I made a thread earlier regarding "Press any key to shut down" Fastboot error.
I have just bought a new laptop ,Acer Predator Helios 300. It has windows 10 1803 update.
I have no errors in device manager. It shows Asus ABD Interface and when in fastboot mode it shows ABD bootloader in Device manager. No errors.
When I enter the command fastboot devices.. it shows my device ID but as soon as I enter the command to flash twrp ,the fastboot mode on my phone closes and shows the message "Press any key to shut down" and basically the flashing doesn't start.
I figured out the error was due to the USB 3.0 port by digging through forums so I tried the USB 2.0 ports and sometimes I get the same error and other times I'm getting another error called remote error file larger than allowed size something something and the flashing fails.
I'm also unable to flash stock fastboot rom. I'm breaking my head over this the whole day. Frustrated I made this post. My old laptop has no issues but I don't know what is happening with my new one. All the correct drivers are loaded. Currently I'm using Pixel experience.
Hello bro . I have the same issue . I also own Acer predator I'm not able to flash anything after flashing 327 twrp build . Getting the same error as you are . Please do tell me if you find a solution
I think you might have this issue then run "fastboot devices" twice:
1st time:
Code:
c:\android-sdk\platform-tools>fastboot devices
J5AXB762E6689LF fastboot
2nd time:
Code:
c:\android-sdk\platform-tools>fastboot devices
???????????? fastboot
and the Android device shows Press any key to shut down
I found a workaround solution. Use a multi port USB hub regardless is USB 2.0 or 3.0, connect Android devices to USB hub and USB hub to PC. The problem shall solve regardless of how many times you run "fastboot devices"
Deeptesh Basak said:
I made a thread earlier regarding "Press any key to shut down" Fastboot error.
I have just bought a new laptop ,Acer Predator Helios 300. It has windows 10 1803 update.
I have no errors in device manager. It shows Asus ABD Interface and when in fastboot mode it shows ABD bootloader in Device manager. No errors.
When I enter the command fastboot devices.. it shows my device ID but as soon as I enter the command to flash twrp ,the fastboot mode on my phone closes and shows the message "Press any key to shut down" and basically the flashing doesn't start.
I figured out the error was due to the USB 3.0 port by digging through forums so I tried the USB 2.0 ports and sometimes I get the same error and other times I'm getting another error called remote error file larger than allowed size something something and the flashing fails.
I'm also unable to flash stock fastboot rom. I'm breaking my head over this the whole day. Frustrated I made this post. My old laptop has no issues but I don't know what is happening with my new one. All the correct drivers are loaded. Currently I'm using Pixel experience.
Click to expand...
Click to collapse
Try in other system which runs windows 7
Windows 10 sucks.same happen to me.
Me with Same problem ?
Try changing cables or ports. That worked for me
Deeptesh Basak said:
I made a thread earlier regarding "Press any key to shut down" Fastboot error.
I have just bought a new laptop ,Acer Predator Helios 300. It has windows 10 1803 update.
I have no errors in device manager. It shows Asus ABD Interface and when in fastboot mode it shows ABD bootloader in Device manager. No errors.
When I enter the command fastboot devices.. it shows my device ID but as soon as I enter the command to flash twrp ,the fastboot mode on my phone closes and shows the message "Press any key to shut down" and basically the flashing doesn't start.
I figured out the error was due to the USB 3.0 port by digging through forums so I tried the USB 2.0 ports and sometimes I get the same error and other times I'm getting another error called remote error file larger than allowed size something something and the flashing fails.
I'm also unable to flash stock fastboot rom. I'm breaking my head over this the whole day. Frustrated I made this post. My old laptop has no issues but I don't know what is happening with my new one. All the correct drivers are loaded. Currently I'm using Pixel experience.
Click to expand...
Click to collapse
I've the same problem..N i'm also trying to get solutions..but there's nothing.. Using Acer Nitro 5..
If you have an AMD chipset, forget about doing anything fastboot related because it just doesn't work. Even changing OS won't help. Otherwise, try using the original cable.
swarup16 said:
I've the same problem..N i'm also trying to get solutions..but there's nothing.. Using Acer Nitro 5..
Click to expand...
Click to collapse
same here...any solution?
farhanshaikh671 said:
If you have an AMD chipset, forget about doing anything fastboot related because it just doesn't work. Even changing OS won't help. Otherwise, try using the original cable.
Click to expand...
Click to collapse
I'm having two laptops and both of them have amd chipset..... I'm not facing any problem......and windows 10 doesn't suck...
The main problem is with the ports I tried with my Zephyrus M but it was not working.....but as I switch to my old laptop it worked at once......
I think the problem with usb 3.0 ( I think so)....
So I would recommend using a usb hub....it should work fine with any port......and will be Compatible with Amd and Intel.
MillerRoy7kundu said:
I'm having two laptops and both of them have amd chipset..... I'm not facing any problem......and windows 10 doesn't suck...
The main problem is with the ports I tried with my Zephyrus M but it was not working.....but as I switch to my old laptop it worked at once......
I think the problem with usb 3.0 ( I think so)....
So I would recommend using a usb hub....it should work fine with any port......and will be Compatible with Amd and Intel.
Click to expand...
Click to collapse
Sadly, didn't work for me even after trying everything; neither for many others here on xda. Probably an amd chipset specific problem.
Deeptesh Basak said:
I made a thread earlier regarding "Press any key to shut down" Fastboot error.
I have just bought a new laptop ,Acer Predator Helios 300. It has windows 10 1803 update.
I have no errors in device manager. It shows Asus ABD Interface and when in fastboot mode it shows ABD bootloader in Device manager. No errors.
When I enter the command fastboot devices.. it shows my device ID but as soon as I enter the command to flash twrp ,the fastboot mode on my phone closes and shows the message "Press any key to shut down" and basically the flashing doesn't start.
I figured out the error was due to the USB 3.0 port by digging through forums so I tried the USB 2.0 ports and sometimes I get the same error and other times I'm getting another error called remote error file larger than allowed size something something and the flashing fails.
I'm also unable to flash stock fastboot rom. I'm breaking my head over this the whole day. Frustrated I made this post. My old laptop has no issues but I don't know what is happening with my new one. All the correct drivers are loaded. Currently I'm using Pixel experience.
Click to expand...
Click to collapse
Same problem using acer nitro 5, windows 10 latest build with all cumulative updates
farhanshaikh671 said:
If you have an AMD chipset, forget about doing anything fastboot related because it just doesn't work. Even changing OS won't help. Otherwise, try using the original cable.
Click to expand...
Click to collapse
I have AMD CPU in both of my laptop and desktop but the device just connects in Desktop (as it has USB 2.0) but not in Laptop. I tried different cables and USB Hub also. But no success.
---------- Post added at 11:22 AM ---------- Previous post was at 11:20 AM ----------
MillerRoy7kundu said:
I'm having two laptops and both of them have amd chipset..... I'm not facing any problem......and windows 10 doesn't suck...
The main problem is with the ports I tried with my Zephyrus M but it was not working.....but as I switch to my old laptop it worked at once......
I think the problem with usb 3.0 ( I think so)....
So I would recommend using a usb hub....it should work fine with any port......and will be Compatible with Amd and Intel.
Click to expand...
Click to collapse
Yes. I also think the issue is USB 3.0 irrespective of AMD or Intel!
Invincible-Venom said:
I have AMD CPU in both of my laptop and desktop but the device just connects in Desktop (as it has USB 2.0) but not in Laptop. I tried different cables and USB Hub also. But no success.
---------- Post added at 11:22 AM ---------- Previous post was at 11:20 AM ----------
Yes. I also think the issue is USB 3.0 irrespective of AMD or Intel!
Click to expand...
Click to collapse
I have Intel CPU running Win 10 Pro which has 2 USB 3.0 ports - standard & charging. Commands work fine on either of those ports. But I maybe lucky since only USB 2.0 works for some.
Tianhe said:
I have Intel CPU running Win 10 Pro which has 2 USB 3.0 ports - standard & charging. Commands work fine on either of those ports. But I maybe lucky since only USB 2.0 works for some.
Click to expand...
Click to collapse
If USB 3.0 and Win 10 are also not the issue, then what is the main issue? For me it doesn't work in USB 3.0 slots. U have tried with USB Hub and different cables also, still no success!
Invincible-Venom said:
If USB 3.0 and Win 10 are also not the issue, then what is the main issue? For me it doesn't work in USB 3.0 slots. U have tried with USB Hub and different cables also, still no success!
Click to expand...
Click to collapse
If I knew exactly then this thread would have been solved ! I have already said that I may be lucky with USB 3.0 but the error could be due to various factors or a combination of those e.g. latest platform tool, specific drivers for specific hardware, not using elevated command prompt in requisite folder or using powershell, using minimal ADB or conflicting resources etc. And it may also be something entirely different so no one single solution.
Tianhe said:
If I knew exactly then this thread would have been solved ! I have already said that I may be lucky with USB 3.0 but the error could be due to various factors or a combination of those e.g. latest platform tool, specific drivers for specific hardware, not using elevated command prompt in requisite folder or using powershell, using minimal ADB or conflicting resources etc. And it may also be something entirely different so no one single solution.
Click to expand...
Click to collapse
I know why my issues persists, it's due to hardware. 2nd Gen Ryzen CPUs have fastboot driver issues.
Invincible-Venom said:
I know why my issues persists, it's due to hardware. 2nd Gen Ryzen CPUs have fastboot driver issues.
Click to expand...
Click to collapse
Good to know, i also have an old AMD setup with no fastboot issues. However, it runs on Athlon.
Tianhe said:
Good to know, i also have an old AMD setup with no fastboot issues. However, it runs on Athlon.
Click to expand...
Click to collapse
It's a coincidence. I too have same CPU an AMD Athlon II
Related
- How My Phone Got Bricked?: (Chinese Version Oneplus 2) I Was On Oxygen OS 3.0 And TWRP 3.0 And I Decided To Flash The Resurrection Remix ROM, I Did A Full Wipe And I Installed The Rom And It Failed To Installed The ROM. Now My Phone Is In A Bootloop With No OS Installed. I Have The Chinese Version OP2
- Current State Of My Device: My Device Is In A Bootloop With No OS Installed, I Did Notice That My Phone Was Not Being Recognized VIA Fastboot & ADB On My PC. I Went Fastboot Mode And My Phone Is Not Being Recognized By PC, And I Went To TWRP, ADB Was Not Working And ADB Sideload Is Not Working. I Also Tried A USB OTG With A USB Drive And Still TWRP Recovery Is Not Recognizing It. How Ever When I Connect My Device To PC And Check Device Manager And Press Scan For Hard Ware Changes My Device Shows Up As "COM 1". I Also Did Try To Put My Phone Into Qualcomm Mode Trying Alot Of Key Combinations But My Phone Is Not Getting Into Qualcomm Mode Or It Just Might Be Me Since I Heard Its Tricky For The Phone To Get Into Qualcomm Mode. I Did Try One Click ADB And Fastboot Installed And Qualcomm USB Driver, Still No Luck. And I Did Try The MEGA Unbrick Guide. I Have Tried This With 3 Other Computers Which Are All Running Windows 10 And Turned Driver Signature Enforcement Off And Still No Luck, And Also A PC Running Linux Mint And Still No Luck. Please Help Me And I Will Put All Thanks On All Of Your Replies And I Really Appreciate Your Help!
- Whats Working:
- My Device Charges From The PC And Wall
- I Am Using The Official OP2 Cable
- Can Access Recovery + Fastboot
- Turns On But In A Bootloop
I think it's a bad cable... if you can get into fastboot and the PC with Windows 10 and Linux both don't see it.. cable
Not sure whats needed on windows, since I never use it....but after a fresh install of Ubuntu 16.04 a few days ago, I did have to install a few adb and fastboot packages before my devices were recognized. Do you know if the adb/fastboot packages and they're dependencies are installed on the Linux mint computer?
If yes, power off phone and plug into computer. Then start phone in fastboot mode. Open a terminal on the PC and run "adb devices" (without quotes of course) .....any output on screen?
foomanjackel said:
Not sure whats needed on windows, since I never use it....but after a fresh install of Ubuntu 16.04 a few days ago, I did have to install a few adb and fastboot packages before my devices were recognized. Do you know if the adb/fastboot packages and they're dependencies are installed on the Linux mint computer?
If yes, power off phone and plug into computer. Then start phone in fastboot mode. Open a terminal on the PC and run "adb devices" (without quotes of course) .....any output on screen?
Click to expand...
Click to collapse
Yeah I did try typing ADB devices and Fastboot devices in both twrp and fastboot. I think the issue might be the cable
evertking said:
I think it's a bad cable... if you can get into fastboot and the PC with Windows 10 and Linux both don't see it.. cable
Click to expand...
Click to collapse
Yeah I think the cable is probably the problem. Although my phone chargers with the cable. I will look into buying a new cable soon but its a little expensive. I will try to buy it next week
fahad999 said:
Yeah I think the cable is probably the problem. Although my phone chargers with the cable. I will look into buying a new cable soon but its a little expensive. I will try to buy it next week
Click to expand...
Click to collapse
I'm sure you been reading and seen people with the same cable as ours with the same problem.. works with charging but not adb or fastboot. But you can try to issue a command with it.. fastboot devices does sometimes come back empty.. just try to do OEM unlock for example.
evertking said:
I'm sure you been reading and seen people with the same cable as ours with the same problem.. works with charging but not adb or fastboot. But you can try to issue a command with it.. fastboot devices does sometimes come back empty.. just try to do OEM unlock for example.
Click to expand...
Click to collapse
My cable did used to work with adb and fastboot before, and I did unlock the bootloader with it before. I think now the cable got broken
Same issue working cable
Same issue... but my cable is working fine. I have a 2nd OP2 and tried the qualcomm connect with my cable and volume up, and worked perfect. More over, I swapped motherboards and still didnt work. I have access to twrp on the phone and I can get into fastboot. But no way to connect to my pc
Asus ZMPM1 3/32 model. I was on Havoc Pie official with TWRP 3.2.3. I flashed 327 stock rom using TWRP, now I've lost the TWRP. So when I go to flash TWRP using ADB ,I type the command and the process pauses and the phone shows the message "Press any key to shut down". Please help.
i had the same issue not sure why but it did not work when i connected it to a usb 3.0 port but worked with a usb 2.0 port try that
same problem
Deeptesh Basak said:
Asus ZMPM1 3/32 model. I was on Havoc Pie official with TWRP 3.2.3. I flashed 327 stock rom using TWRP, now I've lost the TWRP. So when I go to flash TWRP using ADB ,I type the command and the process pauses and the phone shows the message "Press any key to shut down". Please help.
Click to expand...
Click to collapse
facing the excat issue. Note: Tried all USB ports in my laptop.
Solved
Deeptesh Basak said:
Asus ZMPM1 3/32 model. I was on Havoc Pie official with TWRP 3.2.3. I flashed 327 stock rom using TWRP, now I've lost the TWRP. So when I go to flash TWRP using ADB ,I type the command and the process pauses and the phone shows the message "Press any key to shut down". Please help.
Click to expand...
Click to collapse
faced the issue untill I realized it was an issue regarding USB 3.0. The phone cannot support such a higher data speed. Use a USB 2.0 hub between your PC and your phone. That solved my problem.
For some reason connecting the phone to a usb 2.0 port in my laptop also did not solve the problem.
Btw, issue came up for me after recent update to pie
Try usb hub
Deeptesh Basak said:
Asus ZMPM1 3/32 model. I was on Havoc Pie official with TWRP 3.2.3. I flashed 327 stock rom using TWRP, now I've lost the TWRP. So when I go to flash TWRP using ADB ,I type the command and the process pauses and the phone shows the message "Press any key to shut down". Please help.
Click to expand...
Click to collapse
UP iam facing that too
I am facing this too , After recent pie update my Camera2api got disabled when trying to enable it I got this issue and still i couldn't enable it
tried another pc and it says okay but still it is in legacy
I have been trying to flash twrp since January. Still no luck. Can anyone help? I have been following the exact steps mentioned in the respective threads for every twrp version i tried. USB 2.0, changing data cables, unlocking using officia unlock tool because unofficially unlock process didn't worked when i tried. It got stuck. All it shows is "press any key to shutdown ".
This is my 3rd android phone which I'm using right now. Always used custom roms. And now its frustrating that I'm stuck at the starting line of it all... Please help me
starlord143 said:
I have been trying to flash twrp since January. Still no luck. Can anyone help? I have been following the exact steps mentioned in the respective threads for every twrp version i tried. USB 2.0, changing data cables, unlocking using officia unlock tool because unofficially unlock process didn't worked when i tried. It got stuck. All it shows is "press any key to shutdown ".
This is my 3rd android phone which I'm using right now. Always used custom roms. And now its frustrating that I'm stuck at the starting line of it all... Please help me
Click to expand...
Click to collapse
You have already tried USB HUB? I switched to USB 2.0 port, but don't work. For me, the USB HUB connection, a particular USB 1.1, works.
renda-l said:
You have already tried USB HUB? I switched to USB 2.0 port, but don't work. For me, the USB HUB connection, a particular USB 1.1, works.
Click to expand...
Click to collapse
I Don't have a usb hub and my patience is also running out. Thanks though
Worked well
Broh. For last two days i also facing the same issue. Today I made it.
Without closing 'command' box in pc, and removing usb,,... keep restart to fastboot mode.
Or
Restart pc without unplugging usb(mobile should be on fast boot mode) direct open flashall_aft.bat/ flashall_bat.cmd....
It it bcoz...fastboot commands are not supported on AMD processors..
U have to use usb 2.0 external hubs as it wont work on built-in usb 2.0 ports also...
Or switch to some intel machine
Restart in FB mode.
Connect phone to pc with 2.0 port.
Type this cmd:
fastboot boot twrp.img
(The file should be in ADB folder itself. Here twrp.img can be replaced with the file name which u have but should be a recovery of your phone only)
This cmd will temporarily boot your device in Twrp; if not try to hard pess those keys to boot to recovery.
From Twrp flash again Twrp.img to flash Twrp permanently. Now again reboot to recovery to test it.
I hope this will help
Asus Zenfone Max pro m2
Guys,
I have a problem that my phone (Asus zenfone max pro m2)was bootloader unlocked but was running Asus Official ROM, recently phone got turned off itself while using and not starting past boot.
When i try to flash on fast boot mode i dont see any devices connected, can someone suggest me further? it ll be really helpful to get my phone back
C:\adb>adb devices
List of devices attached
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\adb>adb devices
List of devices attached
C:\adb>
==============================
Trying fastboot - press any key to shutdown
usb hub worked for me too
@nabinshajm I also tried using both the USB but didn't work. Do you got the solution ?
I just bought my gf this phone and was planning to install a rom, but im facing a little problem, Im on a win 10 computer the phone was recognized immediately, adb comanda work well. When I try to use the xiami unlock it doesn't work. I tries with different cables and ports. Seems like the fastboot loses connection or something like that.
When I enter fastboot and type fastboot devices it show the device, if I do it again it show ????? device and if I do it again it doesn't show at all.
Some times when I do the first fastboot devices it jump to the last part and only give me the option to shutdown with any key....
Can anyone help me with this?
onlykhaz said:
I just bought my gf this phone and was planning to install a rom, but im facing a little problem, Im on a win 10 computer the phone was recognized immediately, adb comanda work well. When I try to use the xiami unlock it doesn't work. I tries with different cables and ports. Seems like the fastboot loses connection or something like that.
When I enter fastboot and type fastboot devices it show the device, if I do it again it show ????? device and if I do it again it doesn't show at all.
Some times when I do the first fastboot devices it jump to the last part and only give me the option to shutdown with any key....
Can anyone help me with this?
Click to expand...
Click to collapse
Have you tried with original cable?
Is your windows x32 or x64?
xcrpt said:
Have you tried with original cable?
Is your windows x32 or x64?
Click to expand...
Click to collapse
Yes, with the original cable and other cables. its win 10 x64.
Seems like the fastboot end too quick, when I send a command inmmediatle says in the top left corner press any bottom to shutdown I think.
Solution
Just try it on another computer mate
el.tsupaka said:
Just try it on another computer mate
Click to expand...
Click to collapse
Ok m8 thanks, I tried before with another computer but, the driver didn't work. I will try with another :good::good:
If anyone has another suggestion?
After, trying with another computer, and unistalling the drivers and installing them by hand it worked. I have to wait now 7 days to unlock the bootlader thanks!
onlykhaz said:
I just bought my gf this phone and was planning to install a rom, but im facing a little problem, Im on a win 10 computer the phone was recognized immediately, adb comanda work well. When I try to use the xiami unlock it doesn't work. I tries with different cables and ports. Seems like the fastboot loses connection or something like that.
When I enter fastboot and type fastboot devices it show the device, if I do it again it show ????? device and if I do it again it doesn't show at all.
Some times when I do the first fastboot devices it jump to the last part and only give me the option to shutdown with any key....
Can anyone help me with this?
Click to expand...
Click to collapse
I'm facing the same problem as you. Did your phone come with unlocked bootloader?
Edit: Changing computer solved my problem too
When i'm checking through cmd its showing my device is connected as the 1st pic. N then when i'm going flash stock rom then its automatically removing device and showing failed n on the device its Showing press any key to boot .
I've already checked all the possible solution and its never taking any files,always getting failed..From the very morning of 8th april i'm tring..Please help me from this stuck... Thanks
Upload pics
I have faced the same issues. It's probably due to USB Drivers and if you connect the device in USB 3.0 Port fastboot drivers don't work.
Invincible-Venom said:
I have faced the same issues. It's probably due to USB Drivers and if you connect the device in USB 3.0 Port fastboot drivers don't work.
Click to expand...
Click to collapse
I dont think so..its not taking from any of the ports...
swarup16 said:
I dont think so..its not taking from any of the ports...
Click to expand...
Click to collapse
Then what's the issue? I tried with old laptop and desktop with 2.0 port it works flawlessly. I used latest platform tools also no issue there!
Tried miui 12 and after flashing rom the twrp is gone I tried to reflash it the same way I did first but sadly when I'm on fastboot PC can't detect it. also tried it with other softwares but same result. Device is fine and responds when open but not in fastboot mode. Currently running miui 11 .0.6 China stable. Stucked. Also all drivers are updated
Same here.
I accidentally flashed china stable 11.0.4 zip rom on my global device through twrp and upon booting up twrp was gone and when i plug in usb the pc doesn't detect anything. In order to make pc detect the phone via usb cable i have to reboot phone while plugging usb to laptop that way file transfer option shows up in laptop and adb works but fastboot doesn't work i can force boot to fastboot through adb but upon booting to fastboot the pc stucks at waiting for device. All the drivers are installed
Currently on china stable 11.0.6
Same issue indeed
That's exactly what's happening right now. I hope someone can help us
Quote me if u find any luck.
Same issues
That happens me sometimes. I only reboot the device into fastboot again, reboot the computer, and that it. This may change depending on your computer CPU, mine is AMD. And ussually I have to use a 2.0 USB or if it still does not work a USB 2.0 hub. I know the hub thing is strange but it worked for me when my pc does not detect the phone in fastboot. Hope it helps .
With my PC I have to open device manager, look for the device, usually has a yellow sign next to it. Right click on the device name, click update driver, click browse my computer for driver software, click let me pick from a list of available drivers on my computer and pick mtp USB device. Then I read it. I hope this helps.
daniml3 said:
That happens me sometimes. I only reboot the device into fastboot again, reboot the computer, and that it. This may change depending on your computer CPU, mine is AMD. And ussually I have to use a 2.0 USB or if it still does not work a USB 2.0 hub. I know the hub thing is strange but it worked for me when my pc does not detect the phone in fastboot. Hope it helps .
Click to expand...
Click to collapse
What hub?
Tried with multiple pcs with no success
epicblue8 said:
What hub?
Tried with multiple pcs with no success
Click to expand...
Click to collapse
I use a usb hub that is very old i guess, as it uses MiniUSB. By the way with multiple computer it should work, your error is very strange, I never saw it. A thing that may work is trying to use fastboot on a Linux system (no, with VMs no). So if you can flash a pen drive with a Ubuntu ISO or any linux distro, boot linux,install fastboot and check if it detects your phone.
daniml3 said:
I use a usb hub that is very old i guess, as it uses MiniUSB. By the way with multiple computer it should work, your error is very strange, I never saw it. A thing that may work is trying to use fastboot on a Linux system (no, with VMs no). So if you can flash a pen drive with a Ubuntu ISO or any linux distro, boot linux,install fastboot and check if it detects your phone.
Click to expand...
Click to collapse
Read my 1st reply to this op
Even file transfer option doesn't show up if i connect my phone via usb to laptop.
In order to make pc show file transfer option i have to reboot phone while connecting the phone to pc so.
That way i can use adb but as soon as i boot to fastboot via cmd pc doesn't detect the fastboot mode.
Tried with 3 laptops
Issue Fixed
epicblue8 said:
Same here.
I accidentally flashed china stable 11.0.4 zip rom on my global device through twrp and upon booting up twrp was gone and when i plug in usb the pc doesn't detect anything. In order to make pc detect the phone via usb cable i have to reboot phone while plugging usb to laptop that way file transfer option shows up in laptop and adb works but fastboot doesn't work i can force boot to fastboot through adb but upon booting to fastboot the pc stucks at waiting for device. All the drivers are installed
Currently on china stable 11.0.6
Click to expand...
Click to collapse
Dude I fixed it and I managed to flash global and maybe reflash EU when miui 12 stable arrive
Try another type c cord preferable the original one. I just change the cord and everything went fine fastboot can now be detected via "fastboot devices".
Chipotle crackers said:
Dude I fixed it and I managed to flash global and maybe reflash EU when miui 12 stable arrive
Try another type c cord preferable the original one. I just change the cord and everything went fine fastboot can now be detected via "fastboot devices".
Click to expand...
Click to collapse
Not with original but tried 3 type c cables and 3 pcs
epicblue8 said:
Quote me if u find any luck.
Click to expand...
Click to collapse
hey have find any solutions? we have the same problem