Asus ZMPM1 3/32 model. I was on Havoc Pie official with TWRP 3.2.3. I flashed 327 stock rom using TWRP, now I've lost the TWRP. So when I go to flash TWRP using ADB ,I type the command and the process pauses and the phone shows the message "Press any key to shut down". Please help.
i had the same issue not sure why but it did not work when i connected it to a usb 3.0 port but worked with a usb 2.0 port try that
same problem
Deeptesh Basak said:
Asus ZMPM1 3/32 model. I was on Havoc Pie official with TWRP 3.2.3. I flashed 327 stock rom using TWRP, now I've lost the TWRP. So when I go to flash TWRP using ADB ,I type the command and the process pauses and the phone shows the message "Press any key to shut down". Please help.
Click to expand...
Click to collapse
facing the excat issue. Note: Tried all USB ports in my laptop.
Solved
Deeptesh Basak said:
Asus ZMPM1 3/32 model. I was on Havoc Pie official with TWRP 3.2.3. I flashed 327 stock rom using TWRP, now I've lost the TWRP. So when I go to flash TWRP using ADB ,I type the command and the process pauses and the phone shows the message "Press any key to shut down". Please help.
Click to expand...
Click to collapse
faced the issue untill I realized it was an issue regarding USB 3.0. The phone cannot support such a higher data speed. Use a USB 2.0 hub between your PC and your phone. That solved my problem.
For some reason connecting the phone to a usb 2.0 port in my laptop also did not solve the problem.
Btw, issue came up for me after recent update to pie
Try usb hub
Deeptesh Basak said:
Asus ZMPM1 3/32 model. I was on Havoc Pie official with TWRP 3.2.3. I flashed 327 stock rom using TWRP, now I've lost the TWRP. So when I go to flash TWRP using ADB ,I type the command and the process pauses and the phone shows the message "Press any key to shut down". Please help.
Click to expand...
Click to collapse
UP iam facing that too
I am facing this too , After recent pie update my Camera2api got disabled when trying to enable it I got this issue and still i couldn't enable it
tried another pc and it says okay but still it is in legacy
I have been trying to flash twrp since January. Still no luck. Can anyone help? I have been following the exact steps mentioned in the respective threads for every twrp version i tried. USB 2.0, changing data cables, unlocking using officia unlock tool because unofficially unlock process didn't worked when i tried. It got stuck. All it shows is "press any key to shutdown ".
This is my 3rd android phone which I'm using right now. Always used custom roms. And now its frustrating that I'm stuck at the starting line of it all... Please help me
starlord143 said:
I have been trying to flash twrp since January. Still no luck. Can anyone help? I have been following the exact steps mentioned in the respective threads for every twrp version i tried. USB 2.0, changing data cables, unlocking using officia unlock tool because unofficially unlock process didn't worked when i tried. It got stuck. All it shows is "press any key to shutdown ".
This is my 3rd android phone which I'm using right now. Always used custom roms. And now its frustrating that I'm stuck at the starting line of it all... Please help me
Click to expand...
Click to collapse
You have already tried USB HUB? I switched to USB 2.0 port, but don't work. For me, the USB HUB connection, a particular USB 1.1, works.
renda-l said:
You have already tried USB HUB? I switched to USB 2.0 port, but don't work. For me, the USB HUB connection, a particular USB 1.1, works.
Click to expand...
Click to collapse
I Don't have a usb hub and my patience is also running out. Thanks though
Worked well
Broh. For last two days i also facing the same issue. Today I made it.
Without closing 'command' box in pc, and removing usb,,... keep restart to fastboot mode.
Or
Restart pc without unplugging usb(mobile should be on fast boot mode) direct open flashall_aft.bat/ flashall_bat.cmd....
It it bcoz...fastboot commands are not supported on AMD processors..
U have to use usb 2.0 external hubs as it wont work on built-in usb 2.0 ports also...
Or switch to some intel machine
Restart in FB mode.
Connect phone to pc with 2.0 port.
Type this cmd:
fastboot boot twrp.img
(The file should be in ADB folder itself. Here twrp.img can be replaced with the file name which u have but should be a recovery of your phone only)
This cmd will temporarily boot your device in Twrp; if not try to hard pess those keys to boot to recovery.
From Twrp flash again Twrp.img to flash Twrp permanently. Now again reboot to recovery to test it.
I hope this will help
Asus Zenfone Max pro m2
Guys,
I have a problem that my phone (Asus zenfone max pro m2)was bootloader unlocked but was running Asus Official ROM, recently phone got turned off itself while using and not starting past boot.
When i try to flash on fast boot mode i dont see any devices connected, can someone suggest me further? it ll be really helpful to get my phone back
C:\adb>adb devices
List of devices attached
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\adb>adb devices
List of devices attached
C:\adb>
==============================
Trying fastboot - press any key to shutdown
usb hub worked for me too
@nabinshajm I also tried using both the USB but didn't work. Do you got the solution ?
Related
Hi!, I have a bricked Oneplus 2 so heres how it happened
My device was running oxygen os 3.0 with TWRP 3.0 and I decided to flash the resurrection remix ROM on my phone through twrp, and when I did flash it I think it gave me some error code, and then I rebooted my phone and now its stuck in a bootloop with no OS installed.
I tried going to TWRP and adb was not working and adb side load was not working, I went to fastboot and my computer wont detect my device through fastboot. I tried first aid kit and my phone was not being detected. I did try this with using 2 other computers running windows 10 and I tried it with a computer running Linux Mint. How ever when I check in Device Manager It shows "communications port (COM1) I tried updating that driver with the Oneplus 2 Qualcom drivers and it gave me a error code 10 and I tried installing an ADB interface driver to that to and I got the same error code 10. I also tried this method below with no luck.
"https://forums.oneplus.net/threads/updated-29-03-2016-mega-unbrick-guide-for-a-hard-bricked-oneplus-2.347607/"
Please help me and the community facing this problem, Thanks!
I have a same problem. so any advice how to fix this is more than welcome. Except Firstaid kit gave back Recovery (twrp) which Oxygen 3.0 Beta removed etc, Now i have TWRP 2.8.7.0 and thats it. PC just dont find device so that i could transfer nesessary files
E: Does it matter is this Oneplus 2 recovery tool for A2001 or A2003? i just noticed that the one i downloaded, folder name is A2001_save_brick_mini
SirMika said:
I have a same problem. so any advice how to fix this is more than welcome. Except Firstaid kit gave back Recovery (twrp) which Oxygen 3.0 Beta removed etc, Now i have TWRP 2.8.7.0 and thats it. PC just dont find device so that i could transfer nesessary files
E: Does it matter is this Oneplus 2 recovery tool for A2001 or A2003? i just noticed that the one i downloaded, folder name is A2001_save_brick_mini
Click to expand...
Click to collapse
I caint do any thing in twrp to, but I heard that there was a problem with twrp 3.0 that you caint transfer any files to pc, I think you might fix the problem by getting a usb type c usb otg and flashing the stock rom from there possibly. but I doint want to pay the price for it right now, but hopefully I will find a solution
SirMika said:
I have a same problem. so any advice how to fix this is more than welcome. Except Firstaid kit gave back Recovery (twrp) which Oxygen 3.0 Beta removed etc, Now i have TWRP 2.8.7.0 and thats it. PC just dont find device so that i could transfer nesessary files
E: Does it matter is this Oneplus 2 recovery tool for A2001 or A2003? i just noticed that the one i downloaded, folder name is A2001_save_brick_mini
Click to expand...
Click to collapse
And does your phone get recognized by fast boot? because you were saying that you used first aid to get recovery, and first aid uses fastboot, because you will beable to fix your phone through fastboot
yes, i just run fastboot commands and its unlocked etc but PC dont find OPT
---------- Post added at 10:27 AM ---------- Previous post was at 10:23 AM ----------
i just cant figure out how i transfer flashable zips in device to get oxygen or some decent rom
SirMika said:
yes, i just run fastboot commands and its unlocked etc but PC dont find OPT
---------- Post added at 10:27 AM ---------- Previous post was at 10:23 AM ----------
i just cant figure out how i transfer flashable zips in device to get oxygen or some decent rom
Click to expand...
Click to collapse
This might help you if your phone can be detected in fastboot:
http://www.androidsage.com/2016/03/12/restore-oneplus-2-full-stock-firmware/
It is a stock rom that you flash through fastboot
fahad999 said:
This might help you if your phone can be detected in fastboot:
http://www.androidsage.com/2016/03/12/restore-oneplus-2-full-stock-firmware/
It is a stock rom that you flash through fastboot
Click to expand...
Click to collapse
Sure i can try but i dont expect to get this work anymore..at leat awhile. earlier i tried to sideload stock OxygenOS but it failed because it says i need adb v 1.0.32 or newer, and surprise surprise it dont work properly in Windows 10.
SirMika said:
Sure i can try but i dont expect to get this work anymore..at leat awhile. earlier i tried to sideload stock OxygenOS but it failed because it says i need adb v 1.0.32 or newer, and surprise surprise it dont work properly in Windows 10.
Click to expand...
Click to collapse
It should work if your phone is recognized by fastboot, you have to download stock rom fastboot file and extract it, then connect your phone to fastboot to pc, then in the stockrom file click the run-all.bat and your phone should work but the problem with my phone is that my phone is not being recognized by fastboot
fahad999 said:
It should work if your phone is recognized by fastboot, you have to download stock rom fastboot file and extract it, then connect your phone to fastboot to pc, then in the stockrom file click the run-all.bat and your phone should work but the problem with my phone is that my phone is not being recognized by fastboot
Click to expand...
Click to collapse
not sure but i did similar procedure yesterday. see second post http://forum.xda-developers.com/oneplus-2/general/rom-mirrors-official-oxygen-os-roms-ota-t3209863 but i had no idea what i suppose to do..all i had was stock recovery..
in adb, running command fastboot device it shows my phone
Guys I am stuck too, form oxygen os 3.0 I decided to restore my all old backup from twrp, and now my device is fried, recovery is not working too. I tried ton of ways, it can boot into fastboot, but my pc cannot detect it for some reason. In pc no fastboot devices. Nothing in ports. that 10second trick is also not working. Someone plz help
Getsuga Tenshou said:
Guys I am stuck too, form oxygen os 3.0 I decided to restore my all old backup from twrp, and now my device is fried, recovery is not working too. I tried ton of ways, it can boot into fastboot, but my pc cannot detect it for some reason. In pc no fastboot devices. Nothing in ports. that 10second trick is also not working. Someone plz help
Click to expand...
Click to collapse
it seems there is no way to fix it..my skills and knoledge aint high, but i´v done all by the book and nothing. it also goes in fastboot and twrp but thats it. i wish i could help you but were in a same boat
Getsuga Tenshou said:
Guys I am stuck too, form oxygen os 3.0 I decided to restore my all old backup from twrp, and now my device is fried, recovery is not working too. I tried ton of ways, it can boot into fastboot, but my pc cannot detect it for some reason. In pc no fastboot devices. Nothing in ports. that 10second trick is also not working. Someone plz help
Click to expand...
Click to collapse
Danm, that sucks. Later I may try using a virtual machine of Linux Mint on my computer and see if it will detect my phone in fastboot. And the sad thing is that this oneplus 2 is my only phone
Getsuga Tenshou said:
Guys I am stuck too, form oxygen os 3.0 I decided to restore my all old backup from twrp, and now my device is fried, recovery is not working too. I tried ton of ways, it can boot into fastboot, but my pc cannot detect it for some reason. In pc no fastboot devices. Nothing in ports. that 10second trick is also not working. Someone plz help
Click to expand...
Click to collapse
Just to refresh, the problem that we are looking at is that your PC does not recognize our phone (Driver Problem)
So together we have to find a solution to this driver problem, so this is the main problem. I myself am running Windows 10
fahad999 said:
Just to refresh, the problem that we are looking at is that your PC does not recognize our phone (Driver Problem)
So together we have to find a solution to this driver problem, so this is the main problem. I myself am running Windows 10
Click to expand...
Click to collapse
I think i need to get in my hands PC with Win7. i also came that conclusion the problem is Windows.
Oneplus drivers (/D) just keep pop-upping asking what todo, when selected nothing happens
EDIT: is it possible install proper softwares via USBstorage?
Guys, I am running a dual boot machine (windows 7 and 10) and on both there is not even a sign of detection. Same is happening on another laptop which runs on windows 7 too. Only phone boots to bootloader on connected (like a charger and nothing else).
Just before my fp stopped working. Last time it did, my usb type c cable also died. This time I don't know since I directly restored from twrp and did not connect it to my pc. There is a slight chance that our usb type c cables have malfunctioned (which is better than permanent brick). If you have any access/ friend with that cable please try it. If it works we might be in luck.
Note: SirMika, For you usb is working, you do not need to try this, did you try flashing revert files
Getsuga Tenshou said:
Guys, I am running a dual boot machine (windows 7 and 10) and on both there is not even a sign of detection. Same is happening on another laptop which runs on windows 7 too. Only phone boots to bootloader on connected (like a charger and nothing else).
Just before my fp stopped working. Last time it did, my usb type c cable also died. This time I don't know since I directly restored from twrp and did not connect it to my pc. There is a slight chance that our usb type c cables have malfunctioned (which is better than permanent brick). If you have any access/ friend with that cable please try it. If it works we might be in luck.
Note: SirMika, For you usb is working, you do not need to try this, did you try flashing revert files
Click to expand...
Click to collapse
I just got a Linux Mint virtual machine and still the phone is not being detected via ADB and Fastboot in Linux Mint, I think the only possible solution that we have is purchasing a USB Type C USB OTG and Side-loading a ROM on their and flashing it through recovery. But this possible solution is for people who still have access to their recovery and luckily I do.
Oxygen OS 3.0 Flashable ZIP: http://downloads.oneplus.net/2016-03-30/op2/OnePlus_2_OxygenOS_3.0_Beta/
USB TYPE C OTG: http://www.amazon.com/Adapter-RAVPo...qid=1463938874&sr=8-1&keywords=usb+type+c+otg
fahad999 said:
I just got a Linux Mint virtual machine and still the phone is not being detected via ADB and Fastboot in Linux Mint, I think the only possible solution that we have is purchasing a USB Type C USB OTG and Side-loading a ROM on their and flashing it through recovery. But this possible solution is for people who still have access to their recovery and luckily I do.
Oxygen OS 3.0 Flashable ZIP: http://downloads.oneplus.net/2016-03-30/op2/OnePlus_2_OxygenOS_3.0_Beta/
USB TYPE C OTG: http://www.amazon.com/Adapter-RAVPo...qid=1463938874&sr=8-1&keywords=usb+type+c+otg
Click to expand...
Click to collapse
Update! I know why our phones are bricked! when we installed custom roms you wiped the phone right. I was reading that there was a new feature in android in which you wipe the phone with a password, the bootloader gets locked. So I believe that our devices now have a locked bootloader
fahad999 said:
I caint do any thing in twrp to, but I heard that there was a problem with twrp 3.0 that you caint transfer any files to pc, I think you might fix the problem by getting a usb type c usb otg and flashing the stock rom from there possibly. but I doint want to pay the price for it right now, but hopefully I will find a solution
Click to expand...
Click to collapse
in twrp press format data (i mean format data no wipe data)...then yes...reboot and now your phone is well partitioned
after that (in orange twrp flash a oxygen oos 3.0 or h2os) or if you want to return to oos 2.x or any other custom rom use the LP steps in this forum....http://forum.xda-developers.com/oneplus-2/general/guide-helper-zips-to-switch-oos-3-0-oos-t3351253
---------- Post added at 10:26 PM ---------- Previous post was at 10:15 PM ----------
Getsuga Tenshou said:
Guys I am stuck too, form oxygen os 3.0 I decided to restore my all old backup from twrp, and now my device is fried, recovery is not working too. I tried ton of ways, it can boot into fastboot, but my pc cannot detect it for some reason. In pc no fastboot devices. Nothing in ports. that 10second trick is also not working. Someone plz help
Click to expand...
Click to collapse
see in connected devices that there is one that has no name or isnt recogniced the press update driver and choose update from a list drivers not update from online then choose android device and then try every (google or clockworkmod driver i think that the one who work is android adb interface...then your computer should detect your phone if not search one the internet because every computer is different in terms of drivers i am telling you the way that i solve alway in mine (you can allways use that chinese program to restore your phone to oos 2.1.1)
Guihardrock said:
in twrp press format data (i mean format data no wipe data)...then yes...reboot and now your phone is well partitioned
after that (in orange twrp flash a oxygen oos 3.0 or h2os) or if you want to return to oos 2.x or any other custom rom use the LP steps in this forum....http://forum.xda-developers.com/oneplus-2/general/guide-helper-zips-to-switch-oos-3-0-oos-t3351253
---------- Post added at 10:26 PM ---------- Previous post was at 10:15 PM ----------
see in connected devices that there is one that has no name or isnt recogniced the press update driver and choose update from a list drivers not update from online then choose android device and then try every (google or clockworkmod driver i think that the one who work is android adb interface...then your computer should detect your phone if not search one the internet because every computer is different in terms of drivers i am telling you the way that i solve alway in mine (you can allways use that chinese program to restore your phone to oos 2.1.1)
Click to expand...
Click to collapse
Sorry to say that this is not working for me and I have no OS installed, I formatted data in twrp and typed yes and still I got no luck. My device is not being recognized by pc in twrp, I installed many drivers (Oneplus Drivers, Google USB Drivers, 15 Sec ADB & Fastboot Drivers, Universal ADB Drivers) Still I got no luck, and nothing shows up in device manager, I tried this in 2 Computers awwell.
i have unlocked bootloader, latest TWRP but no OS. instead zip fils it should be image. adb cant find phone but fast boot does
I made a thread earlier regarding "Press any key to shut down" Fastboot error.
I have just bought a new laptop ,Acer Predator Helios 300. It has windows 10 1803 update.
I have no errors in device manager. It shows Asus ABD Interface and when in fastboot mode it shows ABD bootloader in Device manager. No errors.
When I enter the command fastboot devices.. it shows my device ID but as soon as I enter the command to flash twrp ,the fastboot mode on my phone closes and shows the message "Press any key to shut down" and basically the flashing doesn't start.
I figured out the error was due to the USB 3.0 port by digging through forums so I tried the USB 2.0 ports and sometimes I get the same error and other times I'm getting another error called remote error file larger than allowed size something something and the flashing fails.
I'm also unable to flash stock fastboot rom. I'm breaking my head over this the whole day. Frustrated I made this post. My old laptop has no issues but I don't know what is happening with my new one. All the correct drivers are loaded. Currently I'm using Pixel experience.
Hello bro . I have the same issue . I also own Acer predator I'm not able to flash anything after flashing 327 twrp build . Getting the same error as you are . Please do tell me if you find a solution
I think you might have this issue then run "fastboot devices" twice:
1st time:
Code:
c:\android-sdk\platform-tools>fastboot devices
J5AXB762E6689LF fastboot
2nd time:
Code:
c:\android-sdk\platform-tools>fastboot devices
???????????? fastboot
and the Android device shows Press any key to shut down
I found a workaround solution. Use a multi port USB hub regardless is USB 2.0 or 3.0, connect Android devices to USB hub and USB hub to PC. The problem shall solve regardless of how many times you run "fastboot devices"
Deeptesh Basak said:
I made a thread earlier regarding "Press any key to shut down" Fastboot error.
I have just bought a new laptop ,Acer Predator Helios 300. It has windows 10 1803 update.
I have no errors in device manager. It shows Asus ABD Interface and when in fastboot mode it shows ABD bootloader in Device manager. No errors.
When I enter the command fastboot devices.. it shows my device ID but as soon as I enter the command to flash twrp ,the fastboot mode on my phone closes and shows the message "Press any key to shut down" and basically the flashing doesn't start.
I figured out the error was due to the USB 3.0 port by digging through forums so I tried the USB 2.0 ports and sometimes I get the same error and other times I'm getting another error called remote error file larger than allowed size something something and the flashing fails.
I'm also unable to flash stock fastboot rom. I'm breaking my head over this the whole day. Frustrated I made this post. My old laptop has no issues but I don't know what is happening with my new one. All the correct drivers are loaded. Currently I'm using Pixel experience.
Click to expand...
Click to collapse
Try in other system which runs windows 7
Windows 10 sucks.same happen to me.
Me with Same problem ?
Try changing cables or ports. That worked for me
Deeptesh Basak said:
I made a thread earlier regarding "Press any key to shut down" Fastboot error.
I have just bought a new laptop ,Acer Predator Helios 300. It has windows 10 1803 update.
I have no errors in device manager. It shows Asus ABD Interface and when in fastboot mode it shows ABD bootloader in Device manager. No errors.
When I enter the command fastboot devices.. it shows my device ID but as soon as I enter the command to flash twrp ,the fastboot mode on my phone closes and shows the message "Press any key to shut down" and basically the flashing doesn't start.
I figured out the error was due to the USB 3.0 port by digging through forums so I tried the USB 2.0 ports and sometimes I get the same error and other times I'm getting another error called remote error file larger than allowed size something something and the flashing fails.
I'm also unable to flash stock fastboot rom. I'm breaking my head over this the whole day. Frustrated I made this post. My old laptop has no issues but I don't know what is happening with my new one. All the correct drivers are loaded. Currently I'm using Pixel experience.
Click to expand...
Click to collapse
I've the same problem..N i'm also trying to get solutions..but there's nothing.. Using Acer Nitro 5..
If you have an AMD chipset, forget about doing anything fastboot related because it just doesn't work. Even changing OS won't help. Otherwise, try using the original cable.
swarup16 said:
I've the same problem..N i'm also trying to get solutions..but there's nothing.. Using Acer Nitro 5..
Click to expand...
Click to collapse
same here...any solution?
farhanshaikh671 said:
If you have an AMD chipset, forget about doing anything fastboot related because it just doesn't work. Even changing OS won't help. Otherwise, try using the original cable.
Click to expand...
Click to collapse
I'm having two laptops and both of them have amd chipset..... I'm not facing any problem......and windows 10 doesn't suck...
The main problem is with the ports I tried with my Zephyrus M but it was not working.....but as I switch to my old laptop it worked at once......
I think the problem with usb 3.0 ( I think so)....
So I would recommend using a usb hub....it should work fine with any port......and will be Compatible with Amd and Intel.
MillerRoy7kundu said:
I'm having two laptops and both of them have amd chipset..... I'm not facing any problem......and windows 10 doesn't suck...
The main problem is with the ports I tried with my Zephyrus M but it was not working.....but as I switch to my old laptop it worked at once......
I think the problem with usb 3.0 ( I think so)....
So I would recommend using a usb hub....it should work fine with any port......and will be Compatible with Amd and Intel.
Click to expand...
Click to collapse
Sadly, didn't work for me even after trying everything; neither for many others here on xda. Probably an amd chipset specific problem.
Deeptesh Basak said:
I made a thread earlier regarding "Press any key to shut down" Fastboot error.
I have just bought a new laptop ,Acer Predator Helios 300. It has windows 10 1803 update.
I have no errors in device manager. It shows Asus ABD Interface and when in fastboot mode it shows ABD bootloader in Device manager. No errors.
When I enter the command fastboot devices.. it shows my device ID but as soon as I enter the command to flash twrp ,the fastboot mode on my phone closes and shows the message "Press any key to shut down" and basically the flashing doesn't start.
I figured out the error was due to the USB 3.0 port by digging through forums so I tried the USB 2.0 ports and sometimes I get the same error and other times I'm getting another error called remote error file larger than allowed size something something and the flashing fails.
I'm also unable to flash stock fastboot rom. I'm breaking my head over this the whole day. Frustrated I made this post. My old laptop has no issues but I don't know what is happening with my new one. All the correct drivers are loaded. Currently I'm using Pixel experience.
Click to expand...
Click to collapse
Same problem using acer nitro 5, windows 10 latest build with all cumulative updates
farhanshaikh671 said:
If you have an AMD chipset, forget about doing anything fastboot related because it just doesn't work. Even changing OS won't help. Otherwise, try using the original cable.
Click to expand...
Click to collapse
I have AMD CPU in both of my laptop and desktop but the device just connects in Desktop (as it has USB 2.0) but not in Laptop. I tried different cables and USB Hub also. But no success.
---------- Post added at 11:22 AM ---------- Previous post was at 11:20 AM ----------
MillerRoy7kundu said:
I'm having two laptops and both of them have amd chipset..... I'm not facing any problem......and windows 10 doesn't suck...
The main problem is with the ports I tried with my Zephyrus M but it was not working.....but as I switch to my old laptop it worked at once......
I think the problem with usb 3.0 ( I think so)....
So I would recommend using a usb hub....it should work fine with any port......and will be Compatible with Amd and Intel.
Click to expand...
Click to collapse
Yes. I also think the issue is USB 3.0 irrespective of AMD or Intel!
Invincible-Venom said:
I have AMD CPU in both of my laptop and desktop but the device just connects in Desktop (as it has USB 2.0) but not in Laptop. I tried different cables and USB Hub also. But no success.
---------- Post added at 11:22 AM ---------- Previous post was at 11:20 AM ----------
Yes. I also think the issue is USB 3.0 irrespective of AMD or Intel!
Click to expand...
Click to collapse
I have Intel CPU running Win 10 Pro which has 2 USB 3.0 ports - standard & charging. Commands work fine on either of those ports. But I maybe lucky since only USB 2.0 works for some.
Tianhe said:
I have Intel CPU running Win 10 Pro which has 2 USB 3.0 ports - standard & charging. Commands work fine on either of those ports. But I maybe lucky since only USB 2.0 works for some.
Click to expand...
Click to collapse
If USB 3.0 and Win 10 are also not the issue, then what is the main issue? For me it doesn't work in USB 3.0 slots. U have tried with USB Hub and different cables also, still no success!
Invincible-Venom said:
If USB 3.0 and Win 10 are also not the issue, then what is the main issue? For me it doesn't work in USB 3.0 slots. U have tried with USB Hub and different cables also, still no success!
Click to expand...
Click to collapse
If I knew exactly then this thread would have been solved ! I have already said that I may be lucky with USB 3.0 but the error could be due to various factors or a combination of those e.g. latest platform tool, specific drivers for specific hardware, not using elevated command prompt in requisite folder or using powershell, using minimal ADB or conflicting resources etc. And it may also be something entirely different so no one single solution.
Tianhe said:
If I knew exactly then this thread would have been solved ! I have already said that I may be lucky with USB 3.0 but the error could be due to various factors or a combination of those e.g. latest platform tool, specific drivers for specific hardware, not using elevated command prompt in requisite folder or using powershell, using minimal ADB or conflicting resources etc. And it may also be something entirely different so no one single solution.
Click to expand...
Click to collapse
I know why my issues persists, it's due to hardware. 2nd Gen Ryzen CPUs have fastboot driver issues.
Invincible-Venom said:
I know why my issues persists, it's due to hardware. 2nd Gen Ryzen CPUs have fastboot driver issues.
Click to expand...
Click to collapse
Good to know, i also have an old AMD setup with no fastboot issues. However, it runs on Athlon.
Tianhe said:
Good to know, i also have an old AMD setup with no fastboot issues. However, it runs on Athlon.
Click to expand...
Click to collapse
It's a coincidence. I too have same CPU an AMD Athlon II
I am not able to get Fastboot to reconginze my One Plus 6T. I have reinstalled the drivers numerous times to no avail. I have changed ports to no avail. I have change USB cables to no avail. Is anyone else having a similar problem and if so, any solution?
BTW, I am using a Windows 10 computer.
Also, I was able to install the International Version on my TMO variant One Plus 6T via the MSM tool method, so the drivers appear to be installed correctly.
Thank you in advance for any assistance.
phaino00 said:
I am not able to get Fastboot to reconginze my One Plus 6T. I have reinstalled the drivers numerous times to no avail. I have changed ports to no avail. I have change USB cables to no avail. Is anyone else having a similar problem and if so, any solution?
BTW, I am using a Windows 10 computer.
Also, I was able to install the International Version on my TMO variant One Plus 6T via the MSM tool method, so the drivers appear to be installed correctly.
Thank you in advance for any assistance.
Click to expand...
Click to collapse
Delete the drivers you have installed, boot into fastboot and have Windows automatically detect and install for you. Have you tried that? What source did you get your fastboot drivers from?
phaino00 said:
I am not able to get Fastboot to reconginze my One Plus 6T. I have reinstalled the drivers numerous times to no avail. I have changed ports to no avail. I have change USB cables to no avail. Is anyone else having a similar problem and if so, any solution?
BTW, I am using a Windows 10 computer.
Also, I was able to install the International Version on my TMO variant One Plus 6T via the MSM tool method, so the drivers appear to be installed correctly.
Thank you in advance for any assistance.
Click to expand...
Click to collapse
Msmdownload drivers are not the same at all, they are Qualcom drivers. Uninstall your fastboot drivers and let windows install them
phaino00 said:
I am not able to get Fastboot to reconginze my One Plus 6T. I have reinstalled the drivers numerous times to no avail. I have changed ports to no avail. I have change USB cables to no avail. Is anyone else having a similar problem and if so, any solution?
BTW, I am using a Windows 10 computer.
Also, I was able to install the International Version on my TMO variant One Plus 6T via the MSM tool method, so the drivers appear to be installed correctly.
Thank you in advance for any assistance.
Click to expand...
Click to collapse
Oh man, I had issues getting my 6t to connect to my PC when I first got my 6t. The answer for me was to plug my phone into a USB 2.0 port on the BACK of my PC instead of the front USB ports my PC has. Try using the back USB ports and let me know if that works for you!
Thank you all. I will try these suggestions later today and report back.
I tried the suggestions and still no success in fastboot connecting with my device. Thanks again for the suggestions.
After trying to multiple times reinstall the drivers, manually selecting "Android Bootloader Interface" did the trick for me on win10:
wtfandroid.com/fix-fastboot-device-not-recognised-problem/
Issue resolved. Selected Android Bootloader Interface in Device Manager and fastboot recognized my device. Unlocked Bootloader, installed TWRP and Magisk. Root achieved.
Thank you all!!!
jullev said:
After trying to multiple times reinstall the drivers, manually selecting "Android Bootloader Interface" did the trick for me on win10:
wtfandroid.com/fix-fastboot-device-not-recognised-problem/
Click to expand...
Click to collapse
Thank you! I can't believe I didn't think to check that.
it is solved for me oneplus 6t not recognized in fastboot
{ solved for me } hello brother, i got this problem also my head was about to explosing, install/uninstall drivers and adb drivers also, without any success, when the device is on normal mod the adb terminal can recognize it and in fastboot mod not recognize my devie (the list empty).
i was trying to install TWRP, so i have reboot my device to fastboot mod, and i didn't think about List of devices (because it not show my device) i wrote the comand to install TWRP directly so it success to install 100%,
so no need to write : adb devices when your device is in fastboot mod, it will not show you in the list, but you can apply what you want normally
good luck
hichemkanon said:
{ solved for me } hello brother, i got this problem also my head was about to explosing, install/uninstall drivers and adb drivers also, without any success, when the device is on normal mod the adb terminal can recognize it and in fastboot mod not recognize my devie (the list empty).
i was trying to install TWRP, so i have reboot my device to fastboot mod, and i didn't think about List of devices (because it not show my device) i wrote the comand to install TWRP directly so it success to install 100%,
so no need to write : adb devices when your device is in fastboot mod, it will not show you in the list, but you can apply what you want normally
good luck
Click to expand...
Click to collapse
Hello. I am having the same issues. But can you provide more steps on how to install TWRP. Can you provide the command/steps used to directly install TWRP?
Thank you.
phaino00 said:
Issue resolved. Selected Android Bootloader Interface in Device Manager and fastboot recognized my device. Unlocked Bootloader, installed TWRP and Magisk. Root achieved.
Thank you all!!!
Click to expand...
Click to collapse
Did this and still not able to recognize it in fastboot mode
sonice43 said:
Hello. I am having the same issues. But can you provide more steps on how to install TWRP. Can you provide the command/steps used to directly install TWRP?
Click to expand...
Click to collapse
Rijul30 said:
Did this and still not able to recognize it in fastboot mode
Click to expand...
Click to collapse
This is why I use Linux in my LOS Install Guide. You can boot Linux from a USB without installing it. Fastboot and ADB just work, without any drivers. Install TWRP, reboot and your PC will be back to windows. My guide covers installing TWRP.
Really need help. I'm going in circles and wasting a lot of time:
I'm attempting to root a OP6T A6013. Its already been unlocked.
My device is recognized when powered up as an ADB device.
But when i boot into the bootloader it isnt recognized as a fastboot device, and my laptop (Win 8.1) shows ""device malfunctioned. USB not recognized". I've also been trying to install the OP driver but I'm not sure its working correctly. But would that cause the problem with recognizing fastboot?
I've root my OP7Pro (twice, actually) and though I had some driver issues then eventually figured it out. But I never had issues with fastboot.
Any tips or direction?
Hey all , replying to share my solution to this exact problem I was having..
My OP6T (T-Mobile converted to international) was not showing in fastboot devices but showed in ADB.. after hours of searching google and XDA , I ended up just plugging my 6T into another computer and it worked! , instantly recognized my device without hassle.
So just a fyi, it could be something simple as switching USB ports or even another computer.
hopefully this helps if someone get's stuck at this point.
I had this issue with a OP8Pro... I went to Windows Update and selected View Optional Updates and found Android Bootloader Device on the list. I selected this to download, and then fastboot worked perfectly.
OhioYJ said:
This is why I use Linux in my LOS Install Guide. You can boot Linux from a USB without installing it. Fastboot and ADB just work, without any drivers. Install TWRP, reboot and your PC will be back to windows. My guide covers installing TWRP.
Click to expand...
Click to collapse
sudo fastboot oem unlock worked in linux in first shot while windows was unable to recognize the device.
Thanks a ton.
EDIT : Just to add .. this linux was in VM
OhioYJ said:
This is why I use Linux in my LOS Install Guide. You can boot Linux from a USB without installing it. Fastboot and ADB just work, without any drivers. Install TWRP, reboot and your PC will be back to windows. My guide covers installing TWRP.
Click to expand...
Click to collapse
I agree. Linux is far better when flashing android phones
anonymoustl said:
I had this issue with a OP8Pro... I went to Windows Update and selected View Optional Updates and found Android Bootloader Device on the list. I selected this to download, and then fastboot worked perfectly.
Click to expand...
Click to collapse
This worked for my OnePlus 9 Pro running Windows 10. Happy modding!
Tried miui 12 and after flashing rom the twrp is gone I tried to reflash it the same way I did first but sadly when I'm on fastboot PC can't detect it. also tried it with other softwares but same result. Device is fine and responds when open but not in fastboot mode. Currently running miui 11 .0.6 China stable. Stucked. Also all drivers are updated
Same here.
I accidentally flashed china stable 11.0.4 zip rom on my global device through twrp and upon booting up twrp was gone and when i plug in usb the pc doesn't detect anything. In order to make pc detect the phone via usb cable i have to reboot phone while plugging usb to laptop that way file transfer option shows up in laptop and adb works but fastboot doesn't work i can force boot to fastboot through adb but upon booting to fastboot the pc stucks at waiting for device. All the drivers are installed
Currently on china stable 11.0.6
Same issue indeed
That's exactly what's happening right now. I hope someone can help us
Quote me if u find any luck.
Same issues
That happens me sometimes. I only reboot the device into fastboot again, reboot the computer, and that it. This may change depending on your computer CPU, mine is AMD. And ussually I have to use a 2.0 USB or if it still does not work a USB 2.0 hub. I know the hub thing is strange but it worked for me when my pc does not detect the phone in fastboot. Hope it helps .
With my PC I have to open device manager, look for the device, usually has a yellow sign next to it. Right click on the device name, click update driver, click browse my computer for driver software, click let me pick from a list of available drivers on my computer and pick mtp USB device. Then I read it. I hope this helps.
daniml3 said:
That happens me sometimes. I only reboot the device into fastboot again, reboot the computer, and that it. This may change depending on your computer CPU, mine is AMD. And ussually I have to use a 2.0 USB or if it still does not work a USB 2.0 hub. I know the hub thing is strange but it worked for me when my pc does not detect the phone in fastboot. Hope it helps .
Click to expand...
Click to collapse
What hub?
Tried with multiple pcs with no success
epicblue8 said:
What hub?
Tried with multiple pcs with no success
Click to expand...
Click to collapse
I use a usb hub that is very old i guess, as it uses MiniUSB. By the way with multiple computer it should work, your error is very strange, I never saw it. A thing that may work is trying to use fastboot on a Linux system (no, with VMs no). So if you can flash a pen drive with a Ubuntu ISO or any linux distro, boot linux,install fastboot and check if it detects your phone.
daniml3 said:
I use a usb hub that is very old i guess, as it uses MiniUSB. By the way with multiple computer it should work, your error is very strange, I never saw it. A thing that may work is trying to use fastboot on a Linux system (no, with VMs no). So if you can flash a pen drive with a Ubuntu ISO or any linux distro, boot linux,install fastboot and check if it detects your phone.
Click to expand...
Click to collapse
Read my 1st reply to this op
Even file transfer option doesn't show up if i connect my phone via usb to laptop.
In order to make pc show file transfer option i have to reboot phone while connecting the phone to pc so.
That way i can use adb but as soon as i boot to fastboot via cmd pc doesn't detect the fastboot mode.
Tried with 3 laptops
Issue Fixed
epicblue8 said:
Same here.
I accidentally flashed china stable 11.0.4 zip rom on my global device through twrp and upon booting up twrp was gone and when i plug in usb the pc doesn't detect anything. In order to make pc detect the phone via usb cable i have to reboot phone while plugging usb to laptop that way file transfer option shows up in laptop and adb works but fastboot doesn't work i can force boot to fastboot through adb but upon booting to fastboot the pc stucks at waiting for device. All the drivers are installed
Currently on china stable 11.0.6
Click to expand...
Click to collapse
Dude I fixed it and I managed to flash global and maybe reflash EU when miui 12 stable arrive
Try another type c cord preferable the original one. I just change the cord and everything went fine fastboot can now be detected via "fastboot devices".
Chipotle crackers said:
Dude I fixed it and I managed to flash global and maybe reflash EU when miui 12 stable arrive
Try another type c cord preferable the original one. I just change the cord and everything went fine fastboot can now be detected via "fastboot devices".
Click to expand...
Click to collapse
Not with original but tried 3 type c cables and 3 pcs
epicblue8 said:
Quote me if u find any luck.
Click to expand...
Click to collapse
hey have find any solutions? we have the same problem
Hi,
I have unlocked Xiaomi Mix 3 5g. Phone never been rooted and I've never tried to apply custom ROM. SInce I've got it I'm on original software: at the moment MIUI Global 12.0.3. I've only had TWRP recovery applied but this wiped out ant went back to original recovery after my phone updated itself last time to 12.0.3.
Basically I've had phone ready to apply custom ROM but never done it accualy. I was always on original MIUI and TWRP recovery was applied to my phone.
A the moment after I connect phone to PC using cable, smartphone discovers PC connection but on PC I cannot see internal memory of my phone. And yes I have all needed drivers installed and I've tried using 3 different cables...
I think that may happened after my phone updated itself last time and went back to original recovery...
The worst problem is that now I cannot flash back to TWRP. When phone is connected to PC and I go to CMD, typing ''adb boot fastboot'' command is working and phone reboots itself to FASTBOOT MODE but once I'm in fastboot mode commands are not working and on flash attempt I only see < waiting for any device >
Any solution for this ?
Try using usb 2.0 ports or different computers.
I sometimes get mine to flash by inputting the command first then plugging the phone in afterwards.