- How My Phone Got Bricked?: (Chinese Version Oneplus 2) I Was On Oxygen OS 3.0 And TWRP 3.0 And I Decided To Flash The Resurrection Remix ROM, I Did A Full Wipe And I Installed The Rom And It Failed To Installed The ROM. Now My Phone Is In A Bootloop With No OS Installed. I Have The Chinese Version OP2
- Current State Of My Device: My Device Is In A Bootloop With No OS Installed, I Did Notice That My Phone Was Not Being Recognized VIA Fastboot & ADB On My PC. I Went Fastboot Mode And My Phone Is Not Being Recognized By PC, And I Went To TWRP, ADB Was Not Working And ADB Sideload Is Not Working. I Also Tried A USB OTG With A USB Drive And Still TWRP Recovery Is Not Recognizing It. How Ever When I Connect My Device To PC And Check Device Manager And Press Scan For Hard Ware Changes My Device Shows Up As "COM 1". I Also Did Try To Put My Phone Into Qualcomm Mode Trying Alot Of Key Combinations But My Phone Is Not Getting Into Qualcomm Mode Or It Just Might Be Me Since I Heard Its Tricky For The Phone To Get Into Qualcomm Mode. I Did Try One Click ADB And Fastboot Installed And Qualcomm USB Driver, Still No Luck. And I Did Try The MEGA Unbrick Guide. I Have Tried This With 3 Other Computers Which Are All Running Windows 10 And Turned Driver Signature Enforcement Off And Still No Luck, And Also A PC Running Linux Mint And Still No Luck. Please Help Me And I Will Put All Thanks On All Of Your Replies And I Really Appreciate Your Help!
- Whats Working:
- My Device Charges From The PC And Wall
- I Am Using The Official OP2 Cable
- Can Access Recovery + Fastboot
- Turns On But In A Bootloop
I think it's a bad cable... if you can get into fastboot and the PC with Windows 10 and Linux both don't see it.. cable
Not sure whats needed on windows, since I never use it....but after a fresh install of Ubuntu 16.04 a few days ago, I did have to install a few adb and fastboot packages before my devices were recognized. Do you know if the adb/fastboot packages and they're dependencies are installed on the Linux mint computer?
If yes, power off phone and plug into computer. Then start phone in fastboot mode. Open a terminal on the PC and run "adb devices" (without quotes of course) .....any output on screen?
foomanjackel said:
Not sure whats needed on windows, since I never use it....but after a fresh install of Ubuntu 16.04 a few days ago, I did have to install a few adb and fastboot packages before my devices were recognized. Do you know if the adb/fastboot packages and they're dependencies are installed on the Linux mint computer?
If yes, power off phone and plug into computer. Then start phone in fastboot mode. Open a terminal on the PC and run "adb devices" (without quotes of course) .....any output on screen?
Click to expand...
Click to collapse
Yeah I did try typing ADB devices and Fastboot devices in both twrp and fastboot. I think the issue might be the cable
evertking said:
I think it's a bad cable... if you can get into fastboot and the PC with Windows 10 and Linux both don't see it.. cable
Click to expand...
Click to collapse
Yeah I think the cable is probably the problem. Although my phone chargers with the cable. I will look into buying a new cable soon but its a little expensive. I will try to buy it next week
fahad999 said:
Yeah I think the cable is probably the problem. Although my phone chargers with the cable. I will look into buying a new cable soon but its a little expensive. I will try to buy it next week
Click to expand...
Click to collapse
I'm sure you been reading and seen people with the same cable as ours with the same problem.. works with charging but not adb or fastboot. But you can try to issue a command with it.. fastboot devices does sometimes come back empty.. just try to do OEM unlock for example.
evertking said:
I'm sure you been reading and seen people with the same cable as ours with the same problem.. works with charging but not adb or fastboot. But you can try to issue a command with it.. fastboot devices does sometimes come back empty.. just try to do OEM unlock for example.
Click to expand...
Click to collapse
My cable did used to work with adb and fastboot before, and I did unlock the bootloader with it before. I think now the cable got broken
Same issue working cable
Same issue... but my cable is working fine. I have a 2nd OP2 and tried the qualcomm connect with my cable and volume up, and worked perfect. More over, I swapped motherboards and still didnt work. I have access to twrp on the phone and I can get into fastboot. But no way to connect to my pc
Related
I did OTA update to 4.3 of my N7 3G which was rooted and unlocked (I know now I shouldn't have done it...).
I got an error at the end of the update (when was installing radio).
Rebooted, and got stuck in the google loop...
NOW, I CAN ENTER FASTBOOT MODE, BUT THE PROBLEM IS THAT THE USB DEVICE IS NO MORE DETECTED BY THE PC (I tried Windows XP, Windows 7, Linux), so I cannot re-flash it... It's not a driver's issue, because at USB level the N7 is not even detected when connected to the PC (for instance, dmesg shows nothing in ubuntu and windows does not "beep").
Is it possible that that was corrupted only the "USB stack" of the bootloader??? I could not find a similar issue in this or other forums (??).
Is there any chance to get the USB working again?
Is there any chance to send it for repair to ASUS (I bought it one month ago) with this described symptoms and with the "unlocked" icon on power on?
Is there a payed service to flash it with JTAG?
Thanks to anyone who can give me a clue...
Same problem - updated to 4.3 OTA today, N7 not recognized as an USB device at all. Still haven't tried on a Mac but I doubt it will be any different. The device isn't detected in normal mode or fastboot
c0ldblooded said:
Same problem - updated to 4.3 OTA today, N7 not recognized as an USB device at all. Still haven't tried on a Mac but I doubt it will be any different. The device isn't detected in normal mode or fastboot
Click to expand...
Click to collapse
I solved by sending it to assistance. Excellent service by ASUS... I did not have to pay although the tablet was unlocked/rooted.
Andrea.
since the new update to 4.3, N7 requires authorization with your pc before you can use ADB. I had this issue and had to go into developer options and click on the 'Revoke USB debugging authorization'. when I connect it to the pc again and ran adb, my N7 then asked for authorization to allow pc access. That restore my ADB.
Also make sure you have the lastest SDK installed on your pc too.
If you can enter Fastboot via pc you certainly can reflash it.
dilldoe said:
since the new update to 4.3, N7 requires authorization with your pc before you can use ADB. I had this issue and had to go into developer options and click on the 'Revoke USB debugging authorization'. when I connect it to the pc again and ran adb, my N7 then asked for authorization to allow pc access. That restore my ADB.
Also make sure you have the lastest SDK installed on your pc too.
If you can enter Fastboot via pc you certainly can reflash it.
Click to expand...
Click to collapse
In my case (and probably the same for Colblooded) I got stuck with the N7 NOT BOOTING and NOT DETECTED by any USB host (tried also with dmesg on linux), so there was no chance to re-flash it. The only thing I could do was to send it to Brno for repair...
Andrea
andreabix said:
In my case (and probably the same for Colblooded) I got stuck with the N7 NOT BOOTING and NOT DETECTED by any USB host (tried also with dmesg on linux), so there was no chance to re-flash it. The only thing I could do was to send it to Brno for repair...
Andrea
Click to expand...
Click to collapse
Exactly the case. Unfortunately I can't send it to ASUS
andreabix said:
In my case (and probably the same for Colblooded) I got stuck with the N7 NOT BOOTING and NOT DETECTED by any USB host (tried also with dmesg on linux), so there was no chance to re-flash it. The only thing I could do was to send it to Brno for repair...
Andrea
Click to expand...
Click to collapse
you said you could boot into fastboot, did 'fastboot devices' on your pc not detect it? Does it detect it now?
dilldoe said:
you said you could boot into fastboot, did 'fastboot devices' on your pc not detect it? Does it detect it now?
Click to expand...
Click to collapse
That's the point: I could boot into fastboot but 'fastboot device' was not detected by the PC (so I could not re-flash it). Now if I boot into fastboot the PC correctly detects the device...
What I find very, very strange is that an OTA update to 4.3 caused the USB port to stop working!! From what I read googling around, even with a problem during a system update going to fastboot mode (on + volume down) should always allow a connection to the PC for reflashing, or, at least, you could enter APX mode (on + volume up), which is an even lower level mode that is detected by the PC with different drivers (for direct programming, but need encryption key and SW not yet available for Nexus 7).
Maybe it was just a coincidence: an USB hardware failure just before I did the OTA update, which I realized only afterwards, when I needed USB for reflashing...
However the ASUS Service Repair Report states:
Problem/Symptoms: Pad Battery can't be charged. OS ERROR
Replaced Part:
ME370TG BAT COSLI-POLY FPAC
ME370TG MAIN_BD.1G/T30L/NFC
The first one looks the battery (????)
The second sounds like the mainboard...
Andrea
Hello.
I recently installed the 4.3 ota update. I knew I would have to reroot. After the update I have tried everything I can think of to flash a new recovery or bootloader or anything. All without success. Fastboot simply says "Sending...", the phone says "downloading..." and that's the end of it. They would both sit in that state forever if I let them.
I know I'm not alone on this issue. I have searched and searched without finding a solution. Does anyone know of one?
Thanks.
pfederighi said:
Hello.
I recently installed the 4.3 ota update. I knew I would have to reroot. After the update I have tried everything I can think of to flash a new recovery or bootloader or anything. All without success. Fastboot simply says "Sending...", the phone says "downloading..." and that's the end of it. They would both sit in that state forever if I let them.
I know I'm not alone on this issue. I have searched and searched without finding a solution. Does anyone know of one?
Thanks.
Click to expand...
Click to collapse
1. Usb debugging enabled and bootloader unlocked?
2. Correct drivers installed, try these usb naked drivers for instance https://www.google.nl/url?sa=t&rct=...=RUlfH35SAJki_DdLfo8MeA&bvm=bv.51773540,d.Yms.
3. Used the original usb cable or tried another usb port?
4. If you type fastboot devices in fastboot mode do you see a serialnumber? The same for adb devices in adb mode?
gee2012 said:
1. Usb debugging enabled and bootloader unlocked?
2. Correct drivers installed, try these usb naked drivers for instance https://www.google.nl/url?sa=t&rct=...=RUlfH35SAJki_DdLfo8MeA&bvm=bv.51773540,d.Yms.
3. Used the original usb cable or tried another usb port?
4. If you type fastboot devices in fastboot mode do you see a serialnumber? The same for adb devices in adb mode?
Click to expand...
Click to collapse
USB debugging is enabled.
I've tried the original USB cable and others. I've tried different USB ports.
adb works fine. Fastboot recognizes my phone and prints a serial number. Fastboot even works for locking/unlocking the boot loader.
There are no "drivers" in the Linux world. Should I find someone who has a Windows system and ask to use their computer?
Thanks.
pfederighi said:
USB debugging is enabled.
I've tried the original USB cable and others. I've tried different USB ports.
adb works fine. Fastboot recognizes my phone and prints a serial number. Fastboot even works for locking/unlocking the boot loader.
There are no "drivers" in the Linux world. Should I find someone who has a Windows system and ask to use their computer?
Thanks.
Click to expand...
Click to collapse
Yes, you may try that. I`am talking about a windows pc and never had an issue. I don`t have xperience with linux computers.Good luck bro
Solved
gee2012 said:
Yes, you may try that. I`am talking about a windows pc and never had an issue. I don`t have xperience with linux computers.Good luck bro
Click to expand...
Click to collapse
So. I solved the problem. I now feel like an idiot.
I plugged my phone into a Windows system and a nice notice popped up saying that my device could run faster if it was plugged into a USB 2.0 port. Then it dawned on me that only a few of the ports on my computer are 2.0 and that I had tried one of them previously but with an extension cable (because it's in the back and hard to reach). I unplugged the extension cable and plugged the USB cable directly into the port and all was well.
I hope that others who have had this issue find this useful.
Thank you for your help.
**UPDATE I have unbricked my phone and the whole time I thought it was a software issue on my phone but it was a cable, I guess my cable got broken when I bricked my phone and I thought it was a software issue but it was not the whole time**
I have a bricked device and I would appreciate your help and I have tried EVERYTHING!!
here is how my oneplus 2 got bricked, I was on stock oxygen os 3.0 and rooted and I had twrp recovery 3.0.
So I did a full wipe on my device and when I was flashing the resurrection remix rom in twrp it said "Error 7" so then I reboot my phone and I was in a bootloop with no os.
I went back to twrp and flash the rom again and it not work. So then I tryed to transfer a file through my computer to my device and twrp was not recognizing it and tryed adb sideload and same thing and even in cmd I
typed "adb devices" and it not recognize it and I have the drivers installed, the 15 second 1click adb and fastboot.
And then I went to fastboot mode and then I tried first aid kit and the qualcomm mega unbrick guide and all the methods and still my oneplus 2 is not being recognized by PC and I am using the official oneplus 2 usb type c cable.
I have tried 2 windows 10 PC and I turned driver signniture enforcement off for the qualcomm drivers and nothing in device manager
I tried 1 Windows 7 PC and same thing and nothing in device manager
And I tried a Linux Mint virtual machine and I typed adb devices and fastboot device in the terminal and it was not recognizing it even though I installed the packages
So do you think the problem might be the cable? because it is the official one. But my device charges through the cable to and the cable was working before my phone got bricked. Or is it a driver problem? What do you guys think and please help and I will really appreciate it and thank you.
fahad999 said:
I have a bricked device and I would appreciate your help
here is how my oneplus 2 got bricked, I was on stock oxygen os 3.0 and rooted and I had twrp recovery 3.0.
So I did a full wipe on my device and when I was flashing the resurrection remix rom in twrp it said "Error 7" so then I reboot my phone and I was in a bootloop with no os.
I went back to twrp and flash the rom again and it not work. So then I tryed to transfer a file through my computer to my device and twrp was not recognizing it and tryed adb sideload and same thing and even in cmd I
typed "adb devices" and it not recognize it and I have the drivers installed, the 15 second 1click adb and fastboot.
And then I went to fastboot mode and then I tried first aid kit and the qualcomm mega unbrick guide and all the methods and still my oneplus 2 is not being recognized by PC and I am using the official oneplus 2 usb type c cable.
I have tried 2 windows 10 PC and I turned driver signniture enforcement off for the qualcomm drivers and nothing in device manager
I tried 1 Windows 7 PC and same thing and nothing in device manager
And I tried a Linux Mint virtual machine and I typed adb devices and fastboot device in the terminal and it was not recognizing it even though I installed the packages
So do you think the problem might be the cable? because it is the official one. But my device charges through the cable to and the cable was working before my phone got bricked. Or is it a driver problem? What do you guys think and please help and I will really appreciate it and thank you.
Click to expand...
Click to collapse
If your recovery mode is TWRP.. Then goto Mount -> Data
Then your computer will show your oneplus 2.
If still its not showing then update Driver Software of phone in device manager.
eldos777 said:
If your recovery mode is TWRP.. Then goto Mount -> Data
Then your computer will show your oneplus 2.
If still its not showing then update Driver Software of phone in device manager.
Click to expand...
Click to collapse
I tried both mount data on and off and still no luck, I have mtp enabled in twrp. I also checked device manager and there is nothing showing up. But twrp says that my phone is charging when my phone is connected to pc. I think the problem is probably the cable because the usb end of the cable looks sort of damaged, And I tried a Type-C OTG and put a usb on that and TWRP was not recognizing it
eldos777 said:
If your recovery mode is TWRP.. Then goto Mount -> Data
Then your computer will show your oneplus 2.
If still its not showing then update Driver Software of phone in device manager.
Click to expand...
Click to collapse
Holy crap the cable was the problem the whole time!!! I just went to the store and bought A new 3rd party USB-C cable and I plug it in to my pc and phone and immediately the pc installed drivers and now I could transfer files to TWRP from my PC!! It was a really hot sunny day today and I walked to the store which took 30 minutes and both ways 1 hour. I am so tired right now from the walk but it was worth it since my phone will be brought to life!! I am so happy right now!!!
fahad999 said:
Holy crap the cable was the problem the whole time!!! I just went to the store and bought A new 3rd party USB-C cable and I plug it in to my pc and phone and immediately the pc installed drivers and now I could transfer files to TWRP from my PC!! It was a really hot sunny day today and I walked to the store which took 30 minutes and both ways 1 hour. I am so tired right now from the walk but it was worth it since my phone will be brought to life!! I am so happy right now!!!
Click to expand...
Click to collapse
:good:
eldos777 said:
:good:
Click to expand...
Click to collapse
Thanks for your advice to for fixing the phone! I appreciate it!!
I have a big problem with the adb driver. It works perfectly to perfection when the phone is accessed both without usb debugging or with, adb devices detect the phone, and even fastboot when booting into the bootloader. The problem is that when I get into adb sideload from the original recovery my pc (windows 10 x64 build 1703) does not detect it, there is no way to make it work. I've tried changing a pc, cable, usb port, but always the same problem. I have installed and tried every type of driver, but there is no way to run it. I think the problem is oneplus5 stock recovery.
extremeinside said:
I have a big problem with the adb driver. It works perfectly to perfection when the phone is accessed both without usb debugging or with, adb devices detect the phone, and even fastboot when booting into the bootloader. The problem is that when I get into adb sideload from the original recovery my pc (windows 10 x64 build 1703) does not detect it, there is no way to make it work. I've tried changing a pc, cable, usb port, but always the same problem. I have installed and tried every type of driver, but there is no way to run it. I think the problem is oneplus5 stock recovery.
Click to expand...
Click to collapse
Is you're device connected with a USB 3.0/3.1 port maybe ? If so try a USB 2.0 port and install the latest ADB driver
Pieter20 said:
Is you're device connected with a USB 3.0/3.1 port maybe ? If so try a USB 2.0 port and install the latest ADB driver
Click to expand...
Click to collapse
I am also facing same problem...please help me
Does the stock recovery even have adb capabilities?
Tried miui 12 and after flashing rom the twrp is gone I tried to reflash it the same way I did first but sadly when I'm on fastboot PC can't detect it. also tried it with other softwares but same result. Device is fine and responds when open but not in fastboot mode. Currently running miui 11 .0.6 China stable. Stucked. Also all drivers are updated
Same here.
I accidentally flashed china stable 11.0.4 zip rom on my global device through twrp and upon booting up twrp was gone and when i plug in usb the pc doesn't detect anything. In order to make pc detect the phone via usb cable i have to reboot phone while plugging usb to laptop that way file transfer option shows up in laptop and adb works but fastboot doesn't work i can force boot to fastboot through adb but upon booting to fastboot the pc stucks at waiting for device. All the drivers are installed
Currently on china stable 11.0.6
Same issue indeed
That's exactly what's happening right now. I hope someone can help us
Quote me if u find any luck.
Same issues
That happens me sometimes. I only reboot the device into fastboot again, reboot the computer, and that it. This may change depending on your computer CPU, mine is AMD. And ussually I have to use a 2.0 USB or if it still does not work a USB 2.0 hub. I know the hub thing is strange but it worked for me when my pc does not detect the phone in fastboot. Hope it helps .
With my PC I have to open device manager, look for the device, usually has a yellow sign next to it. Right click on the device name, click update driver, click browse my computer for driver software, click let me pick from a list of available drivers on my computer and pick mtp USB device. Then I read it. I hope this helps.
daniml3 said:
That happens me sometimes. I only reboot the device into fastboot again, reboot the computer, and that it. This may change depending on your computer CPU, mine is AMD. And ussually I have to use a 2.0 USB or if it still does not work a USB 2.0 hub. I know the hub thing is strange but it worked for me when my pc does not detect the phone in fastboot. Hope it helps .
Click to expand...
Click to collapse
What hub?
Tried with multiple pcs with no success
epicblue8 said:
What hub?
Tried with multiple pcs with no success
Click to expand...
Click to collapse
I use a usb hub that is very old i guess, as it uses MiniUSB. By the way with multiple computer it should work, your error is very strange, I never saw it. A thing that may work is trying to use fastboot on a Linux system (no, with VMs no). So if you can flash a pen drive with a Ubuntu ISO or any linux distro, boot linux,install fastboot and check if it detects your phone.
daniml3 said:
I use a usb hub that is very old i guess, as it uses MiniUSB. By the way with multiple computer it should work, your error is very strange, I never saw it. A thing that may work is trying to use fastboot on a Linux system (no, with VMs no). So if you can flash a pen drive with a Ubuntu ISO or any linux distro, boot linux,install fastboot and check if it detects your phone.
Click to expand...
Click to collapse
Read my 1st reply to this op
Even file transfer option doesn't show up if i connect my phone via usb to laptop.
In order to make pc show file transfer option i have to reboot phone while connecting the phone to pc so.
That way i can use adb but as soon as i boot to fastboot via cmd pc doesn't detect the fastboot mode.
Tried with 3 laptops
Issue Fixed
epicblue8 said:
Same here.
I accidentally flashed china stable 11.0.4 zip rom on my global device through twrp and upon booting up twrp was gone and when i plug in usb the pc doesn't detect anything. In order to make pc detect the phone via usb cable i have to reboot phone while plugging usb to laptop that way file transfer option shows up in laptop and adb works but fastboot doesn't work i can force boot to fastboot through adb but upon booting to fastboot the pc stucks at waiting for device. All the drivers are installed
Currently on china stable 11.0.6
Click to expand...
Click to collapse
Dude I fixed it and I managed to flash global and maybe reflash EU when miui 12 stable arrive
Try another type c cord preferable the original one. I just change the cord and everything went fine fastboot can now be detected via "fastboot devices".
Chipotle crackers said:
Dude I fixed it and I managed to flash global and maybe reflash EU when miui 12 stable arrive
Try another type c cord preferable the original one. I just change the cord and everything went fine fastboot can now be detected via "fastboot devices".
Click to expand...
Click to collapse
Not with original but tried 3 type c cables and 3 pcs
epicblue8 said:
Quote me if u find any luck.
Click to expand...
Click to collapse
hey have find any solutions? we have the same problem