Good morning, I encountered a problem with my XTRONS head unit PB78FSFP-S
Occasionally after doing the shutdown procedure, the head unit returns the error message that I am attaching to this thread.
After selecting "try again" the head unit restarts without any problem.
I have already done several HARD RESETS, without solving this problem, could you tell me what this error message is due to?
Thanks
I use XTRONS 04.09.2018 Android 8.0 "update.zip" and v2.94 MTCD-E and CAR LAUNCHER PRO
Related
Hi,
I Bought this android head unit a month ago. After having some problem with apps i decided to set head unit to factory settings. After that i got stuck on bootloop
I trie reseting it via RST button but, that didn't helped. So i think i need somehow to get into recovery for data wipe. None of button combination leeds me there.
Does anybody now, how to get into recovery mode ?
i Have video uploaded into youtube, but as im new in this forum, i can't paste it here.
youtube com/watch?v=_zYjHY9D0kc
Tried:
- various button combination (reset, reset + power, etc)
- Connect USB male<->male connector to head unit and PC. No response, pc wont find new device (android adb)
- Solder wires to pins on mainboard GND, VCC, D+, D- and connect to pc. No response
- contacted seller. He aproved that android is stuck and head unit needs to be restored from update (or data wipe out). Seller asked me for my email, but its already two weeks after this problem and still no instruction what to do.
Please HELP!!! ((
Isudar h53
hello did you solve the problem? I have the same
I just bought a Belsee Tesla style Android head unit with PX6 (double din, 1980*1080, 4G, 32G)
After installation for about 1 h, and I changed the boot logo to a new high resolution one. Then it did not work, stop at boot logo
The seller has send me a px6_format zip file and let me put it into a disk, plug the disk and restart the unit to recovery. But this method did not work. The unit kept at logo with no reaction.
I also tried many other method to try to enter recovery mod, but no luck.
Who can help me with this? Happy to pay for it! Thanks
pictures of this unit attached
ibb.co/z225dCS
ibb.co/StL3zwS
ibb.co/SvCYCzx
ibb.co/4FdgX4r
Did you try use a pin to reset the unit?
Also, where did you plug in the USB with the new update PX6 zip?
Try to put it in the USB slot on the unit, not the two from the connection cords.
JohnnyMHo said:
Did you try use a pin to reset the unit?
Also, where did you plug in the USB with the new update PX6 zip?
Try to put it in the USB slot on the unit, not the two from the connection cords.
Click to expand...
Click to collapse
I've tried every method, but no luck.
I removed the core board, and post it to the seller for an exchange. Then it works again. But the radio now cannot find any channel.
Terrible head unit, strongly suggest every one do not buy this type of trash.
Hello people
I ain’t so sure if I got ts18 or ts10 I can’t access the head unit to check, anyways I’m failing to boot my head unit it stuck on the logo
I tried to download fixes via seller’s website
And just never mind what what I tried it always ended the same
I tried to force and update via ignition method with rst button, and via attaching key1 wire to ground/negative
I got 2 usb ports one of them finishes the update so quick and do nothing
And the other one fails and write me this”init fat32 storage fail”
Hello any solution?
Murdysouly said:
Hello people
I ain’t so sure if I got ts18 or ts10 I can’t access the head unit to check, anyways I’m failing to boot my head unit it stuck on the logo
I tried to download fixes via seller’s website
And just never mind what what I tried it always ended the same
I tried to force and update via ignition method with rst button, and via attaching key1 wire to ground/negative
I got 2 usb ports one of them finishes the update so quick and do nothing
And the other one fails and write me this”init fat32 storage fail”
Click to expand...
Click to collapse
Hey there,
If the update completes really quick, maybe it's because it isn't going properly.
Try various other usb sticks.
Normally you should have the time to read every steps during the update "writing partition blabla1, writing partition blabla2 ..." aso asf.
I had to try a dozen usb sticks before finding one that worked for me.
May be worth the try.
Godspeed
Hello All,
I am in need of assistance with my 13.3' HA2208-Scout head unit Model: PX6 running Android 10. I have had it for a little over a year with no issues. I shut the vehicle off when I got home, and the next day when I went to leave the side screen buttons stopped working, and the touch screen was unresponsive.
I placed the unit in recovery mode and reset the cache with no change. I then completed a factory reset with no change. After reviewing the logs I found that I am getting a:
GTP-Error I2C Read: 0x0847, 1 bytes failed, errcode: -6! Process reset.
It will do this error and fail 5 time, then presents:
<goodix_ts_probe>_4411 I2C communication ERROR!
<goodix_ts_probe>_4502 prob error !!!!!!!!!!!!!!!
CPU: Rockchip RK3399, running Linux 4.19.111
I have emailed Dasiata 15 times with only 1 response asking about my order number, and can not seem to get any technical support. I have searched the forum with no luck finding this same issue so I am hoping someone may be able to assist. This is a completely stock unit with no modification to hardware or software.
Thanks,
Hello all,
My head unit failed to boot on the first start: I saw the Android splash screen for a few seconds, and then the device switched off.
Since I don't have access to the Android OS, I am unable to reinstall the OTA zip file from a USB stick. I don't have any backup files that I can use to flash the motherboard through its USB port.
I'm wondering if it's possible to revive the head unit in this case and, if so, how?
Many thanks in advance for your help.
PS. : ref. E9212B V0.1/A
Search results for query: 9212B
forum.xda-developers.com