**UPDATE I have unbricked my phone and the whole time I thought it was a software issue on my phone but it was a cable, I guess my cable got broken when I bricked my phone and I thought it was a software issue but it was not the whole time**
I have a bricked device and I would appreciate your help and I have tried EVERYTHING!!
here is how my oneplus 2 got bricked, I was on stock oxygen os 3.0 and rooted and I had twrp recovery 3.0.
So I did a full wipe on my device and when I was flashing the resurrection remix rom in twrp it said "Error 7" so then I reboot my phone and I was in a bootloop with no os.
I went back to twrp and flash the rom again and it not work. So then I tryed to transfer a file through my computer to my device and twrp was not recognizing it and tryed adb sideload and same thing and even in cmd I
typed "adb devices" and it not recognize it and I have the drivers installed, the 15 second 1click adb and fastboot.
And then I went to fastboot mode and then I tried first aid kit and the qualcomm mega unbrick guide and all the methods and still my oneplus 2 is not being recognized by PC and I am using the official oneplus 2 usb type c cable.
I have tried 2 windows 10 PC and I turned driver signniture enforcement off for the qualcomm drivers and nothing in device manager
I tried 1 Windows 7 PC and same thing and nothing in device manager
And I tried a Linux Mint virtual machine and I typed adb devices and fastboot device in the terminal and it was not recognizing it even though I installed the packages
So do you think the problem might be the cable? because it is the official one. But my device charges through the cable to and the cable was working before my phone got bricked. Or is it a driver problem? What do you guys think and please help and I will really appreciate it and thank you.
fahad999 said:
I have a bricked device and I would appreciate your help
here is how my oneplus 2 got bricked, I was on stock oxygen os 3.0 and rooted and I had twrp recovery 3.0.
So I did a full wipe on my device and when I was flashing the resurrection remix rom in twrp it said "Error 7" so then I reboot my phone and I was in a bootloop with no os.
I went back to twrp and flash the rom again and it not work. So then I tryed to transfer a file through my computer to my device and twrp was not recognizing it and tryed adb sideload and same thing and even in cmd I
typed "adb devices" and it not recognize it and I have the drivers installed, the 15 second 1click adb and fastboot.
And then I went to fastboot mode and then I tried first aid kit and the qualcomm mega unbrick guide and all the methods and still my oneplus 2 is not being recognized by PC and I am using the official oneplus 2 usb type c cable.
I have tried 2 windows 10 PC and I turned driver signniture enforcement off for the qualcomm drivers and nothing in device manager
I tried 1 Windows 7 PC and same thing and nothing in device manager
And I tried a Linux Mint virtual machine and I typed adb devices and fastboot device in the terminal and it was not recognizing it even though I installed the packages
So do you think the problem might be the cable? because it is the official one. But my device charges through the cable to and the cable was working before my phone got bricked. Or is it a driver problem? What do you guys think and please help and I will really appreciate it and thank you.
Click to expand...
Click to collapse
If your recovery mode is TWRP.. Then goto Mount -> Data
Then your computer will show your oneplus 2.
If still its not showing then update Driver Software of phone in device manager.
eldos777 said:
If your recovery mode is TWRP.. Then goto Mount -> Data
Then your computer will show your oneplus 2.
If still its not showing then update Driver Software of phone in device manager.
Click to expand...
Click to collapse
I tried both mount data on and off and still no luck, I have mtp enabled in twrp. I also checked device manager and there is nothing showing up. But twrp says that my phone is charging when my phone is connected to pc. I think the problem is probably the cable because the usb end of the cable looks sort of damaged, And I tried a Type-C OTG and put a usb on that and TWRP was not recognizing it
eldos777 said:
If your recovery mode is TWRP.. Then goto Mount -> Data
Then your computer will show your oneplus 2.
If still its not showing then update Driver Software of phone in device manager.
Click to expand...
Click to collapse
Holy crap the cable was the problem the whole time!!! I just went to the store and bought A new 3rd party USB-C cable and I plug it in to my pc and phone and immediately the pc installed drivers and now I could transfer files to TWRP from my PC!! It was a really hot sunny day today and I walked to the store which took 30 minutes and both ways 1 hour. I am so tired right now from the walk but it was worth it since my phone will be brought to life!! I am so happy right now!!!
fahad999 said:
Holy crap the cable was the problem the whole time!!! I just went to the store and bought A new 3rd party USB-C cable and I plug it in to my pc and phone and immediately the pc installed drivers and now I could transfer files to TWRP from my PC!! It was a really hot sunny day today and I walked to the store which took 30 minutes and both ways 1 hour. I am so tired right now from the walk but it was worth it since my phone will be brought to life!! I am so happy right now!!!
Click to expand...
Click to collapse
:good:
eldos777 said:
:good:
Click to expand...
Click to collapse
Thanks for your advice to for fixing the phone! I appreciate it!!
Related
Hey guys any help or suggestions will be greatly appreciated on this matter. I will try to be as detailed as possible but I'm trying to fix this phone for a friend and he isn't very phone savvy. From what I understand, he was previously on CM10 and tried updating to CM11 using the cmupdater. For some reason it failed and he was stuck in TWRP. When he tried to reboot it kept kicking him back to recovery. He took his phone to a phone repair shop who then wiped his device. At this point he gave me the phone to try to fix.
First of all I have working fastboot and adb drivers for my Nexus 5 so I don't think this is a driver issue but I'm no expert on the Nexus 4 so I could be wrong. I'm also running Windows 8.1 if this is any relevance.
I can still access the devices bootloader (ver MAKOZ20i)
I can still access TWRP (ver 2.6.0.0)
When plugging the device into my USB 2.0 ports, nothing shows up in my device manager in bootloader, TWRP, or TWRP ADB sideload.
When plugging the device into my USB 3.0 ports, I see 'Unknown USB Device (Device Descriptor Request Failed)' and the Device Instance Path is 'USB\VID_0000&PID_0002\7&20F39B9B&0&2' in bootloader, TWRP, or TWRP ADB sideload.
I've never heard of a device not being seen at all in by USB 2.0 ports but showing using USB 3.0 ports so I attempted to give extra juice to the phone using a powered USB OTG cable. Still nothing shows up.
I've tried running 'fastboot device' and 'adb devices' with no luck.
I think I've covered all the bases... can anyone think of anything that could help me re-install a new rom or factory reset or his he out of luck?
I think it may be a Win8 problem. You have access to another machine with Win7 or WinXP?
Install "universal driver.exe" in win7, than connect phone while power off, I think it'll install driver...than push any custom ROM to phone via adb or just flash any official IMG..
Well I can tell you WHY it didn't work. That version of TWRP is not able to install 4.4 (CM11). if you manage to successfully push via adb and get it started again, make sure to flash the newest version of TWRP before trying that again.
Thanks for the reply guys. I kind of guessed that the version of TWRP was not compatible as I installed CM11 on my old Nook Tablet and had to update my recovery before installing it. Unfortunately the guys who wiped the phone prevented me from installing an old version of CM10 that my friend probably had from the cmupdater.
As for Windows 8 being the issue.. I attempted to try to use my laptop which runs Windows 7 but was unable to get anything to happen. Since the laptop only had USB 2.0 ports, plugging in the device to any of the ports did the exact same thing as what it did on my desktop (Windows doesn't even recognize anything is connected). I still get the charge animation on the phone but yea... nothing in device manager. I'm thinking of running Linux from a live installation to see if anything different happens, unfortunately its been ages since I've touched Linux so this is kind of a last ditch effort here.
Any other thoughts?
mrlazyone said:
Thanks for the reply guys. I kind of guessed that the version of TWRP was not compatible as I installed CM11 on my old Nook Tablet and had to update my recovery before installing it. Unfortunately the guys who wiped the phone prevented me from installing an old version of CM10 that my friend probably had from the cmupdater.
As for Windows 8 being the issue.. I attempted to try to use my laptop which runs Windows 7 but was unable to get anything to happen. Since the laptop only had USB 2.0 ports, plugging in the device to any of the ports did the exact same thing as what it did on my desktop (Windows doesn't even recognize anything is connected). I still get the charge animation on the phone but yea... nothing in device manager. I'm thinking of running Linux from a live installation to see if anything different happens, unfortunately its been ages since I've touched Linux so this is kind of a last ditch effort here.
Any other thoughts?
Click to expand...
Click to collapse
One more, when you plug into usb 3.0 you can see unknown device Right ??
If yes, download driver files from here Here.
It's a zip contains .inf files, Now click on unknown device and select update drivers then give the path to these drivers manually.
Hope this will help you out.
I'm pretty convinced at this point that the phone can't be fixed by me. Running it through Ubuntu I can't see the device at all (USB 2 & 3) when running the lsusb command but it sees my nexus 5 just fine. I even tried modifying drivers to match vendor id product id and class id as reported by windows. Thanks for the suggestions. Does anyone know of a reputable service to get this phone repaired? How much does a JTAG repair usually cost?
Sent from my Nexus 5 using XDA Premium 4 mobile app
mrlazyone said:
I'm pretty convinced at this point that the phone can't be fixed by me. Running it through Ubuntu I can't see the device at all (USB 2 & 3) when running the lsusb command but it sees my nexus 5 just fine. I even tried modifying drivers to match vendor id product id and class id as reported by windows. Thanks for the suggestions. Does anyone know of a reputable service to get this phone repaired? How much does a JTAG repair usually cost?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The following method may still help
http://forum.xda-developers.com/nexus-4/general/tutorial-how-to-unbrick-n4-t2347060
DrFredPhD said:
The following method may still help
http://forum.xda-developers.com/nexus-4/general/tutorial-how-to-unbrick-n4-t2347060
Click to expand...
Click to collapse
Awesome! Didn't realize this was an option. It didn't work using the USB 3.0 ports but the USB 2.0 actually worked for this method. Thank you!
SOLVED!
Hello All.. I have searching for hours not making much progress. Last night my LG G2 ran out of battery and I plugged it into the car charger and it soft bricked. I've been pretty busy lately so I'm on an old ROM Optimus DE 2.2. I don't have the ROM saved and I've been trying to ADB sideload the ROM back onto my phone but in the command prompt it says device not found. I tried installing some generic drivers and that didn't work. I tried the LGUnitedMobileDriver and that isn't working either.
I'm not sure what to do next. I have ADB on my computer and ADB sideload on my TWRP recovery, so I would like to push the ROM on my phone so I can flash it without having to wipe my phone. What drivers do I need; right now my phone shows up under other devices in device manager. Or am I sideloading wrong? Any help please lol..
I was caught off guard because of the random soft brick. If I would have been working on my phone I would have had the proper backups made. Thanks for any help, it is much needed I need my phone back ASAP!! Thanks again.
SOLVED
Finally figured it out. I had to updated my device (LG G2) with the ADB drivers not the LG drivers.
I went into Device Manager, right clicked my phone, clicked update driver software, clicked browse my computer, clicked let me pick from a list of drivers, then selected ADB drivers, then selected HTC Dream Composite ADB Interface. I believe the drivers I last installed were Snoop05's adb-setup-1.4.2.
Then I did a backup in TWRP, then I sideloaded the ROM. Next I had to wipe everything but internal memory and the use Nandroid Manager to restore my data from the backup... Took my whole day but at least I have a phone again.
The car charger soft bricked it ?
So you have TWRP, the drivers you can get from the LG site too. Just search for your model and go to software update section. This is for D802, i dont know if the drivers are the same: http://www.lg.com/uk/support-mobile/lg-D802
Hmm..i dont know how to use the sideload..
Another way can be with USB flash drive and OTG cable, i used my usb flash drive with OTG cable to flash ROMs from TWRP
Last option is lg flash tool and then reroot
Thanks for your help guys.. I appreciate it! Looks like I just needed to update my phone with the ADB drivers in Windows 8 Device Manager. I'm back up and running.
But yea so weird.. I haven't flashed anything on this phone in months so I guess something was corrupted when it died. I think it was trying to boot with too low of a charge and the battery died mid boot which corrupted something.
Although you've solved it let me recommend you another way.
Use : "adb push romname.zip /sdcard/romname.zip"
instead of "adb sideload romname.zip"
- How My Phone Got Bricked?: (Chinese Version Oneplus 2) I Was On Oxygen OS 3.0 And TWRP 3.0 And I Decided To Flash The Resurrection Remix ROM, I Did A Full Wipe And I Installed The Rom And It Failed To Installed The ROM. Now My Phone Is In A Bootloop With No OS Installed. I Have The Chinese Version OP2
- Current State Of My Device: My Device Is In A Bootloop With No OS Installed, I Did Notice That My Phone Was Not Being Recognized VIA Fastboot & ADB On My PC. I Went Fastboot Mode And My Phone Is Not Being Recognized By PC, And I Went To TWRP, ADB Was Not Working And ADB Sideload Is Not Working. I Also Tried A USB OTG With A USB Drive And Still TWRP Recovery Is Not Recognizing It. How Ever When I Connect My Device To PC And Check Device Manager And Press Scan For Hard Ware Changes My Device Shows Up As "COM 1". I Also Did Try To Put My Phone Into Qualcomm Mode Trying Alot Of Key Combinations But My Phone Is Not Getting Into Qualcomm Mode Or It Just Might Be Me Since I Heard Its Tricky For The Phone To Get Into Qualcomm Mode. I Did Try One Click ADB And Fastboot Installed And Qualcomm USB Driver, Still No Luck. And I Did Try The MEGA Unbrick Guide. I Have Tried This With 3 Other Computers Which Are All Running Windows 10 And Turned Driver Signature Enforcement Off And Still No Luck, And Also A PC Running Linux Mint And Still No Luck. Please Help Me And I Will Put All Thanks On All Of Your Replies And I Really Appreciate Your Help!
- Whats Working:
- My Device Charges From The PC And Wall
- I Am Using The Official OP2 Cable
- Can Access Recovery + Fastboot
- Turns On But In A Bootloop
I think it's a bad cable... if you can get into fastboot and the PC with Windows 10 and Linux both don't see it.. cable
Not sure whats needed on windows, since I never use it....but after a fresh install of Ubuntu 16.04 a few days ago, I did have to install a few adb and fastboot packages before my devices were recognized. Do you know if the adb/fastboot packages and they're dependencies are installed on the Linux mint computer?
If yes, power off phone and plug into computer. Then start phone in fastboot mode. Open a terminal on the PC and run "adb devices" (without quotes of course) .....any output on screen?
foomanjackel said:
Not sure whats needed on windows, since I never use it....but after a fresh install of Ubuntu 16.04 a few days ago, I did have to install a few adb and fastboot packages before my devices were recognized. Do you know if the adb/fastboot packages and they're dependencies are installed on the Linux mint computer?
If yes, power off phone and plug into computer. Then start phone in fastboot mode. Open a terminal on the PC and run "adb devices" (without quotes of course) .....any output on screen?
Click to expand...
Click to collapse
Yeah I did try typing ADB devices and Fastboot devices in both twrp and fastboot. I think the issue might be the cable
evertking said:
I think it's a bad cable... if you can get into fastboot and the PC with Windows 10 and Linux both don't see it.. cable
Click to expand...
Click to collapse
Yeah I think the cable is probably the problem. Although my phone chargers with the cable. I will look into buying a new cable soon but its a little expensive. I will try to buy it next week
fahad999 said:
Yeah I think the cable is probably the problem. Although my phone chargers with the cable. I will look into buying a new cable soon but its a little expensive. I will try to buy it next week
Click to expand...
Click to collapse
I'm sure you been reading and seen people with the same cable as ours with the same problem.. works with charging but not adb or fastboot. But you can try to issue a command with it.. fastboot devices does sometimes come back empty.. just try to do OEM unlock for example.
evertking said:
I'm sure you been reading and seen people with the same cable as ours with the same problem.. works with charging but not adb or fastboot. But you can try to issue a command with it.. fastboot devices does sometimes come back empty.. just try to do OEM unlock for example.
Click to expand...
Click to collapse
My cable did used to work with adb and fastboot before, and I did unlock the bootloader with it before. I think now the cable got broken
Same issue working cable
Same issue... but my cable is working fine. I have a 2nd OP2 and tried the qualcomm connect with my cable and volume up, and worked perfect. More over, I swapped motherboards and still didnt work. I have access to twrp on the phone and I can get into fastboot. But no way to connect to my pc
Hey guys,
Earlier today I wiped my phone while trying to update the system, but when I tried to install the update it failed. That means that I'm now sitting without an OS on my phone, only able to access TWRP Recovery and Fastboot. I've successfully installed adb drivers and all of that, but when connecting the phone to a computer ADB doesn't find any devices and device manager only sees it as an unknown USB device (Device Descriptor Request Failed). I have been seaching for a couple of hours now and have not been able to find anything that works, so I'm hoping that you guys can help.
Try this
http://forum.xda-developers.com/oneplus-2/general/guide-official-stock-reset-to-oos-2-2-0-t3290707
sonyD4d said:
http://forum.xda-developers.com/oneplus-2/general/guide-official-stock-reset-to-oos-2-2-0-t3290707
Click to expand...
Click to collapse
When I try to update the driver, as it says in step A-7, the only unknown device is the unknown usb device and when I try to update that one with the qc folder, it just says that Windows have determined that it is up to date?
MrFreaky said:
Hey guys,
Earlier today I wiped my phone while trying to update the system, but when I tried to install the update it failed. That means that I'm now sitting without an OS on my phone, only able to access TWRP Recovery and Fastboot. I've successfully installed adb drivers and all of that, but when connecting the phone to a computer ADB doesn't find any devices and device manager only sees it as an unknown USB device (Device Descriptor Request Failed). I have been seaching for a couple of hours now and have not been able to find anything that works, so I'm hoping that you guys can help.
Click to expand...
Click to collapse
Have you tried connecting to PC while in TWRP recovery ? You should be able to access internal storage using mtp. Then you can copy another rom & flash it.
I have tried connecting to Windows 8.1 on a Macbook Pro while in TWRP Recovery, and that's where it said it was an unknown USB device.
MrFreaky said:
I have tried connecting to Windows 8.1 on a Macbook Pro while in TWRP Recovery, and that's where it said it was an unknown USB device.
Click to expand...
Click to collapse
Try with another cable
Yousvel said:
Try with another cable
Click to expand...
Click to collapse
Any other ideas, because I do not own any other USB type C cables. The one I'm using is the one that came with the phone, but I have never had any issues with it.
MrFreaky said:
I have tried connecting to Windows 8.1 on a Macbook Pro while in TWRP Recovery, and that's where it said it was an unknown USB device.
Click to expand...
Click to collapse
Lets try installing the drivers again. If this doesn't work, then it should be a cable issue OR usb port issue. Try this on another pc.
1. Download Oneplus2 USB drivers -> https://www.androidfilehost.com/?fid=24052804347833370
2. Before installing the drivers, Disable Driver Signature Enforcement. -> https://www.youtube.com/watch?v=NM1MN8QZhnk
3. Install the drivers & Restart.
4. Now try either connecting to pc while in TWRP or fastboot.
you can flash factory image through fastboot
MrFreaky said:
Any other ideas, because I do not own any other USB type C cables. The one I'm using is the one that came with the phone, but I have never had any issues with it.
Click to expand...
Click to collapse
Maybe this is a bit annoying but the best solution is to buy another cable since a few weeks ago I had the same problem, bought a new cable and the problem was solved. Hope this helps
Then flash the OS through TWRP using the advanced tool that allows you to sideload files using adb.
B!Gguy said:
Have you tried connecting to PC while in TWRP recovery ? You should be able to access internal storage using mtp. Then you can copy another rom & flash it.
Click to expand...
Click to collapse
How to enter mtp on recovery/fastboot?
I've done the same thing in the past (erase everything) , the solution that worked for me is this:
1.Always have a twrp back up on a usb stick.
2.Buy a cheap usb 2 type c to usb adaptor.
3.Enter twrp and restore the back up.
This way you do not need a pc/drivers etc.
I hope it helps.
simkhadalila said:
How to enter mtp on recovery/fastboot?
Click to expand...
Click to collapse
Enter TWRP recovery & connect to the pc.
B!Gguy said:
Enter TWRP recovery & connect to the pc.
Click to expand...
Click to collapse
I did it but but...can't detect PC my this device (mtp).
simkhadalila said:
I did it but but...can't detect PC my this device (mtp).
Click to expand...
Click to collapse
Looks like you haven't installed oneplus usb drivers. Install the drivers & try again.
Drivers -> http://www.technobuzz.net/oneplus-2-usb-drivers/
Tried miui 12 and after flashing rom the twrp is gone I tried to reflash it the same way I did first but sadly when I'm on fastboot PC can't detect it. also tried it with other softwares but same result. Device is fine and responds when open but not in fastboot mode. Currently running miui 11 .0.6 China stable. Stucked. Also all drivers are updated
Same here.
I accidentally flashed china stable 11.0.4 zip rom on my global device through twrp and upon booting up twrp was gone and when i plug in usb the pc doesn't detect anything. In order to make pc detect the phone via usb cable i have to reboot phone while plugging usb to laptop that way file transfer option shows up in laptop and adb works but fastboot doesn't work i can force boot to fastboot through adb but upon booting to fastboot the pc stucks at waiting for device. All the drivers are installed
Currently on china stable 11.0.6
Same issue indeed
That's exactly what's happening right now. I hope someone can help us
Quote me if u find any luck.
Same issues
That happens me sometimes. I only reboot the device into fastboot again, reboot the computer, and that it. This may change depending on your computer CPU, mine is AMD. And ussually I have to use a 2.0 USB or if it still does not work a USB 2.0 hub. I know the hub thing is strange but it worked for me when my pc does not detect the phone in fastboot. Hope it helps .
With my PC I have to open device manager, look for the device, usually has a yellow sign next to it. Right click on the device name, click update driver, click browse my computer for driver software, click let me pick from a list of available drivers on my computer and pick mtp USB device. Then I read it. I hope this helps.
daniml3 said:
That happens me sometimes. I only reboot the device into fastboot again, reboot the computer, and that it. This may change depending on your computer CPU, mine is AMD. And ussually I have to use a 2.0 USB or if it still does not work a USB 2.0 hub. I know the hub thing is strange but it worked for me when my pc does not detect the phone in fastboot. Hope it helps .
Click to expand...
Click to collapse
What hub?
Tried with multiple pcs with no success
epicblue8 said:
What hub?
Tried with multiple pcs with no success
Click to expand...
Click to collapse
I use a usb hub that is very old i guess, as it uses MiniUSB. By the way with multiple computer it should work, your error is very strange, I never saw it. A thing that may work is trying to use fastboot on a Linux system (no, with VMs no). So if you can flash a pen drive with a Ubuntu ISO or any linux distro, boot linux,install fastboot and check if it detects your phone.
daniml3 said:
I use a usb hub that is very old i guess, as it uses MiniUSB. By the way with multiple computer it should work, your error is very strange, I never saw it. A thing that may work is trying to use fastboot on a Linux system (no, with VMs no). So if you can flash a pen drive with a Ubuntu ISO or any linux distro, boot linux,install fastboot and check if it detects your phone.
Click to expand...
Click to collapse
Read my 1st reply to this op
Even file transfer option doesn't show up if i connect my phone via usb to laptop.
In order to make pc show file transfer option i have to reboot phone while connecting the phone to pc so.
That way i can use adb but as soon as i boot to fastboot via cmd pc doesn't detect the fastboot mode.
Tried with 3 laptops
Issue Fixed
epicblue8 said:
Same here.
I accidentally flashed china stable 11.0.4 zip rom on my global device through twrp and upon booting up twrp was gone and when i plug in usb the pc doesn't detect anything. In order to make pc detect the phone via usb cable i have to reboot phone while plugging usb to laptop that way file transfer option shows up in laptop and adb works but fastboot doesn't work i can force boot to fastboot through adb but upon booting to fastboot the pc stucks at waiting for device. All the drivers are installed
Currently on china stable 11.0.6
Click to expand...
Click to collapse
Dude I fixed it and I managed to flash global and maybe reflash EU when miui 12 stable arrive
Try another type c cord preferable the original one. I just change the cord and everything went fine fastboot can now be detected via "fastboot devices".
Chipotle crackers said:
Dude I fixed it and I managed to flash global and maybe reflash EU when miui 12 stable arrive
Try another type c cord preferable the original one. I just change the cord and everything went fine fastboot can now be detected via "fastboot devices".
Click to expand...
Click to collapse
Not with original but tried 3 type c cables and 3 pcs
epicblue8 said:
Quote me if u find any luck.
Click to expand...
Click to collapse
hey have find any solutions? we have the same problem