Hello all,
My head unit failed to boot on the first start: I saw the Android splash screen for a few seconds, and then the device switched off.
Since I don't have access to the Android OS, I am unable to reinstall the OTA zip file from a USB stick. I don't have any backup files that I can use to flash the motherboard through its USB port.
I'm wondering if it's possible to revive the head unit in this case and, if so, how?
Many thanks in advance for your help.
PS. : ref. E9212B V0.1/A
Search results for query: 9212B
forum.xda-developers.com
Related
I just bought a Belsee Tesla style Android head unit with PX6 (double din, 1980*1080, 4G, 32G)
After installation for about 1 h, and I changed the boot logo to a new high resolution one. Then it did not work, stop at boot logo
The seller has send me a px6_format zip file and let me put it into a disk, plug the disk and restart the unit to recovery. But this method did not work. The unit kept at logo with no reaction.
I also tried many other method to try to enter recovery mod, but no luck.
Who can help me with this? Happy to pay for it! Thanks
pictures of this unit attached
ibb.co/z225dCS
ibb.co/StL3zwS
ibb.co/SvCYCzx
ibb.co/4FdgX4r
Did you try use a pin to reset the unit?
Also, where did you plug in the USB with the new update PX6 zip?
Try to put it in the USB slot on the unit, not the two from the connection cords.
JohnnyMHo said:
Did you try use a pin to reset the unit?
Also, where did you plug in the USB with the new update PX6 zip?
Try to put it in the USB slot on the unit, not the two from the connection cords.
Click to expand...
Click to collapse
I've tried every method, but no luck.
I removed the core board, and post it to the seller for an exchange. Then it works again. But the radio now cannot find any channel.
Terrible head unit, strongly suggest every one do not buy this type of trash.
Hello, here is currently I have a problem with my monitor, Avin 10.25 PX6 8.1 I have a message NO SIGNAL that appears at boot nothing did I tried USB it is not detected, I was told about the SOM, i eeseyer to do some research on the internet but there is not a lot of information on the creation of a OTG USB to enter recovery mode I would like to have your opinions I made a video of the problem if you needed more of information do not hesitate. Thank you
Check this out, if this is the unit you have.
https://github.com/chinesebmwheadunits/chinesebmwheadunits.github.io/wiki/Recovery
Is there also a way for Android 10 PX6 Devices ? I have flashed a flasches Rom on the weekend and now it still responds to touch bedinung but shows only stripes on the display.
My head unit is TS18 UIS8581 android 11 with 768x1024 resolution i make a hi resolution animation boot and now it stack i tray to go to recovery mode to make factory set can not know how my device just have Rest button and no RGB light
Any one help
I send to seller but I don't get answer yet
I contacted the seller and he sent me a file for updating to put it in a pen and then update the device and it was done but it did not take seconds and after reboot nathing happened to the problem see video attachment
now am sour that HU not read file from USB i delete All File from USB and it give my same action , any thoughts ??
My head unit has started to reboot every 5-10 seconds after it gets to home screen.
It's very difficult to get to any settings as there's very little time to do so.
I've tried performing an update via USB but it's impossible as it reboots during the process.
Could someone tell me what I could do in my situation?
Is there a way I could get to recovery settings?
Android: YT9213A_0009_V001
Android os: Android 10.1
XY AUTO: 5.3 (X2)
CAN Pro: 3.3 (X2)
DDR: 2G
FLASH: 32G
cpu: A7 1.3GHz x 4
display: 1024x600
MCU: 3.5 (X2)
hello
i had the same exact problem yesterday and i solved it by taking the unit out and flashing it with spf tool.
i used a laptop adapter to power up the unit and connect it to computer by a usb-c phone cable( i have a usbc port on the pc).
i followed this bellow guide to create a backup and then i flashed (in spf tool DOWNLOAD ONLY) only the userdata.img taken out an update image of an update (any update for yt9213a will do).
there is a very detailed video about hot to do a backup with spf flash. after that i improvised and kept finger crossed.
https://forum.xda-developers.com/t/guide-android-6-supermod-for-yt9213aj-yt9216b-yt9217b-yt9218ch-root-
viper4android-twrp-custom-ui-brick-recovery-and-more.4184999/page-39
good luck!
Try this
velles2003 said:
Try this
Click to expand...
Click to collapse
Thank you very much! After reading your first post I finally got around to removing the head-unit to see what I’m working with. Now I know what you mean by laptop charger and will look into purchasing one to connect to it. I now feel confident this can be easily resolved. Thanks again!
basically, any charger that outputs 12V CC is good. just connect the +12V to yellow+red cable and the -12V to black. This is to be sure you can power the headunit.
you then need some way of connecting it to the PC. either via a USB male to male or via a USB A to USB C.
you then need to install the drivers like in the video before and then just restore in SPF flash tool the USRDATA.IMG and if you like, also ANDROID (system.IMG)
DO NOT FLASH PRELOADER.
you have the same unit as mine so my backup should work for you.
I have made an archive with the SPF Flashtool and my backup lof android 6.0, available here:
Google Drive - Virus scan warning
drive.google.com
Hello people
I ain’t so sure if I got ts18 or ts10 I can’t access the head unit to check, anyways I’m failing to boot my head unit it stuck on the logo
I tried to download fixes via seller’s website
And just never mind what what I tried it always ended the same
I tried to force and update via ignition method with rst button, and via attaching key1 wire to ground/negative
I got 2 usb ports one of them finishes the update so quick and do nothing
And the other one fails and write me this”init fat32 storage fail”
Hello any solution?
Murdysouly said:
Hello people
I ain’t so sure if I got ts18 or ts10 I can’t access the head unit to check, anyways I’m failing to boot my head unit it stuck on the logo
I tried to download fixes via seller’s website
And just never mind what what I tried it always ended the same
I tried to force and update via ignition method with rst button, and via attaching key1 wire to ground/negative
I got 2 usb ports one of them finishes the update so quick and do nothing
And the other one fails and write me this”init fat32 storage fail”
Click to expand...
Click to collapse
Hey there,
If the update completes really quick, maybe it's because it isn't going properly.
Try various other usb sticks.
Normally you should have the time to read every steps during the update "writing partition blabla1, writing partition blabla2 ..." aso asf.
I had to try a dozen usb sticks before finding one that worked for me.
May be worth the try.
Godspeed