and twrp 3.2.1.0
I tried google and all still no resolution.
Now i tried custom roms as well still same not booting up atall.

Akshaykoppula said:
First i unlocked the bootloader
Second i flashed twrp.
Thirdly i flashed ElementalX-G4-2.01 and thn supersu
Now the phone is not booting atall only black screen is there any resolution or did i make any wrong flash please let me know but still i can access twrp.
Btw My phone is running on Android 7.0 and twrp 3.2.1.0
I tried google and all still no resolution.
Now i tried custom roms as well still same not booting up atall.
Click to expand...
Click to collapse
Have you tried to wipe caches too? I guess your referring to https://forum.xda-developers.com/mo...g4-plus-supersu-android-t3587918/post71817560 right?

strongst said:
Have you tried to wipe caches too? I guess your referring to https://forum.xda-developers.com/mo...g4-plus-supersu-android-t3587918/post71817560 right?
Click to expand...
Click to collapse
i have tried now it seems working thanks. But custom rom having too many issues with diffrent kernel
can u suggest the official moto or any stable rom with kernel.

Akshaykoppula said:
i have tried now it seems working thanks. But custom rom having too many issues with diffrent kernel
can u suggest the official moto or any stable rom with kernel.
Click to expand...
Click to collapse
Official ressurection remix is very good, or stock rom.

YU Yunique - Unable to boot ANY Oreo ROM! [Solved]

I went thru every single thread, i have the latest TWRP 3.2.1, so no Error 7.
The ROM's install (i've tried Unofficial/RR/PixelExperience/BootLeggers/Cosmic/AOSIP) and the install goes smooth, but all stuck on Bootloop!
What on earth am I doing wrong? I can't find anyone mentioning specific Kernel or where to get an OREO specific Kernel.
Is there a Boot.img ? do i need to flash it as well? (no one says so in instructions)
The last rom i've got is the Official 7.1.2 which boots without a problem.
Note: But only the 20171025 build, nothing after that even of 7.1.2 doesn't boot (just has bootloop)
Device Specs as Appear on the back: YU4711, H/W ver V2.0, S/W ver: V0.0.9_171215, (2+8) GB

Have you updated the modem from cyanogen 14.0 then try again.
BTW you should made in discussion.

Flash your Phone with stock ROM
YU_YU4711_SW_V0.0.9_HW_V1.0_171215_2016012715.zip .
This can resolve your problem.

The AndroidGuy said:
Have you updated the modem from cyanogen 14.0 then try again.
BTW you should made in discussion.
Click to expand...
Click to collapse
I didn't know there is a new Modem from CM14, do you have a link or a name?

RoHiTkUmArShArMa said:
Flash your Phone with stock ROM
YU_YU4711_SW_V0.0.9_HW_V1.0_171215_2016012715.zip .
This can resolve your problem.
Click to expand...
Click to collapse
I'm sorry, but why on earth would I want to put my phone back on v5.1.1 ?

Sefy said:
I'm sorry, but why on earth would I want to put my phone back on v5.1.1 ?
Click to expand...
Click to collapse
It have some other files also including android 5... So flash this
And then flash twrp

Reflash the entire stock firmware *except system, userdata, recovery, cache* through fastboot, then you should be good to go.

ask in Q/A thread

RoHiTkUmArShArMa said:
It have some other files also including android 5... So flash this
And then flash twrp
Click to expand...
Click to collapse
I honestly don't see the logic in putting the phone back into Stock ROM of Android 5.1.1, when I can use it with 7.1.2 without a problem and only flashing of new ROM's is an issue.
But I have found something that may give more information, this is HW_V2 , so i'm assuming this device is the YU YUNIQUE 2 which is basically identical but with 2GB ram instead of 1GB ram.

Sefy said:
I honestly don't see the logic in putting the phone back into Stock ROM of Android 5.1.1, when I can use it with 7.1.2 without a problem and only flashing of new ROM's is an issue.
But I have found something that may give more information, this is HW_V2 , so i'm assuming this device is the YU YUNIQUE 2 which is basically identical but with 2GB ram instead of 1GB ram.
Click to expand...
Click to collapse
Can you able to boot into official LineageOS without editing updater-script?

The AndroidGuy said:
Can you able to boot into official LineageOS without editing updater-script?
Click to expand...
Click to collapse
As I mentioned, I can boot into 7.1.2 (that's LineageOS), but the latest i'm able to boot is 25/10/2017 and any build after, goes into bootloop.

Sefy said:
As I mentioned, I can boot into 7.1.2 (that's LineageOS), but the latest i'm able to boot is 25/10/2017 and any build after, goes into bootloop.
Click to expand...
Click to collapse
Maybe it is time to change device.

The AndroidGuy said:
Maybe it is time to change device.
Click to expand...
Click to collapse
Right....

I resolved the issue after way too much digging around, the issue was flashing the specific NON-HLOS.bin and now I can flash v8.x and v9.x roms
The one that resolved my issue came from this link: https://androidfilehost.com/?fid=817550096634760193

Help me
Can you tell me how to use this file plzz and thnx for solving this prb @Sefy

wise7709 said:
Can you tell me how to use this file plzz and thnx for solving this prb @Sefy
Click to expand...
Click to collapse
You need to flash it using: fastboot flash modem non-hls.bin
Then reboot and flashing of the ROM should go correctly and for me atleast, it booted up.