My head unit is TS18 UIS8581 android 11 with 768x1024 resolution i make a hi resolution animation boot and now it stack i tray to go to recovery mode to make factory set can not know how my device just have Rest button and no RGB light
Any one help
I send to seller but I don't get answer yet
I contacted the seller and he sent me a file for updating to put it in a pen and then update the device and it was done but it did not take seconds and after reboot nathing happened to the problem see video attachment
now am sour that HU not read file from USB i delete All File from USB and it give my same action , any thoughts ??
Related
Hey guys
My car head unit is from royal for hyundai elantra and it's stuck on the starting Android logo and can't get past it so can you please help me fix it? Thank you
No one has any idea on how to fix it?
Yasser_Atyah said:
No one has any idea on how to fix it?
Click to expand...
Click to collapse
It is probably in a boot loop. What did you install or do to get it in that boot loop?
If you didn't do anything, you might try to rest the unit or disconnect if from 12V and wait at least 2 hours.
And edit your first post to change the title. I assume it is "resetting" and not "resting"
surfer63 said:
It is probably in a boot loop. What did you install or do to get it in that boot loop?
If you didn't do anything, you might try to rest the unit or disconnect if from 12V and wait at least 2 hours.
And edit your first post to change the title. I assume it is "resetting" and not "resting"
Click to expand...
Click to collapse
1- no I didn't do anything to it. It was working perfectly and I had to switch the car off and then turned it on the boot loop issue started.
2- how do I disconnect it from 12v? Sorry but I am have zero experience when it comes to cars.
3- and you are right it's resetting but I have no idea how to edit the title of thread.
Yasser_Atyah said:
1- no I didn't do anything to it. It was working perfectly and I had to switch the car off and then turned it on the boot loop issue started.
2- how do I disconnect it from 12v? Sorry but I am have zero experience when it comes to cars.
3- and you are right it's resetting but I have no idea how to edit the title of thread.
Click to expand...
Click to collapse
2- Get it out of the dashboard and disconnect the harness or the power plug or take the fuse out.
3- like I said. Edit the first post. It will also make the title editable.
Do you have a small reset hole in the front of your unit? If so, try to reset it with a "pointy" thing like a needle or something else.
Try what surfer63 says, because he has way more experience than most of the people about Android Head Units on this board. If all else fails try what I did after having a bootlooping HU for nearly 4 months :S
Had the same issue. The HU (with 2 USB ports) was some unknown brand called Funrover loosely based on Joying firmware. What worked for me was
- Download the suitable Joying firmware : joyingauto.com/blog/post/joying-intel-sofia-android-car-stereo-software-update
- Extract it on the PC and then copy the firmware files on to a freshly (FAT32) formatted USB drive
- Plug in the USB drive to your HU USB port (1?)
- Since your HU is already bootlooping, plug in a keyboard and use the following key combination> Alt + Print Scr + tapping i (or e, both worked for me) to get in to recover
- Ideally the recovery option will detect the plugged in USB and start reflashing the firmware so that you will be able to use the HU again.
Hello! I recently purchased a navigation for my Golf 5 2008, it's a mekede 188l 8227L but i have an annoying problem...it's not keeping settings, if i make a change on the screen, idk, the wallpaper for example, after restarting it(removing the key from the ignition) and powering on, the settings are like defaults...even the language setting are resetting....what can i do?
And also i have a problem with the parking sensors...i have installed the rear camera, it works when i put ihe car in reverse mode but the sensors are not working, it's not displaying anything.
Thanks!
Hi, I think the wiring is wrong u use the ignition line but you must use the battery line to have continuous power. Sry for my bad English I hope u understand a little bit.
The ignition line is to power/boot up the head unit the battery line is to keep little bit power for the standby.
Regards
Aggro82
Okay, but if i connect those wires, it will drain my battery?
Connect the yellow wire to the battery 12+ constant, and the red wire to the ignition (Acc) wire
hi
i have the same problem
DO NOT connect the car radio to the battery
this is not a solution
the problem you have is the Firmware 100%
ask the seller for another firmware or try this
Download the Firmware from the link
https://yadi.sk/d/9hmrLUB8am6U7Q?spm...14913e5fbGNit4
download the file and copy the file to a usb stick
but the usb stick in any usb input in the radio
start the car and try to touch to display as shown in this link
https://yadi.sk/i/vxhq6BQM3WVrWk?spm...14913e5fbGNit4
the Firmwere from the seller ,,, do not you worry
if you faced any problem with the firmware try the other firmware here
https://yadi.sk/d/-cPZ-gERgc5EKw?spm...14913e5fbGNit4
if you still face the same problem i will send you a firmware but have another launcher
fast and nice
i use it now and everything is ok expect the car info because i have seat altea
eithar.metal said:
hi
i have the same problem
DO NOT connect the car radio to the battery
this is not a solution
the problem you have is the Firmware 100%
ask the seller for another firmware or try this
Download the Firmware from the link
https://yadi.sk/d/9hmrLUB8am6U7Q?spm...14913e5fbGNit4
download the file and copy the file to a usb stick
but the usb stick in any usb input in the radio
start the car and try to touch to display as shown in this link
https://yadi.sk/i/vxhq6BQM3WVrWk?spm...14913e5fbGNit4
the Firmwere from the seller ,,, do not you worry
if you faced any problem with the firmware try the other firmware here
https://yadi.sk/d/-cPZ-gERgc5EKw?spm...14913e5fbGNit4
if you still face the same problem i will send you a firmware but have another launcher
fast and nice
i use it now and everything is ok expect the car info because i have seat altea
Click to expand...
Click to collapse
Hello. My name is Cristi . Can you send me origilal firmware because I deleted the preloader, boot, and all of the partition? Now my head unit is bricked. [email protected]
sharkyslro40 said:
Hello. My name is Cristi . Can you send me origilal firmware because I deleted the preloader, boot, and all of the partition? Now my head unit is bricked. [email protected]
Click to expand...
Click to collapse
Hello, Please i want firmware to upload my car radio from 8.1 to 10
the reference in attached file.
Thank you
Hello all.
Can you help me?
I have a radio 2 din multimedia player Seicane Android 8.1 10.1 in and after a few minutes of working it appears black screen and for everything.
I could not enter the fastboot mode of android in this radio for a system reset, tried several button combinations and nothing. The radio has buttons turn off screen, volume (+ and -), return arrow, RST button on side of screen.
Already pressed reset waited a while and does not enter the screen fastboot. I reset the factory settings within android and the problem remains.
The radio model is H608 has 2 USB ports and android 8.1.
Could anyone help entering fastboot mode from android repair android 8.1?
View attachment 4912075
@rafaelreis said:
Hello all.
Can you help me?
I have a radio 2 din multimedia player Seicane Android 8.1 10.1 in and after a few minutes of working it appears black screen and for everything.
I could not enter the fastboot mode of android in this radio for a system reset, tried several button combinations and nothing. The radio has buttons turn off screen, volume (+ and -), return arrow, RST button on side of screen.
Already pressed reset waited a while and does not enter the screen fastboot. I reset the factory settings within android and the problem remains.
The radio model is H608 has 2 USB ports and android 8.1.
Could anyone help entering fastboot mode from android repair android 8.1?
View attachment 4912075
Click to expand...
Click to collapse
Completing the above information.
My android unit is Seicane 2din 10.1 "Android 8.1" Model sp9853l_1h10_vmm
Model: sp9853l_1h10_vmm
Android Version: 8.1.0
RAM: 1 GB
ROM: 16 GB
Build Number: K4001_NWD_S212701.20181213.15240009.N0026.01
Screen: 1024 * 600
Guys, I got the android update with the Chinese, everything is working normally. But I still can't get into the advanced fastboot recovery mode of Android, but I don't know the reset button (RST) combinations to display.
For those who need help have a Russian site https://4pda.ru/forum/index.php?act=search&source=all&forums[]=all&query=seicane&x=18&y=13 with all the information of this android unit.
Chinese update link: http://download.seicane.com/doc/80/....0.3d903e5fWaVqTw&file=H6android8.1update.zip
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
C75 said:
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1My4VMd5K270qSfEnHauErffJEOS5fSLZ/view?usp=drivesdk
Click to expand...
Click to collapse
@C75 This version is not compatible with my Android central, however thanks for the availability, who knows helps someone here.
@rafaelreis said:
@C75 This version is not compatible with my Android central, however thanks for the availability, who knows helps someone here.
Click to expand...
Click to collapse
I think there was some issue with the correct file being available. You can try this new link and see if this firmware is compatible with your unit.
C75 said:
I think there was some issue with the correct file being available. You can try this new link and see if this firmware is compatible with your unit.
Click to expand...
Click to collapse
@C75 I downloaded the file, I'll try again, but I'll try the new firmware in a few months, because I'm on a business trip, thanks for sharing.
Hi,
I am not sure what setting i have done or after updated system firmware. The easycon no longer working. Everytime i press the app icon, it went in and immediately kick out to the main icon screen.
Another issue is after updated the system firmware, the side touch panel lighting cannot be change colour. Floating button also gone missing.
Appreciate someone can help out.
I have t3_p1 1-16 Android 10 units. I reset it to factory settings. Screen mirror no longer works at all. Even the USB Car Play Dongle is not working. Is there a hero to offer a solution?
hello,
It happened to me when I updated my system, after system updating my air conditioner app stop working and also it's T3 P1 and I solved the problem.
The solution is to go to settings, car settings, extra settings ( pass 123456 ) then select car model or something related to model, then you will be getting into car selecting menu ( pic is attached for reference ).
Please be careful when choosing the car model, it should be exactly the same as yours.after that you will get an APK downloading, also MCU update, system will be restarted automatically after updation, done
notice: your head unit should be connected to WiFi for the MCU updating process.
Regards,,
Badr_ps said:
our head unit should be connected to WiFi for the MCU up
Click to expand...
Click to collapse
Badr_ps said:
hello,
It happened to me when I updated my system, after system updating my air conditioner app stop working and also it's T3 P1 and I solved the problem.
The solution is to go to settings, car settings, extra settings ( pass 123456 ) then select car model or something related to model, then you will be getting into car selecting menu ( pic is attached for reference ).
Please be careful when choosing the car model, it should be exactly the same as yours.after that you will get an APK downloading, also MCU update, system will be restarted automatically after updation, done
notice: your head unit should be connected to WiFi for the MCU updating process.
Regards,,
Click to expand...
Click to collapse
Thank you very much for the detailed explanation. I will try. I will share the result here.
famepa said:
Thank you very much for the detailed explanation. I will try. I will share the result here.
Click to expand...
Click to collapse
Hello again. I tried every option but it didn't work. Unable to connect via wifi mirror or cable. I think there is a hardware problem.
No encienden las luces de los botones laterales. No conecta el bluetooh.
Hi
I have a problem with quad core t3p1 android 9. It is stuck on the logo logo. Can anyone help me how to enter its recovery mode? Thanks
I also need help with how to enter recovery mode, anyone kindly assist.
Hello all,
My head unit failed to boot on the first start: I saw the Android splash screen for a few seconds, and then the device switched off.
Since I don't have access to the Android OS, I am unable to reinstall the OTA zip file from a USB stick. I don't have any backup files that I can use to flash the motherboard through its USB port.
I'm wondering if it's possible to revive the head unit in this case and, if so, how?
Many thanks in advance for your help.
PS. : ref. E9212B V0.1/A
Search results for query: 9212B
forum.xda-developers.com